Which intake? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Which intake?

Print Thread

Which intake? #466348 09/12/09 01:01 PM 09/12/09 01:01 PM
Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI Sledge_57 OP master
Sledge_57 OP master Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI	I'm thinking of experimenting with a single plane intake on my heap, which one do you guys like best? 470 - low deck 10.1 585 lift, 259@.050 duration solid lifter 4250 - 4500 converter 4.30 gears 850 MD carb (for now........) Thanks Doug 1967 "Pedal Car" 500" low deck , TF 727, 4.30 Locker Best to Date: 11.67 @ 114.9 1.64 60ft "Kids in cars cause accidents. Accidents in cars cause kids..."

Re: Which intake? [Re: Sledge_57] #466349 09/12/09 01:08 PM 09/12/09 01:08 PM
Joined: Oct 2005 Posts: 976 ontario canada mac56 super stock
mac56 super stock Joined: Oct 2005 Posts: 976 ontario canada	edelbrock victor

Re: Which intake? [Re: Sledge_57] #466350 09/12/09 01:12 PM 09/12/09 01:12 PM
Joined: May 2003 Posts: 854 Bloomingdale , OH super451b super stock
super451b super stock Joined: May 2003 Posts: 854 Bloomingdale , OH	I'm using a TM-6 on my 451 (also used it on the 383 in sig) I also tried an M-1, and a Torker . The TM-6 was a little better than the M-1 and a good bit better than the Torker.

Re: Which intake? [Re: super451b] #466351 09/12/09 01:14 PM 09/12/09 01:14 PM
Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI Sledge_57 OP master
Sledge_57 OP master Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI	Quote: I'm using a TM-6 on my 451 (also used it on the 383 in sig) I also tried an M-1, and a Torker . The TM-6 was a little better than the M-1 and a good bit better than the Torker. TM-6 the old Tarantula intake? Thinking about the Victor or M1, leaning toward Victor at the moment............ Doug 1967 "Pedal Car" 500" low deck , TF 727, 4.30 Locker Best to Date: 11.67 @ 114.9 1.64 60ft "Kids in cars cause accidents. Accidents in cars cause kids..."

Re: Which intake? [Re: Sledge_57] #466352 09/12/09 01:22 PM 09/12/09 01:22 PM
Joined: May 2003 Posts: 854 Bloomingdale , OH super451b super stock
super451b super stock Joined: May 2003 Posts: 854 Bloomingdale , OH	Yes , the old Tarantula. I don't have any real world experience with the Victor yet.

Re: Which intake? [Re: Sledge_57] #466353 09/12/09 01:44 PM 09/12/09 01:44 PM
Joined: Feb 2006 Posts: 1,949 land of 10,000______'s B BDS871Cuda top fuel
BDS871Cuda top fuel B Joined: Feb 2006 Posts: 1,949 land of 10,000______'s	Quote: I'm thinking of experimenting with a single plane intake on my heap, which one do you guys like best? 470 - low deck 10.1 585 lift, [Email]259@.050[/Email] duration solid lifter 4250 - 4500 converter 4.30 gears 850 MD carb (for now........) Thanks A lot of my stuff was close to yours. 440 10.5-1/ Ultradyn .590-.613/ 4500 stall 4.88 D-60 with 31X18.5 QTP's 825 Race Demon/ MDS/ M-1 intake/ car ran 11.16 The M-1 seem to make good power up to 6300 rpm. I would think the Victor should do just as good. I picked the M-1 so it would fit under my hood. 5478146-Trump_lg.jpg (49 downloads) Snap your neck, mega G-force launch, is all I want!

Re: Which intake? [Re: Sledge_57] #466354 09/13/09 08:07 AM 09/13/09 08:07 AM
Joined: Feb 2005 Posts: 4,310 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,310 Prospect, PA	What carb and intake do you have now?

Re: Which intake? [Re: BSB67] #466355 09/13/09 07:49 PM 09/13/09 07:49 PM
Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI Sledge_57 OP master
Sledge_57 OP master Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI	Quote: What carb and intake do you have now? Performer RPM and BG MD-850 Doug 1967 "Pedal Car" 500" low deck , TF 727, 4.30 Locker Best to Date: 11.67 @ 114.9 1.64 60ft "Kids in cars cause accidents. Accidents in cars cause kids..."

Re: Which intake? [Re: Sledge_57] #466356 09/13/09 08:24 PM 09/13/09 08:24 PM
Joined: Oct 2007 Posts: 535 Ohio racerAL mopar
racerAL mopar Joined: Oct 2007 Posts: 535 Ohio	Quote: Quote: What carb and intake do you have now? Performer RPM and BG MD-850 hey Sledge -..are you go to Norwalk this week-end?...if so i have a M1 that your welcome to try....i ran 11.30's-40's with it..i recently switched and it's just sitting on the shelf..let me know 5480580-16-140.JPG (48 downloads) -1967 Plymouth Satellite #3555 446 cid on E-85 best 1/4 et 10.577 @ 127.58 best 1/8 et 6.722 @ 100.68 best 60ft. 1.419

Re: Which intake? [Re: racerAL] #466357 09/13/09 09:05 PM 09/13/09 09:05 PM
Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI Sledge_57 OP master
Sledge_57 OP master Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI	Quote: Quote: Quote: What carb and intake do you have now? Performer RPM and BG MD-850 hey Sledge -..are you go to Norwalk this week-end?...if so i have a M1 that your welcome to try....i ran 11.30's-40's with it..i recently switched and it's just sitting on the shelf..let me know Thanks for the offer, I might be at Norwalk but the car will not for sure. I think I have a job in the area at the end of the week, if so I will be dropping in. Norwalk would be a heck of a drive from my house with 4.30 gears Thanks again for the offer Doug 1967 "Pedal Car" 500" low deck , TF 727, 4.30 Locker Best to Date: 11.67 @ 114.9 1.64 60ft "Kids in cars cause accidents. Accidents in cars cause kids..."

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1