Page 1 of 2 1 2 >
Topic Options
#2379648 - 09/30/17 10:06 PM Wanted - Truck / Van / Jeep Vehicles/Parts - 4th Quarter
moparts Offline


Registered: 01/19/03
Posts: 13773
Loc: Norwich CT USA
up

Top
#2379833 - 10/01/17 09:22 AM Re: Wanted - Truck / Van / Jeep Vehicles/Parts - 4th Quarter [Re: moparts]
plumcrazycuda Offline
top fuel

Registered: 12/14/03
Posts: 1699
Loc: PA
Looking for a A100 van or pickup project let me know what you have.
Thanks
Call
412 974 5813
_________________________


70 Cuda
73 barracuda
73 Barracuda
Looking for my build sheet or fender tag for my 70 Cuda Vin BS23H0B438517. Please look in your Blue on Blue Cuda or Challenger for the build sheet. My car was built in 7/70.

Top
#2383204 - 10/06/17 09:28 PM Re: Wanted - Truck / Van / Jeep Vehicles/Parts - 4th Quarter [Re: moparts]
sturmenater Offline
enthusiast

Registered: 11/06/09
Posts: 253
Loc: michigan
im looking for a good grill for my 84 w-250 i need the outer metal bezel and the light trims i have a good center section of the grill
im located in southwest michigan thanks

Top
#2386491 - 10/12/17 06:44 PM Re: Wanted - Truck / Van / Jeep Vehicles/Parts - 4th Quarter [Re: moparts]
weinerboy1 Offline
member

Registered: 02/13/11
Posts: 197
Loc: iowa
Wanted, nice or new '73 white truck arm rest pads. I would take the door panels also, mine is an adventurer. Thanks.

Top
#2390902 - 10/21/17 03:18 PM Re: Wanted - Truck / Van / Jeep Vehicles/Parts - 4th Quarter [Re: moparts]
T2R9 Offline
top fuel

Registered: 08/12/07
Posts: 2331
Loc: Conway, SC
I am in need of Sky-Lite parts, NOS or mint weather strip both inner and outer, and the pivot parts for the front. I also need nice red arm rest pads, and a right rear wheel opening molding with the wide lower Adventurer trim.
PM me here, Thanks!


Edited by T2R9 (10/29/17 03:31 PM)
_________________________
1973 Charger SE 400 HP
1978 Power Wagon 440 club cab, skylite
1995 Dakota Sport 5.2 5-speed
2016 Challenger R/T Shaker Plum Crazy

Top
#2391085 - 10/22/17 07:12 AM Outside mirrors for 65 d100 [Re: moparts]
Skid_Demon Offline
enthusiast

Registered: 10/06/03
Posts: 225
Loc: MN
I'm looking for right and left outside mirror brackets for a 1965 d100. They mount with a 3 hole triangle pattern. Thank you. skiddemon@gmail.com or 612 219 3333.


Edited by Skid_Demon (10/22/17 07:13 AM)

Top
#2391094 - 10/22/17 08:23 AM Re: Wanted - Truck / Van / Jeep Vehicles/Parts - 4th Quarter [Re: moparts]
NTOLERANCE Offline
master

Registered: 08/17/03
Posts: 4113
Loc: Madison Wi
Wanted -
pair of 15x10 steel wheels 5x5 1/2" bolt circle for late 80's early 90's Dodge Ram

Late 80's early 90's dodge half ton 9.25 rear axle with 5on5.5 lug pattern
Prefer 3.55 or 3.92 gear.

Needs to be within reasonable distance from central Wisconsin
_________________________
This post has been edited from its original form
Reason: Way too friggen drunk.

I was Mopar when Mopar wasnt cool and life was just a bet on a race between the lights.


Top
#2394386 - 10/28/17 07:28 PM Re: Wanted - Truck / Van / Jeep Vehicles/Parts - 4th Quarter [Re: NTOLERANCE]
hosehead Offline
top fuel

Registered: 09/09/03
Posts: 1730
Loc: Pasadena, california
Parts wanted for 73 d100
Blue arm rest pads
Rear view mirror
Chrome bumpers
Correct gas cap
Firewall clutch plug
Thanks moparts!


Edited by hosehead (11/26/17 10:57 PM)
_________________________
65 440/727 Belvedere
70 340/4-speed dart swinger
73 318/727 d100 shorty

Top
#2395336 - 10/30/17 11:30 AM Re: Wanted - Truck / Van / Jeep Vehicles/Parts - 4th Quarter [Re: moparts]
B1Frank Offline
mopar

Registered: 09/18/07
Posts: 646
Loc: West Virginia
****Looking for a 72-78 big block 4x4 4 speed clutch cover #11/12 inch,.. clean and no over priced part,..pm here thanks

Top
#2398022 - 11/03/17 03:04 PM Re: Wanted - Junkyard Spotters Tradesman Van 1971 1977 Parts [Re: B1Frank]
METZ Offline
member

Registered: 09/23/06
Posts: 17
Loc: Delaware
I'm looking for the clutch pedals and linkage to convert from auto to manual on a 1977 Dodge van. If you have it or know where a parts van is at a junk yard or wherever please pm me.

Top
#2398079 - 11/03/17 04:45 PM Re: Wanted - Junkyard Spotters Tradesman Van 1971 1977 Parts [Re: moparts]
johnnycuda Offline
mopar

Registered: 03/19/08
Posts: 674
Loc: lancaster,california
Anyone have a '87-'91 Dakota/Ram they are parting out with a A500 trans?, I need the 2-prong plug with a few inches of wire on it. The plug is oval, two wires coming from it, snaps into a sensor in the case by the shift linkage. If anyone has it, please PM me. Thanks in advance!
_________________________
1970 'Cuda,Lime Light,499 Indy S/R's 10.70's @125,street driven ALOT!
1966 Barracuda 360,now a 5spd,Hemi Orange,Hot Rod Air,
New daily driver-2003 Ram 2500 Cummins 5.9
2000 Dodge Ram,360 2wd.
New project-'69 Valiant 2-dr, budget sleeper!

Top
#2400571 - 11/08/17 01:29 PM Re: Wanted - 1975 W100 Power Wagon Grill [Re: moparts]
SomeCarGuy Offline
master

Registered: 02/02/03
Posts: 8174
Loc: Someplace you aren't
Wanted

91-96 Dakota 2wd regular cab

Looking for clean truck to build up. Would like to start with V8 truck, haven’t decided on doing small block or big block yet. Would like it to have the v8 to start with. I like the updated later style in the 1st gens.

If you have a truck already converted, that will be fine.

502-316-3269
_________________________
Forever in debt to your priceless advice...

Top
#2402436 - 11/12/17 09:25 AM Rear seat anchors [Re: moparts]
70FJ5383 Offline
enthusiast

Registered: 03/22/04
Posts: 322
Loc: Toledo, Ohio
I am putting a 79 back seat in my 77 RC because I can’t find a nice 77 seat to match the fronts.
The 79 seat needs two anchors that bolt through the floor allowing it to latch down. The 79 seat lifts up to allow access behind it, the 77 doesn’t.

I think the anchors are U shaped pieces, similar to u bolts, that bolt upside down through the floor to a backing plate.

tonguue So basically I need two 79 anchors and backing plates they bolt to.
I’m sure Some other years are similar.

Top
#2404823 - 11/17/17 12:04 AM Jeep Liberty Renegade wanted. [Re: moparts]
OhioMopar Offline
master

Registered: 08/17/03
Posts: 7446
Loc: Mt.Gilead, Ohio
I'm looking for an '03-'05 Liberty Renegade.
I don't have many requests. Black or silver. 4x4. Manual transmission. As many options as possible.
Blown engine, bad clutch are fine, I'll fix it.
Pm me here.
I don't need a show piece. Just a winter driver so I can park my Challenger.


Attachments
download.jpeg


_________________________
ISO '69 GTS 340 or '71 Demon 340 project.

Top
#2407277 - 11/22/17 08:36 AM Re: Jeep Liberty Renegade wanted. [Re: moparts]
scratchnfotraction Offline
I Live Here

Registered: 05/29/03
Posts: 14994
Loc: Florida
anyone have a OEM egr block off plate?

Top
#2407436 - 11/22/17 01:38 PM Re: Jeep Liberty Renegade wanted. [Re: scratchnfotraction]
Azzkikrcuda Offline
pro stock

Registered: 01/20/03
Posts: 1596
Loc: North Dakota
Need an engine harness for a 79 Dodge pickup with a big block. Not sure if other years fit ok. Would be interested in a small block harness also.
_________________________
The only Carbs I care about are under the hood!

Top
#2408465 - 11/24/17 08:53 PM Re: Jeep Liberty Renegade wanted. [Re: Azzkikrcuda]
birdtracker Offline
mopar

Registered: 06/20/04
Posts: 429
interested in a rust free cab 85 thru 93. pm here or acdlship@hotmail.com. thanks Birdtracker

Top
#2410133 - 11/28/17 11:33 AM Re: Jeep Liberty Renegade wanted. [Re: moparts]
Blucuda413 Offline
top fuel

Registered: 01/24/03
Posts: 2383
Loc: Alexandria, LA
Anyone know of a good Ram SRT-10 engine for sale??
_________________________
Best 1.40 60ft, 6.32 @ 109.5 in the 1/8th. Still working on it!!

Top
#2411254 - 11/30/17 10:28 AM Re: Jeep Liberty Renegade wanted. [Re: moparts]
70HemiShaker Online   content
super stock

Registered: 09/26/06
Posts: 795
Loc: Home of the Bluegrass
WTB....
load sensing proportioning valve for a '93 ram 250 4wd.
TIA
_________________________
"It takes a Mopar to catch a Mopar"
70 Challenger: 472 Hemi, A-855,
& a 3.54 DANA 60
69 Bee..... we will see!


Top
#2412040 - 12/01/17 09:26 PM Re: Wanted - 1975 Dodge pickup original antenna complete [Re: moparts]
MuscleMopars Offline
master

Registered: 08/17/03
Posts: 4286
Loc: North Central USA (MN-WI area)
Wanted - 1975 Dodge pickup original antenna complete

THANKS!
_________________________
Thanks,
Eric
email eric@musclemopars.com
715-426-HEMI
612-669-CARS

Go to my Moparts "Profile" to see my web site

Top
Page 1 of 2 1 2 >

Advertisement
Sponsored Link
Forum Stats
25,002 Registered Members
32 Forums
185,255 Topics
2,146,226 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
New Sun Super Tach?
by Silverbullet2
12/13/17 04:58 PM
torque converter issue
by tex013
12/13/17 03:49 PM
Canon digital camera comparison
by StrokerPost
12/13/17 02:44 PM
Where can I find these rivets?
by chrisf
12/13/17 02:31 PM