Topic Options
#2461196 - 03/04/18 07:46 PM Oil leakage around rocker stands
SSDart Offline
member

Registered: 09/09/13
Posts: 168
Loc: Moparts
I was pre-lubing my engine on the engine stand today. We noticed a lot of oil leaking out past the rocker shaft hold down. Never really noticed this before. Has anyone seen this or rectified it before?

I did take one of the stock hold downs and put an O ring between the shaft and the hold down. Stopped the leak on the top but there was still a leak between the pedestal and the shaft....

Top
#2461198 - 03/04/18 07:49 PM Re: Oil leakage around rocker stands [Re: SSDart]
Cab_Burge Offline
I Win

Registered: 08/23/03
Posts: 30818
Loc: Bend,OR USA
Maybe it is time to check the shafts for out of round at the mounting holes work scope twocents Good find up
There are fixes for all problems, determining the cause and fix is the hard part sometimes work
Which motor?
Let us know what you find thumbs


Edited by Cab_Burge (03/05/18 01:20 AM)
_________________________
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Top
#2461199 - 03/04/18 07:57 PM Re: Oil leakage around rocker stands [Re: SSDart]
SSDart Offline
member

Registered: 09/09/13
Posts: 168
Loc: Moparts
Shafts are round I mic'd them at assembly. Max. .001 out of round. The O ring fix's the top. Just wondering if there is something I can try under the shaft between pedestal and shaft?

Its a 340...

Top
#2461212 - 03/04/18 08:29 PM Re: Oil leakage around rocker stands [Re: SSDart]
rickraw Online   content
top fuel

Registered: 10/29/10
Posts: 1961
Loc: Ambridge, Pa.
put a film of anerobic sealer on the pedestal. It won't come off & get in the oil.

Top
#2461219 - 03/04/18 08:46 PM Re: Oil leakage around rocker stands [Re: rickraw]
SSDart Offline
member

Registered: 09/09/13
Posts: 168
Loc: Moparts
Thanks Rick... Never heard of this sealer before. What is the consistency like? Does it get brittle like Loctite? Or is it closer to a silicone consistency?


Rick Have you ever tried using the Anaerobic sealer on the pedestals before?


Edited by SSDart (03/04/18 09:14 PM)

Top
#2461260 - 03/04/18 09:32 PM Re: Oil leakage around rocker stands [Re: SSDart]
BradH Offline
I Live Here

Registered: 01/30/03
Posts: 13724
Loc: Valhalla... eventually
Use it sparingly. It gets hard when it cures and may need to be chipped off during disassembly. I've used it when I had tapered shims under the shafts.
_________________________
This space intentionally left blank... except where it says: "This space intentionally left blank"

Top

Advertisement
Sponsored Link
Forum Stats
25,351 Registered Members
32 Forums
190,290 Topics
2,220,371 Posts

Most users ever online: 1,424 @ 06/20/18 07:18 PM
Moparts Newest Topics
Cuda vs Barracuda trim
by fastmark
06/24/18 07:08 AM
SPD on my AAR
by fastmark
06/24/18 06:24 AM
1969 Plymouth Road Runner n/a
by tomsjack
06/24/18 04:23 AM
Solid roller cam valve spring and lifter question
by Pockets
06/24/18 01:42 AM