Green bearing O ring seal - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Green bearing O ring seal

Print Thread

Green bearing O ring seal #2564292 10/15/18 10:36 AM 10/15/18 10:36 AM
Joined: Jun 2003 Posts: 2,410 Weatherford, Texas RapidusMaximus OP top fuel
RapidusMaximus OP top fuel Joined: Jun 2003 Posts: 2,410 Weatherford, Texas	I know this may be a reach but does any one happen to know the part number of the O ring that fits on the 8 3/4 green bearings? I had a set of axles sitting on the shelf for years and discovered one of the bearings missing its O ring yesterday just as I was about to slide it in the housing... Last edited by RapidusMaximus; 10/15/18 10:37 AM. 1968 Plymouth GTX 1974 Dodge P/U Long Bed Stepside 318 2019 Ram 2500 6.4, auto, 4WD

Re: Green bearing O ring seal [Re: RapidusMaximus] #2564386 10/15/18 01:43 PM 10/15/18 01:43 PM
Joined: Mar 2007 Posts: 3,277 West Coast, USA jbc426 master
jbc426 master Joined: Mar 2007 Posts: 3,277 West Coast, USA	Call and ask Dr Diff. 1970 Plymouth 'Cuda #'s 440-6(block in storage)currently 493" 6 pack, Shaker, 5 speed Passon, 4.10's 1968 Plymouth Barracuda Convertible 408 Magnum EFI with 4 speed automatic overdrive, 3800 stall lock-up converter and 4.30's (closest thing to an automatic 5 speed going)

Re: Green bearing O ring seal [Re: jbc426] #2564389 10/15/18 01:48 PM 10/15/18 01:48 PM
Joined: Jun 2003 Posts: 2,410 Weatherford, Texas RapidusMaximus OP top fuel
RapidusMaximus OP top fuel Joined: Jun 2003 Posts: 2,410 Weatherford, Texas	Yep...thats probably what I'm about to do, I know he's a busy guy was trying to keep from bugging him but looks like I'm going to have to... 1968 Plymouth GTX 1974 Dodge P/U Long Bed Stepside 318 2019 Ram 2500 6.4, auto, 4WD

Re: Green bearing O ring seal [Re: RapidusMaximus] #2564801 10/16/18 01:03 PM 10/16/18 01:03 PM
Joined: Sep 2003 Posts: 19,336 north of coder moparx "Butt Crack Bob"
moparx "Butt Crack Bob" Joined: Sep 2003 Posts: 19,336 north of coder	please report back what you find out.

Re: Green bearing O ring seal [Re: moparx] #2564821 10/16/18 01:52 PM 10/16/18 01:52 PM
Joined: Jun 2003 Posts: 2,410 Weatherford, Texas RapidusMaximus OP top fuel
RapidusMaximus OP top fuel Joined: Jun 2003 Posts: 2,410 Weatherford, Texas	Will do, I have a call in to Dr. Diff... 1968 Plymouth GTX 1974 Dodge P/U Long Bed Stepside 318 2019 Ram 2500 6.4, auto, 4WD

Re: Green bearing O ring seal [Re: RapidusMaximus] #2564885 10/16/18 03:31 PM 10/16/18 03:31 PM
Joined: Jun 2003 Posts: 2,410 Weatherford, Texas RapidusMaximus OP top fuel
RapidusMaximus OP top fuel Joined: Jun 2003 Posts: 2,410 Weatherford, Texas	And the verdict is...take the axle to the parts store and find one that fits the groove and OD of the bearing but doesn't stick up too far (too thick). The bearings of course come with the O ring installed so anytime he has an issue he matches one up from the parts store. Kudos to Cass for taking time out to help me out Last edited by RapidusMaximus; 10/16/18 03:32 PM. 1968 Plymouth GTX 1974 Dodge P/U Long Bed Stepside 318 2019 Ram 2500 6.4, auto, 4WD

Re: Green bearing O ring seal [Re: RapidusMaximus] #2565310 10/17/18 12:25 PM 10/17/18 12:25 PM
Joined: Sep 2003 Posts: 19,336 north of coder moparx "Butt Crack Bob"
moparx "Butt Crack Bob" Joined: Sep 2003 Posts: 19,336 north of coder	o-rings are sized according to od, id, and thickness. there has to be some information on the correct size, other than "take it to the parts store and match something up that doesn't stick up too far".

Re: Green bearing O ring seal [Re: moparx] #2565328 10/17/18 01:07 PM 10/17/18 01:07 PM
Joined: Jun 2003 Posts: 2,410 Weatherford, Texas RapidusMaximus OP top fuel
RapidusMaximus OP top fuel Joined: Jun 2003 Posts: 2,410 Weatherford, Texas	My assumption is the only way to get the pn would be to call the bearing manufacturer and see if it would be possible to convince the right person to pull a blueprint and then give up the pn of the O ring...having worked at big companies most of my life I think that might be a really frustrating phone call Last edited by RapidusMaximus; 10/17/18 01:08 PM. 1968 Plymouth GTX 1974 Dodge P/U Long Bed Stepside 318 2019 Ram 2500 6.4, auto, 4WD

Re: Green bearing O ring seal [Re: RapidusMaximus] #2565469 10/17/18 05:36 PM 10/17/18 05:36 PM
Joined: Jan 2003 Posts: 25,743 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,743 Rio Linda, CA	If the O ring is missing, you can measure the width of the groove; that, along with the ID of the housing bore (2.875") gives you a place to start. The INTERNET, the MISinformation superhighway

Re: Green bearing O ring seal [Re: RapidusMaximus] #2566932 10/20/18 02:55 PM 10/20/18 02:55 PM
Joined: Jul 2007 Posts: 199 TN Hoosier J jb500 member
jb500 member J Joined: Jul 2007 Posts: 199 TN Hoosier	It may be a -147 (.103) or -231 (.139) o-ring depending on the thickness of the seal. Mic the seal you have and verify the cross section. Go to a Parker store or similar Hyd shop with the seal or axle and have them match up/verify the size you need. Should be no more than $.50 depending on store mins. The Parker O-ring catalog online has a bunch of info you can go over if needed. Catalog # ORD 5700.

Re: Green bearing O ring seal [Re: jb500] #2567402 10/21/18 06:01 PM 10/21/18 06:01 PM
Joined: Jan 2008 Posts: 3,886 Lost and Spaced B bboogieart master
bboogieart master B Joined: Jan 2008 Posts: 3,886 Lost and Spaced	Originally Posted By jb500 Should be no more than $.50 depending on store mins. & would have been done days ago if you would have just gone and got one. I have mechanical Aptitude. I can screw up anything.

Re: Green bearing O ring seal [Re: RapidusMaximus] #2567404 10/21/18 06:16 PM 10/21/18 06:16 PM
Joined: Jan 2003 Posts: 8,016 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,016 Polson, MT	This is not rocket science. Take the bearing to a parts store and trial fit 2-3 O-rings from their assortment until you find one that fits. This takes less than 5 minutes. Contact info

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1