Page 7 of 9 < 1 2 3 4 5 6 7 8 9 >
Topic Options
#2395873 - 10/31/17 01:27 AM Re: For Sale - Race Parts - 4th Quarter [Re: Moparguy383]
Moparguy383 Offline
super stock

Registered: 01/20/03
Posts: 936
Loc: Cumberland, MD
New Derale transmission cooler. Part number 13751, 9x9x1.25 inches, -6 AN inlet & outlet. Would not fit my application and I waited to long to return it. My loss is your gain. $50 plus shipping. I will take Paypal if it is sent as a gift.

Email me moparguy383@hotmail.com for more pictures or information.


Attachments
20170407_193352.jpg

20170407_193435.jpg


_________________________
moparguy383@hotmail.com

Top
#2397127 - 11/01/17 11:29 PM Re: For Sale - Race Parts - 4th Quarter [Re: gtea1901]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13450
Loc: oak park, il.
426 HEMI single 4 BBL. intake manifold taken off a crate HEMI, excellent condition. $375.00 (708)288-2879 Scott


Attachments
parts 5-1-17 023.JPG

parts 5-1-17 024.JPG

parts 5-1-17 025.JPG



Top
#2397391 - 11/02/17 02:29 PM A12 Six Pack Carbs [Re: dsd70bee]
70sixpkRT Offline


Registered: 01/20/03
Posts: 3061
Loc: South San Francisco, Ca
I have a set of Six Pack manual carbs for an A12. Front: Date code 1229 part# 4393. Center: Date code 1229 part# 4391 for manual. Rear: Date code 0929 part# 4394. All 3 carbs are untouched and in good condition.
$1600 + shipping.


Attachments
4391.jpg

4393.jpg

4394.jpg

carbset.jpg


_________________________

4-speed
3:54 Dana
13.01 @107.93 with street tires (not hooking up)

Top
#2397576 - 11/02/17 09:19 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
H4E2M6I Offline
super stock

Registered: 03/07/04
Posts: 946
Loc: Belvidere,IL N.W. Chicago ...
1965 New Old Stock (NOS) Magnesium Hemi crossram with original 3116 Holley 770 cfm carbs, adaptors and linkage ready to bolt on. This is a perfect vintage NOS Mag manifold and never bolted on, $5500. Or I will separate, Mag manifold only is $4000, Carbs $2000 Call only if you are a serious buyer. Not interested in any trades. 815-218-1733


Attachments
008.JPG




Edited by H4E2M6I (11/05/17 10:36 PM)

Top
#2397580 - 11/02/17 09:25 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
H4E2M6I Offline
super stock

Registered: 03/07/04
Posts: 946
Loc: Belvidere,IL N.W. Chicago ...
1963 Perfect original, not reproduction, Max Wedge cross ram manifold with screw in plugs and all linkage, bolts, and Factory reman AFB carbs, no air cleaners or filters. $3500 Calls only if serious, not interested in trades. 815-218-1733


Attachments
002.JPG




Edited by H4E2M6I (11/05/17 02:21 PM)

Top
#2397778 - 11/03/17 09:05 AM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
Sweet5ltr Offline
member

Registered: 04/02/12
Posts: 39
Loc: Florida
Lunati B/RB Custom Solid Lifter Turbo Camshaft & Lifter set - Nitrided - .526/.546 - 235/243* @ .050 - 115 LSA (.016 lash)

Just broken in, we went N/A after we found another engine issue. Lifters are matched. Cost over $400 earlier this year.

$200 - shipped


Edited by Sweet5ltr (11/03/17 09:07 AM)
_________________________
1969 Plymouth Road Runner (440 w/ Boost! RIP) now a low-deck 470 with hotchkis suspension, nascar boom tube exhaust, & big brakes.

Top
#2398531 - 11/04/17 06:40 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
67coronetman Offline
super stock

Registered: 06/12/08
Posts: 749
Loc: Maryville tn



5 electric fuel pumps


What I have for sale is 5 electric fuel pumps two of them are holly blue pumps the other three are off brands but one of them works perfect the others can be rebuilt and would be good pumps or used for parts I am asking $100 for all 5 plus shipping
_________________________
Old car are me......

Top
#2398541 - 11/04/17 07:07 PM Re: For Sale - Race Parts - 4th Quarter [Re: Moparguy383]
boatracer572 Offline
super stock

Registered: 09/17/03
Posts: 951
Loc: San Jose Ca.
Indy alum block, all the machine work done by S&S (rick santos)
decks trued, che lifter bushings,aligh honed,pushrod oil,55mm roller cam bearings 4.500" bore,block o-ringed.....new $5700 jesel belt drive in original box installed and used once $900..
assortment of 55mm predator/hemi cams $500 ea. make me an offer...


Attachments
10860883_10204648932495481_7156854151627798704_o.jpg



Top
#2399036 - 11/05/17 05:47 PM Mopar/World Wedge Aluminum RB Block [Re: moparts]
SILVER67 Offline
super stock

Registered: 02/04/06
Posts: 728
Loc: Liverpool, NY
Brand new World Wedge Aluminum block
Never been used
4.49 bore
10.72 deck height
440 main
STD cam location
Bronze lifter bushings .902-.903
Steel nodular iron caps
GM and Mopar bellhousing
No cam bearings
No main bearings

$5,000
NO PAYPAL at all !!
Plus shipping or delivery
Additional photo’s available
dlawd@aol.com
315-657-2808 call/text
Syracuse, NY
Certified check or money order only
NO PAYPAL at all !!



Attachments
image.jpg




Edited by SILVER67 (11/16/17 09:30 PM)
_________________________
Competition Wedge Engines Brewerton, NY

Top
#2399042 - 11/05/17 06:00 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
1964maxwedge Offline
member

Registered: 05/02/04
Posts: 61
Loc: Wisconsin
Sold Cheetah valve 17156 727 reverse pattern full manual 150.00 plus shipping .


Edited by 1964maxwedge (11/07/17 09:24 PM)

Top
#2399044 - 11/05/17 06:05 PM Re: For Sale - Race Parts - 4th Quarter [Re: boatracer572]
joez Offline
mopar

Registered: 01/19/03
Posts: 467
Loc: PA
BB mopar 528” low deck rotating assy. 4.505” bore, 4.15” stroke MP crank with B mains and mopar rod journals p5249337. 6.500 Grp rods with 1.031 pin 35 passes. 1 set used diamond pistons 1.360 pin height, 12 new diamond pistons, .043/.043/3/16, coated skirts, vert gas ports. Two sets used venolia rods with hemi pin and 12 used venolia pistons all for b1mc or b1 heads. $1,500 obo

Weld Prostar 15x10 with 3.5" back spacing. 4.5" bolt pattern. Drilled for screws. $200 obo

Straightline performance roller BB roller nitrous cam. See pic of card. $100


Attachments
IMG_4906.JPG

IMG_5236.JPG

IMG_5235.JPG

IMG_5234.JPG



Top
#2399071 - 11/05/17 06:56 PM Re: For Sale - Race Parts - 4th Quarter [Re: 1964maxwedge]
bremotorsports Offline
top fuel

Registered: 08/22/03
Posts: 2014
Loc: New Jersey Bada Bing
TCI Transmission Shield for 904/998 Automatic

New, never used!!! Complete with all hardware.

139.00 plus shipping.

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred.


Attachments
110517 00009.JPG


_________________________

Top
#2399122 - 11/05/17 08:44 PM Subject: Re: For Sale - Race Parts - 4th Quarter [Re: bremotorsports]
hankcrank Offline
member

Registered: 02/14/11
Posts: 123
Loc: B.C. Canada


2.28 planetary gear set for 727
Was bought to tame down the launch on my S/G Arrow. Still in great shape. $350 plus shipping.E mail for pics and more info.


Attachments
Picture 014.jpg

Picture 015.jpg




Edited by hankcrank (11/11/17 10:55 AM)

Top
#2399131 - 11/05/17 09:17 PM Re: For Sale - Race Parts - 4th Quarter [Re: bremotorsports]
bremotorsports Offline
top fuel

Registered: 08/22/03
Posts: 2014
Loc: New Jersey Bada Bing
NOS Mopar Mini Starter

This is NOT an aftermarket piece. Used only for mockup purposes.

100.00 plus shipping. SOLD!! SOLD!! SOLD!!

Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cellular

PayPal preferred.



Attachments
100117 00000.JPG




Edited by bremotorsports (11/11/17 09:43 AM)
_________________________

Top
#2399132 - 11/05/17 09:18 PM Re: For Sale - Race Parts - 4th Quarter [Re: bremotorsports]
bremotorsports Offline
top fuel

Registered: 08/22/03
Posts: 2014
Loc: New Jersey Bada Bing
Genuine Mopar Part!!!


Attachments
100117 00001.JPG


_________________________

Top
#2399213 - 11/06/17 04:13 AM Re: For Sale - Race Parts - 4th Quarter [Re: bremotorsports]
493_john Offline
pro stock

Registered: 03/19/05
Posts: 1219
Loc: Chesterfield Twp. Mi.
T & D complete rocker setup for Indy/Predator heads. 1.8 ratio, for pushrod oiling. bought from Moparts member Efidart. rockers have 15 dyno pulls/like new. all hardware and brackets new.

$1350

John pm or call/text 586-222-2728
_________________________
1.27 60ft on Radials 9.11 @ 147 3410 lbs.

Top
#2399857 - 11/07/17 07:34 AM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
dodgedifferent2 Offline
member

Registered: 01/16/07
Posts: 60
Loc: South western, Ontario
Closed chamber race w2 heads "693" casting number. 
68cc
Currently 2.02 IN
1.6 EXH
Comes with brand new in box ferrea 2.08 intake valves 3/8 diameter.
These are tall valves.
Mopar battleship red stripe springs. p5249849
10 degree valve locks
Brand new Ptfv valve seals were installed.
Light port work with the mopar porting templates.

Comes with Harland sharp 1.6 ratio rockers. Not pictured but they are lightly used.

W2 dual plane intake is also available for the heads.
Awesome stroker street head.

Asking $2300 for everything plus shipping.

Top
#2400067 - 11/07/17 03:11 PM NOS Stewart Warner 0-15 psi Fuel Pressure Gauge [Re: dodgedifferent2]
rarefish Offline
pro stock

Registered: 01/19/03
Posts: 1344
Loc: New York
I selling this New Vintage Stewart Warner Mechanical Fuel Pressure Gauge.
It was bought new around the mid 70's. Has never been installed.
Has the 2-5/8" face.
Made in USA

....SOLD.....

Payment by a US Postal Money Order or by Paypal.


Attachments
100_4613.JPG




Edited by rarefish (11/12/17 07:36 PM)

Top
#2400742 - 11/08/17 08:03 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
H4E2M6I Offline
super stock

Registered: 03/07/04
Posts: 946
Loc: Belvidere,IL N.W. Chicago ...
426 Hemi magnesium blower intake manifold for the 6/71 8/71 14/71, is NOS and in perfect condition. $800 calls only, 815-218-1733


Attachments
001.JPG

002.JPG

003.JPG



Top
#2400763 - 11/08/17 08:32 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
H4E2M6I Offline
super stock

Registered: 03/07/04
Posts: 946
Loc: Belvidere,IL N.W. Chicago ...
Magnesium 8/71 fresh from Littlefield in Cal. polished and Dowe 7 coated. Unused and ready to bolt on, just add the oil for the gears. $4600 Calls only please, 815-218-1733


Attachments
004.JPG

005.JPG

006.JPG



Top
Page 7 of 9 < 1 2 3 4 5 6 7 8 9 >

Advertisement
Sponsored Link
Forum Stats
24,969 Registered Members
32 Forums
185,452 Topics
2,149,418 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
70 Cuda Grille and Grille Molding Options
by rss
11/25/17 02:19 AM
Garage door guys. Help leveling door.
by MoparPosterChild
11/25/17 12:47 AM
Well, I did it. '17 Challenger.
by 68SportFury
11/24/17 10:23 PM
Similarity between new Durango taillights and 70 GTX grill
by Airgrabber
11/24/17 10:11 PM