|
Roller cams, again.
#2452187
02/15/18 04:18 PM
02/15/18 04:18 PM
|
Joined: Jan 2003
Posts: 10,702 North Dakota
6PakBee
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 10,702
North Dakota
|
Continuing with my pursuit of retrofit hydraulic roller B/RB camshafts, this board was immensely helpful with the oil pump drive gear. So.. the next concern...fuel pump pushrod. What should I use for an aftermarket hydraulic roller?
"We live in a time when intelligent people are being silenced so that stupid people won't be offended".
|
|
|
Re: Roller cams, again.
[Re: 71birdJ68]
#2452481
02/16/18 12:10 PM
02/16/18 12:10 PM
|
Joined: Jan 2003
Posts: 10,702 North Dakota
6PakBee
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 10,702
North Dakota
|
What's the cam made of? Call the cam maker and ask them. Billet cam.
"We live in a time when intelligent people are being silenced so that stupid people won't be offended".
|
|
|
Re: Roller cams, again.
[Re: 6PakBee]
#2452491
02/16/18 12:28 PM
02/16/18 12:28 PM
|
Joined: Feb 2012
Posts: 4,450 Morristown Tn.
71birdJ68
master
|
master
Joined: Feb 2012
Posts: 4,450
Morristown Tn.
|
If the cam is kind of copper color then use a bronze or coated gear, and bronze tip fuel pump push rod.
Last edited by 71birdJ68; 02/16/18 12:53 PM.
|
|
|
Re: Roller cams, again.
[Re: 451Mopar]
#2452811
02/16/18 10:07 PM
02/16/18 10:07 PM
|
Joined: Jan 2003
Posts: 10,702 North Dakota
6PakBee
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2003
Posts: 10,702
North Dakota
|
Thanks everybody, the brass tipped pushrod it is!!
"We live in a time when intelligent people are being silenced so that stupid people won't be offended".
|
|
|
|
|
|