Which headgaskets should I use? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Which headgaskets should I use?

Print Thread

Which headgaskets should I use? #59251 05/18/08 06:49 PM 05/18/08 06:49 PM
Joined: Nov 2004 Posts: 23 Connecticut J JFAbody OP member
JFAbody OP member J Joined: Nov 2004 Posts: 23 Connecticut	putting in performer RPM heads on my 340. Which head gaskets should I use? any that I shouldn't? 72 Duster 340 4 Speed

Re: Which headgaskets should I use? [Re: JFAbody] #59252 05/19/08 09:45 PM 05/19/08 09:45 PM
Joined: Jun 2006 Posts: 3,075 Eastern Ohio mopowergtx master
mopowergtx master Joined: Jun 2006 Posts: 3,075 Eastern Ohio	Since I take it your just doing a head swap on a running motor then I'd use the .039 thick FelPro's permatorque's.

Re: Which headgaskets should I use? [Re: mopowergtx] #59253 05/19/08 10:04 PM 05/19/08 10:04 PM
Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska	If you are at zero deck & those heads are closed chambers the .039 ones mentioned would be just perfect. be sure & check the part #'s & thicknesses as the ones I have(felpro blue) are alot thicker than .039", there may be 2 different ones(.054)??,I'd have to go measure the ones I have. live every 24 hour block of time like it's your last day on earth

Re: Which headgaskets should I use? [Re: RapidRobert] #59254 05/19/08 11:42 PM 05/19/08 11:42 PM
Joined: Jan 2003 Posts: 20,748 A collage of whims topside Too Many Posts
topside Too Many Posts Joined: Jan 2003 Posts: 20,748 A collage of whims	FelPro composite gaskets, # is either 1008 or 1009. Never a problem, even at 13.0:1.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1