|
stealth head flow #'s
#59326
05/18/08 08:18 PM
05/18/08 08:18 PM
|
Anonymous
OP
Unregistered
|
Anonymous
OP
Unregistered
|
anybody flowed a set of stealth heads yet? i got 300cfm int & 231cfm ex at .700 lift on a 1020 superflow.
|
|
|
Re: stealth head flow #'s
#59327
05/18/08 08:46 PM
05/18/08 08:46 PM
|
Anonymous
OP
Unregistered
|
Anonymous
OP
Unregistered
|
forgot to add that these #'s are for a stock entrance and it was flowed on a 4.500 bore stand.
|
|
|
Re: stealth head flow #'s
#59328
05/18/08 10:50 PM
05/18/08 10:50 PM
|
Joined: Feb 2003
Posts: 21,318 Manitoba, Canada
DaytonaTurbo
Too Many Posts
|
Too Many Posts
Joined: Feb 2003
Posts: 21,318
Manitoba, Canada
|
Dwayne, aka fast68plymouth flowed the stealth heads, here's what he got, and compared them to E-rpm heads he flowed as well: Quote:
4.375 bore, 28" test pressure, radius plate on intake, no tube on exhaust:
average flow for #5 and #7 cylinder
lift----I/E .100--63.8/49.0 .200-140.5/104.1 .300-207.8/139.7 .400-239.2/164.6 .450-248.1/172.5 .500-256.1/177.8 .550-261.5/182.6 .600-265.3/188.2 .650-267.3/191.5 .700-267.3/195.8
here is an OOTB E head i tested recently, also the average for a left and right cylinder:
lift----I/E .100--66.1/50.8 .200-138.3/105.4 .300-203.8/140.5 .400-243.1/163.6 .450-258.0/170.4 .500-265.7/178.6 .550-272.3/185.3 .600-276.5/190.3 .650-276.1/194.6 .700-275.7/197.3
|
|
|
|
|
|