Torque converter squeaking
#283969
04/10/09 06:44 PM
04/10/09 06:44 PM
|
Joined: Oct 2003
Posts: 3,698 NE Oklahoma
Von
OP
master
|
OP
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
Finally traced my mysterious squeak. I jacked the car up, put in gear and had my wife sit in the car with her foot on the brake. As soon as you put the car in a forward gear a rather large squeak comes from the torque converter. Doesnt do it in N and doesnt seem as loud in R.
Any ideas?
Gonna pull it in and pull the tranny back.
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
Re: Torque converter squeaking
[Re: dusturbd340W5]
#283974
04/10/09 10:25 PM
04/10/09 10:25 PM
|
Joined: Oct 2003
Posts: 3,698 NE Oklahoma
Von
OP
master
|
OP
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
Pulled it all apart and everything checks out OK. Checked crank end play and it is OK also.
Anyway to determine it might be the converter without sending it off?
Any other ideas?
Thanks
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
Re: Torque converter squeaking
[Re: Von]
#283975
04/11/09 12:05 AM
04/11/09 12:05 AM
|
Joined: Jan 2003
Posts: 17,918 Akron, Ohio
ProSport
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
|
All you can do is stick your finger in the converter and see if everything turns free'ly and look for broken pieces or metal shavings. Best bet is to send it out while it's out of the car and it's early in the season.
1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
|
|
|
Re: Torque converter squeaking
[Re: Quicktree]
#283978
04/11/09 07:52 AM
04/11/09 07:52 AM
|
Joined: Feb 2003
Posts: 12,675 Columbia, CT
moper
I Live Here
|
I Live Here
Joined: Feb 2003
Posts: 12,675
Columbia, CT
|
I had a whine... sounded something like a supercharger as I recall. THe bearing in the convertor had come apart. Only way to tell (fluid was clean, no metal or damage visible) was the noise, and the brake stall was not consistent. Bottom line, it if's noisey, and it wasn't, and evrything else is fine, then it's the convertor.
Well, art is art, isn't it? Still, on the other hand, water is water! And east is east and west is west and if you take cranberries and stew them like applesauce they taste much more like prunes than rhubarb does. Now, uh... Now you tell me what you know.
|
|
|
Re: Torque converter squeaking
[Re: Chris2581]
#283980
04/11/09 11:26 AM
04/11/09 11:26 AM
|
Joined: Oct 2003
Posts: 3,698 NE Oklahoma
Von
OP
master
|
OP
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
Found the problem or lack thereof after 8 hours of wrenching. Turns out it was the slip tube on my passenger header vibrating....
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
Re: Torque converter squeaking
[Re: Von]
#283981
04/11/09 12:37 PM
04/11/09 12:37 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Found the problem or lack thereof after 8 hours of wrenching. Turns out it was the slip tube on my passenger header vibrating....
You sure... could be the rocker you found without oil
|
|
|
Re: Torque converter squeaking
[Re: MR_P_BODY]
#283982
04/11/09 08:49 PM
04/11/09 08:49 PM
|
Joined: Oct 2003
Posts: 3,698 NE Oklahoma
Von
OP
master
|
OP
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
Quote:
Quote:
Found the problem or lack thereof after 8 hours of wrenching. Turns out it was the slip tube on my passenger header vibrating....
You sure... could be the rocker you found without oil
Positive. The rocker arm is a new problem since I pulled the whole shaft and rockers off on Thurs and they were fine then.
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
|
|