Topic Options
#2557544 - 10/02/18 09:30 AM For Sale - Modern Mopar/ Gen3 Hemi Engine - 4th Quarter
moparts Offline


Registered: 01/19/03
Posts: 14163
Loc: Norwich CT USA
up

Top
#2557824 - 10/02/18 04:04 PM Re: For Sale - Modern Mopar/ Gen3 Hemi Engine - 4th Quarter [Re: moparts]
moparlouie Offline
master

Registered: 01/18/06
Posts: 3834
Loc: ct.
NEW 2009 5.7 Crate Engine, New, Never Fired or installed, complete ready to bolt in. $3500. Trade for 65 Coronet. lafrancebiglou@aol.com


Attachments
102_6113.JPG

102_6112.JPG


_________________________
Have been a member for years!

Top
#2557988 - 10/02/18 08:28 PM Re: For Sale - Modern Mopar/ Gen3 Hemi Engine - 4th Quarter [Re: moparts]
Dragula Offline


Registered: 05/02/04
Posts: 10385
Loc: Taxes R-US, NY
Testing the waters here on these...

Complete, brand new, never used, ready to bolt on Edlebrock heads 61109, purchased bare.

Ported G3 Hemi heads....Bought them bare, and then had them ported and then had valves, and springs put in. Seats are matched to the valves, and flow is +370 at .650"

I have a few bucks into these, but going this route seems like its not meant to be if they can't put a distributor on a 6.4 block....

These are over $2k bare, and I have porting, valves, springs, etc into these....

$3500 + shipping

https://www.summitracing.com/parts/edl-61109

Or looking for a G3 block...What do you have?


Attachments
KIMG0694-1.jpg

KIMG0695-1.jpg

KIMG0697-1.jpg




Edited by Dragula (12/31/18 05:09 PM)
_________________________
'71 Duster Pump Gas 512LD 2013 Mod Gas Winner GRS
https://www.youtube.com/watch?v=Z_XTmRBuvWs (6.19)
https://www.youtube.com/watch?v=gQZGfDBPROM (9.70 at 138.5mph)

'70 Cuda, Plan C....605 Hemi
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.31)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

Top
#2568811 - 10/24/18 10:31 AM Re: For Sale - Modern Mopar/ Gen3 Hemi Engine - 4th Quarter [Re: moparts]
csmopar Offline
member

Registered: 07/30/06
Posts: 181
Loc: usa
I have a 5.7 Hemi, long block engine, no ACC. I bought it a couple years back with the notion of putting it in one of my project cars, but due to moving, I'm clearing out parts and really have no need for it. Mileage unsure, rotates over fine.

pm me for pics.

Asking 900 or make an offer. I can crate and ship but shipping charges would be extra. Crating would be free of charge. Local pick up in Indiana is available as well. Delivery within a reasonable distance might be available as well.


SOLD


Edited by csmopar (11/14/18 10:52 AM)

Top
#2574434 - 11/05/18 12:22 PM Re: For Sale - Modern Mopar/ Gen3 Hemi Engine - 4th Quarter [Re: moparts]
B5 Classic Offline
member

Registered: 02/25/10
Posts: 19
Loc: Northern California
Please see original ad below. I have decided I can part this out by major components ie: Short block; Heads(pair); Intake (sold). All parts are NEW. Please PM me if interested, I can text you some pics too. Thank you


I collected all new parts for building a stock 6.1 over a period of time. My resto-mod project is now receiving a new HellCrate engine and it's time to sell off what I no longer need or want.
I have a new 6.1 block in factory box/pallet; new 6.1 heads, still in their little factory wooden crates; a new 6.1 intake manifold; a new, never run stock "take out" rotating assembly (crank, rods, pistons/rings, bearings); new in Mopar box(es) oil pump; timing chain & gears; cam; lifters; push rods; rocker assemblies; valve covers. Comes with new block hardware kit; new main bolts; new head bolts. Engine NEEDS ASSEMBLY
These are all new, never run parts that I had planned on building into a good running G3 for a 3,200 lb. Cuda project. Will sell for $6,000 plus shipping. If possible, would prefer to sell more locally out here in California or the West coast, but willing to discuss if there is interested elsewhere in this great nation.

Price: $6,000 plus shipping Payment would need to be certified check / cashier's check from Bank of America (cash welcome if local) Located in the San Francisco East Bay Area PM me if interested. I'll check my PMs in the morning and the evening


Note as of 11-9-18: From further price research, I may have priced this engine to aggressively. I'd like to move this engine on out, so please contact me if at all interested in a NEW 6.1 NEW ones are getting pretty rare and I am willing to work out a lower price, including shipping.


Edited by B5 Classic (11/13/18 01:20 AM)

Top
#2574448 - 11/05/18 12:40 PM Re: For Sale - Modern Mopar/ Gen3 Hemi Engine - 4th Quarter [Re: Dragula]
B5 Classic Offline
member

Registered: 02/25/10
Posts: 19
Loc: Northern California
Not a discussion forum...


Edited by tboomer (11/05/18 02:47 PM)
Edit Reason: not a discussion board

Top
#2579963 - 11/18/18 06:07 PM Re: For Sale - Modern Mopar/ Gen3 Hemi Engine - 4th Quarter [Re: moparts]
junior636 Offline
member

Registered: 10/29/13
Posts: 34
Loc: michigan
SOLD SOLD SOLD

05 5.7 hemi, bullseye 75mm turbo with t4 housing, turbo smart wastegate and blow off valve. Hot and cold side piping for a body dodge. System does require trimming and fitting of the bumper brackets, grill and blinkers. Engine is fresh with new rings gapped for boost @ .028, all new main bearings and rod bearings, push rods, pulleys, water pump, alternator, coil packs, comp cam and springs, comp cams adjustable timing set and milidon a body center pump oil pan. Have dump for exhuast built, it just dumps at the frame but could be built on to. Still needs injectors, spark plugs, serp belt and the oil lines for the turbo ran. I have a bbk ford throttle body for it. $4,000, will not take less. Located in Coopersville Mi.


Edited by junior636 (11/20/18 06:25 PM)

Top
#2579965 - 11/18/18 06:08 PM Re: For Sale - Modern Mopar/ Gen3 Hemi Engine - 4th Quarter [Re: moparts]
junior636 Offline
member

Registered: 10/29/13
Posts: 34
Loc: michigan



SOLD


Edited by junior636 (11/20/18 06:25 PM)

Top
#2580768 - 11/20/18 05:51 PM Icon IC653 .010 pistons for sale [Re: junior636]
ou812 Offline


Registered: 01/31/03
Posts: 5377
Loc: SoCal
Brand new Icon pistons...no rings.
$525.00 shipped in the Cont. U.S.
Brian
mxnaked@yahoo.com

https://www.ebay.com/itm/283318999644


Edited by ou812 (12/27/18 09:53 PM)
_________________________
Brian Hafliger

Top
#2589585 - 12/09/18 06:46 PM Re: For Sale - Modern Mopar/ Gen3 Hemi Engine - 4th Quarter [Re: moparts]
mrploww Offline
enthusiast

Registered: 09/02/03
Posts: 268
Loc: Marysville, OH
MSD 6013 Hemi ignition/timing control for Gen 3 Hemi and 03-05 Hemi Harness for sale. These are brand new in the box, never installed. I am going with EFI on my car, so I do not need this.

$500 plus shipping. Located in central Ohio.


Attachments
IMG_0524.JPG

IMG_0523.JPG

IMG_0527.JPG

IMG_0528.JPG


_________________________
'64 Plymouth Belvedere 9 passenger surf wagon

Top

Advertisement
Forum Stats
25,700 Registered Members
32 Forums
196,768 Topics
2,305,617 Posts

Most users ever online: 1,424 @ 06/20/18 07:18 PM
Moparts Newest Topics
340 6 BBL intake id ?
by moparx
41 minutes 26 seconds ago
When you are bored in the Iowa winter. Mopar related!
by tboomer
Today at 10:57 AM
Best Way to Strip and Refinish Steel Rim
by floyd
Today at 10:49 AM
2002 24valve, I need a little more power
by RV2
Today at 10:44 AM