Previous Thread
Next Thread
Print Thread
Page 1 of 4 1 2 3 4
What Do YOU Want Howards Cams To Make For Mopars? #267858
03/27/09 12:37 AM
03/27/09 12:37 AM
Joined: Jun 2006
Posts: 85
Wellington, Ohio (20 minutes f...
MrMoparRacing Offline OP
member
MrMoparRacing  Offline OP
member

Joined: Jun 2006
Posts: 85
Wellington, Ohio (20 minutes f...
Howards Cams currently makes these items for
Small Block Mopar:
Hydraulic Flat Tappet Camshafts
Mechanical Flat Tappet Camshafts
Steel Billet Mechanical Roller Camshafts
Billet Timing Sets
Cam Correct
Hydraulic Lifters
Mechanical Lifters
“THE ORIGINAL” Direct Lube Solid Lifters
Mechanical Racing Roller Lifters (Vertical Bar)
Race Valve Springs, Retainers, Locks, Seals, Caps
Distributor Gears
Ultimate Duty Billet Connecting Rods


Big Block Mopar:
Hydraulic Flat Tappet Camshafts
Mechanical Flat Tappet Camshafts (3 Bolt)
Steel Billet Mechanical Roller Camshafts (3 Bolt)
Billet Timing Sets (singe & three bolt)
Cam Correct
Hydraulic Lifters
Mechanical Lifters
“THE ORIGINAL” Direct Lube Solid Lifters
Mechanical Racing Roller Lifters (Vertical Bar)
Race Valve Springs, Retainers, Locks, Seals, Caps
Distributor Gears

Howards Cams is wanting to know what MOPAR customers want Howards Cams to make that they currently do not offer. Rocker arms, crankshafts, connecting rods, pushrods, stroker pistons ect. Please be specific to exact sizes, such as rod length, stroke, piston bore, ect. Your input is highly valued!

Howards Cams products are MADE IN THE USA!

Howards Cams products are now available at Summit Racing Equipment!

Last edited by MrMoparRacing; 03/27/09 02:29 AM.
Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing] #267859
03/27/09 12:40 AM
03/27/09 12:40 AM
Joined: Feb 2004
Posts: 4,501
Gainesville,FL
G
goldmember Offline
master
goldmember  Offline
master
G

Joined: Feb 2004
Posts: 4,501
Gainesville,FL
I like the cool box for storing cams.

Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: goldmember] #267860
03/27/09 01:04 AM
03/27/09 01:04 AM
Joined: Nov 2004
Posts: 2,825
Sk. Canada
RemCharger Offline
master
RemCharger  Offline
master

Joined: Nov 2004
Posts: 2,825
Sk. Canada
An "affordable" rocker setup for the max wedge victors. I bet they would sell like hotcakes. Well, as hotcakey as mopar can get anyways lol.

Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing] #267861
03/27/09 01:22 AM
03/27/09 01:22 AM
Joined: Jun 2003
Posts: 181
Suburb of Chicago, IL
B
BCFKody Offline
member
BCFKody  Offline
member
B

Joined: Jun 2003
Posts: 181
Suburb of Chicago, IL
Hot Hydraulic roller cams and hydraulic roller lifters for big blocks and small blocks with stock displacements, and especially for hot street/strip stroker motors.

Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing] #267862
03/27/09 01:50 AM
03/27/09 01:50 AM
Joined: Jan 2003
Posts: 6,531
Jacksonville, FL
Chris2581 Offline
master
Chris2581  Offline
master

Joined: Jan 2003
Posts: 6,531
Jacksonville, FL
An affordable quality H-beam rod and 440 6pak style flat top pistons for 440 Mopar.The rods should be stock size(.990 pin OK)6.76 length,3.75 stroke,pistons in +.020,.030.040 and .060 oversizes from 4.320 standard bore.


Nautilus Racing-
We use Superformance gaskets and Turbo Action converters/products.
Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: Chris2581] #267863
03/27/09 02:04 AM
03/27/09 02:04 AM
Joined: Nov 2004
Posts: 2,825
Sk. Canada
RemCharger Offline
master
RemCharger  Offline
master

Joined: Nov 2004
Posts: 2,825
Sk. Canada
Quote:

An affordable quality H-beam rod and 440 6pak style flat top pistons for 440 Mopar.The rods should be stock size(.990 pin OK)6.76 length,3.75 stroke,pistons in +.020,.030.040 and .060 oversizes from 4.320 standard bore.


Same with a 383. Lots of guys still building those. Just look in the Q&A every now and then.

Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: RemCharger] #267864
03/27/09 02:10 AM
03/27/09 02:10 AM
Joined: Jan 2003
Posts: 6,531
Jacksonville, FL
Chris2581 Offline
master
Chris2581  Offline
master

Joined: Jan 2003
Posts: 6,531
Jacksonville, FL
Yes to the 383 parts also!! I should have mentioned those in my original post.


Nautilus Racing-
We use Superformance gaskets and Turbo Action converters/products.
Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: Chris2581] #267865
03/27/09 04:14 AM
03/27/09 04:14 AM
Joined: Jul 2004
Posts: 4,384
Worst Weather USA
493_DART Offline
master
493_DART  Offline
master

Joined: Jul 2004
Posts: 4,384
Worst Weather USA
affordable ($3-400) rockers / alum and SS , in 1.6 AND 1.7 ratio .

Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: BCFKody] #267866
03/27/09 07:22 AM
03/27/09 07:22 AM
Joined: Nov 2006
Posts: 1,086
Baton Rouge, La.
StandOnIt Offline
super stock
StandOnIt  Offline
super stock

Joined: Nov 2006
Posts: 1,086
Baton Rouge, La.
Quote:

Hot Hydraulic roller cams and hydraulic roller lifters for big blocks and small blocks with stock displacements, and especially for hot street/strip stroker motors.




A good hyd roller for s/b strokers.


76' Volare, 5.9 magnum w/Iron heads. New best 10.68 at 123 mph 1/4 mile.
Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing] #267867
03/27/09 07:31 AM
03/27/09 07:31 AM
Joined: Jul 2006
Posts: 4,595
On the south side of Nowhere
S
S/ST 3040 Offline
master
S/ST 3040  Offline
master
S

Joined: Jul 2006
Posts: 4,595
On the south side of Nowhere
Add Mopar SB to their Pro-Max line of direct lube roller
lifters......and keep the prices sane.

Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: S/ST 3040] #267868
03/27/09 08:03 AM
03/27/09 08:03 AM
Joined: Nov 2005
Posts: 210
mass,usa
sickhemi Offline
enthusiast
sickhemi  Offline
enthusiast

Joined: Nov 2005
Posts: 210
mass,usa
W2 rockers affordable

Last edited by sickhemi; 03/27/09 08:04 AM.

1968 gts 355 r3 six speed efi with irs in progress and 1969 convt 440 stage 6 efi 5spd dana
Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: sickhemi] #267869
03/27/09 08:41 AM
03/27/09 08:41 AM
Joined: Mar 2003
Posts: 15,478
the boonies
aarcuda Offline
I Live Here
aarcuda  Offline
I Live Here

Joined: Mar 2003
Posts: 15,478
the boonies
TA rockers affordable. i really really want a set of the harland sharps but I cant afford to spend $1000 buck on the set.

Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: sickhemi] #267870
03/27/09 08:45 AM
03/27/09 08:45 AM
Joined: Jan 2003
Posts: 16,122
Grand Haven, MI
patrick Online content
I Live Here
patrick  Online Content
I Live Here

Joined: Jan 2003
Posts: 16,122
Grand Haven, MI
I'd love a 4" strock SBM USA forged/USA machined crank in the same price range as their USA forged/USA machined SBC cranks, maybe a cast crank option in the $400 range if it was cast/machined in the USA.

I'd really, really love them to make their powderforged rods in SBM size, or at least 6.125" SBC, with the little end designed such that they could have a SBM pin size option without having to do a lot of spendy rework. those powderforged rods look like they'd be awesome for a street build up, or any application where you're looking at under 600HP or so.


1976 Spinnaker White Plymouth Duster, /6 A833OD
1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!***
2011 Toxic Orange Dodge Charger R/T
2017 Grand Cherokee Overland
2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)
Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: patrick] #267871
03/27/09 09:25 AM
03/27/09 09:25 AM
Joined: Nov 2005
Posts: 1,943
San Angelo, Texas, U.S.A.
1968RR Offline
top fuel
1968RR  Offline
top fuel

Joined: Nov 2005
Posts: 1,943
San Angelo, Texas, U.S.A.
I just installed my new Howard's cam earlier this week (haven't fired yet).
Y'all have great customer service and great products. Keep up the good work.


"When I'm in a slump, I comfort myself by saying if I believe in dinosaurs, then somewhere, they must be believing in me. And if they believe in me, then I can believe in me." - Mookie Wilson
Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: 1968RR] #267872
03/27/09 10:51 AM
03/27/09 10:51 AM
Joined: Feb 2003
Posts: 1,572
wisconSIN
B
Blown61 Offline
pro stock
Blown61  Offline
pro stock
B

Joined: Feb 2003
Posts: 1,572
wisconSIN
They move from Oshkosh?

Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: 1968RR] #267873
03/27/09 11:24 AM
03/27/09 11:24 AM
Joined: Feb 2007
Posts: 5,080
organ
M
maximum entropy Offline
master
maximum entropy  Offline
master
M

Joined: Feb 2007
Posts: 5,080
organ
rocker arms! offset for indy, victor, et cetera.


for what is the good life if not doing things thoughtfully?
Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing] #267874
03/27/09 12:42 PM
03/27/09 12:42 PM
Joined: Jan 2003
Posts: 19
Sweden
S
sbdemon Offline
member
sbdemon  Offline
member
S

Joined: Jan 2003
Posts: 19
Sweden
W2/W5 rockers 1.6 1.7 ratio.

sbdemon

Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing] #267875
03/27/09 06:08 PM
03/27/09 06:08 PM
Joined: Nov 2004
Posts: 3,619
Norwich CT USA
Defbob Offline
master
Defbob  Offline
master

Joined: Nov 2004
Posts: 3,619
Norwich CT USA
Big Block

Forged Cranks: 4.25", 4.375, 4.5", 4.75" strokes, 2.2" x 2.009" wide rod journal on all, 2.75" mains, 8 bolt

Forged Crank: 3.375" stroke, 2.375" X 2.050 wide rod journal, 2.75" mains, 8 bolt

Billet Rods: 6.76" long, 2.375 journal, 1.014" width, .990 pin

Billet rods: 6.86" long, 2.375 journal, 1.014" width, .990 pin


Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing] #267876
03/27/09 06:30 PM
03/27/09 06:30 PM
Joined: Jan 2003
Posts: 15,439
Val-haul-ass... eventually
B
BradH Offline
Taking time off to work on my car
BradH  Offline
Taking time off to work on my car
B

Joined: Jan 2003
Posts: 15,439
Val-haul-ass... eventually
If you offer a composite (not bronze) billet-cam compatible distributor drive gear for other brands (like Comp and Crane do), how about tooling one up for the Mopar crowd? Having to run a bronze gear on a street car is one of the things that's turned me off from switching to a solid roller in my 440.

Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: sbdemon] #267877
03/27/09 07:08 PM
03/27/09 07:08 PM
Joined: Jan 2007
Posts: 3,695
nc
E
emarine01 Offline
master
emarine01  Offline
master
E

Joined: Jan 2007
Posts: 3,695
nc
Quote:

W2/W5 rockers 1.6 1.7 ratio.

sbdemon



Page 1 of 4 1 2 3 4






Powered by UBB.threads™ PHP Forum Software 7.7.1