Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: having a big problem need help! [Re: BigTerry] #2435282
01/15/18 11:03 PM
01/15/18 11:03 PM
Joined: Feb 2007
Posts: 612
Nampa, ID
None2Slow Offline
mopar
None2Slow  Offline
mopar

Joined: Feb 2007
Posts: 612
Nampa, ID
PB Blaster and a blue wrench, if you have the room. Otherwise smack it with a hammer a couple times.

Re: having a big problem need help! [Re: BigTerry] #2435336
01/16/18 12:24 AM
01/16/18 12:24 AM
Joined: Jan 2003
Posts: 13,544
md
M
mopars4ever Offline
I Live Here
mopars4ever  Offline
I Live Here
M

Joined: Jan 2003
Posts: 13,544
md
I changed the pump in my 06 2500. I dropped the tank. I used a couple floor jacks and lowered it enough to disconnect the lines and wires. Then dropped it the rest of the way. My sending unit was cracked at the top and was throwing evap codes. Also I replaced the locking ring as it was so rusty it was toast. Not a easy job but not the worst I ever tackled.

Re: having a big problem need help! [Re: larrymopar360] #2439682
01/23/18 07:02 PM
01/23/18 07:02 PM
Joined: Oct 2003
Posts: 3,688
Alexandria,La.
B
BigTerry Offline OP
master
BigTerry  Offline OP
master
B

Joined: Oct 2003
Posts: 3,688
Alexandria,La.
thinking about cutting a door in the bed to get to the pump...

Re: having a big problem need help! [Re: BigTerry] #2439695
01/23/18 07:30 PM
01/23/18 07:30 PM
Joined: May 2003
Posts: 3,020
N.W. Florida
F
Fat_Mike Offline
master
Fat_Mike  Offline
master
F

Joined: May 2003
Posts: 3,020
N.W. Florida
Originally Posted By BigTerry
thinking about cutting a door in the bed to get to the pump...


There's really no need to do that, Terry. It was tough to get the bolts out of the bed of my 2001 Ram too. But whichever way you decide to go, stick with it and tough it out...you'll get it one.

Re: having a big problem need help! [Re: BigTerry] #2439697
01/23/18 07:36 PM
01/23/18 07:36 PM
Joined: Jan 2003
Posts: 2,931
P
Paul_Fancsali Offline
master
Paul_Fancsali  Offline
master
P

Joined: Jan 2003
Posts: 2,931
-Use a brass drift don't go smacking things that can spark By the way just ran into a stupid issue like that on a 2009 Journey it was the battery being below 12 volts Replaced the wheel well battery On a lousy day outside and all bolts were naturally rusted / frozen I have few choice words for the genius who made that design Starter sounded like it wanted to go but could not just whirred

Re: having a big problem need help! [Re: Fat_Mike] #2440256
01/24/18 10:16 PM
01/24/18 10:16 PM
Joined: Oct 2003
Posts: 3,688
Alexandria,La.
B
BigTerry Offline OP
master
BigTerry  Offline OP
master
B

Joined: Oct 2003
Posts: 3,688
Alexandria,La.
if I had a air impac gun it wouldn't be a problem to lift the bed

Re: having a big problem need help! [Re: BigTerry] #2440320
01/25/18 12:18 AM
01/25/18 12:18 AM
Joined: May 2003
Posts: 3,020
N.W. Florida
F
Fat_Mike Offline
master
Fat_Mike  Offline
master
F

Joined: May 2003
Posts: 3,020
N.W. Florida
Is there enough room for a cheater bar on a 1/2" drive ratchet? What about a small ratchet strap on the end of the ratchet to get 'em broke loose? Let us know what you come up with...

Re: having a big problem need help! [Re: Fat_Mike] #2440514
01/25/18 01:10 PM
01/25/18 01:10 PM
Joined: Oct 2003
Posts: 3,688
Alexandria,La.
B
BigTerry Offline OP
master
BigTerry  Offline OP
master
B

Joined: Oct 2003
Posts: 3,688
Alexandria,La.
My father had a electric 1/2 dr impac gun i couldn't get them loose.. I spray the bolts with pb blaster.. I'm going to my friend shop this weekend if it don't rain he has air compressor. i got my finger cross if that don't work then we had to drop the tank. i really don't want to do that I'm not sure if he has a transmission jack.. I don't have the money to rent one either..

Re: having a big problem need help! [Re: BigTerry] #2446352
02/04/18 05:39 PM
02/04/18 05:39 PM
Joined: Oct 2003
Posts: 3,688
Alexandria,La.
B
BigTerry Offline OP
master
BigTerry  Offline OP
master
B

Joined: Oct 2003
Posts: 3,688
Alexandria,La.
I'm happy to say I got my truck going again! i want to thank my best friend for helping me!! I don't know what I would done without his help!!

Page 2 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1