Page 1 of 4 1 2 3 4 >
Topic Options
#2379664 - 09/30/17 10:12 PM E Body - Parts Wanted - 4th Quarter
moparts Offline


Registered: 01/19/03
Posts: 13834
Loc: Norwich CT USA
up

Top
#2379853 - 10/01/17 09:50 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
FC7cuda Offline
super stock

Registered: 12/21/03
Posts: 834
Loc: Dallas, Texas
Trunk Spare RIM
Looking for an original rim that would have been in the trunk from a 1970 Cuda/Challenger. Full size 14 x 5.5" rim, not a collapsible. The wheel#2944242 on these were sometimes different than the wheel# of the 4 on the ground. PM here or pics to tomjeanine@hotmail.com


Attachments
2944242.JPG




Edited by FC7cuda (11/19/17 08:16 AM)
_________________________
70 Challenger RT/SE project - need NOS pillar emblems $$ LMK

Top
#2380382 - 10/01/17 11:26 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
440mopar Offline
mopar

Registered: 08/24/07
Posts: 538
Loc: USA
Wanted: 1971 style gull wing. I would like an original but will consider a reproduction.

fourfortymopar at yahoo.com

Top
#2380484 - 10/02/17 09:23 AM Re: E Body - Parts Wanted - 4th Quarter [Re: 440mopar]
Erik Offline


Registered: 01/20/03
Posts: 3230
Loc: Stroudsburg, PA
WANTED: 13/16" Lug wrench/tire iron for E-body Challenger.

What do you have?

PM me here.

Thanks!!!
_________________________
1970 Challenger R/T SE 383 Auto
1968 Barracuda Convertible - 416 4-spd

Contrary to the opinions of some, I am not dumber than I look.

Top
#2380701 - 10/02/17 03:15 PM Re: E Body - Parts Wanted - 4th Quarter [Re: Erik]
B5Cuda440-6 Offline
mopar

Registered: 08/30/15
Posts: 539
Loc: Indianapolis, IN
Looking for the following parts for my 1970 Cuda:

NOS Inner tie rod, PN: 3420155, with “5885” casting. Willing to pay up to $1000.00 for correct NOS part.

NOS Rear brake hose, PN: 3461727. Willing to pay up to $500.00 for the correct hose.

1970 440 6-Pack Carbs for a California car with ECS, Carb Numbers: 4175, 4144 & 4365 with a date code in the range of 250-300th of 1969. Looking for unmolested, rebuild-able cores for an OE car.

NOS Rear Valence with exhaust tip cut-outs, PN: 3444171 or later number.

NOS 383/440 Power Steering Belt, PN: 2951202.

I know all of these items are very rare, but I am willing to pay top dollar for the correct parts!

PM or e-mail at robert.traina01@gmail.com

Thanks everyone.


Edited by B5Cuda440-6 (10/03/17 08:15 AM)

Top
#2380990 - 10/02/17 10:05 PM 71-74 cuda rear valance [Re: B5Cuda440-6]
moparo Offline
super stock

Registered: 08/23/07
Posts: 1056
Loc: Ont, Canada
Looking for mint used or NOS 71-74 cuda rear valance with cut outs. US shipping address available.
_________________________
performancecarrestorations.com

Top
#2381108 - 10/03/17 05:24 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
kape1 Offline
member

Registered: 01/30/12
Posts: 51
Loc: Sweden
Looking for a nice original 1971 Cuda trunk lid with the cut outs in picture. straight and rust free.
Mopar# 3482802

US shipping address.

Thank you
Karl


Attachments
2017-10-03_11-17-33.jpg




Edited by kape1 (10/03/17 07:48 AM)
_________________________
http://www.garaget.org/?car=278641

Top
#2381154 - 10/03/17 09:05 AM WANTED: E body A/C Line clamp w/ screw [Re: moparts]
isettakurt Offline
member

Registered: 11/14/09
Posts: 25
Loc: Metro Detroit,Michigan
WANTED: '70-'71 E body A/C line ROUND CLAMP located by the fender tag with screw.
Thanks,Kurt
isettakurt@gmail.com

Top
#2382087 - 10/04/17 08:19 PM 383 Shaker Support Rod [Re: moparts]
Droop69 Offline
mopar

Registered: 02/19/11
Posts: 460
Loc: MN
Looking for the Shaker base support rod for a 383 Shaker E-body.

Original would be great, but I think someone was reproducing these in the 90's. Any information on these is appreciated.

PM here or call/text

Tom
(763) 229-8801


Attachments
5697184-383foot1.jpg

5697192-383foot2.jpg



Top
#2382318 - 10/05/17 08:21 AM Fuel Vent Lines Shield [Re: moparts]
Claudia Offline


Registered: 03/18/15
Posts: 225
Loc: Ohio
I am looking for the two piece set, new or used.
Any help / leads are appreciated.

Top
#2382823 - 10/06/17 12:21 AM Re: Fuel Vent Lines Shield [Re: Claudia]
MI Mopar Works Offline
mopar

Registered: 12/24/15
Posts: 449
Loc: MI
Looking for an excellent used or NOS antenna delete plug. Please PM me or call (734)624-2212.


Attachments
antennadelete.jpg


_________________________
MI Mopar Works
Parts Sales
Restoration and detailing of all kinds of mopar hardware
https://www.facebook.com/MIMoparWorks/


Top
#2382852 - 10/06/17 06:30 AM Re: Fuel Vent Lines Shield [Re: moparts]
Billy Offline
Newest Village Idiot

Registered: 07/27/15
Posts: 144
Loc: Chicago adjacent
Wanted**** several used hood pin plates

Top
#2383888 - 10/08/17 12:27 PM WANTED - Partial horn ring for a 1970 Challenger [Re: moparts]
Alaskan_TA Offline
Fluffy Balladeer

Registered: 01/20/03
Posts: 26134
Loc: Still moving in.
WANTED - Partial horn ring for a 1970 Challenger steering wheel.

Please email sixpak340(insert at symbol here)att.net with photo & price.

Top
#2384287 - 10/09/17 04:51 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
PasiR Offline
enthusiast

Registered: 11/23/04
Posts: 365
For 1971 Cuda wanted:

-Hood release lever


PM please.


Edited by PasiR (10/10/17 12:35 PM)

Top
#2384971 - 10/10/17 08:45 AM NOX solenoid bracket [Re: moparts]
71duster414 Offline


Registered: 08/18/14
Posts: 504
Loc: Wisconsin
I'm looking for this bracket that mounts to the back of passenger side head on 340's with the N95 emissions.

Only need the bracket

Thanks


Attachments
Screenshot_20170705-102552.png


_________________________
hoffmanhhr@gmail.com

Top
#2385252 - 10/10/17 06:10 PM Looking For: [Re: 71duster414]
convertcuda Offline
mopar

Registered: 10/02/07
Posts: 541
Loc: Wausau Wi
3461187 Master Cylinder - Has casting number below resvior Looking for NOS or used

71 date code. Not interested in junk but a nice piece.

Nice used 70 /71 Disk brake spindles

Nice used or NOS shaker original adaptor ring

Nice original shaker bubble

1 or 2 front lower control arm strut e- body rods - no pits or damage please

Have 70 / 71 Cuda NOS parts and thousands of mint used for trade or cash.

Ken 715-432-5080 text

Top
#2385656 - 10/11/17 01:14 PM Re: Looking For: [Re: moparts]
moparply Offline
master

Registered: 08/27/03
Posts: 5024
Loc: NJ
Original 1971 Cuda convertible drivers side stainless steel windshield trim. This is the piece of trim where the convertible top makes contact with. Looking for a nice original part. Let me know what you have and what the price would be including correct shipping.




Email Kenei@comcast.net

Thanks Moparts!

Top
#2387271 - 10/14/17 09:32 AM FRONT SUSPENSION PARTS FOR AAR CUDA NEEDED. [Re: moparts]
71redcuda Offline
pro stock

Registered: 09/16/10
Posts: 1278
Loc: Sweden

Looking for a NOS original idler arm.. or a repro that is as close to original as possible..

Also looking for a complete kit with strut rod hardware.. with correct brown zinc thick washers and rubber bushings.

Last a NOS fast ratio steering arm.

Pm here or email to: nicklas-780@hotmail.com

I live in Sweden so paypal payment only!

Thanks
Nicklas


Edited by 71redcuda (10/14/17 09:35 AM)

Top
#2389085 - 10/17/17 10:42 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
tobnHisglory Offline
member

Registered: 05/06/05
Posts: 191
Loc: Chester, VA
Found.

Thanks,

Reggie
804-677-8748


Edited by tobnHisglory (12/30/17 05:33 PM)
_________________________
-Reggie
tobnHisglory2000@aol.com
Former Mopars: 73 Charger - 440/727, 68 D200 Camper Special 383/727, 67 Satellite, 71 Superbee, 73 RoadRunner,2009 Ram Quad Cab Hemi 4x4
Current Mopars: 2005 Ram Quad Cab Hemi 4x4, 73 Cuda FE5 318 manual

Top
#2389422 - 10/18/17 03:49 PM NOS FAST RATIO PITMAN ARM [Re: moparts]
71redcuda Offline
pro stock

Registered: 09/16/10
Posts: 1278
Loc: Sweden
Im looking for a NOS fast ratio pitman arm.

Paypal payment only.

Email to: Nicklas-780@hotmail.com

Thanks
Nicklas

Top
#2390710 - 10/21/17 08:02 AM Re: E Body - 8 track player door [Re: moparts]
NortheastMopar Offline
pro stock

Registered: 01/26/03
Posts: 1536
Loc: Massachusetts
looking for an 8 track player door for a 70 thumbwheel radio with the 8 track player. Anybody out there got 8 track parts?
_________________________

Top
#2391494 - 10/22/17 08:34 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
NortheastMopar Offline
pro stock

Registered: 01/26/03
Posts: 1536
Loc: Massachusetts
looking for a 70 ebody 8 track eject button???
_________________________

Top
#2391747 - 10/23/17 10:50 AM Re: FRONT SUSPENSION PARTS FOR AAR CUDA NEEDED. [Re: 71redcuda]
mcat4321 Offline
master

Registered: 08/04/03
Posts: 2926
Loc: cincinnati ohio
I need a 1970 slapstick shifter and all the linkage to install, also the mounting brackets to in stalls console on the floor. A cut floor piece would be ideal..i need Everything to put a console in a 70 cuda. ALL brackets and linkage. I don't want to buy price by piece..thanks pm me here or
mcat4321@yahoo.com I'm in cincinnati or text 5133495556

Top
#2391926 - 10/23/17 03:16 PM Re: FRONT SUSPENSION PARTS FOR AAR CUDA NEEDED. [Re: moparts]
JH23 Offline


Registered: 12/23/13
Posts: 53
Loc: NJ
Looking for a Tuff Wheel adapter.

Top
#2393305 - 10/26/17 10:00 AM WANTED: E body A/C Line clamp w/ screw [Re: moparts]
isettakurt Offline
member

Registered: 11/14/09
Posts: 25
Loc: Metro Detroit,Michigan
WANTED: '70-'71 E body A/C line ROUND CLAMP located by the fender tag with screw.
Thanks,Kurt
isettakurt@gmail.com

Top
#2393499 - 10/26/17 05:55 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
Mastershake340 Offline


Registered: 01/10/05
Posts: 5366
Loc: Crook County, ILL
I'm looking for a AC firewall bracket part for E bodies, I believe the same part is used on '71 up B bodies also.
PM me here or email me brads147 at Comcast dot net
Thank you!
Got one lined up to buy, Thanks Moparts!


Attachments
AC bracket.PNG




Edited by Mastershake340 (10/27/17 11:01 AM)

Top
#2393527 - 10/26/17 07:05 PM Str Column Wire Cover-(Whole Column)-Drvr 3 Speker Cover [Re: 440mopar]
440PURSUIT Offline
pro stock

Registered: 12/17/04
Posts: 1363
Loc: DC, MD Suburbs
Missing Steering Column Wire Cover for a friends car.
Please advise.

I may buy a whole column to have on for myself.

Also missing his Driver Speaker Cover for 3 speaker dash

Thanks

Top
#2394481 - 10/28/17 10:09 PM wtb 1971 challenger [Re: 440PURSUIT]
Little Detroit Offline
enthusiast

Registered: 09/17/09
Posts: 269
Loc: WV
wtb 1971 challenger hood release lever pm me here

Top
#2394859 - 10/29/17 01:11 PM Looking for Mint 1970 E Body Door Latches [Re: moparts]
44D6PAKCUDA Offline
top fuel

Registered: 01/21/03
Posts: 1924
Loc: Land of 10,000 Lakes
I am looking for a set of 1970 only E Body door latches.The main thing I would like to find is a set that I can restore but the "C" shaped metal opening where the door striker meets needs to be straight and the thin metal lip untorn.Top dollar paid for the right set.Let me know what you have.PM me here or email jim@heartlandtire.net

Top
#2395273 - 10/30/17 09:42 AM Re: Looking for Mint 1970 E Body Door Latches [Re: moparts]
BB70DUSTER Offline


Registered: 02/03/03
Posts: 4395
Loc: SO CAL
Wanted... looking for the "E" emblem for the tail panel on a 72-74 Challenger, and a flip top gas cap, condition is not important... PM me with what you have. THANKS!
_________________________

Top
#2396063 - 10/31/17 12:44 PM 1971 Holley Six Pack 4672 Outboard Carburetor 4672 [Re: BB70DUSTER]
DPS_1 Offline
member

Registered: 11/05/05
Posts: 104
Loc: Arizona
I am looking for a 1971 Holley 4672 Outboard Six Pack Carburetor in very good condition. I need a date code of September to December of 1970. A carburetor that needs a rebuild is fine.
Please contact me at my email address dpsuozzi@gmail.com
I may have some items to trade as an option.
Thanks
Peter

Top
#2398201 - 11/03/17 10:10 PM Re: 1971 Holley Six Pack 4672 Outboard Carburetor 4672 [Re: moparts]
mcat4321 Offline
master

Registered: 08/04/03
Posts: 2926
Loc: cincinnati ohio
i need an EBODY hemi power brake booster
also a 70 heater box, complete
and a 70 3spd wiper motor
pm me here.. or e-mail
mcat4321@yahoo.com

Top
#2398285 - 11/04/17 05:55 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
JonC Offline
master

Registered: 01/21/03
Posts: 3517
Loc: Millinocket, Maine
Wanted: Black 72 Cuda drivers side upper seat cover. I have a tear in mine and prefer a used one in good condition to match my original.
_________________________
11B40

Top
#2399002 - 11/05/17 04:05 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
572_HEMI_Cuda Offline
enthusiast

Registered: 12/30/04
Posts: 297
Loc: Shelton, Ct.
looking for right rear 1/4 panel, top back corner

Also looking to 70-74 cuda inner roof support along the front windshield. [img]https://photos.app.goo.gl/50HZFq6M8bo92kLJ3[/img]


Edited by 572_HEMI_Cuda (11/05/17 04:07 PM)
_________________________
Our Projects www.seifertbros.com

Top
#2399353 - 11/06/17 11:09 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
biggE Offline
super stock

Registered: 12/08/04
Posts: 749
Loc: California
Wanted: If someone has a new Legendary back seat cover in black, hard top 1970-71 cuda to match front leather, I could use it. PM me here or eric0890@att.net. Thanks

Top
#2399991 - 11/07/17 12:55 PM 3 speaker dash outside speaker grilles [Re: moparts]
themopardude Offline
mopar

Registered: 10/31/03
Posts: 446
Loc: KS
Looking for a pair of E body front speaker grilles and retainers, for the small outer speakers. Contact me at 620-340-7890

Top
#2400498 - 11/08/17 11:28 AM 1973 Cuda Partial Firewall/Cowl [Re: moparts]
jim6346 Offline
enthusiast

Registered: 03/12/03
Posts: 379
Loc: Newark Valley, NY
Good Morning,

I am looking for a small section that goes just over the drivers side vent. It had a rats nest and rotted out the lip and part of the firewall. I think this is part of the firewall / lower cowl? I need approximately 14" in from the edge.

Below is a copy/paste link to what I am looking for..

https://1drv.ms/i/s!Apd0KxtKLRw_geUk2bJE0BhoKUD46A

Thanks!
Jim

Top
#2400660 - 11/08/17 05:03 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
GLR Offline
top fuel

Registered: 08/20/03
Posts: 2465
Loc: Northern Pa
WANTED; I have a friend who has a 1973 Dodge Challenger and all the A/C duct work is missing from his dash. Need it all.. let me know if you have some. Thank you!

Top
#2400690 - 11/08/17 06:05 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
Gar753 Offline


Registered: 01/26/15
Posts: 23
Loc: Kentucky
Wanted: "383 Magnum" emblems for Shaker bubble. Please PM me.

Top
#2400818 - 11/08/17 10:27 PM Need a hood release lever for 71 cuda [Re: moparts]
MoparMike1974 Offline
member

Registered: 01/07/13
Posts: 136
Loc: Maryland
Looking for a hood release lever for a 71 cuda. Let me know what you have and a price.

Thanks!

Top
#2400991 - 11/09/17 11:26 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
rtsinc Offline
mopar

Registered: 05/09/05
Posts: 655
Loc: apache junction, az
LOOKING FOR THE INTERIOR RT SIDE PAINTED ANGLE A PILLAR WINDSHIELD MOLDING FOR A 70-71 CHALLENGER OR CUDA. THEY HAVE A TEXTURE. 815 520 3227 RICH PLEASE NO PM,S CALL OR TEXT ME.

Top
#2401119 - 11/09/17 04:59 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
ah1s Offline
member

Registered: 01/22/04
Posts: 57
Looking for an original mint 71/74 ebody dash pad single speaker non ac.

Top
#2401816 - 11/11/17 08:43 AM Re: Fuel Vent Lines Shield [Re: moparts]
JH23 Offline


Registered: 12/23/13
Posts: 53
Loc: NJ
Looking for an original 70 E body driver side A pillar cover, black. No cracks or breaks. Thanks,


Edited by JH23 (11/11/17 08:47 AM)

Top
#2402928 - 11/13/17 08:08 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
moparply Offline
master

Registered: 08/27/03
Posts: 5024
Loc: NJ
NOS 1970 Hemi engine harness. Looking mostly just for the alternator section, possibly the complete harness.

Thanks!


Email Kenei@comcast.net

Top
#2403073 - 11/13/17 01:07 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparply]
JEJJ Offline
pro stock

Registered: 12/24/04
Posts: 1527
Loc: Western,NY
1970-1 Cuda/Barracuda NOS front driverside side marker bezel (housing) or complete side marker assembly. I have a nice Used one, would like NOS. I would consider the pair if you don't want to separate.

Send picture and price shipped to Buffalo NY 14225.

Thank you,
Jim

716-997-0070

Bakurruda@aol.com



Edited by JEJJ (11/13/17 01:07 PM)

Top
#2403674 - 11/14/17 05:36 PM Re: E Body - Parts Wanted - 4th Quarter [Re: JEJJ]
b5cuda69 Offline


Registered: 04/01/14
Posts: 10
Loc: KS
Looking for Cuda Gran Coupe woodgrain strips that go on doors and rear panels, either full or partial set is OK. Thanks!

Top
#2403717 - 11/14/17 06:55 PM WTB [Re: b5cuda69]
Little Detroit Offline
enthusiast

Registered: 09/17/09
Posts: 269
Loc: WV
wanted radiator 2998949 call 304 797 0607

Top
#2403855 - 11/15/17 01:19 AM E-BODY REAR DEFOGG & SPEAKER BOX [Re: moparts]
71redcuda Offline
pro stock

Registered: 09/16/10
Posts: 1278
Loc: Sweden
Looking for the "box" where the defogg & rear speakers mounts under the speaker tray..

Also looking for a set of standard black seat belts for rear seat.. its for a 1970 Challenger.

Thanks
Nicklas


Edited by 71redcuda (11/15/17 01:20 AM)

Top
#2405147 - 11/17/17 04:54 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
AzMoparMike Offline
member

Registered: 02/03/16
Posts: 36
Loc: Arizona
Im Looking for a set of 780 / 781 Torsion bars, if you have a set for sale then please let me know.

Thanks

Top
#2406135 - 11/19/17 08:30 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
70Challengerse Offline
master

Registered: 09/28/03
Posts: 7166
Loc: Lebanon ,PA in the Susquehanna...
Looking for a 727 case for a 71 cuda big block.... six pack car..thanks pm here @ moparts
got it.... thanks again


Edited by 70Challengerse (12/16/17 10:08 AM)
_________________________

70 Dodge Challenger se 440
71 Dodge Demon 416
71 V-Code Cuda
2016 Scatpak
Sometime words can serve me well,sometimes words can go to HELL... Harry Chapin

Top
#2406305 - 11/20/17 09:55 AM Re: Fuel Vent Lines Shield [Re: moparts]
fury4speed Offline
mopar

Registered: 03/30/05
Posts: 565
I am looking for a front sway bar for a 1970 challenger as rust and pit free as it can be , this is for a 440 challenger so if they make a HD version that is what I want , let me know how mush and what diameter it is , thanks

eanderson@hra.com

or message me here

Top
#2408173 - 11/24/17 08:08 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
AeroMonte Offline
master

Registered: 11/27/03
Posts: 5656
Loc: S.E. Missouri
Looking for 71 Barracuda door and quarter window parts. Will buy complete rusty doors as long as all the guts are intact. I bought a disassembled shell and only found the regulators and glass, everything else is missing. PM me or text 573-four two nine-4056 Thanks

Top
#2408713 - 11/25/17 01:23 PM 1970-74 Mopar E-Body Front Inner Fender Plates [Re: moparts]
scf100 Offline
enthusiast

Registered: 02/06/06
Posts: 244
Loc: Georgia
WTB original inspection plates for front inner fenders for a 1972 Barracuda

need the screws too if you have them

thanks!

Stuart

cofer1922@gmail.com
_________________________
1972 Barracuda 340

Top
#2411578 - 11/30/17 09:15 PM key in ignition switch, part no 2947488 [Re: jim6346]
318 Stroker Offline


Registered: 10/02/07
Posts: 3738
Loc: St. Louis, Mo
Looking for the key in ignition warning switch for my 73 Challenger. Goes inside the steering column. Part # is 2947488. Prefer a good used one.

Thanks, Allen


Edited by 318 Stroker (12/01/17 11:04 AM)

Top
#2412587 - 12/03/17 03:11 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
kdsmith07 Offline
pro stock

Registered: 04/15/07
Posts: 1237
Loc: Loganville GA.
looking for an e body column turn signal lever and a 4spd pedal assy.pm me here or call or text 678-542-9138.thanks,kent

Top
#2412607 - 12/03/17 07:52 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
tommie Offline
member

Registered: 01/18/13
Posts: 37
Loc: ny
looking for ebody shifter plate also fits 71 and up b bodys
part number 2996316

Top
#2412889 - 12/03/17 09:42 PM wanted 70 Challenger thumb wheel radio [Re: moparts]
69B71E10LC Offline
member

Registered: 01/05/13
Posts: 49
Loc: Motor City
Hi, I am looking for a 70 E-body am/fm thumb wheel radio, would prefer a working unit in decent shape. Please send a picture and price if you have a radio to sell. Thanks Andy

Thanks for the ad

Thank you found one


Edited by 69B71E10LC (12/09/17 11:05 PM)

Top
#2414323 - 12/06/17 03:22 PM Re: wanted 70 Challenger thumb wheel radio [Re: moparts]
71redcuda Offline
pro stock

Registered: 09/16/10
Posts: 1278
Loc: Sweden
Looking for mint NOS Cuda exhaust tips.

Send info and pics to:

Nicklas-780@hotmail.com


Thanks
Nicklas

Top
#2414767 - 12/07/17 01:31 PM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
moparmarks Online   content


Registered: 11/09/03
Posts: 10434
Loc: Western Colorado High Desert
Need a speedometer needle from a Rallye unit.
Thanks

Found one.


Edited by moparmarks (12/10/17 02:39 PM)
_________________________
71 RR A/G 4-sp Dana, 72 SSP 440, 72 Dart 5.9 4-spd, 97 DAKOTA, amoung others.
Moparmarks Parts & Restorations
Desert Mopar Metal
Grand Jct. CO
970-261-7039
http://moparmark.com/
moparmark@bresnan.net

Top
#2415799 - 12/09/17 02:36 PM NOx Parts Needed [Re: GLR]
VCODE Offline


Registered: 01/10/06
Posts: 1869
Loc: New York
Looking for a NOx control still needed for my 71 340 Cuda Auto Trans. Auto trans is different than a 4 speed.
See picture
Bob 914-843-9617


Attachments
noxIMG_0351.JPG




Edited by VCODE (12/17/17 09:00 PM)
_________________________
Mom & Dad let me buy a brand new 70 Challenger R/T 440 Six-Pack Super Trac Pack when I was 17 (Robert what is a 440 Six-Pack)

Top
#2415917 - 12/09/17 06:59 PM 22' radiator needed [Re: VCODE]
mopglen Offline
mopar

Registered: 05/26/06
Posts: 447
Loc: Pa
Looking for a 22' 71 radiator part number 3443962.

Top
#2416859 - 12/11/17 02:41 PM 71 Cuda door [Re: moparts]
mopglen Offline
mopar

Registered: 05/26/06
Posts: 447
Loc: Pa
Looking for a rust free passenger door for a 71 Cuda.

Top
#2417006 - 12/11/17 07:00 PM Heater Box [Re: moparts]
jim6346 Offline
enthusiast

Registered: 03/12/03
Posts: 379
Loc: Newark Valley, NY

Need a very nice heater box for a 70 Cuda Gran Coupe. Non-AC. Please send pics and price, including shipping to zip 13811.

Email to jim6346@yahoo.com or text to 607-761-2034.

Thanks!
Jim

Top
#2420453 - 12/18/17 02:47 PM Re: Heater Box [Re: jim6346]
70HemiShaker Offline
super stock

Registered: 09/26/06
Posts: 800
Loc: Home of the Bluegrass
WTB... 383 shaker emblems. TIA
_________________________
"It takes a Mopar to catch a Mopar"
70 Challenger: 472 Hemi, A-855,
& a 3.54 DANA 60
69 Bee..... we will see!


Top
#2424761 - 12/28/17 12:33 AM Re: E Body - Parts Wanted - 4th Quarter [Re: moparts]
Suregrip Offline
mopar

Registered: 01/29/03
Posts: 453
Loc: Fort Lauderdale, FL
Looking for a Cuda driveshaft P2883636 for 727 to Dana, should measure 43.6 inches from front to rear u-joint cups, with 7290 joints...
_________________________
Some people you just can't reach...

Top
#2425950 - 12/30/17 02:39 PM WTB original 1970 Barracuda tail light panel [Re: MoparMike1974]
scf100 Offline
enthusiast

Registered: 02/06/06
Posts: 244
Loc: Georgia
Want nice part

Thanks Moparts

cofer1922@gmail.com


Edited by scf100 (12/30/17 02:44 PM)
_________________________
1972 Barracuda 340

Top
Page 1 of 4 1 2 3 4 >

Advertisement
Sponsored Link
Forum Stats
25,078 Registered Members
32 Forums
185,689 Topics
2,158,775 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Hemi ARP bolts
by cudaman1969
01/21/18 10:57 AM
68 Coronet deck lid and body parts
by 65pacecar
01/21/18 10:51 AM
National Anthem
by 71birdJ68
01/21/18 10:23 AM
69 Daytona Restoration
by Mike Mancini
01/21/18 10:07 AM