Topic Options
#2462819 - 03/07/18 07:12 PM Hellcat Blower
Dragula Offline


Registered: 05/02/04
Posts: 10267
Loc: Taxes R-US, NY
So would a Hellcat blower support a 426 cube stroker?
_________________________
'71 Duster Pump Gas 512LD 2013 Mod Gas Winner GRS
https://www.youtube.com/watch?v=Z_XTmRBuvWs (6.19)
https://www.youtube.com/watch?v=gQZGfDBPROM (9.70 at 138.5mph)

'70 Cuda, Plan C....605 Hemi
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.31)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

Top
#2462926 - 03/07/18 10:05 PM Re: Hellcat Blower [Re: Dragula]
hudsonhornet7x Offline
super stock

Registered: 01/14/12
Posts: 1084
Loc: Plumer, Pa
I would say so, there are several stroker hellcat challengers out and about now. It would be one wicked ride for sure.
_________________________
XP29H8B198192

Top
#2462945 - 03/07/18 10:53 PM Re: Hellcat Blower [Re: Dragula]
toplescuda Offline
I Whine

Registered: 01/22/03
Posts: 8592
Loc: poplar bluff mo.
Hmmmm I'm not sure. There is a bunch of cubic inch differance from a 6.2 And a 426......i would think if it would support a 426. They would not put a larger blower on the demon when it's the same size motor
What's a 6.2 377 or so. inches?
_________________________
1970 barracuda convert. 1 of 59
1970 pro street A.A.R. clone (panther pink)
1971 charger
2015 hellcat challenger. Redline red
2014 quad cab 4x4 ram 8 speed hemi

Top
#2462989 - 03/08/18 05:36 AM Re: Hellcat Blower [Re: toplescuda]
Dragula Offline


Registered: 05/02/04
Posts: 10267
Loc: Taxes R-US, NY
Originally Posted By toplescuda
Hmmmm I'm not sure. There is a bunch of cubic inch differance from a 6.2 And a 426......i would think if it would support a 426. They would not put a larger blower on the demon when it's the same size motor
What's a 6.2 377 or so. inches?


Correct on the cubes...the stock Hellcat blower is rated a 2.4L, the Dragpak uses a 2.9 Whipple, and there is a couple new blowers out there that are considerably bigger.

The Hellcat pushes the 377 cube engine to 10-11psi.....If I go with one of those and add 50 cubes, I would have to over drive it. Any idea how much to get back to 11psi?


Edited by Dragula (03/08/18 05:42 AM)
_________________________
'71 Duster Pump Gas 512LD 2013 Mod Gas Winner GRS
https://www.youtube.com/watch?v=Z_XTmRBuvWs (6.19)
https://www.youtube.com/watch?v=gQZGfDBPROM (9.70 at 138.5mph)

'70 Cuda, Plan C....605 Hemi
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.31)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

Top
#2463117 - 03/08/18 12:07 PM Re: Hellcat Blower [Re: Dragula]
HotRodDave Offline
master

Registered: 01/29/05
Posts: 9828
Loc: Kalispell Mt.
Thats what %9 bigger or so? Seems around %10 OD would allow similar levels of boost, I am sure it is not an exact thing but it should get you in the ball park.
_________________________
I am not causing global warming, I am just trying to hold off a impending Ice Age!

68 cuda 360 notchback SOLD

1996 Ram 2500 5.9 eddy intake EQ heads, mild cam upgrade great tow rig!


Top
#2463234 - 03/08/18 03:37 PM Re: Hellcat Blower [Re: Dragula]
WO23Coronet Online   content
master

Registered: 01/08/08
Posts: 4076
Loc: Canada
Plenty of overdriven Hellcat blowers as well. They seem to be able to deliver more psi when overdriven and not just create heat.

Top
#2463587 - 03/09/18 05:04 AM Re: Hellcat Blower [Re: Dragula]
toplescuda Offline
I Whine

Registered: 01/22/03
Posts: 8592
Loc: poplar bluff mo.
And a bunch of the overdrive blowers with fail bearings. Just buy a demon blower. Or. Kenne bell has a 4.2 blower...
_________________________
1970 barracuda convert. 1 of 59
1970 pro street A.A.R. clone (panther pink)
1971 charger
2015 hellcat challenger. Redline red
2014 quad cab 4x4 ram 8 speed hemi

Top
#2464144 - 03/09/18 11:39 PM Re: Hellcat Blower [Re: Dragula]
L4staero Offline
member

Registered: 09/10/11
Posts: 86
Loc: Australia
They seem to have no problems keeping up with 426 cube motors. They ofcoarse need to be spun faster to produce the same boost. On a std HC a 10% OD lower will add about 3 psi. Going from a std 3.35" blower to a 2.65 one as well will give you around 18-19 psi. Change the motor to 426 cubes with head work and a different cam and the same pullies that gave 19 psi is now down around 11-12 psi.

Spinning them faster doesnt seem to be a catalyst for bearing failures


Edited by L4staero (03/09/18 11:40 PM)

Top
#2464689 - 03/11/18 10:57 AM Re: Hellcat Blower [Re: Dragula]
ric3xrt Offline
super stock

Registered: 01/13/06
Posts: 1135
Loc: Trumbauersville PA
they fail no matter the rpm,
_________________________
Truth has no agenda, but those with an agenda make their own truth.
Some of us are so open minded they only see their View




Top
#2464848 - 03/11/18 04:26 PM Re: Hellcat Blower [Re: Dragula]
WO23Coronet Online   content
master

Registered: 01/08/08
Posts: 4076
Loc: Canada
I thought they've updated the blowers and fixed the bearing problems?

Top
#2464943 - 03/11/18 07:40 PM Re: Hellcat Blower [Re: Dragula]
hudsonhornet7x Offline
super stock

Registered: 01/14/12
Posts: 1084
Loc: Plumer, Pa
Yes, there are certain part numbers on the blowers that are " updated and fine"
_________________________
XP29H8B198192

Top
#2465094 - 03/12/18 07:20 AM Re: Hellcat Blower [Re: hudsonhornet7x]
ric3xrt Offline
super stock

Registered: 01/13/06
Posts: 1135
Loc: Trumbauersville PA
Originally Posted By hudsonhornet7x
" updated and fine"



my neighbor and his 2017 Hellcat will disagree.
_________________________
Truth has no agenda, but those with an agenda make their own truth.
Some of us are so open minded they only see their View




Top
#2465179 - 03/12/18 11:11 AM Re: Hellcat Blower [Re: ric3xrt]
hudsonhornet7x Offline
super stock

Registered: 01/14/12
Posts: 1084
Loc: Plumer, Pa
Originally Posted By ric3xrt
Originally Posted By hudsonhornet7x
" updated and fine"



my neighbor and his 2017 Hellcat will disagree.


I can understand that. From what I have read there are several batches with noisy bearings. Sucks to be sure. Has your neighbor had his blower replaced?
_________________________
XP29H8B198192

Top
#2465195 - 03/12/18 12:01 PM Re: Hellcat Blower [Re: Dragula]
ric3xrt Offline
super stock

Registered: 01/13/06
Posts: 1135
Loc: Trumbauersville PA
Dealer replaced it in Nov, and when it started again in early Feb that's when we changed it out for a new 4.5l Whipple,
We have salesman here at work that has a 2015 with 45k on it supercharger was replaced at 11k and it's been good since. Now both of these guys will tell you FCA bent over backwards to keep them satisfied.

Top
#2465353 - 03/12/18 05:05 PM Re: Hellcat Blower [Re: Dragula]
Silver70 Offline
I Live Here

Registered: 02/01/03
Posts: 18205
Loc: Rust Belt, SW PA
Guess when I see a cheap one for sale on ebay, I know why.
_________________________
68 Road Runner, 69 Belvedere, 71 Challenger Vert
340 barracuda, 01 Ram CTD, 95 Ram, 04 Ram, 85 Daytona turbo Z
99 Trans Am, 66 GTO, 06 Magnum RT AWD

Top
#2465586 - 03/12/18 10:55 PM Re: Hellcat Blower [Re: Dragula]
WO23Coronet Online   content
master

Registered: 01/08/08
Posts: 4076
Loc: Canada
I saw mention on Hellcat.org of a guy who offers rebuild services for these blowers with a new problem solver bearing that’s supposed to fix this. Of course it’s a proprietary bearing that he doesn’t sell to anyone

Top
#2466092 - 03/13/18 09:07 PM Re: Hellcat Blower [Re: Dragula]
toplescuda Offline
I Whine

Registered: 01/22/03
Posts: 8592
Loc: poplar bluff mo.
Yes. For 1800.00 bucks
_________________________
1970 barracuda convert. 1 of 59
1970 pro street A.A.R. clone (panther pink)
1971 charger
2015 hellcat challenger. Redline red
2014 quad cab 4x4 ram 8 speed hemi

Top

Advertisement
Forum Stats
25,485 Registered Members
32 Forums
192,903 Topics
2,251,749 Posts

Most users ever online: 1,424 @ 06/20/18 07:18 PM
Moparts Newest Topics
Mopar Max at Cedar Falls Motorsports Park Sept 29-30th
by tboomer
09/18/18 05:35 PM
Hopping up my 318
by Brandon_689
09/18/18 03:39 PM
72 Honda 4x4 Barret Jackson special
by Neil
09/18/18 03:35 PM
Street Outlaws type racing
by cdwmotorsports
09/18/18 03:35 PM