After pulling this 69 Charger apart 12 years ago I am finally staring the reassembly. I have hundreds of pictures but for some reason none of this area. I just need to see which way the bracket went and how the steel line went to the left frame rail. Any pics would be great. Thanks.

Which brake line - fluid or e-brake?
Which bracket - the one under the driver's floor or the one on the rear frame rail ??

Frame rail e-brake bracket: the steel line from each side on the read end housing clip into the bracket and attach to a two-into-one bracket that the e-brake cable attaches to.

It is the bracket that hangs from the body where the rear axle flex hose attaches with the steel line. I would like to see a picture which would clarify its position as well as the steel line routing along the rear floor to the left frame rail.

Try this. This is a brake line and how it is routed. There is a clip that holds in on the outside face of the frame rail.

Let's not try to make this any harder than it has to be. LOL

That make more sense. I am attaching it to a bracket that is welded to the body floor and has a weld nut. I also see your e-brake cable and am wondering if that attaches to the body bracket that I thought the line bracket went to. Do you by some chance have a pic of the right e-brake cable routing?

Here is a 10 year old photo when I welded the Hemi pinion snubber plate in. I circled in red where I thought it should go. After looking at your photo I see where mine needs to go circled in green. Thanks for the help.

Thanks for the help. Went out in the shop and made sense of things. Now on to the next job.

Yes the right side brake cable bolts to that bracket circled in red.