|
Re: Build me a 1000HP 400ci NA engine...........
[Re: gregsdart]
#2622680
02/17/19 08:32 PM
02/17/19 08:32 PM
|
Joined: Aug 2005
Posts: 4,101 Yes
sixpakdodge
master
|
master
Joined: Aug 2005
Posts: 4,101
Yes
|
rick watters has a set of the newer aussie heads and they are sprinklers as well,,,, there is no metal in the bowl area
i was going to have them cast here in the us with no labels or markings, then make plastic pieces which receive in where the labels and markings need to be
it would prob be 5k for a set of castings,, not enough demand,, so started thinking of a small inch 99 hemi
what matters is the timeslip,, not the dyno number,, guys say you loose 2 tenths and some mph going to a 10.5 tire,, i dont believe that if you can still go 1.17 or so 60 ft please empty your pm box Umm... https://www.legacy.com/obituaries/name/jeffrey-kobylski-obituary?pid=179074522
|
|
|
Re: Build me a 1000HP 400ci NA engine...........
[Re: sixpakdodge]
#2622697
02/17/19 09:37 PM
02/17/19 09:37 PM
|
Joined: Jan 2003
Posts: 4,394 The Pale Blue Dot
Skeptic
master
|
master
Joined: Jan 2003
Posts: 4,394
The Pale Blue Dot
|
rick watters has a set of the newer aussie heads and they are sprinklers as well,,,, there is no metal in the bowl area
i was going to have them cast here in the us with no labels or markings, then make plastic pieces which receive in where the labels and markings need to be
it would prob be 5k for a set of castings,, not enough demand,, so started thinking of a small inch 99 hemi
what matters is the timeslip,, not the dyno number,, guys say you loose 2 tenths and some mph going to a 10.5 tire,, i dont believe that if you can still go 1.17 or so 60 ft please empty your pm box Umm... https://www.legacy.com/obituaries/name/jeffrey-kobylski-obituary?pid=179074522 To be fair Modern Cylinder Heads is still in business.
|
|
|
|
|
|