Page 1 of 10 1 2 3 9 10 >
Topic Options
#2426422 - 12/31/17 01:48 PM A Body - Parts For Sale - 1st Quarter
moparts Offline


Registered: 01/19/03
Posts: 13924
Loc: Norwich CT USA
up

Top
#2426598 - 12/31/17 04:01 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
shorty Offline
member

Registered: 02/24/03
Posts: 92
Loc: Bristol, TN (ThunderValley USA...

1969 Dart Drivers Side NOS Fender. Still in black primer but weak for its age. Straight and crisp body lines as one would expect for NOS. Part number still on back side of fender.

Location : Bristol, TN

Price : $650 plus shipping

Contact : red_srt10 at (@) yahoo.com or PM on site.

Thanks for free ad!!


Attachments
100_0755.JPG



Top
#2426700 - 12/31/17 06:33 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
azmopars Offline
member

Registered: 09/24/04
Posts: 84
Loc: mohave county, AZ
We have dash pads and arm rest pads for 67-76 A bodies. No 68 dash pads at this time. These are not UR pads and are made on our own new tooling. Dash pads are $310 plus shipping. Send us your core first and avoid the core charge $40. These are new foam covered by new vinyl on original steel cores. AMERICAN MADE. Check out our new website. www.ABCMoparts.com 928-692-7689 or email ABCMoparts@frontier.com.


Attachments
a body 004 (1024x177).jpg

a body 006 (1024x173).jpg

73 76 Abody ARP 001 - Copy (2) (1024x996).jpg



Top
#2426729 - 12/31/17 07:09 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
6PAX Offline
master

Registered: 01/20/03
Posts: 4473
Loc: Metro Detroit
A-body chrome driver side remote sport mirror. $100

Map light fixture from a 70 Dart. $15

Nice chrome console automatic shifter knob. $20

Two frame strut rod shields. Both #4434. $5 each.

1973 A-body bench seat seat belt warning switch that mounts under the seat. $10

New chrome master cylinder cover. $8

Glove box door retaining cable. $10

68-69 Dart AC/radio bezel that has been cut for an aftermarket radio. $30

Heater box to dash support rod. $10

1968 Dart engine and forward light harness without leads for fender signals. $75

1968 Dart tail light harness. $40

1968 Dart engine and forward light harness. Has leads for fender signals. $100

Set of four window cranks from a 72 Dart. $35

Dart A-pillar vinyl top trim (small chrome where A-pillars meet the roof). $30

Deluxe black three spoke steering wheel from a 69 Dart. It will need repair as it has a few cracks. Has a nice center horn pad. $100

Gas tank straps and j-bolts from a 69 Dart. $25

Original driveshaft from a 69 Dart with a 225 and 904 trans. $40

7 1/4" rear end shock plates from 69 Dart. Sandblasted and painted. $50

Power steering pump with brackets from a Slant 6 69 Dart. $40

Slant 6 motor mounts and brackets from a 69 Dart. $20

Drum brake master cylinder from a 69 Dart. $20

69 Dart front bumper. Good for a driver or as a core for rechrome. $50 (Pick-up only)

Both sides vent window assemblies from a 69 Dart with tinted glass. $100 for the pair.

Ignition (no key), headlight and wiper switches from a 67 Barracuda. $35

1968 Dart wiper arms. $25

One pair 68-72 A-body rear armrest ash trays. $20

Original center armrest cover from 69 Barracuda bench seat. Not torn. $25

69 Dart Soff Seal paint gasket set. $25

Rear wire harness metal cover that is tacked to the floor along side the rear seat to cover the wiring. $5

A-body driver side remote control side view mirror (not sport style). $25

1969 Dart Swinger 3M white bumblebee stripe. $75

1969 Dart passenger side taillight bucket. $20

68 Dart dash harness. $75

69 Dart GT inner door emblem. $40

68-69 Dart radio bezel. $50

1969 Dart grill mounting brackets. $15

1969 Dart hood Dodge emblem. $30

1970 Dart rear interior side panel upper metal trim panels. $25/pair

New A-body package tray padding. $10

Nice knob style AM radio from a 70 Dart Swinger with knobs and bracket. $75

Ash tray from a 1970 Dart. $10

New in the box Hurst Pro Matic shifter. $225

A-body chrome passenger side sport mirror. $100

1 Pair of 69 Dart taillight lenses. $40

69 Dart dash harness for car with AC. $75

Four 1968 side marker lenses. Three amber, one red. $10 each

1970 Dart hood latch, catch and bolts. $25

Full circle chrome horn ring for 1966 type three spoke steering wheels. Some light pitting. $40 I will also throw in a 2nd ring that has some small nicks for no extra charge.

1968-69 style full circle chrome horn ring for three spoke steering wheels including horn cap. Some light pitting $45

1968 Dart GT bucket seats w/tracks. $500 (no shipping)

Nice black sunvisors from a 73 Duster. $40

Spare tire hold down bolt, nut and cup. $20

New stainless steel 2 1/2" exhaust tips and new exhaust tip hangers. These fit 68-69 Dart, 70-74 Duster, 71-72 Demon and 73-74 Dart Sport. $180

Seat belt retainer clips that mount on bottom of seats. 1 double clip and 3 singles in green $25. 1 double and 1 single in gold $15. 2 doubles and 1 single in dark blue $25.

Radio antenna from a Duster. $50

Driver side deluxe chrome remote mirror. Pretty nice chrome but glass is loose. $60

NOS A-body 4-speed floor hump part #2784440. $250

68 Dart GT trunk emblems. $30

A new pair of reproduction 1968 Dart taillight bezels. $160

68-69 floor shift steering column collars. $80

New reproduction black A/B-body bucket seat headrest set. $250

67-69 Dart lower windshield molding. No dents. $75

Hood catch from a 68 Dart hood. $20

70-76 A-body 904 column shift linkage. $75

A-body driver side fresh air vent box. $40

Pair of new reproduction chrome A/B-body L&R deluxe mirrors. $200

NOS Stant chrome gas cap. I believe this is for 72-up A-bodies as it has two sets of tabs on the back. $30

Pair of 68-69 Dart front bumper guards. $30

Two 318 driver side spool motor mounts pt#3642811. One is used and one is NOS. $20 for the used. $35 for the NOS.

68-69 A/B-body chrome bucket seat headrest bezels. Some pits. $15 for set of 4.

68-69 A/B-body black three spoke steering wheel. Pretty nice, no cracks. Comes with original brushed finish partial horn ring. I also am including a chrome full circle horn ring with it for free (has some pitting). $200

Chrome A/E-body map light switch bezel. $20

New Grant Tuff steering wheel with horn cap. $80

Prices do not include shipping. Email gt340 at yahoo.com


Edited by 6PAX (03/07/18 11:16 AM)

Top
#2426794 - 12/31/17 07:54 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
Goat330 Offline
enthusiast

Registered: 11/22/07
Posts: 362
Loc: Randolph, Ohio--N.E. Ohio
Audiovox cruise control CCS-100,SOLD, Bill at wmemore@aol.com or PM. Thanks for free ads Moparts!


Edited by Goat330 (02/27/18 12:01 PM)

Top
#2427078 - 01/01/18 11:30 AM A-BODY RALLY DASH W/TACH [Re: moparts]
gdmusclecar Offline
mopar

Registered: 10/31/04
Posts: 513
Loc: ORANGE PARK,FL
A-BODY RALLY DASH W/TACH *ALL GAUGES TESTED AND THEY WORK*

$599

***WE CAN SHIP***

E-MAIL:GDMUSCLECARPARTS@YAHOO.COM

SHOP # 904-272-1803

ORANGE PARK,FL.


Attachments
ABDASH.jpg

ABRALLYDASH2.jpg




Edited by gdmusclecar (01/01/18 11:33 AM)

Top
#2427124 - 01/01/18 12:08 PM White Bear Dodge [Re: gdmusclecar]
azmopar Offline


Registered: 01/20/03
Posts: 11829
Loc: NO RUST IN AZ!!!
had a few of these made up reproduction of the original. Trunk decal from White Bear Dodge Twin Cities Minnesota. very popular Performance dealer in the Midwest.

$8 ea plus shipping. will ship in a envelope with cardboard backing to ensure no damage.

Multiples available


Attachments
wbd.jpg


_________________________
70 Challenger Convertible 340 six pak CLONE?
70 Duster real FM3 car
65 Dart Charger FOR SALE


A Real man aint afraid to drive PINK!!!!

67 Plymouth Valiant PILOT CAR 273 Commando 4 spd


Top
#2427172 - 01/01/18 12:57 PM VARIOUS MOPAR PARTS [Re: moparts]
rayztoy Offline
super stock

Registered: 07/22/05
Posts: 1107
Loc: Richmond, VA
VARIOUS PARTS
2 OEM 3 Nipple breather $50.00 each
Repro Brake Booster Wiring Clip 1971-74 A & B-Body 1970-74 E-Body with nuts $25.00
ECS Engine Starting Instruction Card hangs on turnsignal 1970-1971 All Vehicles SOLD
DMT Manual Console Woodgrain overlay for 1970 E Bodies, 1970 ONLY Barracuda, Challenger (1971-74 models used the darker American Walnut color). This is made from 3M DiNoc. $25.00
Repro Owners Manual 1970 Barracuda $5.00
ECS Vacuum Advance Decal Green 4675 all SOLD
Gearbox Date Tag (10th day of 1970) $15.00
Transport Tie Down Bracket $20.00
Fuel Line Ground Strap $5.00
4 Speed Pedal Rod $20.00
Aluminum Heater Hose Strap, 3 available $5.00 each
Fine Lines Metal Rear Axle Brake Line 1972-76 A-Body, 1971-74 B-Body, 1970-74 E-Body $15.00
Repro Shaker drain hose w clamps SOLD
Cuda Challenger Shaker Support Feet: New reproduction shaker base plate to valve covers support feet. Semi-gloss black painted metal with black rubber coating on section that contacts the valve covers, includes the 2 bolts. $60.00
ECS Sunvisor Sleeve 1970-1971 All Vehicles SOLD
New Fuel Pump AFP 4845 NAPA Big Block High Performance w/ 3/8 SOLD
Aftermarket Sway bar brackets, poly bushing and mtg hardware $15.00
1970 Cuda rear bumper, good for driver or core $25.00 local pickup only
Mopar Super Stock Battery, can be used for shell for a replaceable small modern battery hidden inside, reduced to $35.00

Pics upon request, contact via PM or email zabinsky4@msn.com, Money Orders ONLY, buyer pays shipping
Thanks for the ad MOPARTS!

Top
#2427188 - 01/01/18 01:08 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dart4forte Offline
I Live Here

Registered: 01/31/03
Posts: 14140
Loc: Mesa, Arizona
******************************SOLD**************************

Hurst Competition Plus shifter with 67-72 A body stick. Includes rods.

$350 plus shipping


Attachments
4 speed stuff.jpg




Edited by dart4forte (01/02/18 03:34 PM)

Top
#2427193 - 01/01/18 01:11 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dart4forte Offline
I Live Here

Registered: 01/31/03
Posts: 14140
Loc: Mesa, Arizona
*******************SOLD******************************************Firm Feel greaseable lower control arm pins. Comes with poly bushings.

$80 plus $7.95 shipping


Attachments
LCA Pins.jpg




Edited by dart4forte (01/02/18 12:30 PM)

Top
#2427216 - 01/01/18 01:31 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dart4forte Offline
I Live Here

Registered: 01/31/03
Posts: 14140
Loc: Mesa, Arizona
Restored 1964 - 1972 A Body seat belt set, new webbing, all hardware restored, all necessary hardware to completely install your seat belts. Date tags and NOS webbing is available at an additional charge.

$350 for a basic set. A basic set consists of belts for bucket seats or bench, shoulder belts, rear bench. A third lap belt set or shoulder belts for the rear bench is available for an extra charge. Hardware such as bolts, mounting plates, date tags etc. are extra. A basic set will have some flaws in the hardware. No core charge is required.

$550 for a show quality set. This set includes everything needed to install in your car. It will include all necessary belts, hardware and date tags. A $150 core charge is required. If you have a core set it must be complete with no substitute with other models and totally free of pits in the chrome and corrosion. Core sets must include bolts. Condition of the webbing is not an issue

Picture depicts a complete 68-69 Seat Belt set and webbing sample. Includes shipping.

I may be contacted at dartzpartz@hotmail.com or by txt at 509-961-1306.

Mesa, AZ



Attachments
69ABodySeatBelts.jpg




Edited by dart4forte (01/01/18 01:32 PM)

Top
#2427349 - 01/01/18 04:40 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1190
Loc: CT
What we have here is a brand new reproduction voltage regulator for a 1962-1969 Dodge Plymouth or Chrysler vehicle. This regulator looks almost exactly like what the originals look like from the outside, it even has the IGN and FLD stamped into the cover, but hidden inside is a small circuit board with diodes, transistors, and other electronic components. This voltage regulator is completely electronic. No more points that cause voltage fluctuations. Now you can have the best of both worlds, a voltage regulator that looks stock but is all electronic inside. This is a bolt on upgrade, no modifications are necessary. Bolt it on and plug in your factory wiring, its that simple. The cost for these is $28.00 each with free shipping anywhere in the continental US.

If you have any questions you can email me at mrrandyj@aol.com


Attachments
top.jpg



Top
#2427376 - 01/01/18 05:30 PM 67 Valiant grille emblem [Re: mrrandyj]
azmopar Offline


Registered: 01/20/03
Posts: 11829
Loc: NO RUST IN AZ!!!
one year only emblem nice shape has some small(very small) peppering not pitted $40 plus the shipping from 85338

azmopar@aol.com


Attachments
valiantemblem.jpg


_________________________
70 Challenger Convertible 340 six pak CLONE?
70 Duster real FM3 car
65 Dart Charger FOR SALE


A Real man aint afraid to drive PINK!!!!

67 Plymouth Valiant PILOT CAR 273 Commando 4 spd


Top
#2427378 - 01/01/18 05:33 PM brake block /manifold valve [Re: azmopar]
azmopar Offline


Registered: 01/20/03
Posts: 11829
Loc: NO RUST IN AZ!!!
dated 158 1 in nice shape no bad spots $40 plus shipping of $8 in a priority mail small box in the lower 48

probably correct for a late 71 early 72 car


Attachments
brake valve1.jpg

brake valve2.jpg




Edited by azmopar (01/01/18 05:34 PM)
_________________________
70 Challenger Convertible 340 six pak CLONE?
70 Duster real FM3 car
65 Dart Charger FOR SALE


A Real man aint afraid to drive PINK!!!!

67 Plymouth Valiant PILOT CAR 273 Commando 4 spd


Top
#2427624 - 01/02/18 07:10 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
small block beep Offline
member

Registered: 11/15/06
Posts: 191
Loc: citrus co. fl.
early A body four speed stuff
Floor hump nice cond. SOLD
shifter with handle $160
plus the ride.


Attachments
20170613_085425.jpg

thumbnail_20160817_172818.jpg




Edited by small block beep (01/09/18 05:57 PM)
_________________________
stick shift Mopars

Top
#2427789 - 01/02/18 12:59 PM 70-71 DUSTER REAR SIDE MARKERS $10 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
GOOD CLEAN SHAPE FOR DRIVER OR BETTER $10PR,CALLS ONLY 603 209 1678,POSTAL MONEY ORDERS ONLY


Attachments
DSC01271.JPG




Edited by littleredcoffin (01/09/18 10:36 AM)

Top
#2427795 - 01/02/18 01:04 PM 318 HEAT STOVE PIPE CLEAN [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
FITS A 318 DRIVERS HEAT STOVE TIN,NOT RUSTY.$12.. CALL ONLY 603 209 1678.MONEY ORDERS ONLY


Attachments
DSC01238.JPG



Top
#2427799 - 01/02/18 01:12 PM VERY CLEAN ASHTRAY $10 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
very clean ashtray!!! $10,picture speaks for itself..calls onlt 603 209 1678,POSTAL MONEY ORDERS ONLY


Attachments
DSC01239.JPG

DSC01240.JPG




Edited by littleredcoffin (01/09/18 10:39 AM)

Top
#2427801 - 01/02/18 01:13 PM 69 DART FRONT PARKING LIGHTS $15pr [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
69 DART FRONT GRILLE PARKING LIGHTS.MATCHED PAIR,CLEAN PIECES.$15PR,CALLS ONLY 603 209 1678,POSTAL MONEY ORDERS ONLY


Attachments
DSC01242.JPG




Edited by littleredcoffin (01/09/18 10:38 AM)

Top
#2427803 - 01/02/18 01:15 PM FRONT STRUT ROD PLASTIC COVERS $5 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
MATCHED OFF MY 340 DUSTER,$5PR,CALLS ONLY 603 209 1678,PAYMENT BY MONEY US POSTAL ORDER ONLY


Attachments
DSC01243.JPG




Edited by littleredcoffin (01/09/18 10:38 AM)

Top
#2427805 - 01/02/18 01:16 PM "DUSTER" DOOR PLAQUES $5 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
DUSTER DOOR PLAQUES...CLEAN.$5PR,CALLS ONLY 603 209 1678.PAY BY US POSTAL MONEY ORDERS ONLY


Attachments
DSC01249.JPG




Edited by littleredcoffin (01/09/18 10:39 AM)

Top
#2427824 - 01/02/18 01:45 PM Re: 72-76 Duster front side marker light [Re: moparts]
PHYSIXX Offline
pro stock

Registered: 04/07/04
Posts: 1547
Loc: Edison, New Jersey
I have for sale a decent front side marker light assembly for the 72 and up A-body cars. It’s not cracked and includes the speed nuts to attach it to the fender. I would like to get $5 plus the shipping.

Edison, NJ
rider1454 at aol.com


Attachments
DSCN3985.JPG

DSCN3987.JPG




Edited by PHYSIXX (01/02/18 06:51 PM)

Top
#2427827 - 01/02/18 01:48 PM Re: 67 Dart front turn signal/parking light lens & housing [Re: PHYSIXX]
PHYSIXX Offline
pro stock

Registered: 04/07/04
Posts: 1547
Loc: Edison, New Jersey
I have for sale a decent turn signal/parking light lens and housing for the left side of the grill of a 1967 Dart. The housing is in decent shape and the lens is good with just a couple of small surface cracks in the plastic. I would like to get $10 for both lens and housing plus the shipping.

Edison, NJ
rider1454 at aol.com


Attachments
DSCN4046.JPG

DSCN4049.JPG




Edited by PHYSIXX (01/02/18 06:46 PM)

Top
#2427959 - 01/02/18 05:58 PM For Sale: 1969 Dart RH Fender [Re: moparts]
vinnyd76 Offline
super stock

Registered: 04/25/12
Posts: 856
Loc: Macomb, MI
SOLD


For sale is an original 1969 Dart RH fender. The fender is solid with no soft spots.

Location: Metro Detroit

Price: $260


Attachments
RH fender overall - outside view.JPG

RH fender overall - inside view.JPG

RH Fender inside view with undercoating.JPG




Edited by vinnyd76 (01/13/18 02:58 PM)

Top
#2427962 - 01/02/18 06:05 PM For sale: 1971 and up Duster Stripe [Re: moparts]
vinnyd76 Offline
super stock

Registered: 04/25/12
Posts: 856
Loc: Macomb, MI
For sale is a Duster stripe kit for a 1971 Duster and up. This stripe kit is for both sides of the car from the fenders to the rear quarters.

Location: Metro Detroit

Price: $50 obo


Attachments
098.JPG



Top
#2427972 - 01/02/18 06:27 PM For Sale: Pair of Original A-Body Fuel Tank Straps [Re: moparts]
vinnyd76 Offline
super stock

Registered: 04/25/12
Posts: 856
Loc: Macomb, MI
For Sale: Pair of original A-Body fuel tank straps (I have three straps, so will sell a single, if someone needs it).


Location: Metro Detroit

Price: $40 obo


Attachments
Fuel Tank Straps_1of2.JPG

Fuel Tank Straps_2of2.JPG




Edited by vinnyd76 (03/25/18 09:06 AM)

Top
#2427999 - 01/02/18 07:05 PM For Sale: 1970-72 Duster Standard Grille Stainless Moldings [Re: moparts]
vinnyd76 Offline
super stock

Registered: 04/25/12
Posts: 856
Loc: Macomb, MI
For sale: Pair of original stainless moldings that are installed in the center (top and bottom) of a standard grille on a 1970 -1972 Duster. These moldings are not reproduced.

Location: Metro Detroit

Price: $80 obo


Attachments
Standard Duster Grill Moldings.JPG

1970 Duster Stainless Moldings.JPG




Edited by vinnyd76 (01/02/18 07:14 PM)

Top
#2428478 - 01/03/18 06:09 PM 73 up disc brake prop vlave [Re: moparts]
azmopar Offline


Registered: 01/20/03
Posts: 11829
Loc: NO RUST IN AZ!!!
its in nice shape dated 103 3 103rd day of 73 for a disc brake car $75 plus shipping should fit in a small priority mail box $8 to ship in the lower 48

azmopar@aol.com


Attachments
73-2brake.jpg

73brake.jpg


_________________________
70 Challenger Convertible 340 six pak CLONE?
70 Duster real FM3 car
65 Dart Charger FOR SALE


A Real man aint afraid to drive PINK!!!!

67 Plymouth Valiant PILOT CAR 273 Commando 4 spd


Top
#2428626 - 01/03/18 09:28 PM Re: 73 up disc brake prop vlave [Re: azmopar]
bremotorsports Offline
top fuel

Registered: 08/22/03
Posts: 2048
Loc: New Jersey Bada Bing
2875782 Dual Point Distributor

IBS-4015B

Early date code 278

Very nice used condition!!!

Original application 69 340 manual transmission. Can be used in any small block of course.

195.00 plus shipping.

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net

PayPal preferred.


Attachments
123117 00012.JPG


_________________________

Top
#2429026 - 01/04/18 03:41 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE

4-speed tunnel hump closeout sale!!
Limited quantities remaining!
We’re going to stop carrying these,
So We’re Offering Them For Blowout Prices And Once They’re Gone, They’re Gone!
So don’t wait

67-up A-body $130,
E-body $130,
62-65 B-body sold out
66-70 B-Body $130,
71-74 B-Body With Console $130

302-398-0821

TONYSPARTS.COM

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429045 - 01/04/18 03:50 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
New Product!

Door Jamb Receiver Kits.


These Are Commonly Missing Or Corroded.

Each Kit Comes With a Pair of Receivers, Mounting Screws and 4 Shims

Fits Bodies: 64-66 A-Bodies, 64-70 B-Bodies, 65-68 C-Bodies + Imperial And 67-71 Trucks.

These Are Now In Stock And Available From Tony’s Parts for $65 Per Kit

TONYSPARTS.COM
Please email through website

302-398-0821

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429051 - 01/04/18 03:54 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
New Products from Tony’s Parts

All New Lower Vent Post Alignment Brackets + Studs.


They fit 68-70 B-Body And 67-72 A-Body

These Attach To The Lower Leg Of The Vent Window Post And Are Used To Align The Vent Window Assembly,
And The Stud Kit Attaches To The Door And Fits Into The Alignment Bracket

These Are Commonly Broken Off And Missing Making Proper Vent Window Frame Alignment Impossible.
Mounting Hardware Is Included Too.

Showing Bracket Installed on Vent Post


These Compliment Our Already Available 68-70 B-Body Chrome Vent Window Frame Kits.

Vent Post Brackets $45pr
Lower Alignment Studs $19pr

TONYSPARTS.COM
Please email through website

302-398-0821

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429062 - 01/04/18 04:01 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
New Product

1968 – 1969 Floorshift Steering Column Collars



Whether It’s 4-Speed Or An Automatic Everyone Wants To Have A Car With A Floorshifter.

One Of The Items Needed For A Floorshift Conversion Is A Floorshift Steering Column, Those Are Getting Very Difficult And Expensive To Find. So We Have Just Released The Steering Column Collars To Convert A Column Shift Steering Column To A Floorshift Column.

These Fit All 68-69 B-Body, A-Body And C-Body Columns Without Tilt/Telescopic

They Are In Stock And Ready To Ship For $125pr

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429066 - 01/04/18 04:01 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
New Product
1970 And 1971-1976 Floorshift Steering Column Collar Sets

1970


1971 + newer


Whether It’s 4-Speed Or An Automatic Everyone Wants To Have A Car With A Floorshifter.

One Of The Items Needed For A Floorshift Conversion Is A Floorshift Steering Column, Those Are Getting Very Difficult And Expensive To Find. So We Have Just Released These 3-Piece Steering Column Collars For Converting A Column Shift Steering Column To A Floorshift Steering Column.

We Made The 1970 And The 1971-1979 Versions That Fit All A,B,C,E Body Columns Without Tilt/Telescopic

They Are In Stock And Ready To Ship For $160 Set

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429071 - 01/04/18 04:04 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
A NEW PRODUCT!!

66-70 Chrome Seat Adjuster Knobs,


There Were Used On Bucket And Bench Seat Applications For All Body Styles,
They Are Typically Worn Or Missing And Haven’t Been Available For A Very Long Time
These Are A High Visibilty Part That Is In Your Face, Nothing Worse Then Old Pitted Chrome Staring You Right In The Eye When You Open The Door

They Are In Stock And Ready To Ship

Price is $40pr

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429075 - 01/04/18 04:05 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
! All New Part.

Lower Rod For Automatic Floor Shift Linkage For A,B,C and E-body Cars.
(Slight Modification Needed For Use On 1970 E-body With Column Lockout Linkage)

This Rod Is Almost Always Missing And Is Needed For Completing Your Automatic Floor Shift Linkage Set $45.

These Are In Stock And Ready To Ship

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429103 - 01/04/18 04:12 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
A NEW PRODUCT!!
Plastic Interior A-pillar Trims For 67-72 Dart Hardtop And 67-69 Barracuda .



Will Work On Convertibles If The Tops Are Trimmed Off

These Are Injection Molded As Original And Have The Correct Finish, They Fit And Look As Originals.

Available For $150pr

In Stock And Ready To Ship

tonysparts.com
Please Email Through Website

302-398-0821

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429104 - 01/04/18 04:13 PM BIG BLOCK FUEL PUMP [Re: moparts]
rayztoy Offline
super stock

Registered: 07/22/05
Posts: 1107
Loc: Richmond, VA
New Fuel Pump AFP 4845 NAPA Big Block High Performance w/ 3/8 (383,440)

Buyer pays shipping, Cash or USPS Money Order ONLY, reduced to $25.00

Pics at:
https://richmond.craigslist.org/pts/d/mopar-big-block-fuel-pump/6446824734.html
Thanks for the ad Moparts!

Top
#2429108 - 01/04/18 04:13 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
A NEW PRODUCT!!

1966-1969 Chrome Valve Cover Breathers, Used On High Performance Engines, Chromed + Lettered As Original $55
NEW LOWER PRICE!!


302-398-0821

tonysparts.com

Tony’s Parts

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429115 - 01/04/18 04:15 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
A NEW PRODUCT!!

1967 and newer thermostat housings


These are commonly missing or oxidized so badly that they wont even seal much less look good.
So we reproduced them just like the originals including the numbers on them.
We even went ahead and made 2 versions of them, the standard version that parting line is more smooth and the concours version that has a more pronounced parting line. Available for $40 and $45

In Stock + Ready To Ship

302-398-0821

TONYSPARTS.COM

Tony’s Parts
Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429124 - 01/04/18 04:17 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
A NEW PRODUCT!!

Clip Set For 68-69 A+B-Body Bucket Seat Hardback Panels.


Many Times The 68-69 A Or B Bodies (Charger, Coronet, Road Runner, GTX, Satellite, Barracuda And Dart) Are Either Missing Their Bucket Seat Hardback Panel With Clips Or They Are Beyond Repair.

While The Bare Hardback Panels Have Been Available, The Clip Set Hasn’t.
Since We Deal In A Lot Of Bucket Seats And Found That Many Were Missing The Backs We Saw A Need For The Clip Set. The Clip Set Makes The Hardback Panels Easy To Install To The Seats Just Like The Originals.

We Offer A 6 Piece Clip Set (4 Upper Clips And 2 Lower Edge Clips) To Complete A Seat Back Panel For 1 Seat. They Are Die Stamped And Have All Of The Same Bends As The Originals.

The Original Clips Were Secured To The Seat Back Panel From The Factory With An Industrial Strength Staple Gun, We Have Included An Easy To Use Rivet Set For Ease Of Installation. If You Need For Both Seats Then 2 Clip Sets Are Required.

Now In Stock For $25 per seat kit

Available Through
Tony’s Parts
302-398-0821
tonysparts.com
Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429127 - 01/04/18 04:18 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
A NEW PRODUCT!!

Dash Mounted 4-Speed Reverse Light



Used on 68-Newer 4-Speed Cars
$75 NEW LOWER PRICE!

302-398-0821

TONYSPARTS.COM

Tony’s Parts

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429133 - 01/04/18 04:18 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
A NEW PRODUCT!!
New Reproduction Console And Glovebox Door Locks,

These New Locks Work Smooth And Fit Just Like The Originals, Replace That Worn, Broken Or Missing Lock With A Nice New One.


They Fit:
64-74 B-body & 70-74 E-body Console Lids,
69-76 A-body Console Lids (must Remove Bezel),
62-69 B-body Glovebox Doors &
68-69 A-body Glovebox Doors.

Available For $40,

tonysparts.com

302-398-0821,

Tonys Parts
Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2429203 - 01/04/18 07:29 PM 71 demon/duster radiator [Re: TONY_DAGOSTINO]
jtgts Offline
member

Registered: 08/04/07
Posts: 196
Loc: iowa
i have a factory radiator for a 1971 demon/71 duster 340 auto with heavy duty cooling has the original fan shroud and drain tube,one tube has a small hole so that would need fixed,its 22" wide and is for auto or manual trans,a/c and heater with N45 and N51 option (N51 is maximum cooling) factory part # is #3443977 contact me here or jtgts56@gmail.com 250 plus shipping, or can call 563 579 1100 thanks jt


Attachments
20171230_203553.jpg



Top
#2429645 - 01/05/18 07:00 PM Re: 71 demon/duster radiator [Re: jtgts]
bremotorsports Offline
top fuel

Registered: 08/22/03
Posts: 2048
Loc: New Jersey Bada Bing
6138 Thermoquad Carb (Original application is very late 71 or all of 72 model year 340 with Manual Trans)

Can of course be used for any desired application!

Nice original piece.

200.00 plus shipping.

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net

PayPal preferred.


Attachments
092917 00021.JPG

092917 00022.JPG


_________________________

Top
#2429649 - 01/05/18 07:09 PM Re: 71 demon/duster radiator [Re: bremotorsports]
bremotorsports Offline
top fuel

Registered: 08/22/03
Posts: 2048
Loc: New Jersey Bada Bing
N-9Y Champion Spark Plugs for your 68-73 340 Mopar

40.00 plus shipping. Last set available!

Bill Rolik

201-394-5533 Cellular

bremotorsports@verizon.net

PayPal preferred.


Attachments
102217 00001.JPG


_________________________

Top
#2430072 - 01/06/18 03:11 PM New 67-72 A-Body Sway Bar Mount Straps [Re: moparts]
cbusters Offline
mopar

Registered: 05/08/05
Posts: 656
Loc: Florida
Limited Repop run of 67-72 A-Body Sway Bar Mount Straps. These were the victim of 40 years worth of curb grinds and not serviced by Mopar. Made by Americans in America from correct gauge metal, width and contour from dies on punch presses. Shipping included via USPS in mainland US. Sold in pairs for $44, just trim and weld on. Want them fast? Ask me how!


Attachments
IMG_0502.JPG



Top
#2430179 - 01/06/18 06:21 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
mike337 Offline
pro stock

Registered: 04/17/03
Posts: 1249
Loc: Cannelton, IN
Carter carburetor from 67 Formula S with 383 engine/auto trans. Stampings include: A7 4299S, 0-1431, and 7-287. $125 Can be reached at moparzone4@aol.com

Thanks for the ad Moparts


Attachments
Carb 6.JPG



Top
#2430549 - 01/07/18 12:50 PM REPRODUCTION VIN TAG RIVETS [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
THESE ARE REPRODUCTIONS.I DO NOT SELL FACTORY RIVETS!!!! CORRECT 6 SIDED ROSETTE STEEL RIVETS.HOLDS TAG TO DASH FRAME OR DRIVERS DOOR PILLAR OF ALL MOPAR CARS AND TRUCKS.$65PR,,SAY YOU SAY THE AD ON MOPARTS...SHIPPING IS FREE.CALLS ONLY 603 209 1678.NO EMAILS..


Attachments
DSC01142.JPG



Top
#2431094 - 01/08/18 12:30 PM HEADLIGHT BUCKETS [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
CAME OFF A DUSTER.JUST THE BUCKETS AND STAINLESS RINGS... $10PR,CALLS ONLY 603 209 1678,PAYMENT BY US POSTAL MONEY ORDER ONLY ...NO EMAILING..ONLY CALLS


Attachments
DSC01257.JPG



Top
#2431100 - 01/08/18 12:34 PM 150 mph speedometer [Re: littleredcoffin]
sergio Offline
member

Registered: 08/24/16
Posts: 13
Loc: ca
Very good condition,odometer reset works fine, numbers on back are. 532-n, 2927719, 292-0. Email for pictures at sergio7140@att.net. $150 shipped in usa

Top
#2431284 - 01/08/18 06:51 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
340man Offline
member

Registered: 10/22/03
Posts: 136
Loc: Seattle/Tacoma ,Wa.
340 Six-Pac set up for sale, complete with carbs, intake, fuel line, air cleaner, linkage for carbs.... 2550.00 e-mail for pics or any questions to: s340man@msn.com or text 360 471-9999 Thanks for looking..

Top
#2431573 - 01/09/18 10:43 AM SINGLE NIPPLE AIR BREATHER [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
air breather OFF MY DUSTER,GOOD SHAPE $7,CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDERS ONLY.


Attachments
DSC01273.JPG



Top
#2431576 - 01/09/18 10:45 AM CONSOLE WIREING HARNESS $8 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
CONSOLE WIRE HARNESS,GOOD SHAPE $8,CONVERTING TO FLOOR SHIFT??? YOU NEED THIS..CALLS ONLY 603 209 1678.NO EMAILS.PAYMENT BY US POSTAL MONEY ORDERS ONLY.


Attachments
DSC01277.JPG



Top
#2431577 - 01/09/18 10:47 AM ROUND BLACK HORN PAD $6 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
BLACK ROUND HORN PAD .GOOD CONDITION $6.CALLS ONLY 603 209 1678.NO EMAILS...PAYMENT BY US POSTAL MONEY ORDERS ONLY


Attachments
DSC01276.JPG



Top
#2431586 - 01/09/18 10:59 AM 68-69 DART RADIO/HEATER CONTROL BEZEL $20 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
68 DART HEATER/RADIO BEZEL.NON A/C.NOT CUT!! $20,CALLS ONLY 603 209 1678.NO EAMILS.PAYMENT BY US POSTAL MONEY ORDERS ONLY..IM RON JOHNSON AND I SELL MY PARTS FOR LESS EVERY DAY OF THE YEAR!


Attachments
DSC01080.JPG




Edited by littleredcoffin (01/09/18 11:52 AM)

Top
#2431629 - 01/09/18 11:54 AM 70-72 DUSTER HOOD LATCH RELEASE LEVER $5 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
DUSTER 70-72 HOOD LATCH RELEASE LEVER..WORKS FINE $5,CALLS ONLY 603 209 1678.NO EMILS..PAYMENT BY US POSTAL MONEY ORDERS ONLY


Attachments
DSC01079.JPG



Top
#2432272 - 01/10/18 01:15 PM 63-66 DART VALIANT CONVERTIBLE WINDSHIELD STAINLESS TRIM [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
ALL 4 ARE A MATCHED SET.VERY STRAIGHT FOR THE AGE...NO EXTRA SCREW HOLES.$50 FOR THE SET OF 4...CALLS ONLY 603 209 1678.NO EMAILS.PAYMENT BY US POSTAL MONEY ORDER ONLY


Attachments
DSC01303.JPG

DSC01304.JPG

DSC01305.JPG



Top
#2432275 - 01/10/18 01:19 PM 63-66 DART VALINT GAS TANK FILLER NECK CLEAN [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
63-66 DART VALIANTGAS TANK FILLER NECK,CLEAN NOT RUSTED OUT $15,CALLS ONLY 603 209 1678,NO EMAILS...PAYMENT BY US POSTAL MONEY ORDERS


Attachments
DSC01307.JPG

DSC01309.JPG

DSC01310.JPG



Top
#2432279 - 01/10/18 01:22 PM 66 DART BLACK DASH PAD [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
66 DART BLACK DASH PAD.HAS NO CRACKS.BUT HAS A FEW DENTS/CREASES.$40,CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDER ONLY..NO EMAILS


Attachments
DSC01312.JPG

DSC01313.JPG

DSC01315.JPG



Top
#2432284 - 01/10/18 01:31 PM REDUCED 1966 DART GT FENDER MOLDING NICE SHAPER $10 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
DART GT DRIVERS SIDE FENFER MOLDING...CLEAN,MUCH ABOVE AVERAGE CHROME..$10,CALLS ONLY 603 209 1678,NO EMAILS...PAY BY US POSTAL MONEY ORDER ONLY


Attachments
DSC01291.JPG

DSC01292.JPG




Edited by littleredcoffin (01/11/18 01:57 PM)

Top
#2432300 - 01/10/18 01:46 PM 63-66 CLUTCH PEDAL ASSEMBLY [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
CLUTCH PEDAL ASSEMBLY FOR 63-66 DART VALIANT CUDA.CORRECT AND IN GOOD SHAPE $40,CALLS ONLY 603 209 1678,PAY BY US POSTAL MONEY ORDERS ONLY

Top
#2432729 - 01/11/18 07:10 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
mike337 Offline
pro stock

Registered: 04/17/03
Posts: 1249
Loc: Cannelton, IN
Carter carburetor from 67 Formula S with 383 engine/auto trans. Stampings include: A7 4299S, 0-1431, and 7-287. $125 Can be reached at moparzone4@aol.com

Thanks for the ad Moparts


Attachments
Carb 6.JPG



Top
#2432799 - 01/11/18 11:23 AM Factory sunroof [Re: moparts]
71duster414 Offline


Registered: 08/18/14
Posts: 507
Loc: Wisconsin
Here is a factory roof and insert for a duster or dart sport. Comes with black pan as well.

$350 obo


Attachments
20170404_173528-1512x2016.jpg

20170404_174004-2016x1512.jpg


_________________________
hoffmanhhr@gmail.com

Top
#2432886 - 01/11/18 02:02 PM HEAVY DUTY CLEAN PAIR OF COIL SPRING REAR SHOCKS [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
THESE ARE IN GOOD SHAPE.......THREADS ARE GOOD,CAME OFF A 8.75 REAREND CAR I PARTED OUT.YES THEY ARE USED,BUT YOU CANT FIND ANYBODY WHO STILL MAKES THEM,AND THEY ARE A GOOD SHAPE.THIS IS A LOW DOLLAR WAY TO RAISE THE BACK END OF THE CAR UP AT LEAST 1-1.25 INCHES..SO IF YOU HAVE A SET OF SPRINGS THAT ARE JUST A LITTLE BIT TIRED.THESE WILL FILL THE BILL YOU NEED..$25PR,CALLS ONLY 603 209 1678,NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY


Attachments
DSC01378.JPG



Top
#2433024 - 01/11/18 06:09 PM Re: HEAVY DUTY CLEAN PAIR OF COIL SPRING REAR SHOCKS [Re: moparts]
azvcmc69 Offline
enthusiast

Registered: 03/16/10
Posts: 296
Loc: Arizona
1968 VALIANT PARTS

Left & Right Grill with matching headlight bezels:
EXCELLENT CONDITION
$100.00 all 4 pieces plus shipping.

Left & right Taillight assemblies (housings/lenses)
EXCELLENT CONDITION
$100.00/pair plus shipping

Aluminum Trunk lid panel
EXC. Condition: $50.00 plus shipping.

Valiant Signet fender emblems:
EXCELLENT CONDITION
$25.00 each plus shipping

Correct V-Eight fender emblems
$10.00 each plus mailing.

ALL ARIZONA RUST FREE / PIT FREE CHROME / ALUMINUM

azvcmc69@gmail.com for pictures

Top
#2433026 - 01/11/18 06:11 PM Re: HEAVY DUTY CLEAN PAIR OF COIL SPRING REAR SHOCKS [Re: moparts]
azvcmc69 Offline
enthusiast

Registered: 03/16/10
Posts: 296
Loc: Arizona
1967 DART

I have (1) one correct 273 4barrel fender emblem.

$25.00 plus mailing

azvcmc69@gmail.com for pictures

67Dart Rear bumper core: Needs re-chroming...but not rusty
$75.00 plus shipping

Top
#2433038 - 01/11/18 06:25 PM Re: HEAVY DUTY CLEAN PAIR OF COIL SPRING REAR SHOCKS [Re: moparts]
azvcmc69 Offline
enthusiast

Registered: 03/16/10
Posts: 296
Loc: Arizona
1969 Dart
Front & rear bumper brackets
$100.00 for all 4 plus shipping

Transmission crossmember : $25.00 plus shipping

azvcmc69@gmail.com for pictures

Top
#2433591 - 01/12/18 06:07 PM A-body parts [Re: moparts]
JRepucci Offline
master

Registered: 01/20/03
Posts: 2650
Loc: Sacramento,California
NOS A-body 67-71 disc brake master cylinder, cast#2225641, correct for all factory Kelsey Hayes Disc Brake cars, 340, 383, 440, and HEMI $300


Attachments
2225411 1.jpg




Edited by JRepucci (02/02/18 11:03 AM)

Top
#2433984 - 01/13/18 02:34 PM 69 Dart Trunk Lid [Re: moparts]
alrrbeepbeep Offline
member

Registered: 09/01/03
Posts: 36
Loc: New Jersey
Good Condition

$100

Al - 201-446-7362


Attachments
IMG_0697.JPG



Top
#2434005 - 01/13/18 03:14 PM M CODE 440 cuda dart dr MOTOR MOUNT ASSY ..ORIGINAL! [Re: alrrbeepbeep]
ph23vo Offline


Registered: 01/21/03
Posts: 13040
Loc: renton, Washington
M CODE 440 cuda dart assy..only one AVAILABLE ON THE PLANET..1299.00 OBRO ph23vo@juno.com


Attachments
001.JPG

002.JPG

003.JPG

004.JPG



Top
#2434125 - 01/13/18 06:56 PM Re: 68 Dart OEM auto trans console brackets [Re: moparts]
PHYSIXX Offline
pro stock

Registered: 04/07/04
Posts: 1547
Loc: Edison, New Jersey
SOLD!

I have for sale a set of automatic trans, OEM console brackets that came from a 1968 Dart GTS. They were cut out neatly and are in excellent shape. Also included with these brackets is the factory boot and bezel that goes on the floor tunnel for the shifter rod to pass through. I would like to get $60 plus shipping for the set of 4 pieces.

Edison, NJ
rider1454 at aol.com


Attachments
DSCN4459.JPG




Edited by PHYSIXX (01/18/18 12:22 PM)

Top
#2434598 - 01/14/18 05:10 PM New Old Stock 70-2 Duster/Valiant grille emblem [Re: moparts]
QuickBpBp Offline
master

Registered: 07/06/03
Posts: 5871
Loc: SE PA.
NOS 1970-2 Plymouth Duster/Valiant Standard Grille emblem. This is in excellent condition. Very hard to find used, let alone an NOS one. A very nice detail item. If you are doing a serious restoration then this is the part for you. Never find another one.
$145 plus shipping

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad Moparts!


Attachments
IMG_9133.JPG

IMG_9134.JPG

IMG_9137.JPG




Edited by QuickBpBp (01/14/18 08:46 PM)

Top
#2434716 - 01/14/18 08:45 PM Re: New Old Stock 70-2 Duster/Valiant Grille Parklamp lenses [Re: QuickBpBp]
QuickBpBp Offline
master

Registered: 07/06/03
Posts: 5871
Loc: SE PA.
Nos Pair of 70-2 Standard Duster Valiant Park lamp lenses excellent condition no boxes. $100pr plus shipping

Nos LH 70-2 Duster Valiant Park Lamp lens in box with wrinkled gasket excellent condition $50 plus shipping

Always Cracked and Crazed perfect for a real restoration.

Parts are located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad Moparts!


Attachments
IMG_9167.JPG

IMG_9168.JPG

IMG_9169.JPG




Edited by QuickBpBp (01/14/18 08:48 PM)

Top
#2436395 - 01/17/18 01:34 PM Re: A body rearview mirror [Re: QuickBpBp]
smuggler Offline
member

Registered: 10/28/13
Posts: 78
Loc: North Carolina USA
Standard mirror out of a Duster in nice shape.

$25 plus the ride
Thanks!


Attachments
IMG_2657.JPG

IMG_2658.JPG



Top
#2436397 - 01/17/18 01:39 PM Re: New 70 Duster black 6 bow headliner [Re: smuggler]
smuggler Offline
member

Registered: 10/28/13
Posts: 78
Loc: North Carolina USA
Bought a brand new 6 bow headliner for a 70 Duster from VANS for $70 on Ebay and I don't need it. Never opened the packaging. Purchased about 2 months ago.

Sell for $50 shipped.


Attachments
IMG_2655.JPG

IMG_2656.JPG



Top
#2436406 - 01/17/18 01:42 PM Re: 70 Duster visors in blue [Re: smuggler]
smuggler Offline
member

Registered: 10/28/13
Posts: 78
Loc: North Carolina USA
Nice set of original visors blue in color. Nice stiching with no visible tears. Has the mounts but not the visor tips.

$30 plus the ride
thanks!


Attachments
IMG_2659.JPG



Top
#2436425 - 01/17/18 02:14 PM Re: 68 69 Dart Inner Splash Shield [Re: smuggler]
smuggler Offline
member

Registered: 10/28/13
Posts: 78
Loc: North Carolina USA
SOLD--Thanks MOPARTS!

Original 68-69 Dart steel splash shield for the driver's side (left) that has been stripped and repainted. May fit other A bodies, not sure. Nice with no rusts or dents.




Edited by smuggler (01/18/18 11:37 AM)

Top
#2436760 - 01/18/18 08:11 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
Jiminy cricket Offline
member

Registered: 12/12/08
Posts: 119
Loc: CT
NOS 3 speed wiper switch. Was in an incorrect box. $250 shipped within the US


Attachments
0117181203[1].jpg

0117181204[1].jpg



Top
#2436829 - 01/18/18 10:46 AM 70-72 duster grille. CHEAP $40 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
In good shape,but not perefect...Priced to sell,not sit in my cellar because Im a dreamer and want more than its worth!! $40,calls only 603 209 1678.No emails...pay by us postal money order only.Im Ron Johnson and I sell my used parts for less!!!!!!!! Always!!!


Attachments
DSC00885.JPG

DSC00886.JPG



Top
#2436830 - 01/18/18 10:47 AM DUSTER WINDSHIELS STAINLESS SET $20 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
70-72 duster front windshield stainless set $20,calls only 603 209 1678.no emails.PAY BY US POSTAL MONEY ORDERS ONLY


Attachments
DSC00887.JPG



Top
#2436833 - 01/18/18 10:50 AM 66 VALIANT GAUGE CLUSTER $5 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
CAME OUT OF VALIANT.CLEAN FOR THE AGE.ONLY $5,CALLS ONLY 603 209 1678.NO EMAILS


Attachments
DSC00858.JPG




Edited by littleredcoffin (01/18/18 11:10 AM)

Top
#2437022 - 01/18/18 04:31 PM 68-69 DART RADIO/HEATER CONTROL BEZEL [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
68-69 DART non a/c heater control/radio bezel.not broken $15,calls only 603 209 1678.paymeny by US POSTAL MONEY ORDERS.NO EMAILING.


Attachments
DSC00841.JPG



Top
#2437025 - 01/18/18 04:33 PM 63-66 DART VALIANT CONVERTIBLE WINDSHIELD FRAME STAINESS [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
63-66 DART/VALIANT CONVERTIBLE WINDSHIELD FRAME STAINLESS SET.ALL ARE ON GOOD SHAPE $25SET.CALLS ONLY 603 209 1678.PAY BY US POSTAL MONEY ORDERS.NO EMAILING


Attachments
DSC01303.JPG



Top
#2437027 - 01/18/18 04:40 PM 70-72 SEAT BELTS [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
BOTH ARE IN USABLE SHAPE,BLACK $4PR,CALLS ONLY 603 209 1678.PAY BY US POSTAL MONEY ORDERS.NO EMAILING


Attachments
DSC01395.JPG



Top
#2437028 - 01/18/18 04:41 PM DOME LIGHT LENSE ASSEMBLY WITH WIRE HARNESS [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
GOOD USABLE CONDTION AS IS.$7,CALLS OBLY 603 209 1678.PAY BY US POSTAL MONEY ORDER,NO EMAILING


Attachments
DSC01396.JPG



Top
#2437032 - 01/18/18 04:45 PM JACK ASSEMBLY WING NUT [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
JACK ASSEMBLY WING NUT.HOLDS ASSEMBLY TO RIM.CLEAN.$3,CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORDERS


Attachments
DSC01403.JPG



Top
#2437035 - 01/18/18 04:47 PM 70-72 DUSTER AIR VENT CABLES [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
BOTH WORK FINE....NON A/C..$12PR.CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORDER


Attachments
DSC01404.JPG



Top
#2437042 - 01/18/18 05:16 PM 70-71 DUSTER TAILLIGHT ASSEMBLYS [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
70-72 PAIR OF DUSTER TAILLIGHT ASSEMLBYS.BOTH ARE IN GOOD SHAPE...LENSES ARE SHINY!!.ABOVE AVERAGE SHAPE $50PR,MY PRICE WONT BE BEATEN!!!!!!!!!!!!!!! CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORDERS.IM RON JOHNSON AND I SELL MY PARTS FOR LESS,EVERY DAY!!


Attachments
DSC01421.JPG

DSC01422.JPG

DSC01423.JPG



Top
#2437048 - 01/18/18 05:25 PM PASSENGERS SIDE 70-71 DUSTER TAILLIGHT ASSEMBLY [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
PASSENGERS SIDE 70-71 DUSTER TAILLIGHT ASSEMBLY.COLORING IS GOOD.ABOVE AVERAGE CONDITION.$25,CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY


Attachments
DSC01425.JPG



Top
#2437052 - 01/18/18 05:26 PM DUSTER HEADLIGHT BEZEL [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
DUSTER HEADLIGHT BEZEL,HAS 1 SMALL DING.CHEAP $4,CALLS ONLY 603 209 1678.PAY BY US POSTAL MONEY ORDERS ONLY


Attachments
DSC01420.JPG



Top
#2437056 - 01/18/18 05:28 PM GREEN MATCHED PAIR OF GREEN KICK PANELS [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
COLORING DESCENT.NOT CHAULKY. $10PR,CALLS ONLY 603 209 1678


Attachments
DSC01418.JPG



Top
#2437061 - 01/18/18 05:32 PM PASSENGERS SIDE KICK PANEL [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
BLACK IN DESCENT SHAPE $5,CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY


Attachments
DSC01419.JPG



Top
#2437065 - 01/18/18 05:34 PM SMALL BLOCK HEATER HOSE BRACKET [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
HOLDS HEATER HOSES OFF MOTOR.ATTACHES TO THE FRONT OF PASSENGERS SIDE OF ENGINE.$4,CALLS ONLY 603 209 1678.PAY BY US POSTAL MONEY ORDERS ONLY.NO EMAILS


Attachments
DSC01405.JPG



Top
#2437068 - 01/18/18 05:35 PM SMALL BLOCK ALUMINUM TIMING CHAIN COVER $10 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
IN GOOD SHAPE.NO DAMAGE.$10.CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORDERS


Attachments
DSC01410.JPG



Top
#2437071 - 01/18/18 05:37 PM SPEEDO CABLE WORKS FINE $5 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
SPEEDO CABLE.WORKS FINE $5,CALLS ONLY 603 209 1678.PAY BY US POSTAL MONEY ORDER.NO EMALS


Attachments
DSC01430.JPG



Top
#2437073 - 01/18/18 05:39 PM BLOWER MOTOR WORKS FINE [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
HEATER BLOWER MOTOR.WORKS FINE $5,CALLS ONLY 603 209 1678.NO EMAILS...PAY BY US POSTAL MONEY ORDERS


Attachments
DSC01412.JPG



Top
#2437075 - 01/18/18 05:40 PM 70-71 DUSTER FRONT SIDE MARKER ASSEMBLY $5 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
70-71 DUSTER SIDE MARKER FOR THE FRONT..NO BROKEN STUDS.LENSE COLOR GOOD.$5,CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORERS ONLY


Attachments
DSC01416.JPG



Top
#2437077 - 01/18/18 05:42 PM ASH TRAY LIGHT WIRE HARNESS [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
ASH TRAY LIGHT WIRE HARNESS...CORRECT AND ORIGINAL.$4,CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY


Attachments
DSC01415.JPG




Edited by littleredcoffin (01/18/18 05:43 PM)

Top
#2437081 - 01/18/18 05:47 PM GAS PEDDLE ASSEMBLY.CHEAP AND COMPLETE $6 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
GAS PEDAL ASSEMBLY.EVEN HAS BLACK PLASTIC PLUG TO KEEP ACCELERATOR CABLE IN.VERY COMPLETE $,CALLS ONLY 603 209 1678.NO EMAILS.PAY BY US POSTAL MONEY ORDERS ONLY


Attachments
DSC01443.JPG



Top
#2437115 - 01/18/18 06:33 PM V-8 OIL PAN.SMALL BLOCK [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
SMALL BLOCK V-8 oil pan.No # stamped into it.Early pan.Still will work on all A body cars.Not dented up.$15,calls only 603 209 1678.No emails


Attachments
DSC01434.JPG



Top
#2437116 - 01/18/18 06:35 PM 71 DUSTER FILLER NECK TUBE [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
CLEAN SHAPE.NOT RUSTED OUT $10,CALLS ONLY 603 209 1678.NO EMAILS


Attachments
DSC01429.JPG



Top
#2437135 - 01/18/18 07:03 PM 70-72 DUSTER FRONT BUMPER BRACKETS [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
duster front bumper brackets..some pitting,but not rusted out $15pr,calls only 603 209 1678


Attachments
DSC01432.JPG



Top
#2437500 - 01/19/18 12:08 PM Nos 70 & 71 Dart Demon Park lamp lenses [Re: moparts]
QuickBpBp Offline
master

Registered: 07/06/03
Posts: 5871
Loc: SE PA.
Nos 1970 RH Dart Park lamp lens and gasket in box has small paint flaws. Great for survivor

Nos 1971 LH Dart/Demon Park lamp lens and gasket in original packaging has small scratch in lens on back side

These could be a pair if you changed the paint scheme.

BOTH SOLD THANKS MOPARTS!


Part is located in SE PA.
Can send more pictures if interested.
Pm here on the board or e-mail bretts440"at"frontiernet.net
Thanks for free ad Moparts


Attachments
IMG_9183.JPG

IMG_9204.JPG




Edited by QuickBpBp (01/20/18 10:31 AM)

Top
#2437589 - 01/19/18 03:34 PM Re: 69 Fan Drive 2863259 [Re: QuickBpBp]
smuggler Offline
member

Registered: 10/28/13
Posts: 78
Loc: North Carolina USA
SOLD Thanks Moparts!


Fan drive unit from 69 340 car with 120CA date code. Clean condition--has very tight spin.



Attachments
IMG_2669.JPG

IMG_2670.JPG




Edited by smuggler (03/02/18 07:34 PM)

Top
#2437736 - 01/19/18 08:51 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
62maxxx Offline
member

Registered: 09/05/07
Posts: 50
Loc: N.W. Indiana
1975-77 Power Window switch/Drivers side, very nice condition for A/B/C bodies.

$65.00 with free shipping in USA.

(What a difference in wiring back in the day)

Rich,

Two 1 nine 3 one 6 zero

OR
magnumforce440@comcast.net


Attachments
switch 1.jpg

switch 2.jpg

switch 3.jpg



Top
#2438025 - 01/20/18 02:37 PM 1969 roadrunner air cleaner [Re: moparts]
mopar_muscle Offline
member

Registered: 06/27/07
Posts: 179
Loc: Idaho, USA
Very clean, original 1969 roadrunner air cleaner and filter. It's been in storage waiting for a project that never happened. Selling for a family member. No damage, just surface rust that can easily removed and repainted. $500 or best offer. mopar_muscle76@yahoo.com


Attachments
DSC02096.JPG

DSC02097.JPG

DSC02098.JPG

DSC02094.JPG



Top
#2438181 - 01/20/18 08:49 PM Drive shafts for sale [Re: moparts]
blewbyu Offline
master

Registered: 01/22/03
Posts: 3433
Loc: Florida
I have measured these as close as possible. Could be off an 1/8" or so:

44 7/8" No slip yoke 7290 on each end, May fit MT 727 AT with Dana in a
1970-71 Challenger or Coronet $250.00

45" Slip yoke for MT AT 7290 yokes on each end, May fit 727 AT 8 3/4 in
a 70-73 Duster Dart with 340 $125.00 "Does have one small ding"

45 1/2" Slip yoke for MT 727 AT 7290 yokes on each end, May fit AT 8 1/4
in a 74 Duster with 360.
May also fit MT AT 8 3/4 in a 70 Challenger 340 car $125.00

48" Slip yoke for MT 727 AT 7260 slip yoke side 7290 diff side, May fit
727 AT 8 3/4 in a 70 Dart $150.00

48" Slip yoke MT 727 AT 7260 yokes on each end, May fit AT 8 3/4 in a 70
Dart $125.00

48" Slip yoke MT 727 AT 7290 yokes on each end, May fit 727 AT 8 3/4 in
a 70 Dart $175.00

48 1/4" slip yoke 904 AT 7260 on each end $100.00

48 1/2" Slip yoke 904 AT 7260 on each end $100.00

48 1/2" Slip yoke MT 727 AT 7260 on each end $125.00

54 1/2" Slip yoke 904 AT 7260 on each end $100.00

55 3/4 Slip yoke MT 727 AT 7290 on each end $125.00

1965 Valiant Trunion Shaft 904 with 7 1/4" Rear End $75.00

All are plus shipping

blewbyu2bad@aol.com


Attachments
drive shafts.JPG

drive shafts 1.JPG




Edited by blewbyu (01/21/18 04:09 PM)

Top
#2438517 - 01/21/18 03:11 PM Re: Drive shafts for sale [Re: moparts]
bbtrux Offline
super stock

Registered: 05/03/04
Posts: 876
Loc: ohio
76 duster roof from non-vinyl top car - $50.00 . 76 a body heater box - $20.00 . 75 a body 120 mph guage cluster - $50.00 . Duster quarter window assemblies - $15.00 each . Call 419-512-1612 .


Edited by bbtrux (01/22/18 05:36 AM)

Top
#2438865 - 01/22/18 02:14 AM A-Body Pure Zinc Interleaves for Leaf Spring Rebuild [Re: moparts]
kentj340 Offline
pro stock

Registered: 03/04/11
Posts: 1293
Loc: Houston
A-Body Pure Zinc Interleaves for Leaf Spring Rebuild

All interleaves are made from 99.5+% pure soft zinc sheet, same as the originals.

#A10 – Car set of 10 pure zinc interleaves for springs with 6 steel leaves each side, $77.30.

#A8 – Car set of 8 pure zinc interleaves for springs with 4-1/2 or 5 steel leaves each side, $61.85.

#AC – Car set of pure zinc interleaves custom made to exactly reproduce your old zinc using information you provide, $77.30 for 10, $61.85 for 8.

#XL – One pure zinc interleaf, long, $7.73. Order two for springs with one extra leaf each side.

Add shipping by USPS Priority mail $13.65 per car set.

Contact kjohnst at postal dot net.


Attachments
Pure Zinc Interleaves1.JPG


_________________________
If you don't see two dolphins, you need a vacation.

Top
#2442317 - 01/28/18 02:00 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
SixDRacing Offline
mopar

Registered: 08/24/03
Posts: 466
Loc: hobbs, new mexico
1970 duster & demon rear wing spoiler. part #FP608. bought from year one. new, still in the box. 400.00 plus shipping. neracer@hotmail.com. thanks, ken.

Top
#2442324 - 01/28/18 02:08 PM Re: A Body - Parts For Sale - 1st Quarter [Re: SixDRacing]
SixDRacing Offline
mopar

Registered: 08/24/03
Posts: 466
Loc: hobbs, new mexico
new rocky mountain dash. full length with no glove box. has place for radio, heater control, two large gauges, five small gauges, headlight switch, and wiper switch. has not been installed in a dash, but has had the gauges installed and removed. 450.00 plus shipping. neracer@hotmail.com thanks, ken. sold pending payment


Edited by SixDRacing (01/29/18 08:31 PM)

Top
#2442435 - 01/28/18 05:59 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
Very rare 1971 340 SIX PACK set up off of a Mr. Norms Grand Spaulding Dodge GSS Demon $2500.00 (708)288-2879 Scott


Attachments
parts 3-28-17 003.JPG

parts 3-28-17 004.JPG

parts 3-28-17 005.JPG



Top
#2442449 - 01/28/18 06:13 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
1970 340 4-speed Carter AVS carb core to restore, #4933, date code K9, it has it's original idle stop solenoid and it's original carb tag $350.00 (708)288-2879 Scott


Attachments
parts 8-1-17 019.JPG

parts 8-1-17 021.JPG

parts 8-1-17 022.JPG

parts 8-1-17 024.JPG



Top
#2442461 - 01/28/18 06:24 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
One pair of 1968 Dodge Dart front fenders, the one that is in black primer is NOS and has never been installed on a car, the other fender is off a GTS and has zero rust, both fenders have a couple minute dings, nothing major $850.00 for the pair (708)288-2879 Scott


Attachments
parts 4-26-15 001.JPG

parts 4-26-15 002.JPG

parts 4-26-15 004.JPG



Top
#2442464 - 01/28/18 06:28 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
One pair of 1968 426 HEMI Super Stock Holley crossram carbs, List 4235 and 4236 in excellent used condition, very little run time $1150.00 for the pair (708)288-2879 Scott


Attachments
parts 11-27-17 014.JPG

parts 11-27-17 015.JPG

parts 11-27-17 016.JPG

parts 11-27-17 017.JPG



Top
#2442470 - 01/28/18 06:37 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
1969, 1970 and 1971 small block 10 1/2 inch bellhousing, nice used condition, not cracked, cast #2892482 $200.00 (708)288-2879 Scott


Attachments
parts 12-14-17 001.JPG

parts 12-14-17 002.JPG



Top
#2442475 - 01/28/18 06:41 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
1971 A-body hood pin kit NOS in the box, part 3579667 $575.00 (708)288-2879 Scott


Attachments
parts 12-28-17 020.JPG

parts 12-28-17 019.JPG

parts 12-28-17 021.JPG



Top
#2443120 - 01/29/18 08:29 PM Re: A Body - Parts For Sale - 1st Quarter [Re: Hemihead2]
mattsmopars Offline
master

Registered: 03/02/07
Posts: 2608
Loc: tennessee,usa
1972 340 A body LH drivers side exhaust manifold. 3614368 part number with a 9-32-71 casting date. I see no issues with this manifold.
Asking $175.00 plus the shipping costs. I can do PayPal if you want to cover the 3% fees other wise postal money order. Pm me here if your interested. I have additional pictures I can email to interested parties. Thank you
Matt


Attachments
IMG_8670.JPG

IMG_8671.JPG

IMG_8674.JPG




Edited by mattsmopars (01/29/18 08:36 PM)

Top
#2443756 - 01/30/18 08:46 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
challenger6pack Offline
mopar

Registered: 04/28/03
Posts: 569
Loc: USA
1964 Starter. This is a working starter. The 64 is clear on it. It is a good one for someone needing a correct dated starter for a restoration. I am asking $20 + actual shipping costs for it. I can be reached by pm. Thanks.


Attachments
Screenshot_2018-01-30-20-40-27-1.png



Top
#2444072 - 01/31/18 12:15 PM 68 CUDA,DART BUCKET SEATS W/TRACKS [Re: moparts]
gdmusclecar Offline
mopar

Registered: 10/31/04
Posts: 513
Loc: ORANGE PARK,FL
68 CUDA,DART BUCKET SEATS W/TRACKS ,THE SEAT TRACKS NEED SOME REPAIR $499

*WE CAN SHIP*

E-MAIL: GDMUSCLECARPARTS@YAHOO.COM

ORANGE PARK,FL.


Attachments
AB1.jpg



Top
#2444136 - 01/31/18 02:26 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
B1Frank Offline
mopar

Registered: 09/18/07
Posts: 698
Loc: West Virginia
1967-69 small bolt pattern a body 8 3/4 flared brake drums,..need blasting for a Virginia car,...$85.00 thanks moparts


Edited by B1Frank (02/03/18 11:09 AM)

Top
#2444404 - 01/31/18 10:03 PM 68 Dart fiberglass Hemi Hood [Re: moparts]
Rhinodart Offline
Rhinotruck

Registered: 01/20/03
Posts: 35843
Loc: Round Lake Beach, Illinoisy
SOLD!

I have a new Hemi Dart hood pin on that has never been mounted, has two scoop stiffeners all in factory style black primer. $500.00 plus shipping or can deliver to the Chicagoland Mopar Swap or Indy Swap with prepayment. Call Jim at 224-688-4352 or PM me here.


Attachments
IMG_20180131_163032207.jpg

IMG_20180131_163039269.jpg

IMG_20180131_163051201.jpg




Edited by Rhinodart (02/11/18 10:00 AM)
_________________________
The funny thing about science is that if you change one miniscule parameter you change the entire outcome to the way you want it.

JB Rhinehart, Realist

2018 Carlisle All-Chrysler Nationals July 13-14
Hurst Nationals held in conjunction includes
1968 Dodge Dart and Barracuda Hemi Super Stock Reunion!
Expo Center across from the main gate, register online!

Top
#2444450 - 01/31/18 11:35 PM brackets [Re: Rhinodart]
cudacar340 Offline
super stock

Registered: 02/01/04
Posts: 848
Loc: Grosse Isle, Mi
I have lots of small parts for sale , I'll post in groups. Cash, money order or PayPal
Kick down pivot 15
Alt adjust strap 15
A body core support brace, blasted 25
Inside door handle pivot 15
RB alternator triangle 15
A eng distributor clamp 15
A eng strut between block and trans 15
Located at Daves hot rod garage in se Michigan
734-692-7151

Thank you


Attachments
image.jpg



Top
#2444652 - 02/01/18 11:37 AM 70-76 BRAND NEW OUTER DOOR HANDLES $42PR. [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
BRAND NEW 70-76 OUTER DOOR HANDLES.NEW REPOPS IN THE BOXES.$42PR,ONLY HAVE 7 PAIRS...CHROME PUSH BUTTONS.CALLS ONLY 603 209 1678,PAYMENT BY US POSTAL MONEY ORDER ONLY.I WILL HAVE PICTURES UP IN 1 WEEK,IF THEY DONT SELL BEFORE THEN,LOWEST PRICE ANYWHERE.

Top
#2444697 - 02/01/18 12:45 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
B1Frank Offline
mopar

Registered: 09/18/07
Posts: 698
Loc: West Virginia
1969 org barracuda dash clove box trim,..$50.00 call Mike at 810 834-7408 thanks moparts !


Attachments
Mikes barracuda clove box trim.jpg



Top
#2444759 - 02/01/18 02:53 PM BB Hooker Fenderwell Headers [Re: B1Frank]
Duster_Dude Offline
enthusiast

Registered: 01/02/06
Posts: 291
Loc: Ohio
Up for sale is a set of virtually new Hooker Super Competition fenderwell exit headers. Hooker part number 5215HKR. Plans changed and ended up building my own set.

I altered the #2 tube to clear the down bar from the firewall to the right front frame to fit the car. My chassis is tied together at the shock mount to the down bar, and the header would not clear that area. This modification will do nothing except make the right side header fit only better and it was done right. The welds have been blended in nicely. You can see this area in the pics as it has a fresher coat of black paint.

The headers are unused, no fumes have been thru them. They do have scratches and a bit of grey primer on them from working around them while installed in the car during the build process.

2" tubes, 3 1/2" flanged collector.
Painted black, just as they came from Hooker, although it is not high heat paint.
Retails new at Summit Racing for $605.95.
Sell for $475.00 plus shipping or local pickup.
They are heavy, so the shipping cost will reflect the weight.
PM for info.


Attachments
20180129_172014.jpg

20180129_171941.jpg

20180129_172021.jpg



Top
#2445130 - 02/02/18 08:59 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
JoshsMuscleCar Offline
enthusiast

Registered: 12/12/15
Posts: 357
Loc: Canfield, Ohio
Josh's Muscle Car Parts February Special

1972 Dodge Demon Front Fender Emblem $49.99

Quality die-cast reproduction of the "Demon" fender emblem for 1972 Dodge Demon models. Manufactured in the correct style with Yellow/Red colors and chrome trim. Sold individually. 2 required per vehicle. Includes mounting hardware. These are the nicest reproduction Demon emblems we've ever seen.
Mopar Authentic Restoration™ Product

http://www.musclecarparts.cc/shop/item.aspx/1972-dodge-demon-front-fender-emblem/1805/

Moparts members save with coupon code PHIL at check out.


Attachments
sc7031.jpg




Edited by JoshsMuscleCar (02/02/18 09:03 AM)
_________________________

Top
#2445761 - 02/03/18 03:25 PM Horn Pad Asm for 68-69 A/B Body Woodgrain Steering Wheel [Re: moparts]
Pntastar69 Offline
master

Registered: 01/20/03
Posts: 2706
Loc: Gilbertsville, PA 19525
Horn Pad Asm for 68-69 A and B Body Woodgrain Steering Wheel.
Retainer 2925135 - had it powder coated silver - some minor blems
Center Cap excellent condition
New Horn Switch 2822120
New Dodge emblem
Hardware included
$225 shipped to the states from 19525, money order only

Pix are too large to attach. PM me and I'll e-mail them.

SOLD


Edited by Pntastar69 (02/22/18 06:53 PM)
_________________________


Mark

Top
#2445863 - 02/03/18 05:59 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
MoPar Offline
super stock

Registered: 01/23/03
Posts: 992
'A'Body 4 speed console some bumps and bruises but the price is right $300.00 608-739-4489


Attachments
20171107_101609.jpg

20171107_101631.jpg

20171107_101639.jpg

20171107_101622.jpg



Top
#2445915 - 02/03/18 07:29 PM Re: A Body - Parts For Sale - 1st Quarter [Re: MoPar]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
NOS in the box 1968 340 prestolite dual point distributor, part #2875124, never installed in a car $375.00 (708)288-2879 Scott


Attachments
parts 2-2-18 011.JPG

parts 2-2-18 012.JPG

parts 2-2-18 013.JPG

parts 2-2-18 014.JPG



Top
#2446238 - 02/04/18 11:52 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
New Vacuum Advance Units!!


Its Hard Enough To Locate An Original Distributor For Your Car, But Even Harder To Find A Working Vacuum Advance Unit.
We Now Offer These 3 Types Of Advances For Both Big Blocks And Small Blocks
(Except 70-71 Big Blocks W/Retard Solenoid).

1962 Through 1969 Dual Points $85,
1970-1971 340 Dual Points $100,
1970-1971 440-Pack and 426 Hemi Dual Points $110,
For All 1962 And Newer Single Point And Electronic $45.

tonysparts.com

302-398-0821,

Tonys Parts

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2446247 - 02/04/18 12:06 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
4-Speed Parts Blowout Sale!!

Shift Rod Sets $110,

Shift Rod Levers/Tab Sets $35,

Shifter Mounting Plates $30-$55,

Pedal To Z-Bar Rods $40,

Throwout Forks $40-$45,

Z-Bars $45,

Z-Bar Frame Bracket $35,

Smallblock Bellhousings $150,

Bellhousing Inspection Covers $65-$95,

63-66 A-Body 4-Speed Pedals W/O Spring Anchor $95,

New 4-speed humps $130,

tonysparts.com

302-398-0821,

Tonys Parts

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2447284 - 02/06/18 04:16 AM 64 Plymouth Valiant parts [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
PARTING OUT 65 VALIANT 4 DOOR.FACTORY 273,4 SPEED,WITH 7.25 SURE GRIP.SURE GRIP REAR $300..COMPLETE 4 SPEED SET UP...BELLHOUSING,FLYWHEEL,TRANNY,SHIFTER,SHIFT RODS,PLATE PEDALS,Z BAR ROD,PASS THROUGH ROD,,MOST ALL PIECES TO KICK IT OVER TO 4 SPEED.$650...,SUPER CLEAN TRUNK LID $175,MOTOR IS COMPLETE,BUT STUCK,2 BARREL...MECHANICAL ROCKER ARM ASSEMBLYS WITH PUSH RODS $85SET UP..CAR IS VERY COMPLETE.CALLS ONLY 603 209 1678

Top
#2447285 - 02/06/18 04:18 AM 63-66 V-8 CENTER LINK. $95 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
63-66 V-8 CENTER LINK.$95.CALLS ONLY.CALL 603 209 1678

Top
#2447286 - 02/06/18 04:21 AM V-8 CAST IRON OIL FILTER ADAPTER [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
V-8 OIL FILTER 90 DEGREE ADAPTER WITH BOLT.$25,V-8 OIL PAN $20,CORRECT 273 V8 PULLEYS ,NO A/C $30PR,ALTERNATOR BRACKET SET $30,CALLS ONLY 603 209 1678

Top
#2447635 - 02/06/18 06:24 PM Re: Hurst Shifter Mopar A body [Re: shifterguy]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
One pair of NOS 1970 and up A-body 340 emblems, never been out of the package, part #3612874 supersedes part #2998880 $150.00 for the pair (708)288-2879 Scott


Attachments
parts 2-2-18 021.JPG

parts 2-2-18 022.JPG



Top
#2447641 - 02/06/18 06:35 PM Re: Hurst Shifter Mopar A body [Re: dsd70bee]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
1969 and earlier small block 340, 318 and 273 single grove crank pulley in nice used condition $90.00 (708)288-2879 Scott


Attachments
Prts 2-6-18 001.JPG

Prts 2-6-18 002.JPG



Top
#2447684 - 02/06/18 07:12 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
One set of 1968 and 1969 "A" and "B" body used original bucket seat hinge covers and one seat belt receiver three of the hinge covers are molded in green the other one is molded in black, two of the hinge covers have small chips in them $60.00 for everything (708)288-2879 Scott


Attachments
Prts 2-6-18 023.JPG

Prts 2-6-18 024.JPG

Prts 2-6-18 025.JPG



Top
#2448545 - 02/08/18 12:30 PM 1970 Duel point distributor for 340 [Re: moparts]
blewbyu Offline
master

Registered: 01/22/03
Posts: 3433
Loc: Florida
I have a nice 70 duel point distributor for 340 original assembly line part. The date code is fourth week of 1970 $200 plus shipping
Blewbyu2bad@aol.com


Attachments
IMG_1710.JPG



Top
#2448959 - 02/09/18 01:06 AM BIG BLOCK AIR CLEANER [Re: moparts]
mopar_muscle Offline
member

Registered: 06/27/07
Posts: 179
Loc: Idaho, USA
DUAL SNORKEL AIR CLEANER. IT IS IN REALLY GOOD CONDITION FOR ITS AGE....STILL HAS ITS ORIGINAL BLACK WRINKLE PAINT.

$400

mopar_muscle76@yahoo.com


Attachments
s-l1600.jpg

s-l16002.jpg

s-l16003.jpg

s-l16004.jpg



Top
#2448964 - 02/09/18 01:10 AM 1968-69 Mopar unslienced air filter [Re: moparts]
mopar_muscle Offline
member

Registered: 06/27/07
Posts: 179
Loc: Idaho, USA
Original OEM part. made for the 68-69 small block engines with a 4 BBL. Comes with a new air cleaner and 340 pie tin.

$275

mopar_muscle76@yahoo.com


Attachments
DSC02130.JPG

DSC02131.JPG

DSC02132.JPG



Top
#2449794 - 02/10/18 06:54 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
penski61 Offline


Registered: 01/11/15
Posts: 84
Loc: mesa , az
parts located in mesa az
1972 Dodge Dart front end / clip includes
Front bumper
Lower valance
Hood latch support
Hood
Fenders and extensions
Grill (has some broken tabs)
entire front clip - $750
also have parts from a 73 duster
1973 space duster rear fold down seat upper and lower cushion -$75
1973 duster dash -$100
1973 duster gas tank -$free
https://phoenix.craigslist.org/evl/pts/d/1972-dodge-dart-front-end-clip/6490345973.html


Edited by penski61 (02/13/18 10:30 AM)

Top
#2450308 - 02/11/18 06:59 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
727builder Offline
super stock

Registered: 02/03/06
Posts: 1005
Loc: Tennessee
Dash frame I saved from a 1971 340 Plymouth duster that went to the crusher. frown
Just the bare dash frame, Do not have 340 cluster. Has a few small holes that would need fixed for show car. $300 plus shipping. Or come pick up in person.
Located in Chattanooga Tn


Can send pics.
Email me @ Mcroft360@aol.com or call or text at 423-402-6752

Thanks Moparts!!

Top
#2450582 - 02/12/18 08:19 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
++MAX WEDGE++ Offline
member

Registered: 04/21/08
Posts: 87
Loc: Near Columbus, Ohio
64 to 66 bell housing, real good shape and not beat up, good threads 110.00 + shipping. bell is cast iron.


Attachments
DSC04009.JPG

DSC04011.JPG

DSC04008.JPG




Edited by ++MAX WEDGE++ (02/12/18 08:22 AM)

Top
#2451119 - 02/13/18 08:35 AM 63-65 VALIANT STAILESS DOG DISH TYPE HUB CAP SET $35 [Re: moparts]
littleredcoffin Offline
master

Registered: 09/29/03
Posts: 4095
Loc: NH USA
I HAVE A SET OF 4,CLEAN,WITH THE VALIANT MEDALLION IN THE MIDDLE DOG DISH STAINLESS HUBCAPS.ALL ARE IN GOOD CONDITON.NO PICTURES YET.BUT I THINK THEY WILL SELL QUICKLY FOR $35SET EVEN WITHOUT A PICTURE.CALLS ONLY 603 209 1678.PAYMENT BY US POSTAL MONEY ORDER ONLY

Top
#2451202 - 02/13/18 11:35 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
rtplumcrazy1 Offline
super stock

Registered: 01/15/09
Posts: 903
Loc: Oregon
69 Dart 340 parts, front spring hangers oem 45 for pair, rear shock tear axle plates oem 65 for pair, original 340/727 8 3/4 factory rear driveline $100, brake pedal for auto $15. Call me 541 868 6431
_________________________
Put a big block 4 speed Scat Pack Dodge in your garage.

Top
#2451467 - 02/13/18 08:58 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
f8-4life Offline
member

Registered: 07/19/12
Posts: 101
Loc: Ohio
Selling a set of 67-69 A-Body bucket seat tracks.
Removed from a '68 barracuda, these are all original units.
Great cores for resto.

$350, my email is skate1green@yahoo.com


Edited by f8-4life (02/18/18 05:57 PM)

Top
#2452039 - 02/15/18 06:45 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
Slap Shot Offline
top fuel

Registered: 11/03/03
Posts: 1607
Loc: Dover,Pa
Dodge Plymouth mopar A Body 8 3/4 rear with small bolt pattern 5x4 axles but no center chunk.. Duster Dart Demon $550 picked up in York,Pa 717 577-0270


Attachments
00o0o_fp96WBcoww_1200x900.jpg



Top
#2452040 - 02/15/18 06:51 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
Slap Shot Offline
top fuel

Registered: 11/03/03
Posts: 1607
Loc: Dover,Pa
complete factory A body small bolt pattern front disc brake setup from a 1971 Plymouth Duster 340 717 577-0270 $500 picked up in York,Pa


Attachments
00i0i_eAXB800Mtod_600x450.jpg



Top
#2452041 - 02/15/18 06:52 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
Slap Shot Offline
top fuel

Registered: 11/03/03
Posts: 1607
Loc: Dover,Pa
sold


Edited by Slap Shot (02/23/18 10:48 PM)

Top
#2452244 - 02/15/18 03:11 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
Slap Shot Offline
top fuel

Registered: 11/03/03
Posts: 1607
Loc: Dover,Pa
1970 1971 1972 Plymouth Duster factory steel hood in great shape no rust came off a Duster I got from Oregon. $300 picked up in York,Pa 717 577-0270

Top
#2452245 - 02/15/18 03:12 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
Slap Shot Offline
top fuel

Registered: 11/03/03
Posts: 1607
Loc: Dover,Pa
trunk lid for a 1970 1971 1972 Plymouth Duster or Dodge Demon in good shape may fit other years $150 picked up in York,Pa 717 577-0270

Top
#2453627 - 02/18/18 06:11 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
727builder Offline
super stock

Registered: 02/03/06
Posts: 1005
Loc: Tennessee
Have all 4 side marker lights from a 69 Plymouth valiant. One of the amber lights has one of the studs broken half off. Take $150 for the set. Plus shipping.
Pm here or for quicker reply, Email me at Mcroft360@aol.com Can send more pics.

Thanks Moparts!!


Attachments
20180218_180603.jpg



Top
#2454029 - 02/19/18 02:38 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
71pan Offline
enthusiast

Registered: 06/03/05
Posts: 248
Loc: central Pa.
Sharkstoothe grill in great shape no cracks on fins or lenses had cracks on flat part of grille previous owner fixed had grill stored for twenty years 400 plus ride contact me here or 717 823 3429.
SOLD


Attachments
20180218_215911.jpg

20180218_215727.jpg




Edited by 71pan (02/25/18 01:02 PM)

Top
#2454037 - 02/19/18 03:04 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TVU370 Offline
member

Registered: 08/04/04
Posts: 106
1967-69 Barracuda Convertible rear interior trim panels. One left and one right side black in color with no cracks or missing chunks. Arm rests not included. Located near Philadelphia PA. Would prefer local pickup, shipping costs extra.$425.00 for the pair. Call or text 267-239-1309


Attachments
IMG_20180216_104128.jpg

IMG_20180216_103745.jpg




Edited by TVU370 (02/19/18 04:24 PM)

Top
#2454038 - 02/19/18 03:07 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TVU370 Offline
member

Registered: 08/04/04
Posts: 106
One blue three spoke standard steering wheel removed from a '70 Dart with no cracks. Located near Philadelphia PA $125.00, shipping extra call or text 267-229-1309


Attachments
IMG_20180216_103547.jpg




Edited by TVU370 (02/19/18 04:24 PM)

Top
#2454062 - 02/19/18 03:49 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
NANKET Online   work
master

Registered: 12/13/03
Posts: 3913
Loc: northwest USA
Blue horn cap for standard steering wheel 1970 A body. $50 plus shipping. PM or email.


Attachments
image.jpg



Top
#2454373 - 02/19/18 11:06 PM Re: A Body - Parts For Sale - 1st Quarter [Re: Slap Shot]
JEJJ Offline
pro stock

Registered: 12/24/04
Posts: 1556
Loc: Western,NY
Restored 1968-9 unsilenced air cleaner........*Sold*

*FREE SHIPPING*

Thanks for the Ad Moparts

Jim

716-655-5477

bakurruda@aol.com


Attachments
IMG_5557.JPG




Edited by JEJJ (02/23/18 10:23 AM)

Top
#2454441 - 02/20/18 06:46 AM Re: A Body - Parts For Sale - 1st Quarter [Re: JEJJ]
1974 474 Duster Offline
mopar

Registered: 01/20/08
Posts: 612
Loc: Rochester, PA (near Pittsburgh...
Center-line brushed Auto/Drag 15x3 1/2" 4" small bolt pattern. Bought new from Jegs many years ago. No rash always clean, never in the weather. Descent 165/15 radials tires, lots of tread, little or no cracking anywhere that I can see. %175pr plus actual shipping costs from 15074 or will arrange delivery w/in 75 miles
Thanks, Ken


Attachments
0319091714.jpg

MVC-030S.JPG



Top
#2454481 - 02/20/18 09:25 AM Original Fan Shrouds 2785614 [Re: 1974 474 Duster]
G-Money1320 Offline


Registered: 05/13/07
Posts: 1664
Loc: Mi.
I have a pair of original fan shrouds for the 68-69 A-bodies with all motors. Part number 2785614. Both are in good shape with no cracks or breaks on either. One does have some kind of scuff mark on the edge, and one has some overspray paint on it. $125 plus shipping each from Michigan. PM me here or call :734-678-1162. Greg


Attachments
fan shrouds.jpg




Edited by G-Money1320 (02/20/18 09:27 AM)
_________________________
416 stroker from Nick at Compu-flow. 11.14 in full street trim. Seems like a new best every time out.
11.06 open headers----so far!!

Top
#2454652 - 02/20/18 02:03 PM Hemi Dart/Barracuda Original Seat Brackets [Re: moparts]
ww2 Offline
member

Registered: 03/23/05
Posts: 96
Loc: St. Paul, Mn.
For sale is a pair of seat brackets from an original '68 Hemi Super Stock car.One side will need a small repair to be correct. Paypal accepted.
$125.00 plus shipping
If interested PM for photos as I guess mine are to big to load here.

SOLD


Edited by ww2 (02/21/18 10:07 AM)

Top
#2454959 - 02/21/18 01:37 AM Re: Hemi Dart/Barracuda Original Seat Brackets [Re: ww2]
MI Mopar Works Offline
mopar

Registered: 12/24/15
Posts: 486
Loc: MI
This is a set of 1967-1972 Mopar O.E disc brake rotors that are in nice used shape. They are from a 1970 Duster 340 and have been cleaned up and turned true. They do retain the original left and right hand wheel studs. Ready to go. Aking $60 OBO. Contact Dave with any questions. (734)624-2212 or PM me.


Attachments
67-72abodyrotors.jpg


_________________________
MI Mopar Works
Parts Sales
Restoration and detailing of all kinds of mopar hardware
https://www.facebook.com/MIMoparWorks/


Top
#2455008 - 02/21/18 08:30 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
JoshsMuscleCar Offline
enthusiast

Registered: 12/12/15
Posts: 357
Loc: Canfield, Ohio
Josh's Muscle Car Parts 1971 GULL Wing Sale

We just made a fresh batch of our 1971 Gull wings So we are putting them on sale. Starting today and going through the end of March if you use code 71GULL at checkout you will save $75.00!

We are proud to bring our fellow Mopar fans a very high quality, time period correct, Gull Wing Spoiler kit and at an affordable price. Our Gull wing spoilers are made of ABS plastic, exactly as the originals were made. You can find other sellers with Gull Wings advertising them as “Composite”. You might ask what “Composite” is? It’s fiberglass. Don’t be fooled. Check out one of these “Composite” spoilers, take a peek inside the pedestal opening area and you’ll clearly see the fibers from the fiberglass. These “Composite” spoilers are offered because the tooling costs are much less than ABS tooling. We did not want to be cheap and bring a lesser quality Gull Wing spoiler to market. Our ABS plastic spoilers are the REAL DEAL! Our pedestals (feet) are made of aluminum and are hollow just as originals. Cheaper spoilers will use solid aluminum feet. This is not time period correct.
Our A-Body Gull wing spoiler features the same 36" pedestal spacing, aluminum horseshoe attaching brackets, etc. We promise won't be unhappy with this A-Body Gull wing spoiler.

We offer this Gull Wing spoiler in several packages:

Basic Package, includes spoiler blade, two pedestals, two pedestal gaskets, spoiler to pedestal attaching brackets, pedestal bolts, basic nuts and screws
Premium - includes all of the above, plus under decklid brackets
Super Premium - includes all of the above and special wing nuts

Dodge A-Body https://www.musclecarparts.cc/shop/item....n-and-dart/594/

Plymouth A-Body https://www.musclecarparts.cc/shop/item....ster-scamp/593/

See These And Many More Parts At Our Website http://www.musclecarparts.cc/shop/


Attachments
gullwing1jmcp.jpg

gullwing2.jpg




Edited by JoshsMuscleCar (02/21/18 08:36 AM)
_________________________

Top
#2455514 - 02/22/18 07:59 AM Re: A Body - Parts For Sale - 1st Quarter [Re: JoshsMuscleCar]
68DART360 Offline
mopar

Registered: 08/31/03
Posts: 452
Loc: Easton, PA
Parts from a 1968 Dart:
Stock flat hood no rust $175
Front bumper with brackets chrome is decent $150
center grille without parking lamps $100
left and right fenders some rust in lower corners A few dings in right fender $200 for the pair
Pics upon request through text message or email.
PM me here for more info
Thanks!

Top
#2455848 - 02/22/18 07:11 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
Mr 5 Speed Offline
member

Registered: 01/16/08
Posts: 128
Loc: New Haven County CT
Lamb front brakes and spindles off a hemi superstock SS/AH barracuda for sale.
$1,100 O.B.O
Call Emilio 203-627-2806


Attachments
BRAKES2.JPG



Top
#2455951 - 02/22/18 10:41 PM Re: A Body - Parts For Sale - 1st Quarter [Re: Mr 5 Speed]
mattsmopars Offline
master

Registered: 03/02/07
Posts: 2608
Loc: tennessee,usa
Mopar Tuff wheel. Decent original wheel came off a race car. foam was trimmed on the outer two spokes but other wise tight. The center is better than most. Asking $40.00 OBO plus the shipping cost.
I have several pictures if your interested just PM me here.
Matt


Attachments
IMG_8753.JPG



Top
#2457403 - 02/25/18 02:58 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
BLACKHEMIRR Offline
enthusiast

Registered: 09/16/04
Posts: 377
Pair of 340 exhaust manifolds that I think are correct for a 69 A-body or 70 T/A-AAR. Casting numbers 2863549 (0369) and 2863553 (3209. Nice condition, missing heat riser. Passenger side manifold has a small wear mark under the date code on the bottom/leading edge. Would not show when installed. Asking $500 for the pair plus shipping.

PM me here if interested. Thanks for the ad.

Top
#2457526 - 02/25/18 06:30 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
moparply Offline
master

Registered: 08/27/03
Posts: 5089
Loc: NJ
NOS Dodge Plymouth rear shocks, both part number 3400620, both in excellent condition in their original box's, $200 pair

Both of these shocks are stamped the same at the base. It's not easy to find a pair of NOS factory shocks both stamped the same.

All of the bushings are very soft with no dry cracking.


Email Kenei@comcast.net


Attachments
image.jpg



Top
#2458066 - 02/26/18 06:00 PM Re: COMPLETE `63-66 4 SPEED SET UP!!!!! $600 [Re: moparts]
rtplumcrazy1 Offline
super stock

Registered: 01/15/09
Posts: 903
Loc: Oregon
Master cylinder #3461187, price is only $60 plus freight, original rebuild able 541 868 6431.


Edited by rtplumcrazy1 (02/26/18 06:04 PM)
_________________________
Put a big block 4 speed Scat Pack Dodge in your garage.

Top
#2458071 - 02/26/18 06:08 PM Re: COMPLETE `63-66 4 SPEED SET UP!!!!! $600 [Re: moparts]
rtplumcrazy1 Offline
super stock

Registered: 01/15/09
Posts: 903
Loc: Oregon
69 340 Dart parts, 340 hood bezels and.inserts $50 some missing studs, stock drive shafts for 340 with a 727 $85. Rear axle shock plate's $60 for pair. Front spring mounts $45. Also have brake pedal and oem master cylinder. Call me 541 868 6431
_________________________
Put a big block 4 speed Scat Pack Dodge in your garage.

Top
#2458161 - 02/26/18 08:30 PM 67-76 dart hardtop rear window glass [Re: moparts]
kenworth_goose Offline
top fuel

Registered: 05/13/06
Posts: 1818
Loc: ky.
I have a rear window glass for a 67-76 hardtop dart. Glass is tinted and originally from an a/c car. Very nice window. 75.00

Top
#2458164 - 02/26/18 08:32 PM 69 dart rear seat [Re: kenworth_goose]
kenworth_goose Offline
top fuel

Registered: 05/13/06
Posts: 1818
Loc: ky.
I have a rear seat top and bottom for a 69 dart hardtop. Seat needs recovered but is in good condition. 75.00


Edited by kenworth_goose (02/26/18 09:40 PM)

Top
#2458492 - 02/27/18 02:46 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5359
Loc: DELAWARE
All A-Body:

Front Frame Rails $225ea,

Front Inner Fenders $225ea,

8-3/4 Rear-End W/O Center Section $645,

V8 K-Frame $185-$195,

426 Hemi Heads, Need Repair $695pr,

426 Hemi Warranty (With Tag) Block With Pistons, Cast 10-7-68 $5995,

1967 Big Block #915 Cylinder Heads $375pr,

Big Block #906 Cylinder Heads $175pr,

66-70 340-383-440 3-Rod Kickdown Linkage $135+Up,

Window Regulators And Tracks $Call,

Control Arms With Swaybar Brackets $135

tonysparts.com

302-398-0821,

Tonys Parts

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2458614 - 02/27/18 07:53 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
MoPar Offline
super stock

Registered: 01/23/03
Posts: 992
Drivers side inner hinge cover, good condition. $40.00 delivered in 48 states. 608-739-4489


Attachments
20180226_193314.jpg

20180226_193328.jpg



Top
#2458802 - 02/28/18 09:56 AM Re: A Body - Parts For Sale - 1st Quarter [Re: MoPar]
beepedout70 Offline
mopar

Registered: 08/16/03
Posts: 672
Loc: New Jersey
1971 340 long block (assembled/never apart, block, crank, rods, 2.02 heads, oil pan, balancer, water pump housing) block casting date 9/20/70, VIN 1B307736 $1500
1971 340 TQ intake manifold (casting number 3512100) $150
1971 340 TQ throttle bracket $45
1971 340 automatic distributor – single point (part number 3438517) $100
1971/early 1972 340 727 automatic transmission (PK number3515843) $350
1971 340 26” radiator (part number 3443969) previously re-cored, recently tanked and pressured tested $375

3 piece automatic transmission kickdown linkage $100
340 motor mount brackets $75
Small block fan pulley & crank pulley for PS and non-A/C $75pr.
Small block alternator brackets for non A/C $40
Small block power steering pump and brackets $75

1967 small block 727 automatic transmission (PK number 2801542) $150
1970 340 intake manifold (casting number 3462848) $125
1973 340 TQ carburetor (list number 6340) $125
1973 340 TQ intake manifold $90
360 harmonic balancer $20

email me:
FK5runner@yahoo.com

Top
#2459543 - 03/01/18 04:12 PM Re: A Body - Parts For Sale - 1st Quarter [Re: beepedout70]
smuggler Offline
member

Registered: 10/28/13
Posts: 78
Loc: North Carolina USA
Factory original Hurst shifter bolt-in style (71-74) for A body (#7926). Chrome is in good shape and is usable as a driver (has some minor scuffing/scratching and a couple very small chips). Threads are nice.

A very solid presentable piece that is getting harder to find.

$250 plus shipping
Thanks!


Attachments
IMG_2695.JPG

IMG_2696.JPG

IMG_2697.JPG



Top
#2460587 - 03/03/18 04:30 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
Duster 1970 340 Offline
member

Registered: 11/02/08
Posts: 9
Loc: Ontario,Canada
NOS PIPES Front 1968 Cuda B/B 383 or 440
New never used..
800.US text for pics
613 329 0865 600. US


Edited by Duster 1970 340 (03/08/18 07:24 PM)

Top
#2460950 - 03/04/18 01:06 PM Re: A Body - Parts For Sale - 1st Quarter [Re: Duster 1970 340]
mopar4ya Offline
master

Registered: 01/20/03
Posts: 2559
Loc: western PA
Nice set of small bolt pattern Rallye wheels. All in original untouched condition. Trim rings have some waves, but still pretty nice. $200 plus shipping.

Thanks! Moparts.


Attachments
DSC05934.JPG




Edited by mopar4ya (03/04/18 04:03 PM)
_________________________
Please help save the birds....... Need a complete front clip and 2 nose cones for my Superbirds.

Top
#2461225 - 03/04/18 08:50 PM Steering Column Adapter - POWER to MANUAL Bolt-in [Re: moparts]
Rick_Ehrenberg Offline
top fuel

Registered: 09/22/03
Posts: 1680
Loc: Marlboro, NY, USA
Spline and length adapter to convert power to manual, for any and all 1962-'76 A-Bodies. No other parts needed, not even a coupler swap! Has "power" male splines to fit your existing PS column's coupler body, and "manual" splines to drop onto your "new" manual box. Correct length adaptation, too. Bolts in in minutes! New US-made precision CNC product, US-made steel. One-piece design, no welds to fail.

$112 shipped in US if paid by paypal, $99 if you send a USPS money order.

Contact via e-mail only:

rehrenberg@yahoo.com




Top
#2461601 - 03/05/18 03:19 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
Slap Shot Offline
top fuel

Registered: 11/03/03
Posts: 1607
Loc: Dover,Pa
1970 1971 Plymouth Dodge Mopar A body 340 Duster Dart Demon automatic console with automatic shifter comes with the linkage and factory floor mounting brackets for console and shifter. Pulled from a 1971 Plymouth Duster 340 car. $550 for everything will not split up. York,Pa 17408 717 577-0270


Attachments
00y0y_5hq1Z2m3qSQ_1200x900.jpg



Top
#2462642 - 03/07/18 01:27 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13918
Loc: oak park, il.
1968 and 1969 340, 383 and 440 round unsilenced air cleaner in nice used condition $175.00 (708) 288-2879 Scott


Attachments
parts 3-7-18 011.JPG



Top
#2463884 - 03/09/18 03:21 PM NOS-68-69-barracuda-fbk-REAR-WINDOW-GLASS-SEAL-2841832 [Re: Slap Shot]
ph23vo Offline


Registered: 01/21/03
Posts: 13040
Loc: renton, Washington
ultra rare NOS 68 69 barracuda fastback rear glass seal... 750.00 obro 30.00 ship usa ph23vo@juno.com


Attachments
033.JPG

032.JPG




Edited by ph23vo (03/09/18 03:21 PM)

Top
#2463911 - 03/09/18 04:17 PM Re: NOS-68-69-barracuda-fbk-REAR-WINDOW-GLASS-SEAL-2841832 [Re: moparts]
azvcmc69 Offline
enthusiast

Registered: 03/16/10
Posts: 296
Loc: Arizona
#3515724 Aluminum 10.5inch 4spd. bell housing Nice condition, no cracks / no breaks.
Fits 72-74 A-body small block 3 & 4spd. trans.
Also fits 72-74 E-body small block 3 & 4 spd.
will fit 67-71 if bsb754 ballstud bracket is used.

$150.00 plus shipping

e-mail me for pictures: azvcmc69@gmail.com
I cannot figure out how to post pictures anymore

Top
#2464635 - 03/11/18 08:50 AM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
moparply Offline
master

Registered: 08/27/03
Posts: 5089
Loc: NJ
NOS 1967-71 Emission control valve, excellent condition, $100

Email Kenei@comcast.net


Attachments
image.jpg

image.jpg

image.jpg

image.jpg



Top
#2464782 - 03/11/18 01:35 PM 1969 Barracuda Very Nice Trunk Finish Panel [Re: moparts]
bacaruda Offline
pro stock

Registered: 01/19/03
Posts: 1434
Loc: WV
One very tiny ding below "B". Excellent for driver, need anodize stripped, and redone for show. Dent Wizard can probably remove Ding.

$300 + ship.

Thanks.


Attachments
panel1.JPG

panel2.JPG

panel3.JPG

panel4.JPG



Top
#2465224 - 03/12/18 12:49 PM Re: 1968 Hemi Barracuda Radio Delete plate [Re: bacaruda]
davesmopars Offline
master

Registered: 08/01/04
Posts: 2820
Loc: cheshire, ct
68 69 Barracuda 70 Duster, Dart Rally Dash Radio Delete plate.
Mostly know for the 1968 Hemi Barracuda
Hard part to find in great shape
350.00 plus shipping
Pm me here


Attachments
IMG_E1094.JPG

IMG_E1095.JPG




Edited by davesmopars (03/12/18 03:44 PM)

Top
#2465227 - 03/12/18 12:55 PM 1967 Barracuda 71 Duster Demon Rally Dash Radio Delete Plate [Re: davesmopars]
davesmopars Offline
master

Registered: 08/01/04
Posts: 2820
Loc: cheshire, ct
67 Barracuda 71 Duster, Demon Rally Dash Radio Delete Plate
This one Rally Dash Knob Hole Rally Dash
Hard part to find in great shape
Pm me here
350.00 or best offer plus shipping


Attachments
IMG_E1092.JPG

IMG_E1093.JPG




Edited by davesmopars (03/14/18 11:46 AM)

Top
#2465229 - 03/12/18 01:01 PM 1968 Hemi Barracuda Dart Heater Delete Vent Box [Re: davesmopars]
davesmopars Offline
master

Registered: 08/01/04
Posts: 2820
Loc: cheshire, ct
1968 Hemi Barracuda and Dart NOS Heater Delete Vent Box- In Factory Box
Will also fit 67 to 76 A Bodies
Hard to find, In great shape just dusty
PM me here
1200.00 plus shipping


Attachments
IMG_E1097.JPG




Edited by davesmopars (03/12/18 03:49 PM)

Top
#2466445 - 03/14/18 02:05 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparply]
an8sec70cuda Online   content
I Live Here

Registered: 01/19/03
Posts: 10458
Loc: Marion, South Carolina [><]
2863213 cooling fan for '68-'69 A body w/ 340,383, or 440 engines. Real nice shape, slight surface rust, nothing bad.
$100 shipped in the lower 48.

PM me here is best. Paypal accepted if you cover the fee or send as gift. Shipping included to the lower 48 states ONLY.
Thanks!


Attachments
fan 1-1.jpeg

fan 1-3.jpeg


_________________________
CHIP
'70 hemicuda...8.91 at 150.5 mph street car...Mopar Action feature Dec. '14
'69 road runner 446" w/ Indy SRs
'69 road runner 440-6, 4 speed...Dad's ride
'71 Demon 340 resto project
'01 Ram 2500 QCSB 4x4 Cummins...toy hauler
'16 Grand Caravan SXT...baby hauler

Top
#2467735 - 03/17/18 12:10 PM Re: A Body - Parts For Sale - 1st Quarter [Re: moparts]
RapidusMaximus Offline
top fuel

Registered: 06/04/03
Posts: 1877
Loc: Haslet, Texas
Almost everything you need to convert an A body to 4 speed, what you see in the pics is all I have, missing is some of the shift lever parts and of course all of the clutch, flywheel and related hardware, all of this came with a 67 Dart project I bought and am converting to auto (I need a pedal assy if your converting), the trans is a 23 spline 833 and it turns freely but I do not know the internal condition, feel free to ask questions or for more detailed pics, price is 1000.00 for everything obo pm me here or email alilblacktruckatgmaildotcom, prefer pick up but will ship at buyers expense, thanks!


Attachments
IMG_20180317_105640.jpg

IMG_20180317_105626.jpg

IMG_20180317_105611.jpg


_________________________
1968 Plymouth GTX 440 4 Speed Dana
1967 Small block Dart under construction
1974 Dodge P/U Long Bed Stepside 318 Auto
1975 Jeep CJ5
1994 Turbocharged Fuel Injected Dakota
2016 Dodge Ram Hemi 1500

Top
#2467881 - 03/17/18 07:59 PM 67-69 convertible rear seat [Re: moparts]
rrunner Offline
master

Registered: 11/08/06
Posts: 3404
Loc: S.E. Florida, USA
Solid frames $275 shipping available

Top
#2468163 - 03/18/18 03:03 PM 68 A body 2 dr bench seat [Re: moparts]
383S_Fastback Offline
enthusiast

Registered: 02/29/04
Posts: 227
Loc: Va
Bench seat for 2 dr with fold down arm rest, this was from a 68 Cuda and was recovered in the 68 pattern. Never installed but it has some light scuffs from getting bumped while out of the car. It’s never had any armor all or anything applied to it so it would be easy to change color, does not have seat tracks so you will need to reuse whatever you have. $150. Don’t want to ship, prefer pick up from 22556 zip.
Email fish340s@hotmail or pm here

Thanks!


Attachments
DSCN8731.JPG

DSCN8734.JPG

DSCN8740.JPG


_________________________
'67 & '68 Barracuda FB's
'70 AAR Cuda
'89 Ramcharger 4x4
'06 Ram 2500 CTD 6 spd

...Mopars are always way out back
Between the muddy river and the rusty railroad track
Yeah, the Mopars are always hard to find
But you can always find a few
There’s Cordobas and Furys and Darts and Dusters too
There’s a Diplomat with a Swinger
A new Yorker a Demon and a Scamp
And there’s a 68 Barracuda grill with both headlamps...Slaid Cleaves - Skunk Juice

Top
#2468443 - 03/19/18 12:25 AM A Body - Parts Liquidation Sale [Re: moparts]
MuuMuu101 Offline
I got lucky at Woodward!

Registered: 12/12/10
Posts: 12226
Loc: Covina, Ca
I'm trying to sell some parts to get some extra money for upgrades/fixes to the Dart. A lot of these parts have been sitting for a couple years and I doubt I'll ever need them. The parts are located in SoCal and unless the part is small, I doubt I could ship anything. I will be able to deliver to CPW Spring Fling. I might have some other spare parts here and there from my '68 Dart that I haven't listed. I have a couple of misc strut rods and idler arms and such. I have very limited internet at the moment but pm me if you're interested. I'll post pictures later in the week. The list below is what I have.

1) SB Paxton Supercharger with carburetor SOLD!!! (M1 intake from picture not included)
2) Stock smogger 360 heads $50
3) Used Comp Cam 20-223-3 SOLD!!!
4) A-body V8 radiator with 7 blade fan and shroud $100
5) Std bore 273 block $25 (cannot take to Spring Fling)
6) SBP 8 3/4 axles $75 (both)
7) A-body PS box $150 obo
8) A-body PS Column $150 obo (needs to be opened up as the turn signal switch rotates about 90 degrees before engaging)
9) SBP 8 3/4 Drum Brake Set $100 (Backing Plates and Drums)
10) Again, I have little suspension components here and there that I can let go for $10-20/piece.
11) Mopar Performance Offset Shackles w/ Spring Perches $75.


Attachments
360 Paxton.jpg

10 in Drums.jpg


_________________________

68 Dart GT Project Thread: Linky!

Top
#2469379 - 03/20/18 07:22 PM 1968 Dart seats for sale [Re: MuuMuu101]
maximus Offline
mopar

Registered: 02/21/05
Posts: 645
Loc: MI, Lapeer
Full set of front bench and rear seats. Been in basement for some time. NO FUNKY SMELLS. All foam is soft, no damage to foam. All plastic trim is there. Front cover has tears on drivers side rear is excellent. Gold in color. Local pickup preferred, shipping may get expensive. $100 Can send pics upon request, files to large to post.

Top
#2471382 - 03/24/18 01:54 PM NOS Dart Cuda electric washer bottle in box 2809011...SOLD ! [Re: maximus]
mccannix Offline
master

Registered: 01/20/03
Posts: 4082
Loc: Ontario, Canada
Part number 2809011, this is with the original box as seen in pictures.
Reproductions are pretty good but are more porous and lettering is more faint than this crisp original.
I have been told repro mounting holes are not exact as originals such as this one.
Correct for 67-73 Dart, 70-72 Duster , Demon and 67-69 Barracuda, all with electric operated pump.
SOLD ! Thanks Moparts
Terry


Attachments
plast1.JPG

plast2.JPG

plast4.JPG

plast9a.JPG



Top
#2475268 - 04/01/18 10:24 AM DOOR HINGES [Re: moparts]
Rick_Ehrenberg Offline
top fuel

Registered: 09/22/03
Posts: 1680
Loc: Marlboro, NY, USA
I just scored us a bunch of NEW A-body ('63-‘76) lower door hinges. These are super quality (Oilite bushed, toothed detent wheel, cad plated, nylon-lined torsion bar anchors, etc. One hole (arrow) will need to be drilled out to 1/2" - 3/4" for most applications. Positive hardened steel hinge pin retainer so it can be used on left or right side (i.e., ambidextrous).

Super price: One - $35. 2 for $68. 3 or more: $32.50 each.
Shipping: Up to 6, Priority Mail in USA: $14.00 Export: inquire.

Postal money order preferred; PayPal OK - add 6% to grand total. NYS ship-to address? Add 8% NYS tax.

Please, in your first e-mail, tell me:

> HOW MANY you'd like
> HOW you'd like to pay
> If PayPal, your PayPal e-mail address
> If export, to what country

Do not use moparts PM - please use e-mail only.
rehrenberg@yahoo.com
Thanks,
Rick

Top
#2475280 - 04/01/18 10:34 AM REAR WHEEL BEARINGS Tapered Roller [Re: moparts]
Rick_Ehrenberg Offline
top fuel

Registered: 09/22/03
Posts: 1680
Loc: Marlboro, NY, USA
Complete 17-pc. set of OEM-spec (NOT “GREEN”) correct 8¾” tapered roller rear wheel bearings, retainer, adjuster, seals, press collars, gaskets, etc. Kit includes:



> Two (2) bearing cone/roller assemblies (NOT BALL BEARING CRAP!)
> Two (2) bearing cups ("races")
> Two (2) Press collars
> One (1) Left-side retainer
> One (1) Right-side threaded adjuster (both components)
> Two (2) Inner seals
> Two (2) Outer seals
> Two (2) Retainer foam gaskets
> Two (2) Brake support embossed steel gaskets

$152.50 for the whole deal, plus cost on shipping. PayPal OK, but, as a bonus, if you're in the US and remit via a USPS money order, I will eat the shipping costs!

Please, in your first e-mail, tell me:

> WHERE I'd be shipping to (Zip code or country)
> HOW you'd like to pay

Contact via e-mail only (no PM)...

rehrenberg@yahoo.com

Thanks,

Rick

Top
Page 1 of 10 1 2 3 9 10 >

Advertisement
Sponsored Link
Forum Stats
25,260 Registered Members
32 Forums
189,026 Topics
2,204,547 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
67-9 barracuda doors
by cudaman1969
04/26/18 01:18 PM
340 solid flat tappet cam
by cudaman1969
04/26/18 01:16 PM
Happy 4-26 Day
by hemi-itis
04/26/18 01:05 PM
Turks-Drag Pak Bullet
by 64HemiSavoy
04/26/18 12:55 PM