What pushrod do you use with the 2 bolt offset master cylinder adapter on an a body?

Went with the adjustable rod from Mancinni Racing.Had to grind a little on the bracket under the dash for clearance, the rod was rubbing on the inside surface because of the offset.

I just bought the whole shebang from Dr. Diff.. http://www.doctordiff.com/offset-master-cylinder-adapter.html

I cut my original one and put a sleeve over the cut and welded it back up

I bought the whole shebang also, but there isn't enough room on the left side for the pushrod. He emailed me back saying a lot of the time you have to mill the pedal arm down. I never heard guys having to do that. Figured I'd ask what other evolutionary came up with.

This is the one I bought but I have not installed it

http://www.manciniracing.com/ofadforlamom2.html

I installed one in my '69 Valiant without modification.

If your brake pedal measures much over 1/4" thick at the top, you must spot face it around the pivot hole in a mill for push-rod clearance, however.

Cass