Re: Comp Cams help
[Re: Racer68]
#2417530
12/12/17 07:27 PM
12/12/17 07:27 PM
|
Joined: Mar 2005
Posts: 1,581 N/E, Michigan
RATTRAP
pro stock
|
pro stock
Joined: Mar 2005
Posts: 1,581
N/E, Michigan
|
I need to call CompCams. I'd like to speak to a "hemi guy". Any recommendations? Why would you call Comp Cams for a Hemi Guy?
|
|
|
Re: Comp Cams help
[Re: rickraw]
#2417615
12/12/17 09:57 PM
12/12/17 09:57 PM
|
Joined: Dec 2013
Posts: 4,663 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,663
Wichita
|
Good luck! I went to the trouble of filling out all the specs online to get them to recommend a cam for my 505. No one replied. Called the tech line and got what sounded like a 15 year-old. His "recommendation" was so far off base I laughed.
'63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
Re: Comp Cams help
[Re: Racer68]
#2417999
12/13/17 04:12 PM
12/13/17 04:12 PM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
Thanks a lot for the name. I'll ask for him.
And no, I'm not looking for Comp to design a cam for me. I had a question for them about cores. Scott is not with Comp Cams. Scott does his own stuff. Not sure who 's cam cores he uses, but he doesnt work for Comp. Last I knew, I think he was involved with a Buick or Olds shop maybe? ( still does Mopars I am sure) You will most likely be sadly disappointed if you call Comp directly. You will have trouble getting person and also the right person.I would strongly suggest calling a shop that deals with Comp a lot directly like Dwayne Porter or someone. They have a better list of " who's who" so to speak. If you call yourself, its a 50/50 chance of getting correct answer. Unfortunately, the tech lines, well,,, arent always very good. Not sure what you are doing, but there is always Bullet, Cam Motion and LSM that do a lot of stuff with cores. The Comp group has purchased Crane Cams, so not sure if that helps or hurts their efforts.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: Comp Cams help
[Re: CompWedgeEngines]
#2418002
12/13/17 04:17 PM
12/13/17 04:17 PM
|
Joined: Aug 2003
Posts: 43,096 Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 43,096
Bend,OR USA
|
When did they buy Crane? Do they still own Lunati?
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
Re: Comp Cams help
[Re: CompWedgeEngines]
#2418003
12/13/17 04:18 PM
12/13/17 04:18 PM
|
Joined: Jan 2003
Posts: 13,351 Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,351
Marion, South Carolina [><]
|
Dwayne Porter (Fast68plymouth) is the man you need to talk to. 802-951-1955 He owns Porter Racing Heads and deals directly w/ Comp Cams. I couldn't be happier w/ the cams he's spec'd for me. My experience w/ Scott Brown wasn't so good.
CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax
|
|
|
Re: Comp Cams help
[Re: an8sec70cuda]
#2418068
12/13/17 05:52 PM
12/13/17 05:52 PM
|
Joined: Mar 2006
Posts: 2,675 Mt. Eden Ky.
Hemi Allstate
master
|
master
Joined: Mar 2006
Posts: 2,675
Mt. Eden Ky.
|
Dwayne Porter (Fast68plymouth) is the man you need to talk to. 802-951-1955 He owns Porter Racing Heads and deals directly w/ Comp Cams. I couldn't be happier w/ the cams he's spec'd for me. My experience w/ Scott Brown wasn't so good. X2 Talk to Dwayne. The cam I bought from Barton was a disappointment. Mark
|
|
|
|
|