Page 14 of 15 < 1 2 12 13 14 15 >
Topic Options
#2447272 - 02/06/18 01:03 AM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: ozymaxwedge]
LA360 Offline
master

Registered: 01/20/03
Posts: 5584
Loc: Melbourne , Australia
Correct!
_________________________
Alan Jones

Top
#2447331 - 02/06/18 09:32 AM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
copchaser Offline
super stock

Registered: 02/06/07
Posts: 847
Loc: iowa
My block got shipped from California. Block number 426-555, same block number that Ken Black gave me and sent me pictures of 2 years ago. Block has been checked out, and the machine work that old Ken did is fantastic! I'm still very confused about what's going on at Keith Black. In my nonprofessional white trash opinion, I don't think the powers at Keith Black know who's in charge. I truly do believe that the goat roper who works in the Taco Bell drive-thru could do a better good at figuring out what's going than the owners at KB. Anyway, if I can get pics to load, I'll share some eye candy!

Top
#2447367 - 02/06/18 10:56 AM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
fast68plymouth Offline
I Live Here

Registered: 01/20/03
Posts: 11423
Loc: So. Burlington, Vt.
Is that a teeny tiny glimmer of light I see waaaaaaaaaay way down at the end of that tunnel?
_________________________
68 Plymouth Satellite, 383, stock 906's, 3550lbs, 11.18 @ 123, 1.51 60'
WD- Comp Cams / Indy Cylinder Heads

Top
#2447371 - 02/06/18 11:05 AM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: hemi-itis]
hemi-itis Offline
I Live Here

Registered: 12/29/07
Posts: 10829
Loc: Great Neck,LI,new york
Originally Posted By hemi-itis
Originally Posted By Spaceman Spiff
It's been 9 months since this thread was started...and 7 months since Ray has posted in this thread....

Because of the 3 Gents that took on this project I have faith that it will happen.WHEN.............that's the mystery! work

Make that 4,the flow has begun! up
_________________________
HEMI-ITIS has no cure. My condition is fully BLOWN!!!

New best 60ft,, 1.42,1/8, 6.0 @117,, 9.38 @146.75 with 6 lbs boost @3700 lbs

Top
#2561940 - 10/10/18 12:43 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
racerx Offline
master

Registered: 08/10/08
Posts: 3082
Loc: Mo.
If one was to order one who will you order from.?

Top
#2561971 - 10/10/18 01:34 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
an8sec70cuda Offline
I Live Here

Registered: 01/19/03
Posts: 10943
Loc: Marion, South Carolina [><]
I'd order from Todd Marsh if I was wanting another one.
_________________________
CHIP
'70 hemicuda...8.91 at 150.5 mph street car...Mopar Action feature Dec. '14
'69 road runner 446" w/ Indy SRs
'69 road runner 440-6, 4 speed...Dad's ride
'71 Demon 340 resto project
'06 GMC 2500HD Duramax...toy hauler
'16 Grand Caravan SXT...baby hauler

Top
#2561993 - 10/10/18 02:06 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: an8sec70cuda]
cudatom Offline
super stock

Registered: 02/24/03
Posts: 751
Loc: Massillon, Ohio
Originally Posted By an8sec70cuda
I'd order from Todd Marsh if I was wanting another one.

Agreed Great guy to wk with and will walk you through the process.

Top
#2562065 - 10/10/18 04:20 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
racerx Offline
master

Registered: 08/10/08
Posts: 3082
Loc: Mo.
Isn't he on the sponsor board here?

Top
#2562066 - 10/10/18 04:22 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: cudatom]
sasquatch Offline
top fuel

Registered: 03/26/05
Posts: 2296
Loc: North Carolina
Actually Darren was here at the shop yesterday. LOTS of good news to report but I will let him be the one to do that in the next couple days here. If you are waiting to see what has happened I believe most if not all of you will be pretty satisfied with the results.
_________________________
www.mopartsracing.com

Top
#2562075 - 10/10/18 04:53 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
racerx Offline
master

Registered: 08/10/08
Posts: 3082
Loc: Mo.
Talk to Tod a few minutes ago,all sounds GOOD up

Top
#2562496 - 10/11/18 02:42 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
Al_Alguire Offline


Registered: 01/20/03
Posts: 16871
Loc: Las Vegas
FWIW I have had one on order through Todd since first part of August. Let everyone know when it arrives.
_________________________

"I am not ashamed to confess I am ignorant of what I do not know."

"It's never wrong to do the right thing"

Top
#2562510 - 10/11/18 03:25 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: racerx]
hemi-itis Offline
I Live Here

Registered: 12/29/07
Posts: 10829
Loc: Great Neck,LI,new york
Originally Posted By racerx
Isn't he on the sponsor board here?

Todd IS Marsh Perormance.Easy guy to do spend your money with! up

http://www.mopartsracing.com/


Also an Indy dealer
_________________________
HEMI-ITIS has no cure. My condition is fully BLOWN!!!

New best 60ft,, 1.42,1/8, 6.0 @117,, 9.38 @146.75 with 6 lbs boost @3700 lbs

Top
#2562587 - 10/11/18 06:39 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
racerx Offline
master

Registered: 08/10/08
Posts: 3082
Loc: Mo.
Wish he was closer ,probably consider him for my next build. up

Top
#2562597 - 10/11/18 07:10 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
sasquatch Offline
top fuel

Registered: 03/26/05
Posts: 2296
Loc: North Carolina
Ask Racer X, I told him the line formed to the left and there were 6 in line.You are number 3 Al. Good report from Darren on Tuesday. Things are moving in the right direction.
Todd
_________________________
www.mopartsracing.com

Top
#2562620 - 10/11/18 07:57 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: sasquatch]
Al_Alguire Offline


Registered: 01/20/03
Posts: 16871
Loc: Las Vegas
Well hurry up why don't ya grin Maybe I should be #7 too...hmmmm
_________________________

"I am not ashamed to confess I am ignorant of what I do not know."

"It's never wrong to do the right thing"

Top
#2562622 - 10/11/18 08:04 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
67mprfan Offline
super stock

Registered: 05/01/05
Posts: 871
Loc: ohio
Wish they were making wedges too
_________________________
71 demon stock stroke 440/indy ez-1 running 10.10 @ 132.14 mph in the 1/4 and 6.36 @ 107.46 mph in the 1/8 not in the same weekend but It did it then I sold it.
67 Belvedere a work in progress

Top
#2562628 - 10/11/18 08:12 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: 67mprfan]
Al_Alguire Offline


Registered: 01/20/03
Posts: 16871
Loc: Las Vegas
Originally Posted By 67mprfan
Wish they were making wedges too


They are its what I have on order
_________________________

"I am not ashamed to confess I am ignorant of what I do not know."

"It's never wrong to do the right thing"

Top
#2562783 - 10/12/18 07:02 AM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: copchaser]
RATTRAP Offline
pro stock

Registered: 03/28/05
Posts: 1416
Loc: N/E, Michigan
Originally Posted By copchaser
My block got shipped from California. Block number 426-555, Anyway, if I can get pics to load, I'll share some eye candy!



Ken put more blocks out than I thought after I finally got mine, Almost a 2 year ordeal, block# 426-495, The machining was poor, the bores were to be finished @ 4.500 ready to assemble. I had to have the bores fixed to square them up.(They never used deck plates)The water passages were filled with aluminum chips. Any one ordering a block in the future get the bores undersized and let a reputable machine shop do the finish work. IMO

Top
#2562792 - 10/12/18 07:47 AM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: copchaser]
MattW Offline
master

Registered: 06/02/05
Posts: 2652
Loc: Ontario Canada
Originally Posted By copchaser
My block got shipped from California. Block number 426-555, same block number that Ken Black gave me and sent me pictures of 2 years ago. Block has been checked out, and the machine work that old Ken did is fantastic! I'm still very confused about what's going on at Keith Black. In my nonprofessional white trash opinion, I don't think the powers at Keith Black know who's in charge. I truly do believe that the goat roper who works in the Taco Bell drive-thru could do a better good at figuring out what's going than the owners at KB. Anyway, if I can get pics to load, I'll share some eye candy!




LOl...

Top
#2562959 - 10/12/18 01:54 PM Re: Keith Black Blocks available from Ray Barton Racing Engines [Re: RBRE]
sasquatch Offline
top fuel

Registered: 03/26/05
Posts: 2296
Loc: North Carolina
When was this block received? Was it recently?
Todd
_________________________
www.mopartsracing.com

Top
Page 14 of 15 < 1 2 12 13 14 15 >

Advertisement
Forum Stats
25,581 Registered Members
32 Forums
194,879 Topics
2,276,697 Posts

Most users ever online: 1,424 @ 06/20/18 07:18 PM
Moparts Newest Topics
1969 Plymouth Road Runner
by tomsjack
11/17/18 02:46 AM
904 Rear servo spring.
by hysteric
11/17/18 12:20 AM
SST's Easy-To-Follow 5-Speed Swap Done With Hand Tools
by Rustymuscle
11/16/18 11:14 PM
AED carburetor users?
by PorkyPig
11/16/18 11:12 PM