Previous Thread
Next Thread
Print Thread
Page 2 of 11 1 2 3 4 10 11
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341440
11/26/12 12:27 AM
11/26/12 12:27 AM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
primer


71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341441
11/26/12 12:28 AM
11/26/12 12:28 AM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
good picture


71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341442
11/26/12 12:29 AM
11/26/12 12:29 AM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
thats all for now


71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341443
11/26/12 10:22 AM
11/26/12 10:22 AM
Joined: Jan 2010
Posts: 1,992
midwest
6
68427vette Offline
top fuel
68427vette  Offline
top fuel
6

Joined: Jan 2010
Posts: 1,992
midwest
nice , i'll be watching, color????

Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: 68427vette] #1341444
11/26/12 10:38 PM
11/26/12 10:38 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
what i had in mind for a while is B7 blue, black interior, black vynal top, black R/T stripe, B7 steel wheels w/ dog dish, power windows, rallye gauges, floor shift auto, and shaker is what i plan on/hope to have when its done


71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341445
11/27/12 10:54 AM
11/27/12 10:54 AM
Joined: Jan 2003
Posts: 6,583
SE Pa.
L
LimeliteAero Offline
master
LimeliteAero  Offline
master
L

Joined: Jan 2003
Posts: 6,583
SE Pa.
SWEET!
I cant wait to see it. with your support group you may be finished before I finish my project.

Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: LimeliteAero] #1341446
11/27/12 06:27 PM
11/27/12 06:27 PM
Joined: Aug 2003
Posts: 8,000
Millersville, PA
HemiChallenger Offline
master
HemiChallenger  Offline
master

Joined: Aug 2003
Posts: 8,000
Millersville, PA
Nice project you got there. Get that thing together and well criuse. were not to far from each other. Let me know if you need any parts, i gotta bunch of extra stuff ...

Steve

Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: HemiChallenger] #1341447
11/27/12 10:49 PM
11/27/12 10:49 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
thanks guys and steve i will deffinatly let you know if i need any parts, i most likely will and meeting up and cruizing sounds like a great idea


71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341448
12/10/12 11:01 PM
12/10/12 11:01 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
over the past week and weekend i got some more work done getting me a few steps closer to body work

7497930-floorDrside.jpg (489 downloads)

71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341449
12/10/12 11:03 PM
12/10/12 11:03 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
repaired the small swiss cheese rust holes in the floor
thanks to who ever pulled the carpet out a long time ago it saved me tons of work replacing a floor pan

7497935-floorpsside.jpg (367 downloads)

71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341450
12/10/12 11:06 PM
12/10/12 11:06 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
repaired the blistered frame rail

7497942-framerail.jpg (422 downloads)

71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341451
12/10/12 11:07 PM
12/10/12 11:07 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
more frame rail repairs

7497947-framerail2.jpg (390 downloads)

71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341452
12/10/12 11:41 PM
12/10/12 11:41 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
need some advice from fellow members preferrably someone who has replaced a fire wall. as you can see in some of the pictures i posted my cowl and the firewall are fairly rotted so i plan on replacing the fire wall and upper cowl with the AMD parts but i want to do it with taking as little as possible off the car

my question for everyone is how should i go about bracing the car and if i should make a jig for the whole car to sit on before i start taking it apart and what i should do to make sure my car is straight when its all done, im not exactly sure where to start so any input would be greatly appreciated and i have time before i start the firewall, i have to finish the trunk area first because its already apart, so any thing you have that mite help me please give me your thoughts (its my first restoration trying to get as much help as i can)

thanks
Bryan


71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341453
12/11/12 11:38 AM
12/11/12 11:38 AM
Joined: Jan 2010
Posts: 1,992
midwest
6
68427vette Offline
top fuel
68427vette  Offline
top fuel
6

Joined: Jan 2010
Posts: 1,992
midwest
here's some motivation from Alan's site!! a real 440/6 71 gutted

http://www.alangallantautomotiverestoration.com/1971-440-6-Challenger.html


Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: 68427vette] #1341454
01/06/13 01:37 PM
01/06/13 01:37 PM
Joined: Feb 2007
Posts: 30
Chandler AZ USA
A
AZMoparboy Offline
member
AZMoparboy  Offline
member
A

Joined: Feb 2007
Posts: 30
Chandler AZ USA
Hi Bryan,
My Challenger looked a lot like yours in the firewall area. I changed mine out as you are thinking of doing.

I first studied lots of threads on here to figure out just what needed to be reinforced on the body of the car. I then went and bought steel to frame up the front of the car. I only have one picture of my car with the framing under the front of the car and hope this helps out. The rest of the car was all together. These cars are very rigid and lite, taking out one piece of the car and having it supported will keep every thing in place.

There is a thread here on moparts.com, in the member projects & survivor pictures called, "Project Rust Bucket: 1971 Challenger R/T". This thread has lots of pictures and you can see many ways to rig up the body of your car to hold it in place to change out your firewall.

These cars are not perfect from the factory. Yes they had tooling to hold the pieces together as it was welded together, but as you can read from anyone that has restored any of the old chrysler cars, no, one car is just like the other.

Just one more thing that I found to be just a little hard to work with was that I bought the cowl and firewall as one unit. I don't know how perfectly square these two items are from the vendor, but it was difficult. With the two pieces welded together it is a very rigid structure and I had to work hard to get the unit installed.

To all that read this, I am in no way a pro at this restoration stuff. This is just the way I did it and in no way implying that this is the only way or may not even be the way to do it at all. I don't want to come off like I know anything, I'm self tought.

Good luck, I will attach a pic.
Steve

Last edited by AZMoparboy; 01/06/13 03:02 PM.
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: AZMoparboy] #1341455
01/06/13 03:04 PM
01/06/13 03:04 PM
Joined: Feb 2007
Posts: 30
Chandler AZ USA
A
AZMoparboy Offline
member
AZMoparboy  Offline
member
A

Joined: Feb 2007
Posts: 30
Chandler AZ USA
Here is one of the firewall installed

Last edited by AZMoparboy; 01/06/13 03:06 PM.
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: AZMoparboy] #1341456
01/06/13 10:42 PM
01/06/13 10:42 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
thanks alot for your input, im no expert either this is my first restoration. im 18 but have a number of people with experiance willing to help me so im learning as i do it and knowing its been done before id like to get as much input as possible to try and make better decisions when i go to fix my fire wall,

also i havent updated recently, been busy with the holidays and all that good stuff but have been working on it and will post new pictures hopefully this week ,Bryan


71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341457
01/06/13 11:00 PM
01/06/13 11:00 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
and theres a change in plans with the finished project, ive been looking at different cars on the internet and toying around with different combos in my head, so my plan for the car is

B7 blue
black vynal top
black interior
black R/T stripe
power windows
rallye guages
15x7 black steel wheels with dog dish caps
440 sixpack 4 speed w/ console
shaker hood

its pictured in my head and the only thing i would want different is a Hemi in place of the 440+6 but lets face it im 18 i cant afford no Hemi


71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341458
01/08/13 11:41 PM
01/08/13 11:41 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
setting the trunk floor


71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Re: 71challenger 440+6 shaker clone FAST/my HS grad present [Re: clonedshaker+6] #1341459
01/08/13 11:46 PM
01/08/13 11:46 PM
Joined: May 2012
Posts: 223
Oreland Pa
clonedshaker+6 Offline OP
enthusiast
clonedshaker+6  Offline OP
enthusiast

Joined: May 2012
Posts: 223
Oreland Pa
under side, original tank straps screwed in to make sure the fit is good on the new floor


71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present)
03 mustang Mach 1 (daily driver)

11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
Page 2 of 11 1 2 3 4 10 11






Powered by UBB.threads™ PHP Forum Software 7.7.1