Page 2 of 3 < 1 2 3 >
Topic Options
#2442852 - 01/29/18 10:39 AM Re: Dyno update after intake and collector change [Re: WHITEDART]
madscientist Offline


Registered: 09/17/14
Posts: 1825
Loc: Washington
I wasn't talking about the BLP stuff. This was a kit made by someone else that stopped pullover. There was a thread about this very thing on Speed Talk. I tried to search for it but found nothing. If you can find that thread on ST you will find a link to the company that makes the parts.
_________________________
Just because you think it won't make it true. Horsepower is KING. To dispute this is stupid. C. Alston

Top
#2442917 - 01/29/18 01:02 PM Re: Dyno update after intake and collector change [Re: madscientist]
WHITEDART Offline
top fuel

Registered: 10/06/11
Posts: 2154
Loc: bean town
I appreciate you taking the time to look for it.. I will take a look myself and see what I come up with
_________________________
In the 8s N/A.with Brett miller W8
5.42 1/8

Top
#2442931 - 01/29/18 01:36 PM Re: Dyno update after intake and collector change [Re: WHITEDART]
Thumperdart Offline


Registered: 07/12/04
Posts: 18440
Loc: State of confusion
Originally Posted By WHITEDART
I appreciate you taking the time to look for it.. I will take a look myself and see what I come up with



Are you going to Irwindale this Thursday............ beer
_________________________
72 Dart 470 n/a BB stroker street car `THUMPER`.....Check me out on FB for stories, videos and lots of carb pics..........760-900-3895........

Top
#2443001 - 01/29/18 03:52 PM Re: Dyno update after intake and collector change [Re: Thumperdart]
WHITEDART Offline
top fuel

Registered: 10/06/11
Posts: 2154
Loc: bean town
I will probably make a good spectator Thursday.. I should be getting the car out in the next two weeks
. If I can get everything sealed up
_________________________
In the 8s N/A.with Brett miller W8
5.42 1/8

Top
#2443019 - 01/29/18 04:29 PM Re: Dyno update after intake and collector change [Re: WHITEDART]
DavidDean Offline
pro stock

Registered: 03/28/03
Posts: 1498
Loc: Lubbock,TX
I dont know if its any help but the holley # is 121-237 for a .037 shooter

Top
#2443025 - 01/29/18 04:48 PM Re: Dyno update after intake and collector change [Re: DavidDean]
WHITEDART Offline
top fuel

Registered: 10/06/11
Posts: 2154
Loc: bean town
Thanks man
_________________________
In the 8s N/A.with Brett miller W8
5.42 1/8

Top
#2443049 - 01/29/18 05:35 PM Re: Dyno update after intake and collector change [Re: WHITEDART]
Thumperdart Offline


Registered: 07/12/04
Posts: 18440
Loc: State of confusion
Originally Posted By WHITEDART
I will probably make a good spectator Thursday.. I should be getting the car out in the next two weeks
. If I can get everything sealed up


Cool, well IF I make it come say hi and help me git this beouch to hook n book.............. laugh2
_________________________
72 Dart 470 n/a BB stroker street car `THUMPER`.....Check me out on FB for stories, videos and lots of carb pics..........760-900-3895........

Top
#2443069 - 01/29/18 06:15 PM Re: Dyno update after intake and collector change [Re: Thumperdart]
WHITEDART Offline
top fuel

Registered: 10/06/11
Posts: 2154
Loc: bean town
Will do
_________________________
In the 8s N/A.with Brett miller W8
5.42 1/8

Top
#2447070 - 02/05/18 06:31 PM Re: Dyno update after intake and collector change [Re: WHITEDART]
dogdays Offline
I Live Here

Registered: 01/20/03
Posts: 15950
Man, the word "prosody" didn't seem to compute with any automotive term, so I looked it up. Here is what I found: "the patterns of rhythm and sound used in poetry". So what did you mean? Did spell-check get you?

R.

Top
#2447196 - 02/05/18 09:34 PM Re: Dyno update after intake and collector change [Re: dogdays]
BradH Offline
I Live Here

Registered: 01/30/03
Posts: 13536
Loc: Valhalla... eventually
P O R O S I T Y, I'm going to guess...
_________________________
<Bleep> it! I broke my soap box... frown

Now I gotta find a hammer, some nails, and some wooden slats to fix it before I can spout off on here again. wink

Top
#2447395 - 02/06/18 12:07 PM Re: Dyno update after intake and collector change [Re: BradH]
WHITEDART Offline
top fuel

Registered: 10/06/11
Posts: 2154
Loc: bean town
I have to apologize for my poor spelling abilities.. basically what I was trying to say was the ritter block is having a hard time keeping the water and oil separate from one another.. however I flush the motor out put it in the car fired it up with the fresh load of block sealer.. and it seems to be holding again.. the plans are to get it out to our local test and tune on Thursday.. there's a potential for a new best but right now I think I would be happy if the water stays out of the oil
_________________________
In the 8s N/A.with Brett miller W8
5.42 1/8

Top
#2447406 - 02/06/18 12:28 PM Re: Dyno update after intake and collector change [Re: WHITEDART]
mr_340 Offline
master

Registered: 01/20/03
Posts: 3283
Loc: DFW
https://www.summitracing.com/int/search/department/air-fuel-delivery/section/carburetors-accessories/part-type/carburetor-discharge-nozzles/pump-discharge-nozzle-style/anti-pullover?N=4294951509%2B4294949628%2B4294921499%2B4294847871&SortBy=Default&SortOrder=Ascending&retaillocation=int
_________________________
Floyd Lippencott IV

Top
#2447618 - 02/06/18 06:00 PM Re: Dyno update after intake and collector change [Re: WHITEDART]
racerx Offline
master

Registered: 08/10/08
Posts: 2904
Loc: Mo.
Originally Posted By WHITEDART
I have to apologize for my poor spelling abilities.. basically what I was trying to say was the ritter block is having a hard time keeping the water and oil separate from one another.. however I flush the motor out put it in the car fired it up with the fresh load of block sealer.. and it seems to be holding again.. the plans are to get it out to our local test and tune on Thursday.. there's a potential for a new best but right now I think I would be happy if the water stays out of the oil

Please post the result.......been following this thread popcorn

Top
#2447657 - 02/06/18 06:43 PM Re: Dyno update after intake and collector change [Re: racerx]
WHITEDART Offline
top fuel

Registered: 10/06/11
Posts: 2154
Loc: bean town
Ok. Hopefully even get the GoPro on the helmet...
_________________________
In the 8s N/A.with Brett miller W8
5.42 1/8

Top
#2447667 - 02/06/18 06:51 PM Re: Dyno update after intake and collector change [Re: WHITEDART]
scottb Offline
pro stock

Registered: 02/26/05
Posts: 1328
Loc: New Smyrna Beach FL
Who cares about a few words misspelled I know my spelling is not always right

Top
#2447983 - 02/07/18 10:19 AM Re: Dyno update after intake and collector change [Re: WHITEDART]
Al_Alguire Offline


Registered: 01/20/03
Posts: 16555
Loc: Rockville MD & Las Vegas
Best of luck tonight..Hopefully the track is decent and you can learn something..
_________________________

"I am not ashamed to confess I am ignorant of what I do not know."

"It's never wrong to do the right thing"

Top
#2448032 - 02/07/18 12:16 PM Re: Dyno update after intake and collector change [Re: Al_Alguire]
dogdays Offline
I Live Here

Registered: 01/20/03
Posts: 15950
My question was an honest one and not intended to make the
OP feel bad. He has a Ritter block to do that!

It was not obvious to me that it was a misspelling of "porosity". I knew it to be a word with meaning far from the automotive world. It couldn't be that so maybe it's some kind of local or regional name for block sealer?

Anyway, OP, thanks for the clarification. No need to apologize.
To the group, he answered my question so let's move on.

Question: Is there ANYONE running a Ritter block without problems?

R.

Top
#2448277 - 02/07/18 09:16 PM Re: Dyno update after intake and collector change [Re: Al_Alguire]
WHITEDART Offline
top fuel

Registered: 10/06/11
Posts: 2154
Loc: bean town
Originally Posted By Al_Alguire
Best of luck tonight..Hopefully the track is decent and you can learn something..
I wish it was tonight. But unfortunately the test and tune is Thursday night.. I just completed the installation of the menscer shocks in the rear.. boy does the valving feel soft compared to the Vikings I just took off..


Edited by WHITEDART (02/07/18 09:16 PM)
_________________________
In the 8s N/A.with Brett miller W8
5.42 1/8

Top
#2448475 - 02/08/18 10:27 AM Re: Dyno update after intake and collector change [Re: WHITEDART]
Al_Alguire Offline


Registered: 01/20/03
Posts: 16555
Loc: Rockville MD & Las Vegas
Yeah I'm old and always forget Irwindale is Thursday night. Everyplace I have lived it was always Wednesday or Friday nights..Just cant seem to get that one right. As for the Menscer shocks they would be valved for the car they were built for.
_________________________

"I am not ashamed to confess I am ignorant of what I do not know."

"It's never wrong to do the right thing"

Top
#2448482 - 02/08/18 10:34 AM Re: Dyno update after intake and collector change [Re: WHITEDART]
340Cuda Offline
top fuel

Registered: 04/04/03
Posts: 1763
Loc: Tulsa, Oklahoma
A little of topic but I saw a post where someone had been by Ritter's and saw four "Version 2" blocks sitting on the floor marked as sold.

He did not have time to hang around and find out more about the "new" block.

Anyone else know anything?

Bill

Top
Page 2 of 3 < 1 2 3 >

Advertisement
Sponsored Link
Forum Stats
25,149 Registered Members
32 Forums
186,809 Topics
2,173,757 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Adjustable shocks?
by 451Mopar
25 minutes 50 seconds ago
Smoking left bank
by Dave Hall
Today at 01:12 AM
440 install with spool mounts
by 340clone
Today at 12:53 AM
Lowering blocks on '73-'74 B-Bodies
by 340clone
Today at 12:40 AM