Previous Thread
Next Thread
Print Thread
'02 Dakota caliper pins #2410225
11/28/17 06:16 PM
11/28/17 06:16 PM
Joined: Jul 2004
Posts: 3,799
Arlington, Texas
B
bobby66 Offline OP
master
bobby66  Offline OP
master
B

Joined: Jul 2004
Posts: 3,799
Arlington, Texas
What size are the threads on the front caliper pins(bolts) on a 2002 Dakota. I've heard 9x1.25 but I wanted another opinion.

Re: '02 Dakota caliper pins [Re: bobby66] #2410466
11/29/17 01:07 AM
11/29/17 01:07 AM
Joined: Mar 2007
Posts: 851
Southeast Pa.
SALEM1912 Offline
super stock
SALEM1912  Offline
super stock

Joined: Mar 2007
Posts: 851
Southeast Pa.
Are you looking for the pins or need to retread the spindle?
Pins should be 04886075AA

Re: '02 Dakota caliper pins [Re: SALEM1912] #2410567
11/29/17 08:11 AM
11/29/17 08:11 AM
Joined: Jul 2004
Posts: 3,799
Arlington, Texas
B
bobby66 Offline OP
master
bobby66  Offline OP
master
B

Joined: Jul 2004
Posts: 3,799
Arlington, Texas
Originally Posted By SALEM1912
Are you looking for the pins or need to retread the spindle?
Pins should be 04886075AA


Got the pins, looking for the correct heli-coil or keenesert to repair the spindle.

Re: '02 Dakota caliper pins [Re: bobby66] #2411093
11/30/17 01:51 AM
11/30/17 01:51 AM
Joined: Jul 2004
Posts: 3,799
Arlington, Texas
B
bobby66 Offline OP
master
bobby66  Offline OP
master
B

Joined: Jul 2004
Posts: 3,799
Arlington, Texas
Bump.

Re: '02 Dakota caliper pins [Re: bobby66] #2411124
11/30/17 03:07 AM
11/30/17 03:07 AM
Joined: Aug 2003
Posts: 954
garnett kansas
rhad Offline
super stock
rhad  Offline
super stock

Joined: Aug 2003
Posts: 954
garnett kansas
some years back i bought a repair for disc threads,its a sort of epoxy,you put it on a bolt that is oiled or greased and screw it in,wait till it sets up then remove the bolt and the threads are there good as new,forgot what its called,i used it on a ford compact


my ladder of success is missing some rungs
Re: '02 Dakota caliper pins [Re: rhad] #2411529
11/30/17 11:24 PM
11/30/17 11:24 PM
Joined: Mar 2007
Posts: 851
Southeast Pa.
SALEM1912 Offline
super stock
SALEM1912  Offline
super stock

Joined: Mar 2007
Posts: 851
Southeast Pa.
I will ck tomorrow at work I have a kit and used it many times. Might ck NAPA for this set up; https://www.ebay.com/itm/Disc-Brake-Cali....m4383.l4275.c1
Tom

Re: '02 Dakota caliper pins [Re: bobby66] #2411604
12/01/17 01:05 AM
12/01/17 01:05 AM
Joined: Feb 2012
Posts: 637
SoMd, USA
1
135sohc Offline
mopar
135sohc  Offline
mopar
1

Joined: Feb 2012
Posts: 637
SoMd, USA
If the damage is done, then its done. These can sometimes clean things up and make it work. Lang Tools

Re: '02 Dakota caliper pins [Re: bobby66] #2411908
12/01/17 07:10 PM
12/01/17 07:10 PM
Joined: Jul 2004
Posts: 3,799
Arlington, Texas
B
bobby66 Offline OP
master
bobby66  Offline OP
master
B

Joined: Jul 2004
Posts: 3,799
Arlington, Texas
I may just drill o/s and tap to 10x1.5. 10MM shoulder bolts are pretty close in shaft diameter. Thanks for the help.







Powered by UBB.threads™ PHP Forum Software 7.7.1