Page 9 of 9 < 1 2 3 4 5 6 7 8 9
Topic Options
#2061192 - 04/24/16 11:45 PM Re: Another Gen-III Hemi E-body swap [Re: GoodysGotaCuda]
ntstlgl1970 Offline
mopar

Registered: 05/21/07
Posts: 535
Loc: Sac, CA, USA
The ms3 is supposed to run it via pwm on the main board injector output but I don't think the frequency is high enough, still doing research...this alternator uses a positive voltage signal vs. the older ones that ground the field

Top
#2063806 - 04/29/16 01:05 AM Re: Another Gen-III Hemi E-body swap [Re: ntstlgl1970]
ntstlgl1970 Offline
mopar

Registered: 05/21/07
Posts: 535
Loc: Sac, CA, USA
I weighed the car tonight, the weight balance front to rear is better than I thought it would be an improves with me in the car


Attachments
image.jpeg



Top
#2063928 - 04/29/16 10:21 AM Re: Another Gen-III Hemi E-body swap [Re: ntstlgl1970]
Mopar Mitch Offline
super stock

Registered: 01/17/10
Posts: 996
Loc: NW Chicago suburban area
ntstlgl1970 -- Did you disconnect the sway bar end links when you did the weight scaling? Try doing that and then re-weigh as you might find differences.... then re-attach the sway bar end links equally by shimming each end, assuming they are typical stock-style (pending your sway bar end link designs). Also, be certain tire pressures are where you want them to be, and of course with driver's weight included at the driver's seat.
_________________________
Mopar Mitch "Road racers and autocrossers go in deeper and come out harder!"... and rain never stops us from having fun with our cars... in fact, it makes us better drivers! Check out MOPAR ACTION MAGAZINE, August 2006 issue for feature article and specs on my autocross T/A!

Top
#2064498 - 04/30/16 12:53 AM Re: Another Gen-III Hemi E-body swap [Re: ntstlgl1970]
ntstlgl1970 Offline
mopar

Registered: 05/21/07
Posts: 535
Loc: Sac, CA, USA
I did not disconnect the end links since I was interested in seeing the total weight and f/r balance. I will try that though

Thanks!

Top
#2404849 - 11/17/17 03:59 AM Re: Another Gen-III Hemi E-body swap [Re: ntstlgl1970]
HP2 Offline
mopar

Registered: 09/25/04
Posts: 463
Loc: Right here
Any updates? I'm curious as hell, just started a 6.1 swap!
_________________________
70 'Cuda vert 340 clone, In Violet, white interior and top
70 'Cuda project car
70 Sport Fury 440 2dr HT, will get that 6.1 Hemi...
71 Charger Super Bee - 383/727
72 Charger "Sabotage" - 440/727 - Street/Strip

Top
#2409041 - 11/26/17 08:15 AM Re: Another Gen-III Hemi E-body swap [Re: ntstlgl1970]
AeroMonte Offline
master

Registered: 11/27/03
Posts: 5656
Loc: S.E. Missouri
I'm starting a Hellcat swap into a 71 Cuda right now too. lots of learning to do

Top
#2409190 - 11/26/17 02:28 PM Re: Another Gen-III Hemi E-body swap [Re: ntstlgl1970]
Frankenduster Offline
Moparts proctologist

Registered: 02/15/10
Posts: 14907
Loc: Granite Bay CA
Eric is still alive but he is not as active here or elsewhere.

Top
#2420808 - 12/19/17 12:32 AM Re: Another Gen-III Hemi E-body swap [Re: Frankenduster]
ntstlgl1970 Offline
mopar

Registered: 05/21/07
Posts: 535
Loc: Sac, CA, USA
I haven’t checked in for a while, but I’m still around. Need to get a pro to tune the engine and finish the interior


Edited by ntstlgl1970 (12/19/17 12:34 AM)

Top
Page 9 of 9 < 1 2 3 4 5 6 7 8 9

Advertisement
Sponsored Link
Forum Stats
25,078 Registered Members
32 Forums
185,719 Topics
2,159,194 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Can't find "correct" 70 Charger belt moulding clips
by sunroof_charger
01/21/18 08:51 PM
What would you pay for this duster?
by bballfan1
01/21/18 08:10 PM
negative battery cable
by raybee
01/21/18 07:48 PM
What 30 yr old gas in a tank looks like
by AARCONV
01/21/18 06:26 PM