How to remove valve seats - Moparts Forums

Register Log In Moparts Forums Gen III Hemi Tech How to remove valve seats

Print Thread

How to remove valve seats #2612062 01/25/19 02:30 PM 01/25/19 02:30 PM
Joined: Jun 2008 Posts: 577 Arkansas A Adrielp OP mopar
Adrielp OP mopar A Joined: Jun 2008 Posts: 577 Arkansas	Any tips for removing valve seats out of 6.4l BGE heads at home? Adriel Paradise Substation Design Engineer III

Re: How to remove valve seats [Re: Adrielp] #2612492 01/26/19 11:56 AM 01/26/19 11:56 AM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	IIRC 200 degrees in an oven and they fall out.

Re: How to remove valve seats [Re: Adrielp] #2612702 01/26/19 06:36 PM 01/26/19 06:36 PM
Joined: Jan 2005 Posts: 12,419 Kalispell Mt. H HotRodDave I Live Here
HotRodDave I Live Here H Joined: Jan 2005 Posts: 12,419 Kalispell Mt.	hopefully they don't fall out of the head simply heating it to 200 degrees since the engine temp is 205-210 and the ex valve seat is probably much higher than that running down the road under load. I am not causing global warming, I am just trying to hold off a impending Ice Age!

Re: How to remove valve seats [Re: Adrielp] #2613897 01/29/19 08:11 AM 01/29/19 08:11 AM
Joined: Jan 2010 Posts: 139 Canada M Max Weg member
Max Weg member M Joined: Jan 2010 Posts: 139 Canada	Just run a tig weld bead on the seat and it will shrink it. Sometimes I weld a piece of flat bar across to pry the seat out. Max Weg

Re: How to remove valve seats [Re: HotRodDave] #2622610 02/17/19 05:39 PM 02/17/19 05:39 PM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Originally Posted By HotRodDave hopefully they don't fall out of the head simply heating it to 200 degrees since the engine temp is 205-210 and the ex valve seat is probably much higher than that running down the road under load. Sorry Dave i meant 200 celcius.

Re: How to remove valve seats [Re: Max Weg] #2622699 02/17/19 09:39 PM 02/17/19 09:39 PM
Joined: Jan 2003 Posts: 5,484 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,484 SoCal	Originally Posted By Max Weg Just run a tig weld bead on the seat and it will shrink it. Sometimes I weld a piece of flat bar across to pry the seat out. Max Weg Yep, mig or tig a bead around until it falls out. Brian Hafliger

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1