just got my herbert solid roller lifters for my small block stroker,which way does the lifter link go?mike

Link bar goes on the cylinder side of the valley.

The v in the bar would point towards the carb if it was there.

herbert had told me the opposite on the phone,thats why i was questioning it.i dont have the heads on it yet to check pushrod angle.

Are those the Drop-im lifters?? If so,can you post some pics??

mikes duster;yes drop in stylelifter, i will post some pics ;it wont be until after 11;30 when i get home from work.

another pic

bump for mikes duster

When you drop them in you see why the V points towards the carb. It is there to clear part of the block where a straight T-bar won't work.

Will those pushrod oil? Anyone running these for a Mopar with success?

No on the push rod oil. I have had them in since 08 with no problems yet

Thanks HP!!!! Can you post some pic with them in your block??

I know on my 360 block i had to do some minor grinding with a die grinder to get those lifters into the lifter bores. the lifters adjacent to the #8 cylinder took the most work, but it wasn't anything i'd worry about or wouldn't do again.-Andy

I had to grind the block to get my comp 828's to fit. I think that is standard practice unless you get the MEGA bucks new reverse bar lifters. I will always wonder why turning the bar around adds $200 to the price of a set of lifters.....Looks like Herbert has some business coming his way.