Page 5 of 9 < 1 2 3 4 5 6 7 8 9 >
Topic Options
#2437794 - 01/19/18 11:04 PM Re: For Sale - Race Parts - 1st Quarter [Re: moparts]
brownout Offline

Registered: 12/20/11
Posts: 264
Loc: ca
Champion speed series wheels powdercoated black 15x3.5 and 2.25 inch backspace and 4.5 inch bolt pattern with M/T ET fronts mounted and balanced.

front tires 26/4.5/15

everything is brand new and never run.

asking $675

call or text Cody at 916-494-8888


Edited by brownout (01/24/18 02:29 AM)

#2437796 - 01/19/18 11:10 PM Re: For Sale - Race Parts - 1st Quarter [Re: brownout]
brownout Offline

Registered: 12/20/11
Posts: 264
Loc: ca


Edited by brownout (01/21/18 11:11 PM)

#2437975 - 01/20/18 12:33 PM Re: For Sale - Race Parts - 1st Quarter [Re: moparts]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 3227
Loc: Kansas Roads Between 0 and 140...
2 Cometic MLS Head Gaskets C5622-070

I paid $205 to my door from summit for the pair.

Shoot me a fair offer if these fit your needs.

Pm me here please.



#2437981 - 01/20/18 12:53 PM Re: For Sale - Race Parts - 1st Quarter [Re: moparts]
DavidDean Offline
pro stock

Registered: 03/28/03
Posts: 1496
Loc: Lubbock,TX
M/T Race tubes to fit 14 x 32 tire #9558 $100.00 pair + shipping PM me for more info & pics

#2438172 - 01/20/18 08:44 PM Re: For Sale - Race Parts - 1st Quarter [Re: moparts]
steve660 Offline

Registered: 04/06/07
Posts: 251
Loc: Lowes

$200.00 for the pair.
Part number S5081.
Compressed length is 10.34.
Extended length is 14.97.
These have 6 passes on them.
Couldnt figure them out,so i put old 3 ways back on.
Ran these on 72 E body.
Summit lists these fitting other bodys too.
Double check your ext/compressed lengths.
Message me and i can send pics.

Edited by steve660 (01/20/18 10:31 PM)
MM 632 wedge, REPAIRED, ASSEMBLED CORRECTLY by Don Burlington, Liberty Mo.

#2438419 - 01/21/18 11:47 AM Re: For Sale - Race Parts - 1st Quarter [Re: steve660]
RapidusMaximus Offline
top fuel

Registered: 06/04/03
Posts: 1831
Loc: Haslet, Texas
Sold... Thanks Moparts! 1970 Roadrunner, Satellite, GTX bolt on fiberglass hood, six pack scoop, brand new US Body Source only removed from crate for pics. 500 obo, prefer pick up but will ship at buyers expense. Pm me here or email alilblacktruckatgmaildotcom




Edited by RapidusMaximus (01/24/18 03:27 PM)
1968 Plymouth GTX 440 4 Speed Dana
1973 Small block Duster under construction
1974 Dodge P/U Long Bed Stepside 318 Auto
1975 Jeep CJ5
2016 Dodge Ram Hemi 1500

#2439017 - 01/22/18 12:02 PM Re: For Sale - Race Parts - 1st Quarter [Re: RapidusMaximus]
cudacar340 Offline
super stock

Registered: 02/01/04
Posts: 831
Loc: Grosse Isle, Mi
New unused 440 Tunnel Ram intake, fits RB Mopar 413 426 440. Was never bolted on. Not cut or ported. Painted black. 350
cash, postal M/O or paypal or I would trade for aluminum 6 pack intake (RB)
please call Dave 734-692-7151

Edited by cudacar340 (01/24/18 08:22 AM)

#2439769 - 01/23/18 07:40 PM Turbo Action Reverse Manual Shift Valve Body - New [Re: RapidusMaximus]
Rocket Offline

Registered: 02/25/06
Posts: 452
Loc: CT
I have a new Turbo Action reverse pattern manual shift valve body part # 17156. This is a competition series valve body. Very firm shifts. Works in A904, A998, A999 and 727 transmissions. There is no engine braking in first gear with this valve body. New still in its original packaging.

Price is $290 shipped in the lower 48 states.

I am willing to ship internationally for the additional cost.

Contact with any questions.



Edited by Rocket (01/23/18 07:41 PM)

#2440032 - 01/24/18 11:38 AM Re: For Sale - Race Parts - 1st Quarter [Re: moparts]
camastomcat Offline
top fuel

Registered: 04/12/05
Posts: 1999
Loc: Salt Lake City
Mopar Predator 604
I’m going to throw this out there as I am changing directions and would like to sell this engine in pieces or complete. So for you Mopar or no car guys, this the best option for maximum power without going gen 3 hemi pro stock stuff. Rings, bearings, gaskets, other parts to assemble have been ordered. The engine will be complete and professionally assembled in the next month. If these parts haven’t sold, it will be going into my dragster and I will use it. I would like to sell it, but I don’t have to sell it. Until a deposit has been received, it is still for sale from now on. Not losing anymore sales due to looky loos.
Hard to find World cast steel hemi block, squared, decked, trued
O-ringed, 55mm roller cam bearings, 4.560 bore with custom head gaskets
Custom Predator specific 55mm roller cam (specs only to interested party)
15-1 custom 4.56 bore Ross pistons, 2 spares
Winberg Center counter weight billet crankshaft 4.625, .010 mains, standard rods
The crankshaft I bought new and isn’t a used POS from a previous fuel car
Bushed lifter bores with .040 restriction feed
Oliver billet rods 2.200, .990
Jessel belt drive with provision for front drive distributor
New rings, bearings
Block alone $5,500
Short block, cam, ATI special damper, Jessel, crank trigger parts you assemble $8,500
Machine shop assembled $9,700
Weaver big dry sump oil system with tank, lines, Williams custom pan and fixtures, add $2,800

Heads and top end
Big Boy Hemi Predator heads Titanium 2.45 intake, 1.900 Ex valves
1.8 and 1.9 T&D Rockers with pushrod and spring oiling and upgrades
Marcella tunnel ram with single and double tops
Flow in the low 500+ range with 4.56 fixture, have flow sheets with 4.440 fixture
Front drive distributor, Crower ultra .937 bushing offset .180 lifters
7/16 double taper Smith Bros. push rods
All parts fresh and in bags $15,000 with Marcella intake and all rockers or $12,500 with cast intake and 1 set of rockers, with Gary Williams 1150 dominators add $1,800
Without carbs, intake, and dry sump and apart for inspection $21,000
Intake to dry sump, with dragster headers, $27,500
Williams 1150 Carbs to pan $29,000, with Dyno $29,700
Call Tom 801 949 7791

20160718_153729 (2).jpg

header pic predator.jpg

Lucas Oil vs Gans Ink pic.jpg

predator 604 1.jpg

#2440321 - 01/24/18 09:21 PM Re: For Sale - Race Parts - 1st Quarter [Re: moparts]
jhat Offline

Registered: 11/12/14
Posts: 16
Loc: pa
Mopar a body big block headers
Mazzaloni 2 to 2 1/8 step headers
Exc condition
Black hi temp coated
$500 plus shipping

Indy sr heads
Std intake size
Ported by modern
2.25 Intake valve
Roller spring / titanium retainers
Very low runs
Comes w/ port matched Victor 4500 intake
$1500 plus shipping
610 327 4810

#2440327 - 01/24/18 09:24 PM Charlie’s Rear Sump Aluminum Small Block Oil Pan - New [Re: jhat]
Rocket Offline

Registered: 02/25/06
Posts: 452
Loc: CT
I have a new Charlie’s aluminum rear sump oil pan that has the 360 small block pan rear cut out dimension. It features a baffled sump and uni-directional PTFE coated windage screen. The sump holds 4 quarts of oil up to the acceleration baffles. There is room for additional quarts below the windage screen. Distance from the pan rail to sump bottom is 8.5 inches.

Price is $500 plus shipping

Email for more information.



#2441468 - 01/27/18 10:47 AM Mickey Thompson Tubes [Re: moparts]
68DART360 Offline

Registered: 08/31/03
Posts: 428
Loc: Easton, PA
Mickey Thompson tubes part # 9555. Fits 28-31" diameter and 10 1/2 to 11 1/2 tread. Very little use. Asking $80 for the pair. PM me here

#2441680 - 01/27/18 04:55 PM 2-1/4" BB Headers [Re: 68DART360]
cl440 Offline
top fuel

Registered: 02/05/03
Posts: 2338
Loc: S.E. Michigan
Make a reasonable offer before I scrap them!
These were in an 85 Daytona chassis car that we bought. We had a new set made for the car so no longer need these. Headers only. No collectors. They have the usual clearance dents and dings and surface rust. Pick up only no shipping

$200.00 OBO

PM me or email





#2441689 - 01/27/18 05:07 PM Painless [Re: cl440]
cl440 Offline
top fuel

Registered: 02/05/03
Posts: 2338
Loc: S.E. Michigan
SOLD Painless switch panel used. Missing the (4) small screws that hold the switch panel to the box.

$100.00 OBO plus the ride

PM me or



Edited by cl440 (01/29/18 08:41 PM)


#2441697 - 01/27/18 05:29 PM Re: Moroso [Re: cl440]
cl440 Offline
top fuel

Registered: 02/05/03
Posts: 2338
Loc: S.E. Michigan
SOLD Moroso Toggle Switch Panel 74131

Used in good condition.

$35.00 plus the ride

PM me or



Edited by cl440 (01/29/18 02:12 PM)


#2441717 - 01/27/18 06:16 PM Wheel Studs [Re: cl440]
cl440 Offline
top fuel

Registered: 02/05/03
Posts: 2338
Loc: S.E. Michigan
Used 1/2" 20 RH 3" Screw in wheel studs (set of 10)

$15 plus the ride

pm me or




#2441868 - 01/27/18 09:42 PM Re: For Sale - Race Parts - 1st Quarter [Re: moparts]
bpattp444 Offline

Registered: 05/23/06
Posts: 8
Loc: TX
Bryant 4.50 Crank
Cross drilled (rod & main) turned -.010, no cracks ready to run. Hemi or Big block Mopar
$700 +Shipping

Cell/text 832-640-3859
Alvin, Tx

Crank 1a.jpg

#2441915 - 01/27/18 10:38 PM Re: For Sale - Race Parts - 1st Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13792
Loc: oak park, il.
One set of original Max Wedge rocker arms and stands $300.00 for everything (708)288-2879 Scott

Max Wedge Rockers 001.JPG

Max Wedge Rockers 002.JPG

#2442121 - 01/28/18 09:07 AM 360 turbo motor [Re: dsd70bee]
dodge turbo Offline

Registered: 09/08/07
Posts: 452
Loc: Dirty Dena, Maryland
Recently freshed up. Built and maintained by Jim Bowen racing engines (Glenrock Pa)
Early 360 block .30 over
Ross ceramic coated pistons 8:1 comp. hellfire rings
Cometic head gaskets
M1 intake
Xheads with small port job. Stainless valves. Gold roller rockers
Eagle crank and rods
Arp studs in bottom end and top end
Comp custom Turbo hydraulic cam
Intake to oil pain

Maybe a 1000 miles since freshen up and 4 passes down the 1/4 for logging purposes not running above 5,500 rpm
Timing has been kept conservative using a 6530 box and has fitech on it so its been run rich.
On 14psi during the logging passes it went 130mph in a almost 3800lb truck
Runs on pump gas! Drives like a stock 360 and is very mild mannered.

Im wanting to step up to a gen3 that is why im selling. Its still in the truck so you can hear it
Run.. I will pull it upon deposit.

This is intake to oil pan no assecories. I’ll throw in a brand new MSD billet dizzy if you pay my asking price
********$4,800 OBO*******



Edited by dodge turbo (01/29/18 10:26 AM)
Edit Reason: Price change
78 Adventurer 150small block turbo'd 360w/Borg S475....smoke'em

#2442302 - 01/28/18 01:30 PM Big Block Bronze Geared Distributor & Oil Pump Drive [Re: dodge turbo]
Rocket Offline

Registered: 02/25/06
Posts: 452
Loc: CT
I have a new Mopar Performance distributor and oil pump drive part # P3690875 for Big Block engines. $115 shipped in the lower 48 states. PM me if interested. I will ship internationally for the additional cost.



Edited by Rocket (01/28/18 01:31 PM)

Page 5 of 9 < 1 2 3 4 5 6 7 8 9 >

Sponsored Link
Forum Stats
25,140 Registered Members
32 Forums
186,583 Topics
2,170,719 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Power Drum Brakes: Pedal Goes to Floor?
by 70runner
02/17/18 10:24 PM
Harbor Freight tumbler for small rusty parts???
by wkroncke17
02/17/18 09:20 PM
1973 Road Runner Hood WIW
02/17/18 08:51 PM
Neon Charger Sign
02/17/18 08:32 PM