Page 2 of 5 < 1 2 3 4 5 >
Topic Options
#2384202 - 10/08/17 10:05 PM For Sale RB Wedge Stock Appearing, FAST, NSS, [Re: moparts]
RalphsRapidTrnst Offline
top fuel

Registered: 09/19/04
Posts: 2012
Loc: Bristol, CT
For Sale is your chance to buy the best Stock Appearing Drive Train for your 1967 to 1972 Mopar.

I am offering a just freshened one season 496CI RB-Wedge Motor. The Block is a late casting 440 sonic checked, magnaflux, line honed and decked. Bored and Stroked to 496CI. with 12 to 1 Compresion. The heads are Dwayne Porter Racing Open Chamber Cast Iron heads legal for any build from 1967 to 1974. Internals include Ferrero valves and the best valvle springs available. Ported to full capacity for maximum performance. The Cam is a full rollor spec'd out by Dwayne Porter Racing with nothing but the best Harlen Sharp Rockers and Smith Brothers Components. This is a complete Motor that can be heard running in my 1971 GTX. Also Available if interested is the 6BBL induction System intake and carbs that are tuned and ready to go. It doesnt stop there! Available is a complete full Rollor 727 Transmission with a manual forward valve body (that works great with a slap stick) built by the Best Randy Juliani Just freshened up as well. A one year old Lenny Stock Appearing Ultimate Convertor Concepts convertor built for this combinations.

[b]Here are the performance numbers.
In a 1971 Plymouth GTX this combo with exhaust manifolds and a full 2.5 inch exhaust in a 4300Lb. GTX runs 11.3's at 123MPH.

The price!
$7500.00 for the 496CI Oil Pan to Valley Pan
$10,500.00 496 with Tuned Six Pack
$12,500.00 496, Complete Six Pack and Complete Trans and converter
Also Looking to Trade for Hemi Parts of Interest.

This combo is 100% Stock appearing legal and FAST Legal. Can also be used in any NSS class racing or bracket classes. A great combo for any Mopar MuscleCar.

Call or Email me 860 416-one228 RalphsRapidTransit @

71-9 (1).jpg




A Collection Of All Things Chrysler

Stock Appearing MuscleCar Racing

#2384286 - 10/09/17 04:31 AM Re: For Sale New pcv valves with caps and pcv valves only [Re: RalphsRapidTrnst]
mosweethemi Offline

Registered: 12/31/07
Posts: 622
Loc: VA.
Hello I have a lot of PCV Valves new with caps and with out. Some caps has been painted engine paint .I have about 80 new in the pack they can in .Also one 273 ,426 Wedge or 426 Hemi Chrome cap,$35.00 ea plus shipping .Some caps was powder coated $45,00 ea . Single PCV Valves in the pack $25.99 ea plus shipping . Chrome cap $75.00 plus shipping . zip code 24477 e-mail me at ( ) also on here and call me at 540-337-4310

#2384398 - 10/09/17 10:49 AM Holley Six Pack Carburetors Carbs [Re: moparts]
rocket34 Offline

Registered: 05/29/05
Posts: 115
Loc: Virginia, USA
Holley Six Pack Carbs

Promax rebuilt these a couple years ago, tested them on a mule engine, I took them off the car a few months ago. I replaced them with new carbs and it runs exactly the same.

LIST - 4392 1209 (April 30 1969) -69 1/2 440 AUTOMATIC CENTER CARBURETOR - $550

LIST 4790 2247 ( show contact info Repro 1970 340 OUTBOARD $250

LIST - 4365 - 1 0595 (1975?) 1970 440 REAR OUTBOARD - $250

$850 for all three

Trades/plus or minus cash: for 69 Road Runner six pack hood, B Body Dana 60 , Hemi Transmission, FASS for 06 Dodge Ram Cummins, HD Rear bumper for 2006 Dodge Ram , 45 or 100 lb olympic plates etc. A lot of these would depend on locality.





69 Road Runner work in progress

#2384410 - 10/09/17 11:02 AM 383 Magnum Intake [Re: rocket34]
mopars4life Offline
super stock

Registered: 08/08/04
Posts: 727
Loc: Virginia
383 Magnum Intake

Removed from a 1970 Dodge Super Bee. $70 takes it.




#2384411 - 10/09/17 11:03 AM 1969 383 Shortblock [Re: mopars4life]
mopars4life Offline
super stock

Registered: 08/08/04
Posts: 727
Loc: Virginia
1969 383 Shortblock
I have a 1969 383 engine out of a coronet. It should be stock bore and untouched. The cylinder walls were lubricated to prevent rust and it spins nicely. It has the balancer, oil pan and I also have a water pump housing for it. $350 takes it – must pick up!





#2385068 - 10/10/17 11:16 AM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 23239
Loc: Oregon
4 bbl intake manifold with 6/30/66 casting date. Correct for '67 440 HP but will fit any RB engine. Asking $60 plus shipping. Paypal, money order or check. PM me on the board. SALE PENDING

DSC_9021 (Large).JPG

DSC_9022 (Large).JPG

Edited by AndyF (10/13/17 08:20 PM)

#2385150 - 10/10/17 02:37 PM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
++MAX WEDGE++ Offline

Registered: 04/21/08
Posts: 80
Loc: Near Columbus, Ohio

1967 383 engine. Pressured checked and magged 300.00 obo






Edited by ++MAX WEDGE++ (10/14/17 07:15 AM)

#2386175 - 10/12/17 08:47 AM Re: For Sale - Big Block Engine - 4th Quarter [Re: KOS]
jonesboys Offline

Registered: 03/24/07
Posts: 121
Loc: waynesboro va
1971 440 engine complete 500.00 contact billy dickerson 540-470-4398 im listing for a friend and can answer most ? non hp looks original still has factory valley gasket in place also lots of cyl head cores 906-452-346 casting numbers

#2387134 - 10/13/17 09:35 PM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
moparply Offline

Registered: 08/27/03
Posts: 5017
Loc: NJ
NOS Max Wedge swinging oil pickup base, mint condition, $400

Very rare. Always cracked, bent or damaged.


#2387363 - 10/14/17 12:58 PM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
old_racer Offline
pro stock

Registered: 12/30/03
Posts: 1241
Loc: Wi.
almost new crane solid roller cam ir-280/4778-8 a few dyno runs can hardly see witness marks from lifters, 717 lift, 280@.050dur. .012 lash. have cam card. an original box. $125.00
email for pic's

#2387410 - 10/14/17 02:54 PM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
DusterW2 Offline
top fuel

Registered: 01/21/03
Posts: 1636
Loc: Portsmouth, VA
MP main bearing set for B engine, P/N P4286971, 010 undersize, NEW $75 + shipping from 23703.

Clevite 77 main bearing set for RB engine, P/N MS-877P, (P series), STD, NEW $75 + shipping from 23703.

Fel-Pro Head Gasket, P/N 1009 (Only One), NEW, $35 + shipping 23703

Fel-Pro Head Gasket Set, P/N 8519PT (Two), NEW, $30 + shipping 23703 or PM DusterW2 (Prefer US Postal Money Order)
1972 Duster 340 W2, 904; 11.21/118.7, 60' 1.55 1971 Duster 340, 727; 13.04/105, 60' 1.88

#2387629 - 10/15/17 08:22 AM 68 383, needs assembly [Re: moparts]
cbusters Online   content

Registered: 05/08/05
Posts: 596
Loc: Florida
1968 383 Dodge, Plymouth, Complete Engine apart, +.030 Bore, 10/10 Crank
All Parts Date Coded with Correct Production Line Castings for a 68 Car unless noted:

New Included:
Pistons (pressed on rods) & Rings
Comp Cam W/Lifters(Purple Cam Specs)
Cam Bearings installed
Timing Chain and gears
Water Pump
Oil Pump
Valley Tray
Exhaust Manifold studs & nuts
Freeze Plugs
Gaskets, seals

Used Included:
Block +.030
Heads & bolts
Crankshaft 10/10 with Pilot Bushing
Intake & bolts
Exhaust Manifolds w/good valve, studs, nuts for 69 B-Body (w/baked-on Eastwood cast finish)
Water Pump Housing & bolts
Timing Cover, oil deflector & bolts
Balancer w/bolt & washer
Valve Covers & bolts
Rear seal retainer & bolts
Valley Tray end bars & bolts
402 Oil Pan & bolts
Windage Tray
Oil Pump pickup
Stock Rockers, Shafts and Pushrods
Crane Adjustable Ductile Rockers
Distributor (incorrect) w/Pertronics Conversion and Pertronics Coil
Like new Edelbrock AVS
Motor Mounts & bolts
Brackets, Pulleys (detailed) for Alternator, Water Pump and Power Steering
Coil Bracket & bolts
Throttle and Return Spring Brackets
Cooler Lines
4 Blade Fan w/Spacer & Bolts
No need to chase down missing parts

Included: Later Model 727 & Converter w/Old Unrun Rebuild


#2388342 - 10/16/17 06:00 PM Re: 68 383, needs assembly [Re: cbusters]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10703
V8 Big block single point tune up kit for aluminum distributors
mallory brass insert black hd cap
mallory tan super duty riveted rotor
mallory super duty contact points
std strap type condenser

mallory 001.JPG

mallory 002.JPG

mallory 003.JPG

#2388683 - 10/17/17 10:20 AM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
KOS Offline
pro stock

Registered: 08/17/03
Posts: 1359
6pak air cleaner lid.....$80.paypal ok PM me

6p lid.jpg

#2388971 - 10/17/17 07:09 PM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
mopars4ever Offline
I Live Here

Registered: 01/20/03
Posts: 10338
Loc: md
A pair of mopar exhaust flange gaskets part number 3818115 $12.00 Shipped US PM me.


#2389741 - 10/19/17 09:16 AM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
crabman173 Offline

Registered: 01/01/06
Posts: 3550
Loc: Big Lick , North Carolina
Jan 1968 D 440 engine fresh built
Started with perfect core-factory steel crank, LY, Wiseco forged flat tops , balanced, new Hemi pan, double roller, big summit cam 224/234 at 050, Fel Pros, 346 heads all new guides, new valves, springs, Cm retainers, factory rockers, perf RPM intake new, new Rick Ehrenburg Mopar electronic distributor
NICE 440 should make 410 HP easy as pie Tire melter that will still operate vacuum assec's with ease and just be a good fun 440 --located in NC can ship cheap as dirt--$4999 firm or 704 244 6649 Thanks

440JULY$$$$ 009.JPG

Description: 6

I have always had a fascination with fast cars at the expense of more normal character development

#2390017 - 10/19/17 06:59 PM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
E-Ticket Offline
top fuel

Registered: 03/18/07
Posts: 2413
Loc: Louisville, KY
Holley Street Dominator Intake For RB Motor.

$195.00 insured UPS shipping included in the lower 48!

Interested parties please PM me.

Thanks for the ad space Moparts!!!



"Fat drunk and stupid is no way to go through life son......"

#2391288 - 10/22/17 01:38 PM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
tntauto Offline

Registered: 02/10/17
Posts: 8
Loc: MI
I have 2 1970 440 HP Motors with 6 pack internals.

Complete from Intake to Oil Pan..

Both are Standard bore.

1 is Cast August of 1969 0G119566


the other is cast December of 1970 0G192825

$2,500 each..

I do not know how to load pictures on this site..

Text or Call 586 484 4o39 for more info and pictures.

Edited by tntauto (10/25/17 06:28 PM)

#2391578 - 10/22/17 11:18 PM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
Frank Losurdo Offline

Registered: 05/08/16
Posts: 4
Loc: Illinois
I have a 1972 440HP six pack motor, 1971 casting year, Forged crank, flat top pistons, VIRGIN BORE, it is original, I have multiple pairs of heads so you can choose what heads. $1000
Elburn, Il

Email: or call/text (630)816-7164

Edited by Frank Losurdo (10/22/17 11:19 PM)

#2391844 - 10/23/17 01:15 PM Re: For Sale - Big Block Engine - 4th Quarter [Re: moparts]
torredcuda Offline
super stock

Registered: 01/20/03
Posts: 1018
Loc: NH
2 440 engines complete, "running when pulled" , one `74 and one `75, $700 ea or B.O. , pick up only in Epping NH

`72 Barracuda 340/4spd
`70 road runner 383/auto
`70 Duster 360/auto drag car
`71 Duster project
`76 W100 clubcab project
`83 W350 plow truck

Page 2 of 5 < 1 2 3 4 5 >

Sponsored Link
Forum Stats
24,969 Registered Members
32 Forums
185,452 Topics
2,149,418 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
70 Cuda Grille and Grille Molding Options
by rss
11/25/17 02:19 AM
Garage door guys. Help leveling door.
by MoparPosterChild
11/25/17 12:47 AM
Well, I did it. '17 Challenger.
by 68SportFury
11/24/17 10:23 PM
Similarity between new Durango taillights and 70 GTX grill
by Airgrabber
11/24/17 10:11 PM