Page 1 of 4 1 2 3 4 >
Topic Options
#2420308 - 12/18/17 10:51 AM Harland Sharp Rocker Sale Interest
CompWedgeEngines Offline
master

Registered: 11/03/04
Posts: 3449
Loc: Syracuse,NY
I am gauging the interest in running my Harland Sharp Rocker Sale again. I had done it annually for about 4 or 5 years, and haven't in the last couple, as I have just been too busy.I would simply like to get an idea, of how many people would SERIOUSLY be interested in buying a set of H/S rockers at this point.Its a lot of work on my end, so I need it to be worth my time so to speak.The pricing has always been about as good as you would ever get. I rarely go on the Question and Answer, but will post the same there, as I mostly know people from this Race side. Mods, if you could leave up a couple days, i would appreciate it. I will post on the deals section if it happens. Thank You Todd
_________________________
RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Top
#2420316 - 12/18/17 10:57 AM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
hemi_doug Offline
master

Registered: 01/21/03
Posts: 3438
Loc: Northern N.J.
I would be in for a set to use with Victor BB heads.
_________________________

71 440-6 4spd & 69 Hemi 4spd

Top
#2420342 - 12/18/17 11:43 AM Re: Harland Sharp Rocker Sale Interest [Re: hemi_doug]
301v Online   content
member

Registered: 09/06/17
Posts: 14
Loc: Kentucky
Was getting ready to get another new set of T&Ds For the new heads but would go with harland sharpe for right deal.. Will be 440-1 heads.

Top
#2420358 - 12/18/17 12:20 PM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
70dusterjohn Offline
pro stock

Registered: 08/08/06
Posts: 1526
Loc: Deerfield, Ohio
I’d be in for a set of 440-1 heads ..
_________________________
70 Duster, best 9.80

Top
#2420901 - 12/19/17 10:00 AM Re: Harland Sharp Rocker Sale Interest [Re: 70dusterjohn]
pittsburghracer Offline
Slowride

Registered: 02/02/05
Posts: 12275
Loc: PA.
BUMP!!!!!!!!!!!
_________________________
1970 Duster
Edelbrock headed 408
6.143@110.89 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
6.001@113.27mph
9.44@138.23

Untitled by John Cadamore, on Flickr





Top
#2420903 - 12/19/17 10:10 AM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
mopar65 Offline
master

Registered: 01/02/04
Posts: 3700
Loc: Central Missouri Fort Leonard...
I would intrested in a set for my magnum 360
_________________________
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Top
#2420921 - 12/19/17 10:55 AM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
1974 474 Duster Offline
mopar

Registered: 01/20/08
Posts: 611
Loc: Rochester, PA (near Pittsburgh...
I also need a set for -1 heads? What kind of price are you looking at for them
Ken Michalik

Top
#2420986 - 12/19/17 01:06 PM Re: Harland Sharp Rocker Sale Interest [Re: 1974 474 Duster]
galen Offline
super stock

Registered: 05/02/09
Posts: 753
Loc: Missouri
Todd I was getting ready to order a set of S70015KE or S70016KE for trick flow 270s. Also interested in a set of morel bushing lifters if they will work in a stock block. When you have a minute please pm me your phone number.

Top
#2421195 - 12/19/17 08:17 PM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
493_DART Offline


Registered: 07/11/04
Posts: 4321
Loc: ON A PREVOST
price on a 1.6 set for BB ?

Top
#2421361 - 12/20/17 07:49 AM Re: Harland Sharp Rocker Sale Interest [Re: 493_DART]
CompWedgeEngines Offline
master

Registered: 11/03/04
Posts: 3449
Loc: Syracuse,NY
Hey guys, I'll give it a few more days to soak in, and see where we are. Over 750 views, and about 8 or 9 interested, so its iffy at this point, but hang tight, lets see what happens.
_________________________
RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Top
#2421397 - 12/20/17 09:27 AM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
markz528 Offline
master

Registered: 01/20/03
Posts: 3319
Loc: Milford, OH
Sounds like it may be prudent for me to go with the E style for my new Trickflow 270 heads. You can put me down.
_________________________
67 Coronet 500 9.610 @ 139.20 mph
67 Coronet 500 (street car) 13.300 @ 101.75 mph
69 GTX (clone) - build in progress......

Top
#2422398 - 12/22/17 03:33 PM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
68roadrunner Offline
super stock

Registered: 06/25/09
Posts: 819
Loc: ky
-1 heads

Top
#2422553 - 12/22/17 11:24 PM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
sr440 Offline


Registered: 04/02/15
Posts: 7
Loc: Sydney Australia
I would be interested in a set to suit Victor heads

Top
#2422636 - 12/23/17 10:22 AM Re: Harland Sharp Rocker Sale Interest [Re: sr440]
CompWedgeEngines Offline
master

Registered: 11/03/04
Posts: 3449
Loc: Syracuse,NY
SALE WILL BE HAPPENING. Will get it all hammered out in between Christmas and New Years, and contact everyone. Thanks
_________________________
RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Top
#2422673 - 12/23/17 12:11 PM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
mopar dave Offline
master

Registered: 01/04/07
Posts: 5334
Loc: flint michigan
HS will drill those for pushrod oiling if need be at no extra charge. Great company to deal with.

Top
#2422743 - 12/23/17 04:04 PM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
markz528 Offline
master

Registered: 01/20/03
Posts: 3319
Loc: Milford, OH
Originally Posted By CompWedgeEngines
SALE WILL BE HAPPENING. Will get it all hammered out in between Christmas and New Years, and contact everyone. Thanks


Awesome! Thank you very much!
_________________________
67 Coronet 500 9.610 @ 139.20 mph
67 Coronet 500 (street car) 13.300 @ 101.75 mph
69 GTX (clone) - build in progress......

Top
#2422818 - 12/23/17 06:31 PM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
roadrunner34 Offline
member

Registered: 11/07/07
Posts: 21
Loc: ma.
A set of 1.6 for -1's.

Top
#2425155 - 12/28/17 08:50 PM Re: Harland Sharp Rocker Sale Interest [Re: roadrunner34]
CompWedgeEngines Offline
master

Registered: 11/03/04
Posts: 3449
Loc: Syracuse,NY
OK, folks, I'll be PM-ing everyone who has replied within a couple days. I will provide my email to send request to. I will only do orders that have been emailed, so please, send me a note after I PM you here. I will put specifics in an email once you contact me. Mods, you can send this over to DEALS section if you want. Thanks
_________________________
RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Top
#2425255 - 12/29/17 05:54 AM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
tboomer Online   happy



Registered: 01/20/03
Posts: 21780
Loc: The frozen wasteland of Iowa
Cool deal Todd! Thanks for giving our members a discount! I will move this thread at the end of the day to the Hot deals and new products section. wave
_________________________
Some people in our midst shouldn't own a Mopar.
Stick to your exotic import junk.

Top
#2425464 - 12/29/17 03:58 PM Re: Harland Sharp Rocker Sale Interest [Re: CompWedgeEngines]
Whompin_Wedge Offline
mopar

Registered: 07/12/10
Posts: 539
Loc: COLUMBUS, OH
Can I just get a couple sets of shafts?

Or if not pricing on a set for B1 Originals?

Thanks!!

Casey FJ
_________________________
NOSTALGIA SUPER STOCK Powered by B1 557" www.buckeyerace.com NHRA/IHRA Stockers, Super Stockers, and Nostalgia Super Stock Racers.

Top
Page 1 of 4 1 2 3 4 >

Advertisement
Sponsored Link
Forum Stats
25,144 Registered Members
32 Forums
186,687 Topics
2,171,992 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
TTI 2.5" X pipe exhaust/Gear Vendors - E body
by BcudaChris
02/20/18 04:07 PM
New to the C-Body scene
by jim6346
02/20/18 04:03 PM
1973 Plymouth Roadrunner H Code Mopar
by FM3_1970
02/20/18 02:56 PM
Superformance gaskets
by Biginchmopar
02/20/18 02:29 PM