Previous Thread
Next Thread
Print Thread
Page 12 of 48 1 2 10 11 12 13 14 47 48
Re: Modern Bullitt build [Re: Black 69 Beeper] #1951025
11/14/15 12:46 PM
11/14/15 12:46 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
Pulled the motor back out so I could modify the inner fender to make room for one of the brake lines off the master cylinder.
Thanks
Pat






























Re: Modern Bullitt build [Re: Keepat] #1951708
11/15/15 04:25 PM
11/15/15 04:25 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
Welded the seams on the inner fender covers, coated them with bed liner and installed a rubber gasket I got from McMaster Carr. Now they should keep most of the water and dirt out.
Thanks
Pat














Re: Modern Bullitt build [Re: Keepat] #1954609
11/20/15 12:00 AM
11/20/15 12:00 AM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
I bent the right front brake line to run along the seam between the firewall and floor. This is much cleaner than the original run in the middle of the firewall.
Thanks
Pat





Re: Modern Bullitt build [Re: Keepat] #1954779
11/20/15 10:20 AM
11/20/15 10:20 AM
Joined: Jan 2012
Posts: 64
Michigan
M
mopar4don Offline
member
mopar4don  Offline
member
M

Joined: Jan 2012
Posts: 64
Michigan
up Looks GREAT Pat

Re: Modern Bullitt build [Re: mopar4don] #1954917
11/20/15 04:08 PM
11/20/15 04:08 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
Originally Posted By mopar4don
up Looks GREAT Pat


Thank You Don!

Re: Modern Bullitt build [Re: Keepat] #1955862
11/22/15 03:41 PM
11/22/15 03:41 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
Finished the left front brake line and started on the rear brake line. Fuel lines are next.
Thanks
Pat


















Re: Modern Bullitt build [Re: Keepat] #1959006
11/27/15 11:14 PM
11/27/15 11:14 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
It’s not a ported head intake runner, but it will have fuel running through it. What do you think it is?


Answer will be in the next post
Thanks
Pat

Re: Modern Bullitt build [Re: Keepat] #1959025
11/27/15 11:44 PM
11/27/15 11:44 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
I needed to make a large fuel pass-through in the trans cross member as there will be two ½” fuel lines. I used part of the rear frame rail I cut off last winter to make the reinforcement for the hole I put in the cross member. Now I can bend full length fuel line to fit.
Thanks
Pat






























Re: Modern Bullitt build [Re: Keepat] #1959961
11/29/15 11:04 PM
11/29/15 11:04 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
I installed the fuel tank so I could mark the trunk access for the fuel pump and sending unit. The tank has a EFI pump inside and adding the trunk access will make it easy check or remove without dropping the tank.
Thanks
Pat


























Re: Modern Bullitt build [Re: Keepat] #1961353
12/01/15 11:59 PM
12/01/15 11:59 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
The fuel tank access cover is done, now I can bend the fuel lines
Thanks
Pat









Re: Modern Bullitt build [Re: Keepat] #1962750
12/03/15 11:37 PM
12/03/15 11:37 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
I received the new RMS rear sway bar kit today just in time before I bend the fuel lines. I will locate the sway bar mounts first, so I can route the lines around them. This kit has been in the works for over a year and it was worth the wait! It is a great looking kit and very reasonably priced!
Thanks
Pat



Re: Modern Bullitt build [Re: Keepat] #1964079
12/06/15 12:02 AM
12/06/15 12:02 AM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
I put the rear back in the car so I could fit the new RMS sway bar. The sway bar kit fit great after I quickly figured out it is a rear mount system. All the RMS sway bar prototypes I saw at Carlisle had front mounts. Bill said the kit will work with TTI 3” exhaust and it does look to have more than enough room.
Thanks
Pat















Re: Modern Bullitt build [Re: Keepat] #1964341
12/06/15 01:40 PM
12/06/15 01:40 PM

S
Superfreak
Unregistered
Superfreak
Unregistered
S



Nice work.

Re: Modern Bullitt build [Re: ] #1964528
12/06/15 08:15 PM
12/06/15 08:15 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
Originally Posted By Superfreak
Nice work.


Thank you sir!

Re: Modern Bullitt build [Re: Keepat] #1969246
12/14/15 12:59 AM
12/14/15 12:59 AM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
I almost finished the fuel lines this weekend. Just one S/S line left to make and a few hose.
Thanks
Pat


















Re: Modern Bullitt build [Re: Keepat] #1973166
12/20/15 11:24 AM
12/20/15 11:24 AM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
I finished the rear fuel lines and all that is left is the Much II tank vent system.
Thanks
Pat












Re: Modern Bullitt build [Re: Keepat] #1975446
12/23/15 11:17 PM
12/23/15 11:17 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
Before removing the fuel line I made an AC condensation drain and fire wall pass-through.
Thanks
Pat















Re: Modern Bullitt build [Re: Keepat] #1976021
12/25/15 08:11 AM
12/25/15 08:11 AM
Joined: Nov 2004
Posts: 418
P
PasiR Offline
mopar
PasiR  Offline
mopar
P

Joined: Nov 2004
Posts: 418
Very nice work and details - I like this!

Re: Modern Bullitt build [Re: PasiR] #1976321
12/25/15 09:02 PM
12/25/15 09:02 PM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
Originally Posted By PasiR
Very nice work and details - I like this!


Thank you sir, I appreciate your comment!
I hope you have a Great holiday!
Pat

Re: Modern Bullitt build [Re: Keepat] #1976899
12/27/15 01:41 AM
12/27/15 01:41 AM
Joined: Feb 2013
Posts: 676
Maryland
K
Keepat Offline OP
mopar
Keepat  Offline OP
mopar
K

Joined: Feb 2013
Posts: 676
Maryland
Installed the II Much vent canister, starting with punching out a 2 ½” hole where there was a 1 ¾” body plug using a knockout punch tool. This is a clean way to put holes into steel panels. Then I bent a 3/8” S/S vent line running downhill to the two tank vent fittings. I step closer to starting the bodywork.
Thanks
Pat
























Page 12 of 48 1 2 10 11 12 13 14 47 48






Powered by UBB.threads™ PHP Forum Software 7.7.1