727 END PLAY - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 727 END PLAY

Print Thread

727 END PLAY #610883 02/11/10 09:02 PM 02/11/10 09:02 PM
Joined: Feb 2010 Posts: 9 Texas R redram95 OP member
redram95 OP member R Joined: Feb 2010 Posts: 9 Texas	Did not check end play before tear down. After rebuild I have .096 end play with both the .102 shims installed. Any ideas?

Re: 727 END PLAY [Re: redram95] #610884 02/11/10 09:06 PM 02/11/10 09:06 PM
Joined: Jan 2003 Posts: 25,720 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,720 Rio Linda, CA	What year? The INTERNET, the MISinformation superhighway

Re: 727 END PLAY [Re: John_Kunkel] #610885 02/11/10 09:09 PM 02/11/10 09:09 PM
Joined: Feb 2010 Posts: 9 Texas R redram95 OP member
redram95 OP member R Joined: Feb 2010 Posts: 9 Texas	1987 3 speed non lock-up

Re: 727 END PLAY [Re: redram95] #610886 02/11/10 09:21 PM 02/11/10 09:21 PM
Joined: Jan 2003 Posts: 25,720 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,720 Rio Linda, CA	Are there two thrust washers on the output shaft? Sometinmes the thin steel washer goes missing and the 3-eared washer by itself won't provide enough thickness. 5798292-Inputthrwashers.jpg (144 downloads)

Re: 727 END PLAY [Re: John_Kunkel] #610887 02/11/10 09:27 PM 02/11/10 09:27 PM
Joined: Feb 2010 Posts: 9 Texas R redram95 OP member
redram95 OP member R Joined: Feb 2010 Posts: 9 Texas	I have the three tab washer and the shim,

Re: 727 END PLAY [Re: redram95] #610888 02/12/10 12:29 AM 02/12/10 12:29 AM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	is that the play in the output shaft or the input shaft?

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1