Page 3 of 11 < 1 2 3 4 5 10 11 >
Topic Options
#2382906 - 10/06/17 09:53 AM RHS MA-X Heads [Re: an8sec70cuda]
TheOtherDodge Offline
master

Registered: 02/08/03
Posts: 4812
Loc: Houston, Texas
These are used but have been cleaned and inspected.

Will need new guides/seals and a valve job (required when replacing guides). Other than that, they are ready.

2.02/1.625, springs are new set at 125 seat, 355 open.

Brand new these are $1,350 shipped. I am asking $650 shipped.

Please email me at jsintexas2@ yahoo. com


Attachments
1.jpg

Chambers.jpg

Valves.jpg

Springs.jpg


_________________________
- 94 Dakota, sb, 76mm turbo AC, PS, PB, full interior! 9.97 @ 133.33
- 00 Dakota QC, 5.9, stock, 6 lb Powerdyne, 13.9 @ 98.38
- 05 E55 AMG, 11.80 @ 117.9

Top
#2383008 - 10/06/17 01:47 PM Hurst Ramrod Shifter [Re: TheOtherDodge]
sixpacksteve Offline
super stock

Registered: 01/18/04
Posts: 1139
Loc: n.y.
Still works great!
Bracket and rods included!
came off an A-body!
SOLD! Thanks Moparts


Attachments
PA060537.JPG

PA060536.JPG




Edited by sixpacksteve (10/09/17 12:15 PM)

Top
#2383087 - 10/06/17 05:19 PM Re: Hurst Ramrod Shifter [Re: moparts]
EV2Bird Online   penguin-006
On Vacation

Registered: 06/23/14
Posts: 2942
Loc: Kansas Roads Between 0 and 140...
SOLD... THANKS MOPARTS!

NEW Mopar Performance .557 Solid Camshaft 273 318 340 360

CAM ONLY!

Still has there protective coating and yellow paper wrap.



PM me here. THANKS!

I purchased it approx 7 months ago, used a comp cam I had and needed the lifters from the .557 kit.


Attachments
DSC00120.JPG

DSC00121.JPG



Top
#2383122 - 10/06/17 06:48 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
@#$%&*! Offline
New user name, Same old jerk!

Registered: 05/03/08
Posts: 998
Loc: 1940 North Victory Boulevard ...
Holley Street Dominator Intake Manifold RB 440-413

Blasted clean and washed with soap and water. All threads good and chased, never ported, no signs it was ever milled. Someone did shorten the front coil mount pedestal for some reason but it still has enough threads to hold a coil. Perhaps will work with a small-block coil bracket, I should try that.
$200 plus shipping
not offended by offers
PM through board


Attachments
str dom 1.JPG

Street Dom 1.JPG

str dom 2.JPG



Top
#2383142 - 10/06/17 07:47 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
EV2Bird Online   penguin-006
On Vacation

Registered: 06/23/14
Posts: 2942
Loc: Kansas Roads Between 0 and 140...
Comp Cams 273 318 340 360

Comp Cams 305AH-8 Camshaft
Comp Cams 822-16 Lifters

$250 Shipped Lower 48 only

PM me here.

Thanks.


Attachments
DSC00119.JPG

DSC00118.JPG



Top
#2383144 - 10/06/17 07:48 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
EV2Bird Online   penguin-006
On Vacation

Registered: 06/23/14
Posts: 2942
Loc: Kansas Roads Between 0 and 140...
New Mopar Performance Cam Kit P4120231 284/284 lift 484/484 Dur 239@50 108 68 Overlap

Cam and Lifters $235 shipped usa lower 48 only

PM me here. Thanks.


Attachments
DSC00120.JPG

DSC00122.JPG

DSC00123.JPG



Top
#2383988 - 10/08/17 03:17 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
humpty Offline
enthusiast

Registered: 10/17/07
Posts: 294
Loc: Minnesota, USA
*** Sold***

BG400 fuel pump. Rebuilt by Barry Grant as a spare but never used since rebuild.

$175/B.O. PayPal preferred.

PM me here.

Thanks for the ad Moparts!


Attachments
IMG_0499.jpg




Edited by humpty (12/03/17 09:14 PM)
_________________________

72 Duster - 408ci W2, 10.18@131. Shooting for 10.0's in 2018!

Top
#2384284 - 10/09/17 04:03 AM New valve covers Direct Connection [Re: fbs63]
mosweethemi Offline
mopar

Registered: 12/31/07
Posts: 622
Loc: VA.
Hello I have three new sets of Direct Connection Tall chrome valve covers. 383-440- 318-360- 3.9 V6 $300.00 per set + shipping .I also have about 10 sets of big block and about 7 sets of small block .They sell from $275.00 down to $175.00 .All come with chrome bolts and caps and push in breathers . more infor call 540-337-4310 e-mail mosweethemi@yahoo.com

Top
#2384493 - 10/09/17 01:27 PM HURST B Body Ramrod and Super shifter 4 Speed Rods [Re: mosweethemi]
davesmopars Offline
master

Registered: 08/01/04
Posts: 2753
Loc: cheshire, ct
HURST B Body Ramrod and Super shifter 4 Speed Rods
In nice shape
100.00 plus shipping


Attachments
fullsizeoutput_1b68.jpeg



Top
#2384643 - 10/09/17 05:24 PM Re: For Sale - Race Parts - 4th Quarter [Re: moparts]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2684
Loc: Blue Ridge, VA
Koni 8212 1123 SPA1 double adjustable shocks
Stroke: 7.00" Max Length: 19.50" Min Length: 12.50" Ride Height: 16.00"
w/ Eibach 14" 130lb. springs, very good condition, $650 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Koni DA Shocks.JPG




Edited by Plumb Wired (10/11/17 08:33 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2384645 - 10/09/17 05:25 PM Re: For Sale - Race Parts - 4th Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2684
Loc: Blue Ridge, VA
Moroso #65000 4150-4500 2" carb adapter w/ Mr. Gasket #6004 Dominator safety plate and usable gaskets, used, very good condition, $50 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Moroso Carb Adapter.JPG




Edited by Plumb Wired (10/11/17 08:33 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2384646 - 10/09/17 05:25 PM Re: For Sale - Race Parts - 4th Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2684
Loc: Blue Ridge, VA
Aeromotive Fuel Filter #12612 -10AN bulkhead w/ 100 micron filter, brand new, only opened for pic, mounts inside your tank or cell, $70 shipped
PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Aeromotve 12612 Fuel Filter.JPG




Edited by Plumb Wired (10/11/17 08:35 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2384647 - 10/09/17 05:26 PM Re: For Sale - Race Parts - 4th Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2684
Loc: Blue Ridge, VA
9.00" - 9.56" Deck R3/Weber Belt Drive Motorplates, water jet cut from 1/4" T6061 aluminum. 36" wide centered for tube chassis application or marked for A-Body offset. Can be trimmed to fit any application. Use this plate along with Brian Smith (Smith Innovation) water pump spacers to complete the set up. Only 1 remaining in stock $175.00 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Plumb Wired Weber Belt Drive Motorplate.jpg




Edited by Plumb Wired (10/11/17 08:35 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2384649 - 10/09/17 05:27 PM Re: For Sale - Race Parts - 4th Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2684
Loc: Blue Ridge, VA
Autometer Super-Lite LED shift lite #5333, new, $60 shipped

Autometer Ultra Lite 2 5/8" Gauge Brake Pressure #4426, mechanical, used, $50 shipped

Autometer temp sender #2252, 1/8" npt for use w/ electric water temp gauge, new, $15 shipped

VDO MegaLite shift light w/ chromoly mount fits 1 1/4" steering shaft w/ t-bolt clamp, used, $80 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Autometer & VDO.JPG




Edited by Plumb Wired (10/11/17 08:37 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2384650 - 10/09/17 05:28 PM Re: For Sale - Race Parts - 4th Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2684
Loc: Blue Ridge, VA
Ritter fabricated aluminum W8 valve covers w/ fill bungs & vacuum pump fitting. The tops are slightly warped and I would recommend milling the flanges to assure a good gasket seal. I'll throw in a couple sets of used Fel-Pro gaskets, $200.00 shipped

Paypal (+3%) & US Postal Money Orders accepted

email: mgray0918@verizon.net or PM me thru Moparts

Thanks,
Mike Gray


Attachments
Ritter W8 Valve Covers.JPG




Edited by Plumb Wired (10/11/17 08:38 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2384652 - 10/09/17 05:29 PM Re: For Sale - Race Parts - 4th Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2684
Loc: Blue Ridge, VA
ARP #245-4307 12pt. Head Studs B1 Heads, NEW, $220 shipped

ARP #240-2501 12pt. Balancer Bolt, package has been opened, $28.00 shipped

ARP #200-2903 12pt. Flexplate Bolts, NEW, $14.00 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
ARP Mopar.JPG




Edited by Plumb Wired (10/11/17 08:39 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2384655 - 10/09/17 05:31 PM Re: For Sale - Race Parts - 4th Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2684
Loc: Blue Ridge, VA
Comp Cams BB Mopar Solid Roller, three bolt, older camshaft, used, very good condition, no cam card but here are the specs per Comp:
Intake: 288 @.050 / 4.83 lobe lift
Exhaust: 316@.050 / .480 lobe lift
114 lobe separation

Comp Cams Roller Lifters, .904 dia., centered, used, all rollers turn freely

Triple Springs, titanium retainers, locks (15), lash caps (8) (unknown brand, I assume comp)

All came from an engine I purchased and parting out. Package deal all for $500.00 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
BBM Comp Cams #1.JPG

BBM Comp Cams #2.JPG

BBM Comp Cams #3.JPG




Edited by Plumb Wired (10/11/17 08:39 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2384656 - 10/09/17 05:32 PM Re: For Sale - Race Parts - 4th Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2684
Loc: Blue Ridge, VA
B1/MC valves, 2.400" titanium intake (6) used, 1.780" stainless exhaust (6) used, $400 for all shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
B1-MC Valves.JPG




Edited by Plumb Wired (10/11/17 08:40 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2384658 - 10/09/17 05:33 PM Re: For Sale - Race Parts - 4th Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2684
Loc: Blue Ridge, VA
Misc. Nitrous:
Induction Solutions 1/4 Turn Valve #19705, w/ 6AN fittings, New, $55 shipped
Induction Solutions 1/4 Turn Valve Mount Tab #19809, New, $8 shipped
RJ Race Cars Aluminum Handle for 1/4 Turn Valve, New, $11 shipped
4" dia. Nitrous Pressure Gauge, used, $45 shipped
4ft. 6AN Line, NOS #15420, used, $35 shipped
1ft. 4AN Line, NOS #15210, used, $18 shipped
Edelbrock #72281 WOT Switch, 4500 carb, $30 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Nitrous Misc.JPG

IS N2O Misc..JPG




Edited by Plumb Wired (12/06/17 10:10 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2384662 - 10/09/17 05:38 PM Two Mopar R1 blocks [Re: moparts]
MGC340 Offline
member

Registered: 05/11/12
Posts: 111
Loc: Sioux Falls, SD
2 Mopar race R1 small blocks

R1 low deck small block
9.095 deck
4.085 bore
4-bolt mains
48' lifter
Bushed lifters
50 mm cam bearings
Has extra head bolts
$1700 with 2 new 50mm cam cores.

R1 tall deck block
Uncut tall deck
4.030 bore
4 bolt mains
48' lifter bore
Extra head bolts have been milled off.
Bushed lifters
New cam bearings in box
$2500

Please pm me for details, thanks Mark


Attachments
IMG_4474.JPG

IMG_4484.JPG

IMG_4472.JPG




Edited by MGC340 (10/13/17 09:43 AM)

Top
Page 3 of 11 < 1 2 3 4 5 10 11 >

Advertisement
Sponsored Link
Forum Stats
24,995 Registered Members
32 Forums
185,160 Topics
2,144,683 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Dodge 1500 heater box doors
by Bull1tt
12/10/17 09:00 PM
440 source balance job
by rbkt65
12/10/17 08:57 PM
benefits of 1/2 filling block
by rbkt65
12/10/17 08:52 PM
Pair of Ramchargers
by dfsmopars
12/10/17 08:22 PM