64 Plymouth Fury project - Moparts Forums

Register Log In Moparts Forums Member Projects & Survivor Pictures 64 Plymouth Fury project

Print Thread

Page 1 of 8

1

2

3

4

5

6

7

8

64 Plymouth Fury project #361112 06/28/09 09:46 PM 06/28/09 09:46 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	This is my first real project car. I did have a 70 383 cuda that I sold at the nats back in 91 to build our house. I have owned chevys ever since then. My nieghbor bought this 64 out of California about 4 or 5 years ago.He lost intrest so I got it from him better than a year ago. I took it down to a bare roller and sent it to the body shop. I have never taken a car apart like this before so it is a little scary. This is some of the stuff I've restored while waiting to get the car back. It's a little out of order because all the pics of the car are to big to post, but i'm working on that and will post later. Thanks to all who have answered some of my stupid questions on here, There will be more.

Re: 64 Plymouth Fury project [Re: mopar rookie] #361113 06/28/09 09:51 PM 06/28/09 09:51 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	This is some before pics of my heater box. 5320813-119_1969.JPG (592 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361114 06/28/09 09:53 PM 06/28/09 09:53 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	2nd pic 5320824-119_1998.JPG (367 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361115 06/28/09 09:56 PM 06/28/09 09:56 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	This is the new heater core from Cap A Radiator and new insulation installed. 5320835-120_2084.JPG (279 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361116 06/28/09 10:00 PM 06/28/09 10:00 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Heater box painted and ready to install. 5320840-121_2121.JPG (268 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361117 06/28/09 10:04 PM 06/28/09 10:04 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	This was the brake assembly that was in the car. The brakes were horrible on this car. I was told that this was a power brake assembly but i had manual brakes and that was the reason. 5320853-119_1980.JPG (274 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361118 06/28/09 10:08 PM 06/28/09 10:08 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Now i have the correct manual assembly. I love detail gray from eastwood. 5320867-121_2114.JPG (283 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361119 06/28/09 10:12 PM 06/28/09 10:12 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	The before e brake. I think a glass bead cabinet is a must have item. 5320876-119_1952.JPG (238 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361120 06/28/09 10:15 PM 06/28/09 10:15 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	I wire wheeled the ebrake cable on the bench grinder and satin cleared it. Looks new. 5320884-121_2131.JPG (256 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361121 06/28/09 10:25 PM 06/28/09 10:25 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	The wiper motor before. Really these before pics were taken so i could put things back together. 5320904-120_2041.JPG (204 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361122 06/28/09 10:28 PM 06/28/09 10:28 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Painted the arms with more detail gray and painted the motor cover. Thats about everything that goes under the dash. 5320916-121_2116.JPG (253 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361123 07/03/09 02:05 PM 07/03/09 02:05 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got the steering column back and put back together. The car is being painted the original color which is med turquise metalic. 5331043-120_2093.JPG (230 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361124 07/03/09 02:11 PM 07/03/09 02:11 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	another pic 5331053-120_2092.JPG (210 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361125 07/03/09 02:18 PM 07/03/09 02:18 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	I accually got a great deal on a mint steering wheel off ebay. It was only listed for 5 min when I stumbled on to it with a cheap buy it now. 5331068-120_2094.JPG (264 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361126 07/03/09 02:22 PM 07/03/09 02:22 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Going to manual steering and had Steer & Gear out of Columbus rebuild it. 5331073-120_2095.JPG (174 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361127 07/03/09 02:29 PM 07/03/09 02:29 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Front seat recovered and I restored the tracks. The covers are from Legendary. 5331088-120_2088.JPG (271 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361128 07/03/09 02:30 PM 07/03/09 02:30 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Back seat 5331091-120_2087.JPG (186 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361129 07/03/09 02:34 PM 07/03/09 02:34 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Seat belts restored by Ssnake Oly. I recommend them, they did a great job. 5331103-121_2120.JPG (215 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361130 07/07/09 09:44 PM 07/07/09 09:44 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Gauge cluster restored, clock has been fixed now and painted all the needles. Had Mr. G's rechrome the plastic. 5339690-121_2126.JPG (282 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361131 07/07/09 09:51 PM 07/07/09 09:51 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Trunk stuff ready ready to go 5339704-121_2136.JPG (263 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361132 07/09/09 12:05 AM 07/09/09 12:05 AM
Joined: Jul 2005 Posts: 1,044 minnesota P president61 super stock
president61 super stock P Joined: Jul 2005 Posts: 1,044 minnesota	Nice detailing. good job on documenting with the pics also

Re: 64 Plymouth Fury project [Re: president61] #361133 07/09/09 08:39 AM 07/09/09 08:39 AM
Joined: Aug 2004 Posts: 8,526 Tenn. jrwoodjoe master
jrwoodjoe master Joined: Aug 2004 Posts: 8,526 Tenn.	I agree...for a "first project car" your tackling it like a pro. Everything looks GREAT!! Keep the pics coming. Joe 65 Barracuda 70 Challenger

Re: 64 Plymouth Fury project [Re: jrwoodjoe] #361134 07/09/09 05:26 PM 07/09/09 05:26 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Thanks guys. I have gotten most of the way things are done from this web site. I am trying to do things right since its down this far. I just need to get the car back so I can start bolting things back on, shouldn't be to much longer. The car is getting buffed now.

Re: 64 Plymouth Fury project [Re: mopar rookie] #361135 07/09/09 05:32 PM 07/09/09 05:32 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	New Kyb rear shocks. I sanded them down and painted them GM gray, but don't tell anybody. 5343254-121_2140.JPG (233 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361136 07/09/09 05:34 PM 07/09/09 05:34 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Trans crossmember 5343258-121_2132.JPG (241 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361137 07/09/09 05:36 PM 07/09/09 05:36 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	New driveshaft 5343261-121_2101.JPG (181 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361138 09/13/09 09:29 PM 09/13/09 09:29 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Before the car went to the body shop I steam cleaned the underneath of the car. 5480750-Picture038.jpg (332 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361139 09/13/09 09:45 PM 09/13/09 09:45 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	I know why everyone wants California cars now. You can't find them this rust free in Ohio. Both front fenders were in perfect condition. 5480782-Picture066.jpg (303 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361140 09/13/09 09:49 PM 09/13/09 09:49 PM
Joined: Sep 2006 Posts: 1,218 So Dak GOLDENCOMMANDO pro stock
GOLDENCOMMANDO pro stock Joined: Sep 2006 Posts: 1,218 So Dak	More pictures please...

Re: 64 Plymouth Fury project [Re: mopar rookie] #361141 09/13/09 09:53 PM 09/13/09 09:53 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Cowl area was also perfect. 5480799-Picture065.jpg (276 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361142 09/13/09 09:57 PM 09/13/09 09:57 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Bottom of doors. 5480806-Picture067.jpg (220 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361143 09/13/09 10:02 PM 09/13/09 10:02 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	This was the only rust that was on the car. Not bad for 45 years old. 5480823-Picture054.jpg (307 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361144 09/13/09 10:24 PM 09/13/09 10:24 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Well after nearly a year and a half I finally got the bring the car home. 5480891-121_2173.JPG (331 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361145 09/13/09 10:26 PM 09/13/09 10:26 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Another 5480896-121_2174.JPG (295 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361146 09/13/09 10:30 PM 09/13/09 10:30 PM
Joined: Oct 2008 Posts: 1,894 Mira Loma, CA 69B3GT top fuel
69B3GT top fuel Joined: Oct 2008 Posts: 1,894 Mira Loma, CA	Quote: Another i see a chevy Cool car, looks great

Re: 64 Plymouth Fury project [Re: mopar rookie] #361147 09/13/09 10:30 PM 09/13/09 10:30 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Front pic 5480907-121_2178.JPG (321 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361148 09/13/09 10:32 PM 09/13/09 10:32 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Engine compartment. 5480912-121_2180.JPG (288 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361149 09/13/09 10:33 PM 09/13/09 10:33 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Trunk 5480917-121_2176.JPG (236 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361150 09/13/09 10:39 PM 09/13/09 10:39 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got two of them, thats why I'm the Mopar rookie. 5480934-121_2105.JPG (332 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361151 09/20/09 12:39 PM 09/20/09 12:39 PM
Joined: Feb 2004 Posts: 34,866 S.E. South Dakota ! bigdad Still Posting A Lot
bigdad Still Posting A Lot Joined: Feb 2004 Posts: 34,866 S.E. South Dakota !	You are doing great on the 64, looks awesome ! 5493963-thumbsup.jpg (235 downloads) The lips of fools bring them strife, and their mouths invite a beating.Proverbs 18:6

Re: 64 Plymouth Fury project [Re: bigdad] #361152 09/21/09 11:33 AM 09/21/09 11:33 AM
A Anonymous Unregistered
Anonymous Unregistered A	Looks great! My '63 was originally that color.

Re: 64 Plymouth Fury project #361153 09/27/09 12:40 PM 09/27/09 12:40 PM
Joined: Sep 2009 Posts: 4 central ohio H headwrench member
headwrench member H Joined: Sep 2009 Posts: 4 central ohio	i see a big scratch down the side. looks like its from a cowboy belt buckle. you need to sharpen your detail skills too. LOL looks good bro, but it needs a HEMI.

Re: 64 Plymouth Fury project [Re: headwrench] #361154 09/28/09 09:30 AM 09/28/09 09:30 AM
Joined: Nov 2004 Posts: 1,923 Medina, Ohio HEMICUDA top fuel
HEMICUDA top fuel Joined: Nov 2004 Posts: 1,923 Medina, Ohio	Don't forget these. You'll need tail light bezels and lenses to equal that nice paint work. 5510431-165-64B.gif (265 downloads)

Re: 64 Plymouth Fury project [Re: HEMICUDA] #361155 09/28/09 09:31 AM 09/28/09 09:31 AM
Joined: Nov 2004 Posts: 1,923 Medina, Ohio HEMICUDA top fuel
HEMICUDA top fuel Joined: Nov 2004 Posts: 1,923 Medina, Ohio	And lenses. 5510433-165-64L.gif (167 downloads)

Re: 64 Plymouth Fury project [Re: HEMICUDA] #361156 10/02/09 05:47 PM 10/02/09 05:47 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got my axles today from Mosher and buttoned up the rearend. New brake lines from The Right Stuff. 5520718-121_2191.JPG (281 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361157 10/02/09 05:54 PM 10/02/09 05:54 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Housing was powdercoated. Suregrip 3.55 gears, 3in wheel studs. 5520731-121_2189.JPG (220 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361158 10/02/09 06:20 PM 10/02/09 06:20 PM
Joined: Aug 2004 Posts: 8,526 Tenn. jrwoodjoe master
jrwoodjoe master Joined: Aug 2004 Posts: 8,526 Tenn.	Looks like it was/is a really solid car. Like the color too. Can't wait to see it when it's done. Joe 65 Barracuda 70 Challenger

Re: 64 Plymouth Fury project #361159 10/02/09 08:44 PM 10/02/09 08:44 PM
Joined: Sep 2009 Posts: 4 central ohio H headwrench member
headwrench member H Joined: Sep 2009 Posts: 4 central ohio	when its done it will look like a nova

Re: 64 Plymouth Fury project [Re: headwrench] #361160 10/02/09 09:36 PM 10/02/09 09:36 PM
Joined: Dec 2005 Posts: 1,261 Canada L Lugnutz pro stock
Lugnutz pro stock L Joined: Dec 2005 Posts: 1,261 Canada	Awesome job Jan...............great looking car and great detail work...

Re: 64 Plymouth Fury project [Re: Lugnutz] #361161 10/06/09 10:37 AM 10/06/09 10:37 AM
Joined: Jan 2003 Posts: 9,857 Cambridge Idaho RUMBLON master
RUMBLON master Joined: Jan 2003 Posts: 9,857 Cambridge Idaho	great looking 64. Its going to put those two chebbies to shame. Dave

Re: 64 Plymouth Fury project [Re: RUMBLON] #361162 10/07/09 06:32 PM 10/07/09 06:32 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Sent some interior parts out to get dyed. 5531043-120_2019.JPG (204 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361163 10/07/09 06:43 PM 10/07/09 06:43 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	I got them all back today and they came out great. I used Eric from E's auto interior air brushing out of Texas. He does all of Ssnake oyl's painting. He will work with you on getting sample colors to chose from. If you need his number PM me and i will get it to you. 5531065-121_2195.JPG (195 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361164 11/20/09 10:10 PM 11/20/09 10:10 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Been laying on my back for a couple of weeks with hot tar falling in my face. I scraped all under coat off of the floor pan. Some of the original undercoat had already been scraped and I wanted to square it up. Not a fun job. I resprayed it with 3M undercoat. 5617425-Picture034.jpg (216 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361165 11/20/09 10:13 PM 11/20/09 10:13 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Freshened up the original undercoat in the wheel wells with the 3M also 5617434-Picture038.jpg (212 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361166 11/20/09 10:16 PM 11/20/09 10:16 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got the rearend installed. 5617439-Picture032.jpg (214 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361167 11/20/09 10:18 PM 11/20/09 10:18 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	New super stock springs and hardware. 5617447-Picture033.jpg (193 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361168 11/20/09 10:25 PM 11/20/09 10:25 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Front hangers. I think I am going to move the springs down to the lower hole. I put tires on it and put it on the ground and its not as high up as I thought it would be. Hard to tell with no motor though. Im also going to have some pinion angle issues that I will have to deal with later. 5617467-Picture037.jpg (205 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361169 11/30/09 08:36 PM 11/30/09 08:36 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Picked up some items from the chromer. I used CustomChrome Plating out of Grafton Ohio. Everything looks good and Im happy with there work 5637099-Picture026.jpg (199 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361170 01/04/10 11:44 PM 01/04/10 11:44 PM
Joined: Feb 2004 Posts: 34,866 S.E. South Dakota ! bigdad Still Posting A Lot
bigdad Still Posting A Lot Joined: Feb 2004 Posts: 34,866 S.E. South Dakota !	The lips of fools bring them strife, and their mouths invite a beating.Proverbs 18:6

Re: 64 Plymouth Fury project [Re: bigdad] #361171 01/05/10 12:04 AM 01/05/10 12:04 AM
A Anonymous Unregistered
Anonymous Unregistered A	That under coating looks good.

Re: 64 Plymouth Fury project [Re: ] #361172 01/06/10 11:16 PM 01/06/10 11:16 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Sorry bigdad....just haven't been motavated lately but I have got some things done. Maybe you just gave me the nudge I needed to get back at it! Here is a few pics of my progress. 5717152-Picture047.jpg (209 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361173 01/06/10 11:27 PM 01/06/10 11:27 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Sealed the floor with KBS rust seal. 5717202-Picture039.jpg (144 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361174 01/06/10 11:34 PM 01/06/10 11:34 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	I decided to use Dynamat on the floor. It's actually Jegs brand but it was eighty bucks cheaper than Dynamat. 5717229-Pictures3003.jpg (179 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361175 01/06/10 11:40 PM 01/06/10 11:40 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	I don't know if it makes much of a difference using this stuff but I had in my mind I wanted it. I guess I watched Overhaulin to many times. 5717252-Pictures3004.jpg (156 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361176 01/06/10 11:42 PM 01/06/10 11:42 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Headliner installed. 5717259-Pictures3002.jpg (175 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361177 01/06/10 11:48 PM 01/06/10 11:48 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got all of the trim installed on the door panels. 5717273-Pictures3011.jpg (168 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361178 01/06/10 11:49 PM 01/06/10 11:49 PM
Joined: Feb 2004 Posts: 34,866 S.E. South Dakota ! bigdad Still Posting A Lot
bigdad Still Posting A Lot Joined: Feb 2004 Posts: 34,866 S.E. South Dakota !	LOOKS GRRRRRRRRR 8 !!!! Keep at it !! The lips of fools bring them strife, and their mouths invite a beating.Proverbs 18:6

Re: 64 Plymouth Fury project [Re: bigdad] #361179 01/25/10 10:47 PM 01/25/10 10:47 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got a little bit more done this week. Got new gaskets and polished the lenses on the back up and tail light assemblies. 5760117-Picture028.jpg (149 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361180 01/25/10 10:49 PM 01/25/10 10:49 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Tail lights. 5760121-Picture030.jpg (157 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361181 01/25/10 10:50 PM 01/25/10 10:50 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Installed. 5760124-Pictures3018.jpg (143 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361182 01/25/10 10:52 PM 01/25/10 10:52 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Also got the back glass installed and the window trim. 5760132-Pictures3014.jpg (154 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361183 01/25/10 11:41 PM 01/25/10 11:41 PM
Joined: Mar 2004 Posts: 375 An Island in the Pacific N.W. moopa enthusiast
moopa enthusiast Joined: Mar 2004 Posts: 375 An Island in the Pacific N.W.	What a beautiful job you're doing! Mark 2015 TorRed Challenger Hellcat,A8 2013 Plum Crazy Challenger SRT8,6 Spd 2013 Black Challenger R/T Classic,auto (2)72 Satellites, one on hold,one under resto on the rotisserie.

Re: 64 Plymouth Fury project [Re: mopar rookie] #361184 01/26/10 10:36 AM 01/26/10 10:36 AM
Joined: Jan 2003 Posts: 549 ohio 70shaker6pk super gas
70shaker6pk super gas Joined: Jan 2003 Posts: 549 ohio	Looking real nice, great work!

Re: 64 Plymouth Fury project [Re: 70shaker6pk] #361185 01/26/10 10:54 AM 01/26/10 10:54 AM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Thanks for the kind words. I will say it's been fun and frustrating at the same time. Trying now to get the windows adjusted to where they roll up right. I had them rolling up perfect into the rubber seal until I put the door panels on that changed everything. Try again tonight

Re: 64 Plymouth Fury project [Re: mopar rookie] #361186 02/06/10 11:59 PM 02/06/10 11:59 PM
Joined: Dec 2005 Posts: 1,261 Canada L Lugnutz pro stock
Lugnutz pro stock L Joined: Dec 2005 Posts: 1,261 Canada	Well, are we done yet

Re: 64 Plymouth Fury project [Re: Lugnutz] #361187 02/09/10 05:34 PM 02/09/10 05:34 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Lugnutz your killing me! I would like to be done but we have white death here right now. I run a grocery store ya know so it's been a nightmare for me at work. I can't even blame you this time cause it's been coming from the south. Keep your Noreaster's and Alberta clippers to yourself!

Re: 64 Plymouth Fury project [Re: mopar rookie] #361188 03/16/10 07:40 PM 03/16/10 07:40 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got a little more work done. The trunk is basically buttoned up. Had to cut the hole for the spare tire holder and jack. The mat is the molded type but it needs some heat to flatten out from being rolled up in the box. Also got the weather strip glued on. 5869552-leahsbed016.jpg (141 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361189 03/16/10 07:45 PM 03/16/10 07:45 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Also got the quarter trim and trunk trim put on. Had to modify clips for that trunk trim cause the needed to be bowed in the middle to make it fit right. 5869565-leahsbed020.jpg (198 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361190 03/16/10 07:56 PM 03/16/10 07:56 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Had to buy 3 cans of paint to detail this little trunk trim. Probably sit on the shelf and go bad before I ever need it again 5869594-leahsbed017.jpg (128 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361191 03/16/10 08:00 PM 03/16/10 08:00 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Rear window and roof rail chrome trim installed as well as dome light covers. 5869607-leahsbed007.jpg (149 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361192 03/16/10 08:05 PM 03/16/10 08:05 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Rear door panels, new chrome arm rest bases and window cranks 5869622-leahsbed008.jpg (191 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361193 03/16/10 08:09 PM 03/16/10 08:09 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Back seat and carpet.....moving towards the front of the car next. 5869629-leahsbed010.jpg (163 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361194 03/16/10 08:18 PM 03/16/10 08:18 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	What could be my favorite part....the hood spear. Going to work on all the under the dash stuff this week. Hope to get that done so I can get the dash back in soon. 5869654-leahsbed014.jpg (199 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361195 03/16/10 08:58 PM 03/16/10 08:58 PM
Joined: Feb 2004 Posts: 34,866 S.E. South Dakota ! bigdad Still Posting A Lot
bigdad Still Posting A Lot Joined: Feb 2004 Posts: 34,866 S.E. South Dakota !	The lips of fools bring them strife, and their mouths invite a beating.Proverbs 18:6

Re: 64 Plymouth Fury project [Re: bigdad] #361196 03/17/10 03:16 PM 03/17/10 03:16 PM
A Anonymous Unregistered
Anonymous Unregistered A	Very nice! Makes my heap look like crap!

Re: 64 Plymouth Fury project #361197 03/26/10 09:43 PM 03/26/10 09:43 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	After repeated tries of masking off the side trim and painting the white down the middle I could not do it to suit myself. (Fisheyes and edges jagged from the tape) So I went to a buddy that does vinyl signs and had him cut them for me. We used matte white and they came out great. Nice strait edges. Should have thought of that a month ago, would have saved me alot of time. 5889582-leahsbed024.jpg (188 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361198 03/26/10 09:47 PM 03/26/10 09:47 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Other side 5889590-leahsbed025.jpg (146 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361199 03/26/10 09:50 PM 03/26/10 09:50 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Now that I got the door trim on I can put the front door panels on. 5889594-leahsbed028.jpg (172 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361200 03/26/10 09:53 PM 03/26/10 09:53 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Getting close to putting the dash back in. 5889598-leahsbed030.jpg (192 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361201 03/26/10 10:59 PM 03/26/10 10:59 PM
Joined: Feb 2009 Posts: 3,817 New State kidmopar master
kidmopar master Joined: Feb 2009 Posts: 3,817 New State	Your '64 Fury project looks INCREDIBLE! My first car in 1973 was my brother's '64 Fury 383 4-speed he purchased new at Melrose Chrysler/Plymouth in Oakland,CA. Your restoration is bringing back very fond memories!

Re: 64 Plymouth Fury project [Re: kidmopar] #361202 03/27/10 02:40 PM 03/27/10 02:40 PM
Joined: Nov 2005 Posts: 48 Strasburg CO. D dartracer member
dartracer member D Joined: Nov 2005 Posts: 48 Strasburg CO.	Killer job, gona look great when done.

Re: 64 Plymouth Fury project [Re: dartracer] #361203 06/03/10 07:47 PM 06/03/10 07:47 PM
Joined: Jan 2010 Posts: 456 Santa Barbara, CA HitIt mopar
HitIt mopar Joined: Jan 2010 Posts: 456 Santa Barbara, CA	Incredible job! Let's see what else you've done!

Re: 64 Plymouth Fury project [Re: HitIt] #361204 08/02/10 12:14 PM 08/02/10 12:14 PM
Joined: Dec 2005 Posts: 1,261 Canada L Lugnutz pro stock
Lugnutz pro stock L Joined: Dec 2005 Posts: 1,261 Canada	Okay, "Rookie" where's the finished product!!!!!!!!!!!!!!

Re: 64 Plymouth Fury project [Re: Lugnutz] #361205 08/08/10 10:15 PM 08/08/10 10:15 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Ok, basically I suck I did force myself to go to the garage and get a few things done this week. It's hard to find the time during the summer months. I actually did this at the dining room table. Put the little vinyl stickers on the front spears. 6130001-pacemakers010.jpg (168 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361206 08/08/10 10:22 PM 08/08/10 10:22 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got these items installed on the firewall. 6130020-pacemakers016.jpg (171 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361207 08/08/10 10:27 PM 08/08/10 10:27 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Clearcoated the master cylinder and got it on. I'm sorry but thats all I got for you. Maybe the Mopar Nats will get me pumped up this week! 6130033-pacemakers017.jpg (163 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361208 08/09/10 04:44 PM 08/09/10 04:44 PM
Joined: Dec 2005 Posts: 1,261 Canada L Lugnutz pro stock
Lugnutz pro stock L Joined: Dec 2005 Posts: 1,261 Canada	Hey I'm willing to take it off your hands as an "unfinished project"!!! Ha-Ha.........still looking damn good. Hope you get her done this summer. I'm anxious to see the finished product.

Re: 64 Plymouth Fury project [Re: mopar rookie] #361209 08/11/10 02:04 AM 08/11/10 02:04 AM
Joined: Jul 2005 Posts: 1,044 minnesota P president61 super stock
president61 super stock P Joined: Jul 2005 Posts: 1,044 minnesota	Quote: Got these items installed on the firewall. car looks great! I thought those blue voltage regulators weren't supposed to be used on a street car

Re: 64 Plymouth Fury project [Re: president61] #361210 10/13/10 09:26 PM 10/13/10 09:26 PM
Joined: Feb 2004 Posts: 34,866 S.E. South Dakota ! bigdad Still Posting A Lot
bigdad Still Posting A Lot Joined: Feb 2004 Posts: 34,866 S.E. South Dakota !	need update

Re: 64 Plymouth Fury project [Re: bigdad] #361211 11/26/10 06:30 PM 11/26/10 06:30 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got a few more things done so here is a few pics. Tranny painted up. Eastwood alumablast. 6322189-pacemakers092.jpg (151 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361212 11/26/10 06:35 PM 11/26/10 06:35 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got the new dipstick with the locking top. It must be the wrong one cause it hits the ear on the tranny to where it wont bolt to the bellhousing. Its a 1965 tranny so does it need a special one or can i grind on that ear? Not sure what that ear is for. 6322197-pacemakers091.jpg (174 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361213 11/26/10 06:45 PM 11/26/10 06:45 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Retaped the under the dash wiring and installed the dash. Installed the gauges and dash pad also. Took me forever to decide on the gauges. The only thing bad about the sun tach is you have to buy a 60.00 msd tach adapter if you run the msd ignition, which I am. 6322215-pacemakers084.jpg (214 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361214 11/26/10 06:48 PM 11/26/10 06:48 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Im running a reverse shift valve body so I switched the buttons around so they would read correct. 6322219-pacemakers083.jpg (184 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361215 11/26/10 06:51 PM 11/26/10 06:51 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	New gas tank installed. 6322224-pacemakers095.jpg (196 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361216 11/26/10 07:00 PM 11/26/10 07:00 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got the windlace on the drivers side installed and the inner sillplate which gave me fits to get in there. The passenger side windlace is giving me problems cause when installed the door wont shut. Gonna have to get someone to help with that. 6322236-pacemakers098.jpg (200 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361217 11/26/10 09:04 PM 11/26/10 09:04 PM
Joined: Nov 2009 Posts: 3,410 Belpre,Ohio C CHAPPER master
CHAPPER master C Joined: Nov 2009 Posts: 3,410 Belpre,Ohio	Quote: Retaped the under the dash wiring and installed the dash. Installed the gauges and dash pad also. Took me forever to decide on the gauges. The only thing bad about the sun tach is you have to buy a 60.00 msd tach adapter if you run the msd ignition, which I am. Just started reading your build post,,looking great,,,FYI,,I just had to buy a tach adapter for my old Sun,,$80.00+. Don't let that wreck your build budget!! Keep up the good work. I'll keep watching. If you like drag racing, support your local track.

Re: 64 Plymouth Fury project [Re: CHAPPER] #361218 11/26/10 10:19 PM 11/26/10 10:19 PM
A Anonymous Unregistered
Anonymous Unregistered A	Quote: Took me forever to decide on the gauges. The only thing bad about the sun tach is you have to buy a 60.00 msd tach adapter if you run the msd ignition, which I am. Funny, I'm getting ready to do the exact same thing! Man, I'm glad you posted that! I'm running an MSD 6AL and wouldn've been ticked to have to spend an extra $60 on an adapter. I almost pulled the trigger on that tach and some Summit gauges pretty close to what you have but they have white faces and I'm not crazy about the "Summit" logo. BTW, what brand are the gauges in the pod?

Re: 64 Plymouth Fury project #361219 11/26/10 11:19 PM 11/26/10 11:19 PM
Joined: Nov 2009 Posts: 3,410 Belpre,Ohio C CHAPPER master
CHAPPER master C Joined: Nov 2009 Posts: 3,410 Belpre,Ohio	Quote: Quote: Took me forever to decide on the gauges. The only thing bad about the sun tach is you have to buy a 60.00 msd tach adapter if you run the msd ignition, which I am. Funny, I'm getting ready to do the exact same thing! Man, I'm glad you posted that! I'm running an MSD 6AL and wouldn've been ticked to have to spend an extra $60 on an adapter. I almost pulled the trigger on that tach and some Summit gauges pretty close to what you have but they have white faces and I'm not crazy about the "Summit" logo. BTW, what brand are the gauges in the pod? I was taking for granted, his was an older unit like mine. I was also under the impression, the NEW nostalgic looking Suns, ARE MSD compatabile(sp)??? Maybe I'm assuming too much! We all know what 'assume' does....anybody know for sure?? I had my older tach and wanted to use it for the 'period correct' look. After I hooked it up and it wouldn't work, I ordered the adapter. When I found out what it cost, I wasn't so sure I needed the look that bad. I had another tach that would have worked just fine as it had in the past. If you like drag racing, support your local track.

Re: 64 Plymouth Fury project [Re: CHAPPER] #361220 11/27/10 01:00 AM 11/27/10 01:00 AM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	That is the new sun tach but it does require the adapter. The other gauges are stewart warner that I got through Summit. 6322815-pacemakers089.jpg (200 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361221 11/27/10 06:36 PM 11/27/10 06:36 PM
Joined: Apr 2005 Posts: 1,322 Michigan C crlush pro stock
crlush pro stock C Joined: Apr 2005 Posts: 1,322 Michigan	Wow that car is turning out awesome! love the exteior/interior color combo.

Re: 64 Plymouth Fury project [Re: crlush] #361222 11/27/10 08:41 PM 11/27/10 08:41 PM
Joined: Feb 2005 Posts: 1,612 Vista, California ChickMaggot top fuel
ChickMaggot top fuel Joined: Feb 2005 Posts: 1,612 Vista, California	That car is gonna be totally badazz. You can lead a gift horse to water, but you can't look in his mouth.

Re: 64 Plymouth Fury project [Re: ChickMaggot] #361223 01/06/11 07:15 PM 01/06/11 07:15 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Well I got back from picking up my exhaust manifolds from Aesthetic Finishers in Piqua Oh. They ceramic cast coated them and they look awesome. 6401516-pacemakers010.jpg (203 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361224 01/06/11 07:16 PM 01/06/11 07:16 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Close up. 6401520-pacemakers011.jpg (135 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361225 01/06/11 08:06 PM 01/06/11 08:06 PM
Joined: Feb 2004 Posts: 34,866 S.E. South Dakota ! bigdad Still Posting A Lot
bigdad Still Posting A Lot Joined: Feb 2004 Posts: 34,866 S.E. South Dakota !	She is a beauty, nice work The lips of fools bring them strife, and their mouths invite a beating.Proverbs 18:6

Re: 64 Plymouth Fury project [Re: bigdad] #361226 01/18/11 09:00 PM 01/18/11 09:00 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Windshield and trim installed. 6425944-pacemakers014.jpg (172 downloads) Last edited by mopar rookie; 01/18/11 09:04 PM.

Re: 64 Plymouth Fury project [Re: mopar rookie] #361227 01/18/11 09:08 PM 01/18/11 09:08 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Got all of the inside chrome trim installed along with the sunvisers and rearview mirror. 6425960-pacemakers015.jpg (183 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361228 01/18/11 09:23 PM 01/18/11 09:23 PM
Joined: Feb 2010 Posts: 2,806 Northern NJ StukaJU87 master
StukaJU87 master Joined: Feb 2010 Posts: 2,806 Northern NJ	I just read through your thread. This car is coming out fantastic. Scott 1969 Super Bee, 383/4 speed

Re: 64 Plymouth Fury project [Re: mopar rookie] #361229 01/18/11 10:12 PM 01/18/11 10:12 PM
Joined: Jan 2008 Posts: 894 Connecticut, USA sixty7gtx super stock
sixty7gtx super stock Joined: Jan 2008 Posts: 894 Connecticut, USA	Quote: Before the car went to the body shop I steam cleaned the underneath of the car. NICE Car:) 1967 Plymouth GTX, 1968 HEMI, 4 Spd. Super Bee, 2010 Chrysler 300 Touring, MOPAR = Machines Of Performance And Racing!!

Re: 64 Plymouth Fury project [Re: sixty7gtx] #361230 01/18/11 11:41 PM 01/18/11 11:41 PM
Joined: Jan 2010 Posts: 1,992 midwest 6 68427vette top fuel
68427vette top fuel 6 Joined: Jan 2010 Posts: 1,992 midwest	where in columbus are you? i'm in grove city.

Re: 64 Plymouth Fury project [Re: 68427vette] #361231 01/19/11 02:32 PM 01/19/11 02:32 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Hey Jeff, I'm actually north of Columbus between Mt. Vernon and Sunbury. Thanks guys for all the nice comments. I really need to start thinking about my motor next and who I'm going to have build it. Talked to a couple of different builders up in northern Ohio. Both seemed to be straitup honest guys. I just have to make up my mind who to go with

Re: 64 Plymouth Fury project [Re: mopar rookie] #361232 01/19/11 03:10 PM 01/19/11 03:10 PM
Joined: Dec 2005 Posts: 4,230 State of retirement 5 52savoy master
52savoy master 5 Joined: Dec 2005 Posts: 4,230 State of retirement	Hurry up...You can help me with my '64 Savoy and I'm just down the road from you.. Marysville. Why are you looking outside of central Ohio for an engine builder? There are number of good local machine shops. fred

Re: 64 Plymouth Fury project [Re: 52savoy] #361233 01/19/11 07:20 PM 01/19/11 07:20 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Hey Fred i would be glad to help you on your 64. I know there are some good local machine shops but I just want a mopar guy to do my motor. I have talked with Jeff at Precision and Nick at Compuflow. I just need to pull the trigger so I can maybe make the Nats this year.

Re: 64 Plymouth Fury project [Re: mopar rookie] #361234 01/19/11 08:17 PM 01/19/11 08:17 PM
Joined: Dec 2005 Posts: 4,230 State of retirement 5 52savoy master
52savoy master 5 Joined: Dec 2005 Posts: 4,230 State of retirement	Tell me about your motor...426 or 440 max wedge? specs... Are you going to assemble it yourself? Col-Weld in Columbus does very good work and so does FOWLER's but they(Fowlers) charge out the waaazoo. Performance Research has mopar experience also. Wasserbeck is just north of Deleware but he takes his time. http://www.wasserbeck.com/ http://www.fowlerengines.com/ http://www.priracingengines.com/ http://www.enginerebuilderssupply.com/aboutus.html Last edited by 52savoy; 01/19/11 08:36 PM.

Re: 64 Plymouth Fury project [Re: 52savoy] #361235 06/03/11 10:21 PM 06/03/11 10:21 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Well I doubt that I will make the Nats this year but I did push the car outside today. It had been sitting in the same spot for a year. Needed to do some spring cleaning. I still dont know about the motor yet but leaning towards a 500 inch stroker. I will have someone else build it cause I just dont have the knowledge. 6665723-pacemakers033.jpg (212 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361236 06/03/11 10:25 PM 06/03/11 10:25 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Did fab up some mounts for my tranny cooler. Its nice to have a brother inlaw that owns a machine shop. Thanks Tracy 6665730-pacemakers034.jpg (164 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361237 06/03/11 10:29 PM 06/03/11 10:29 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Welded the little spacers on and had them powder coated. 6665736-pacemakers036.jpg (153 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361238 06/03/11 10:38 PM 06/03/11 10:38 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	The tranny cooler is from Setrab. They are located here in my hometown and are good friends. Most all cars in Nascar run thier coolers. Here it is mounted on car. 6665756-pacemakers038.jpg (179 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361239 06/03/11 10:46 PM 06/03/11 10:46 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Now I am fabbing up an aluminum glove box. I am going to mount the 6al on the bottom side of it. 6665772-pacemakers040.jpg (182 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361240 06/03/11 10:50 PM 06/03/11 10:50 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Just about ready to take it out and weld it together. 6665782-pacemakers041.jpg (203 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361241 06/06/11 07:13 PM 06/06/11 07:13 PM
Joined: Dec 2005 Posts: 1,261 Canada L Lugnutz pro stock
Lugnutz pro stock L Joined: Dec 2005 Posts: 1,261 Canada

Re: 64 Plymouth Fury project [Re: Lugnutz] #361242 10/16/11 02:53 PM 10/16/11 02:53 PM
Joined: Jan 2004 Posts: 1,468 N.Y. sixpacksteve pro stock
sixpacksteve pro stock Joined: Jan 2004 Posts: 1,468 N.Y.	Hell Hath No Fury Like Mine

Re: 64 Plymouth Fury project [Re: sixpacksteve] #361243 10/21/11 12:29 PM 10/21/11 12:29 PM
Joined: Aug 2008 Posts: 14 Missouri, Cole county gbolten480 member
gbolten480 member Joined: Aug 2008 Posts: 14 Missouri, Cole county

Re: 64 Plymouth Fury project [Re: gbolten480] #361244 10/22/11 06:11 PM 10/22/11 06:11 PM
Joined: Jan 2003 Posts: 3,103 Phila Pa S scatpacktom master
scatpacktom master S Joined: Jan 2003 Posts: 3,103 Phila Pa

Re: 64 Plymouth Fury project [Re: scatpacktom] #361245 10/23/11 09:58 PM 10/23/11 09:58 PM
Joined: Sep 2006 Posts: 1,218 So Dak GOLDENCOMMANDO pro stock
GOLDENCOMMANDO pro stock Joined: Sep 2006 Posts: 1,218 So Dak

Re: 64 Plymouth Fury project [Re: GOLDENCOMMANDO] #361246 10/30/11 11:01 PM 10/30/11 11:01 PM
Joined: Dec 2005 Posts: 1,261 Canada L Lugnutz pro stock
Lugnutz pro stock L Joined: Dec 2005 Posts: 1,261 Canada

Re: 64 Plymouth Fury project [Re: Lugnutz] #361247 10/30/11 11:57 PM 10/30/11 11:57 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	What a nice 64 you are building. Ron

Re: 64 Plymouth Fury project [Re: 383man] #361248 12/23/11 03:29 PM 12/23/11 03:29 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Ok. got a few updates for you. Got my glove box back today from getting it powder coated. 6980965-pacemakers101.jpg (156 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361249 12/23/11 03:31 PM 12/23/11 03:31 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	MSD installed on the bottom side 6980966-pacemakers107.jpg (153 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361250 12/23/11 03:40 PM 12/23/11 03:40 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Installed in the car. Now I have a functional glove box and the MSD is hidden. 6980977-pacemakers110.jpg (157 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361251 12/23/11 03:44 PM 12/23/11 03:44 PM
Joined: Feb 2008 Posts: 309 central ohio M mopar rookie OP enthusiast
mopar rookie OP enthusiast M Joined: Feb 2008 Posts: 309 central ohio	Underneath view. got to get the wires ran out to the engine compartment and I can button up the insde. 6980984-pacemakers106.jpg (192 downloads)

Re: 64 Plymouth Fury project [Re: mopar rookie] #361252 12/23/11 08:12 PM 12/23/11 08:12 PM
Joined: Jan 2010 Posts: 1,992 midwest 6 68427vette top fuel
68427vette top fuel 6 Joined: Jan 2010 Posts: 1,992 midwest	i use Col-Weld in Columbus ,, CHET,, is the man! i'm in columbus,, about 15 min from them,,, jc - grove city

Re: 64 Plymouth Fury project [Re: 68427vette] #361253 02/21/12 09:22 PM 02/21/12 09:22 PM
Joined: Dec 2004 Posts: 245 Missouri Dragger40 enthusiast
Dragger40 enthusiast Joined: Dec 2004 Posts: 245 Missouri	??? Is it fast? It has a lightning bolt dont it?

Re: 64 Plymouth Fury project [Re: Dragger40] #361254 07/25/13 09:06 PM 07/25/13 09:06 PM
Joined: Oct 2008 Posts: 506 Utah, USA 1 1964superstock mopar
1964superstock mopar 1 Joined: Oct 2008 Posts: 506 Utah, USA	Quote: ??? Anything new? Love your car and your work.

Re: 64 Plymouth Fury project [Re: 1964superstock] #361255 07/26/13 03:07 AM 07/26/13 03:07 AM
Joined: Feb 2004 Posts: 34,866 S.E. South Dakota ! bigdad Still Posting A Lot
bigdad Still Posting A Lot Joined: Feb 2004 Posts: 34,866 S.E. South Dakota !	Another BUMP ! Where art thou updates ??

Re: 64 Plymouth Fury project [Re: bigdad] #361256 12/19/13 12:06 AM 12/19/13 12:06 AM
Joined: Sep 2006 Posts: 1,218 So Dak GOLDENCOMMANDO pro stock
GOLDENCOMMANDO pro stock Joined: Sep 2006 Posts: 1,218 So Dak

Re: 64 Plymouth Fury project [Re: GOLDENCOMMANDO] #361257 12/20/13 07:56 PM 12/20/13 07:56 PM
Joined: Nov 2009 Posts: 3,410 Belpre,Ohio C CHAPPER master
CHAPPER master C Joined: Nov 2009 Posts: 3,410 Belpre,Ohio	If you like drag racing, support your local track.

Re: 64 Plymouth Fury project [Re: CHAPPER] #361258 02/13/15 09:30 PM 02/13/15 09:30 PM
Joined: Jan 2004 Posts: 1,468 N.Y. sixpacksteve pro stock
sixpacksteve pro stock Joined: Jan 2004 Posts: 1,468 N.Y.	Hell Hath No Fury Like Mine

Page 1 of 8

1

2

3

4

5

6

7

8

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1