Racer Brown cams - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Racer Brown cams

Print Thread

Racer Brown cams #611860 02/12/10 09:02 PM 02/12/10 09:02 PM
Joined: May 2004 Posts: 533 North Dakota 440abody OP mopar
440abody OP mopar Joined: May 2004 Posts: 533 North Dakota	Anybody here using one, and what are your thoughts/opinions? 73 Dart Swinger 440/727 8.75 w/3.55's 34 Ford 3w coupe with a soon to be 1958 392HEMI!

Re: Racer Brown cams [Re: 440abody] #611861 02/12/10 11:54 PM 02/12/10 11:54 PM
Joined: Dec 2003 Posts: 5,314 Carstairs, Alberta, Canada dave571 master
dave571 master Joined: Dec 2003 Posts: 5,314 Carstairs, Alberta, Canada	There have been a few threads on this lately. search racer brown and you'll likely come up with something. I have used, and still use, racer brown cams. Jim gives great service, and the cams make good power.

Re: Racer Brown cams [Re: 440abody] #611862 02/13/10 08:52 AM 02/13/10 08:52 AM
Joined: Sep 2006 Posts: 1,139 West Tennessee R rbstroker super stock
rbstroker super stock R Joined: Sep 2006 Posts: 1,139 West Tennessee	He custom ground one for my big block stroker and I have been very happy with it. This is the land of the free because of the brave

Re: Racer Brown cams [Re: rbstroker] #611863 02/13/10 05:42 PM 02/13/10 05:42 PM
Joined: May 2004 Posts: 533 North Dakota 440abody OP mopar
440abody OP mopar Joined: May 2004 Posts: 533 North Dakota	Specifically looking at the SSH-25 for my Dart with a 440/727 and 3.55's. 73 Dart Swinger 440/727 8.75 w/3.55's 34 Ford 3w coupe with a soon to be 1958 392HEMI!

Re: Racer Brown cams [Re: 440abody] #611864 02/13/10 06:06 PM 02/13/10 06:06 PM
Joined: Feb 2009 Posts: 207 People's Republic of Mass. B Belvedere2 enthusiast
Belvedere2 enthusiast B Joined: Feb 2009 Posts: 207 People's Republic of Mass.	I run that cam in my 340. Pulls hard with a nice idle.

Re: Racer Brown cams [Re: Belvedere2] #611865 02/13/10 06:48 PM 02/13/10 06:48 PM
Joined: Sep 2003 Posts: 1,535 North Las Vegas chewy pro stock
chewy pro stock Joined: Sep 2003 Posts: 1,535 North Las Vegas	Every engine I build I put a Racer Brown Cam into. I havent had one fail yet. Jim's currently grind a custom 273 Cam for my Dart. Based on ST-1 Mechanical profile. Should arrive any day. Cant wait. .... Anyhow. Jim is doing a great job and I will continue to use his cam's for the forseeable future.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1