Re: Drum brake master cylinder studs
[Re: crowbait]
#2453787
02/19/18 03:39 AM
02/19/18 03:39 AM
|
Joined: Dec 2007
Posts: 12,587 Great Neck,LI,new york
hemi-itis
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 12,587
Great Neck,LI,new york
|
I'm changing the master now,when I get down to the garage I will try to get you a measurement.
HEMI-ITIS has no cure. My condition is fully BLOWN!!
|
|
|
Re: Drum brake master cylinder studs
[Re: crowbait]
#2457594
02/25/18 11:22 PM
02/25/18 11:22 PM
|
Joined: Nov 2008
Posts: 1,565 tennessee
pushbutton
pro stock
|
pro stock
Joined: Nov 2008
Posts: 1,565
tennessee
|
Ok
original off my 66 coronet manual drum car measures 0.240.
Both new parts store ones measure 0.360-0.370.What gives? I guess I am gonna have to look around for studs with larger knurl dia. Put a little quick set JB Weld on the knurls,It should hold until you get the nuts started. I have used super glue, the thicker kind,but the JB would work better.
|
|
|
Re: Drum brake master cylinder studs
[Re: crowbait]
#2458384
02/27/18 02:05 PM
02/27/18 02:05 PM
|
Joined: Dec 2007
Posts: 12,587 Great Neck,LI,new york
hemi-itis
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 12,587
Great Neck,LI,new york
|
I found the stud holes to be 5/16,the holes in the adapter for my master upgrade are 5/16.BUT,,the adapter I bought has larger holes in them so everything will be nut & bolted.
HEMI-ITIS has no cure. My condition is fully BLOWN!!
|
|
|
Re: Drum brake master cylinder studs
[Re: hemi-itis]
#2458444
02/27/18 04:01 PM
02/27/18 04:01 PM
|
Joined: May 2012
Posts: 1,819 South Bend
John Brown
top fuel
|
top fuel
Joined: May 2012
Posts: 1,819
South Bend
|
I found the stud holes to be 5/16,the holes in the adapter for my master upgrade are 5/16.BUT,,the adapter I bought has larger holes in them so everything will be nut & bolted. How about putting sleeves on the studs, or sleeves in the holes?
July 19th should be "Drive Like Rockford Day". R.I.P. Jimmie.
|
|
|
|
|