Anyone using Comp Cam # CL20-224-4 in their SB?

Print Thread

Anyone using Comp Cam # CL20-224-4 in their SB? #2481417 04/12/18 01:39 AM 04/12/18 01:39 AM
Joined: Apr 2012 Posts: 1,562 Macomb, MI V vinnyd76 OP pro stock
vinnyd76 OP pro stock V Joined: Apr 2012 Posts: 1,562 Macomb, MI	Anyone using Comp cam # CL20-224-4 in their small block? If so, what is your vehicle usage (street/strip)? 727 with stock torque converter? Rear axle gear ratio? Also looking at CL-222-4 and CL-223-4. I'm considering to run a stock 340 4-barrel torque converter and a 3.55 gear. Exhaust manifolds are preferred. Last edited by vinnyd76; 04/12/18 11:13 AM.

Re: Anyone using Comp Cam # CL20-224-4 in their SB? [Re: vinnyd76] #2483895 04/16/18 10:12 PM 04/16/18 10:12 PM
Joined: Feb 2009 Posts: 207 People's Republic of Mass. B Belvedere2 enthusiast
Belvedere2 enthusiast B Joined: Feb 2009 Posts: 207 People's Republic of Mass.	What heads? Comp ratio? I assume your running a 340. I like this cam from Hughes but I have W-2s. HUG SEH2832AL-10

Hop To