Page 4 of 7 < 1 2 3 4 5 6 7 >
Topic Options
#2381936 - 10/04/17 04:25 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
A NEW PRODUCT!!




Right Or Left Hand Lower Dash Trim

Fits All E-bodies Except 70 Challenger)

This Commonly Missing Or Broken Part Mounts To The Dash Frame + Runs From The Center Of The Dash Pad Down Below The Radio + Over To The Steering Column

It Is Injection Molded, Has The Correct Grain + Fits Great

Available Through Tonys Part’s For $75 Per Side

In Stock + Ready To Ship

Tony’s Parts
302-398-0821

tonysparts.com
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381941 - 10/04/17 04:27 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
A NEW PRODUCT!!

72-74 Challenger Rally Plastic Fender Scoop Inserts.

This Commonly Broken Or Missing Part Mounts Behind The Fender Scoop Bezel Is Injection Molded And Correct In Appearance + Fit

$85 Pair,

302-398-0821

tonysparts.com

Tony’s Parts

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381942 - 10/04/17 04:28 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
A NEW PRODUCT!!

A New A/C Heater Control Panel And Switch Bezel Is Available For Your Rallydash Equipped Cuda Or Challenger.



These Are Specific To Rally Dash Equipped Cars.

They Look And Fit Just Like The Originals.

The Vent Register Functions As Original And The Detail All Of The Parts Is Accurate.

Just Install Your Buttons And Switches.

They Are Available As A Set For $220 ,
We Have A Small Quantity Of Extra Inner Switch Bezels Available For $95,

tonysparts.com

302-398-0821

Tonys Parts

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381946 - 10/04/17 04:30 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
A NEW PRODUCTS!!

1970 Challenger Right + Left Side Lower Dash Trims.

This Is Specific To 1970 Challenger Only.





These Are Now Available From Tony's Parts For $110 Per Side

tonysparts.com

302-398-0821

Tonys Parts

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381950 - 10/04/17 04:31 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
A NEW PRODUCT!!

The Rare And Hard To Find #2806070 Clutch Fan Drive Units Are Available As A New Reproduction.

These Were Used On All 67-71 426 Hemis, 67-71 Big Blocks And 1970 340s Without Air Conditioning.
These Were Used Into The 1971 Model Year

These Are Commonly Missing Or Worn Out, Loose And Wobbly.

These Appear Extremely Close To Original And Even Have The Correct Red Seal.

They Are Very Affordable At $200 And In Stock At Tony’s Parts



tonysparts.com
Please Email Through Website

302-398-0821

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381953 - 10/04/17 04:32 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
Concours correct 2806070 fan clutches.



We came out with a previous version and the face wasn't 100% correct, so we listened to your request and have redesigned the face to match the originals.

The Rare And Hard To Find #2806070 Clutch Fan Drive Units Are Available As A New Reproduction.

These Were Used On All 67-71 426 Hemis, 67-71 Big Blocks And 1970 340s Without Air Conditioning.
These Were Used Into The 1971 Model Year

These Are Commonly Missing Or Worn Out, Loose And Wobbly.

These are in stock and available for $300.

We also offer # and date code stamping for $10 additional.

Of course we still have our first version available for $200 for those who don't mind the bugs that are stuck in your radiator not having to look at a less then 100% correct face fan clutch.

They Are In Stock And Ready To Ship For $300
Part number and date code stamping available for $10 addtl

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381956 - 10/04/17 04:32 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
A NEW PRODUCT!!

#2863216 18-1/2” 1968-1973 7 Blade Fan For Use With Clutch
Licensed With Part Numbers And Pentastar
Was Used On All V8 B-Bodies, E-Bodies And C-Bodies With A Clutch Fan Drive Unit



These Fans Are Commonly Missing, Damaged Or Rusty And Have Become Very Difficult To Find In Serviceable Condition.
We Saw The Need To Make These Fans, So We Did. But We Didn’t Just Make A Fan, We Got It Licensed By Chrysler As A Correct Mopar Restoration Part. So These Fans Have All Of The Factory Original Part Numbers, Pentastars, Markings, Etc. They Even Have The White Ink Stamped “Engine Side” On The Rear Of The Fan Just Like The Originals

These Are Now In Stock And Available From Tony’s Parts For $140ea

302-398-0821

tonysparts.com
Please Email Through Website

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381964 - 10/04/17 04:34 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
! All New Part.

Lower Rod For Automatic Floor Shift Linkage For A,B,C and E-body Cars.
(Slight Modification Needed For Use On 1970 E-body With Column Lockout Linkage)

This Rod Is Almost Always Missing And Is Needed For Completing Your Automatic Floor Shift Linkage Set $45.

These Are In Stock And Ready To Ship

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381968 - 10/04/17 04:35 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
A NEW PRODUCT!!

66-70 Chrome Seat Adjuster Knobs,


There Were Used On Bucket And Bench Seat Applications For All Body Styles,
They Are Typically Worn Or Missing And Haven’t Been Available For A Very Long Time
These Are A High Visibilty Part That Is In Your Face, Nothing Worse Then Old Pitted Chrome Staring You Right In The Eye When You Open The Door

They Are In Stock And Ready To Ship

Price is $40pr

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381975 - 10/04/17 04:38 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
New Product
1970 And 1971-1976 Floorshift Steering Column Collar Sets

1970


1971 + newer


Whether It’s 4-Speed Or An Automatic Everyone Wants To Have A Car With A Floorshifter.

One Of The Items Needed For A Floorshift Conversion Is A Floorshift Steering Column, Those Are Getting Very Difficult And Expensive To Find. So We Have Just Released These 3-Piece Steering Column Collars For Converting A Column Shift Steering Column To A Floorshift Steering Column.

We Made The 1970 And The 1971-1979 Versions That Fit All A,B,C,E Body Columns Without Tilt/Telescopic

They Are In Stock And Ready To Ship For $160 Set

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381983 - 10/04/17 04:47 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
All New E-body Jack Hooks.

Mopar Licensed Correct With All Numbers and Pentastars as the Originals!

Finished In Their Correct Original Colors.


Available For:

70-71 Cuda #2931100 $100,
70-71 Cuda #2931101 $100,
70-71 Challenger #2931102 $100,

Tony’s Parts
302-398-0821
tonysparts.com

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381984 - 10/04/17 04:48 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
New Product From Tony’s Parts

Tony’s Parts Is Proud to Offer E-Body (70-74 Barracuda and Challenger) Correct Turn Signal Switch Levers/Stalks


These Have the Correct Bend and Are the Correct Length

Many cars out there don’t have the correct turn signal lever installed and the lever doesn’t come close enough to the steering wheel for ease of accessibility like the originals were

There Have Been Incorrect Ones Offered In the Past, Even the Last Versions Sold By Chrysler Didn’t Match the Assembly Line Levers, but These Are Just As the Originals And Less Expensive Too!

$40 Each

TONYSPARTS.COM
Please email through website

302-398-0821

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2381990 - 10/04/17 04:53 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE


Original Heavy Duty Leaf Springs With The Correct Numbers Are Hard To Find. Many Cars Have Had Their Leaf Springs Replaced Throughout The Years And Don’t Have The Correct Ones Installed. While New Leaf Springs Are Available Today They Don’t Have The Correct Factory Stamping Numbers On Them.

So that’s Where We Saw the Void That Needed to Be Filled.

We’ve Duplicated the Dimensions, Shape and Fonts Used on the Original Springs

We Have Made The Right And Left Lower Leaf Spring With The Correct Part Numbers For The Following Applications:
-70-71 E-Body 440 and 426 Hemi Cars #3400024-34
-1970-1/2 AAR Cudas + T/A Challengers #3400048

These Are Now In Stock And Available From Tony’s Parts For $175pr

TONYSPARTS.COM

Please email through website

302-398-0821

Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2382004 - 10/04/17 04:57 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
New Product

Radio Knobs Available For:

1970 B-Body
And
E-Body And
71-74 B-Body


These Are Commonly Missing From Cars And Or Radios.
Put These New Knobs On With New Chrome Ready To Install


Available For $35 For A Set Of 4 (2 Inner And 2 Outer)

They Are In Stock And Ready To Ship

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2382008 - 10/04/17 04:58 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
New Product
E-Body Ashtray Inserts with Rivets.


Replace That Old Rusty, Pitted And Faded Ashtray Insert With A New Correct Finished Insert.
Comes With Factory Style Rivets to Ease Installation

Available From Tony’s Parts For $75
They Are In Stock And Ready To Ship

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2382010 - 10/04/17 04:59 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
TONY_DAGOSTINO Offline
master

Registered: 01/19/03
Posts: 5069
Loc: DELAWARE
New Product!

E-Body Radio Surround Bezel.


These Are Commonly Broken Or Missing.
It Surrounds The Radio And Fills The Void To The Dash.
It Complements Our E-Body Heater Control Panels And Is Finished In The Correct Wrinkle Paint.

Fits All E-Bodies Except 70 Challengers With Standard Dash

Available From Tony’s Parts For $60
They Are In Stock And Ready To Ship

302-398-0821

TONYSPARTS.COM
Please call or email through our website

Tony’s Parts
Harrington Delaware 19952
_________________________
CLICK ON LOGO FOR WEBSITE

Top
#2382205 - 10/04/17 11:03 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparphilll]
moparphilll Offline
top fuel

Registered: 08/20/03
Posts: 2217
Loc: Fargo ND
OEM Center A/C dash vent for Barracuda or Cuda in BLUE Very nice FACE and Vents Functions correctly both ways, No broken vents. Back of housing has pieces cracked away but does not effect front.
Part # 2936846

$155 plus shipping
moparphilll@aol.com


Attachments
IMG_1629.JPG

IMG_1630.JPG



Top
#2382241 - 10/04/17 11:59 PM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
HemiBW Offline
member

Registered: 06/06/15
Posts: 11
Loc: U.S
70 Cuda fenders (L + R) - $650

One original and one reproduction. It will need a repaint for show quality but other than that they are in good shape. Located in MD. Local pick up only.






Edited by HemiBW (10/13/17 12:12 PM)

Top
#2382265 - 10/05/17 12:50 AM Re: E Body - Parts For Sale - 4th Quarter [Re: moparts]
dart440 Offline
enthusiast

Registered: 09/27/05
Posts: 341
Loc: California City, CA
Sold my 71 Barracuda, so I'm selling off my stash of 70-71 Cuda and Challenger Parts. Here are the first several boxes I've been through. Lots more to come. Many rare, NOS and excellent used items...as well as some reproduction. I'll be updating this list as stuff sells. Please read info at bottom of ad!!! More stuff coming...

BOX # 1
70-1 Cuda Driving Lights (YO Repro) $300
PENDING71 Cuda Fender/Body Bolt, Nut, Screw & Clip Set(Repro) $150
PENDING 71 Cuda Taillight Lenses & Gaskets(NOS)In Box 3514364-5 $325
PENDING70-71 E-Body Windshield Washer Bottle (NOS) 3431074 $80
71 Cuda Headlight Rings (Chrome) (6) - 2 Repro/4 Used $300
70-74 Cuda Outer Door Handles (Pair) (Repro) $150
70-74 Cuda Outer Door Handle (RH - Passenger) (Repro) $75
70-74 Cuda Exhaust Tips (Repro) $250
PENDING Road Wheel Centers (NOS) $105
- 3 Domes (NOS)
- 4 Retainers (NOS)
70 Cuda Redline 3-Piece Grille Molding w/Clips (Used) $80
70-71 E Body Conv. Well Molding Clips (Used) $50
70-74 E Body A/C Vacuum Switch (Used) $30
Trunk Seal (Repro) $20
70-74 Cuda Armrest Pad - Black (RH) (YO Repro) $40
70-74 E Body Rallye Gauge Voltage Limiter/Harness(Used) $20
70-74 E Body Rallye Gauge Voltage Limiter Harness(Used) $10
70-74 E Body Vinyl Top A-Pillar Molding(Pair-Used)3 Sets $20
2 Sets PENDING
PENDING70 Cuda Rear Valance Support Brackets (Used) $100
BOX # 2
MP Adjustable Pinion Snubber - Dana 60 (Used) $40
MP Adjustable Pinion Snubber - 8-3/4 (Used) $40
PENDING Pinion Snubber - Dana 60 (Used) $20
Cuda/Challenger Hood Latch Bracket (Used) $20
PENDING70-74 Cuda Front Licence Plate Bracket (Restored) $30
70-71 Cuda Grille Spacers (Black Discs)(Approx 10)(Used)$5
70 Challenger Grille Brackets (L & R)(Ex. Used) Pair $30
PENDINGTransmission Spacer/Washers(Pair)(Used) $5
E Body Std. Dash Voltage Limiter Wiring (Used) $2
K Member Bolts ($30/6, $20/4)(Used) $20
Steering Gearbox Bolts/Washers (3-Pc)(Used) 2 sets $10
Steering Gearbox Bolts/Washers (2-Pc)(Used) $5
Hurst Shifter T-Handle(Used) $10
Wheel Studs (5)(Used) $2
70-74 Cuda Rear Licence Plate Bracket (Used) $30
70-72 Plymouth Dog Dish Hub Cap (Aluminum)(Used) $20
71 B & E Body Remote Driver's Mirror (Chrome)(Used) $100
71 B & E Body Remote Driver's Mirror (Chrome)(Used) $80
BOX # 3
PENDING70-74 E Body A/C Vents (Green)(Used) Set of 2 $175
70-74 E Body A/C Vents (Black)(Used) Set of 2 $200
70-74 E Body A/C-Heater Controls & Bezel (Black)(Used) $250
70-74 E Body Heater Controls/Bezel w/Rallye(Black)(Used)$150
70 Cuda Headlight Bezel (RH - Passenger)(Used) Nice $120
Left Dash Bezel (Ex. 70 Challenger)(Black)(Ex Used) $75
Right Dash Bezel (Ex. 70 Challenger)(Black)(Ex Used) $75
70 Cuda 8-Track Radio Bezel (Black) (2984027)(Used) $200
Have non-working AM/8-track, just have not located yet.
BOX # 4
70 Cuda Taillight Assemblies (Pair)(Used) $200
BOX # 5
Heater Hoses - 70 E Body Big Block W-A/C(Pair)(YO Repro)$80
NOS SUN Tachometer and Tach Transmitter (Vintage) $200
Kendig Carburetor (Used) $100
PENDING70-71 Cuda Rear Bumper Guards (Rechromed)(Pair) $120
LH Thread Wheel Studs/Nuts (Used) $20
70 A & E Body Key-In Warning Buzzer(Used) $5
70-74 E Body Inside Door Lock Levers (Pair)(Used) $5
70 E Body 3-Speaker Dash Speakers (Need Recone) (Pair) Offer?
E Body Horn Relay (Used) $2
PENDINGE Body Inst. Panel Dimmer Switch (2947713)(Used) $20
PENDING E Body Trunk Light Assembly (Used) $20
70-74 Cuda Inside Door Handles(Nice Chrome)(Pair)(Used) $40
Spare Tire Wing Nut (Repro) $1
Spare Tire Wing Nut (Used) $1
71 B & E Body Fender/Hood Turn Signal Assy (Pair)(Used) $60
70-74 Cuda Door Panel Emblems(Pair)(Used) Nice $30
70-74 Cuda Door Panel Emblems(Pair)(Used) Fair $25
70-74 Cuda Door Panel Emblems(Pair)(Used)1 pin broken $20
PENDINGChallenger Hood Letters (Nice, No Pitting) (Set) (Used) $40
Challenger Hood Letters (Missing E) (Set) (Used) $10
Gas Tank Sending Unit Lock Ring (Original) $10
70-71 Cuda Side Marker Assembly Gaskets (Set/4) (Repro) $5
70-71 Barracuda Gran Coupe Fender Emblem (1) (Used) $20
70 Challenger "R/T" Grille Emblem (Used) (2998547) $30
70 Cuda Body Plug Kit (BPK1S - Year One) $100
70-74 E Body Window Cranks (3) (Used) $5
70-71 Cuda Side Marker Running Lights(2 Yel/1 Red)(Used)$30
70-71 Cuda Side Marker Housings/Backing Plates (Used)(3)$40
70-74 E Body Heater Control Cable (Used) $25
70 E Body Vent Cable (4)(Each)(Used) $20
E Body Throttle Cables(3)(Each)(Used) $5
PENDING70-74 E Body Pistol Grip Shifter Boot (NOS) $80
70 E Body Painted (RH - Passenger) Racing Mirror(Used) $100
Box #6
Alternator Stator Windings 3656453 60-amp (NOS) $50
PENDING70 Cuda/Challenger Turn Signal Switch(NOS)2947905$400
70 Challenger R/T Grille Emblem (NOS) 2998547 $120
Carburetor Choke Pulloff Diaphragm (2933190) (NOS) $15
Carburetor Choke Pulloff Diaphragm (2933190) (NOS) $15
Carburetor Choke Pulloff Diaphragm (Unknown P/N)(NOS) $15
70 Cuda Road Lamp Brackets (Year One Repro) (Pair) $50
70-71 Cuda Road Lamp Wiring (Year One Repro) (Pair) $30
70-74 E Body Fender-to-Cowl Bracket(Not Sure L or R)(Used)$5
PENDING70-74 Challenger Flip-Top Fuel Cap(NOS)(3466435) $250
PENDING71 Rect. "by Plymouth" Tailpanel Emblem (Used)(2963770) $100
70-74 Challenger Hood Emblem (Pair)(2988764)440 SixPack (NOS) Brushed Finish - Purchased from dealer in '81 $200
70-74 Challenger Hood Emblem (Pair) 426 Hemi(Repro) $150
R/T Emblem (New) (Stick-on) $10
70-74 E Body Battery Tray (NOS) (2925322) $100
Window Crank (Used) $3
70-74 E Body A/C-Heater Illumination Lamp (Used) $3
70-74 E Body A/C-Heater Temperature Lever (Used) $2
Heater Hose Bracket (Used) $5
70-74 E Body A/C Panel Bracket (Used) $2
BOX # 7
Rallye Wheel Centers 4.5"(Acorn w/Knockout)(Used)(Set/4)$25
904 Torque Converter Cover (Dust Shield/Insp. Cover)(Used)$5
70-71 E Body Manual Driver's Mirror (Used) Some pitting $10
70-74 E Body Vinyl Top A-Pillar Molding (1 Only)(Used) $5
70-74 E Body Standard Gauge Voltage Limiter Harness(Used)$2
71 Cuda Header Panel (Used) Excellent $300
70 Cuda Fenders (L and R) (pair) Goodmark Repro $920
71 Cuda Fenders (L and R) (pair) Goodmark Repro $920
Fenders + /set of reproduction louvers $1100
71 Barracuda Fenders (L and R) (pair) Goodmark Repro $920
72-4 Cuda Fenders (L and R) (pair) Goodmark Repro $920
70-71 Challenger Fenders (L and R)(pair) Goodmark Repro $920
70-74 Cuda Trunk lid (Repro) $400
70-74 E-Body Rear Shock Brace (Used) $100
70 Cuda Grille (New) Reproduction $500

1970-71 Plymouth Cuda 101 jack hook. This is for cars with rubber bumpers. This is an original jack hook in excellent shape. Part # 2931101. $90

1970-71 Plymouth Cuda 100 jack hook. This is for cars with steel bumpers. This is an original jack hook in excellent shape. Part # 2931100. $90

Why buy a reproduction jack hook when you can get the original part in excellent shape. The reproductions are close, but not perfect. Check the details.
1) When you look at the “0” in the part number, the originals are more oval on the top and bottom, not as pointy.
2) Check the rivet. Not all the reproductions are concave on the staked end of the rivets; some are flat, not like the originals.
3) On some reproductions, the stakes are too large and go into the concave area on the rivet.
4) Not all the reproductions have the correct size rivet head; some have a smaller/thicker rivet head.

Please email me chuck.vedra@yahoo.com with parts you want or if you want pics/additional details. Please include the box # so I can find the parts easily. Quantity is 1 ea. unless specified (i.e.; pair, set, etc.)

Please do not PM me here as I don't look at my PMs very often. If you don't see it here, send me an email with your wanted parts. I'll let you know if I have it...

**Cash or Postal Money Order only.**

Prices are plus shipping.

If you are looking to trade (willing to trade up/down), I'm looking for:
#102 Jack hook for a 71 Challenger
Front and Rear Challenger Rubber Bumpers
Challenger Rear Window Louvers
Other cool stuff for a 71 Challenger...what do you have???

****THANKS MOPARTS!!!****


Edited by dart440 (10/07/17 08:06 PM)
Edit Reason: Items sold
_________________________
When you work on Spaceships for a living, how bad can a workday be?

Top
#2382297 - 10/05/17 07:22 AM Re: E Body - Parts For Sale - 4th Quarter [Re: dart440]
Scotts72Rallye Offline
top fuel

Registered: 05/13/08
Posts: 2005
Loc: Third Stone from the Sun
Dodge, Plymouth A-727 318,340,360 transmission dust/gravel shield. Includes the always missing inspection hole cover.$90 shipped in the lower 48 states. PM here if interested. Thanks


Attachments
727 dust shield.jpg




Edited by Scotts72Rallye (10/05/17 08:17 AM)
_________________________
1972 Dodge Challenger Rallye
UNDER CONSTRUCTION

Top
Page 4 of 7 < 1 2 3 4 5 6 7 >

Advertisement
Sponsored Link
Forum Stats
24,897 Registered Members
32 Forums
184,180 Topics
2,133,554 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Carter TQ meetering rod diameter - where to measure?
by Diplomat360
10/18/17 08:34 AM
1970 dart
by DusterKid
10/18/17 07:39 AM
HemiHaines in Daytona Beach, Florida
by 62BT409
10/18/17 06:19 AM
Mega blocks, some different quality?
by gregsdart
10/18/17 05:35 AM