Page 3 of 3 < 1 2 3
Topic Options
#2352444 - 08/11/17 01:52 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
jcc Offline
I Live Here

Registered: 12/21/03
Posts: 16795
Loc: Trumussia
Your 17" choice vs say 18" surprises me. I have nothing against 17's and they IMO work well/good with our age of cars, but, my thinking is, 17's will eventually become the new 15's , limited tire selection. I am not sure how long that trend will/could continue, but I have been wrong before. Just making a substantial investment in maybe non resell-able rims in a size that may become scarce, makes me pause. Thoughts?

Top
#2352675 - 08/11/17 10:34 PM Re: 315 Square setup E-body `Cuda [Re: jcc]
RylisPro Online   laugh2


Registered: 06/18/07
Posts: 2160
Loc: NorCal
You are correct jcc,
Most performance sizes are in 18 inch. I will be running a 255/40-17 which is still a very popular extreme performance tire size for many imports.

The 17 inch wheel size I'm getting for my S2K will still be able to sell if I ever decide to with this set of Forgelines. Supply and demand, the market will always dictate what sells.
_________________________

/Drive
Instagram: @rylispro
YouTube:RylisPro
www.rylispro.com
925-214-9192

Top
#2352701 - 08/11/17 11:53 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
MuuMuu101 Offline
I got lucky at Woodward!

Registered: 12/12/10
Posts: 12162
Loc: Covina, Ca
I just realized it was $4k for wheels after the discount. frown


Edited by MuuMuu101 (08/15/17 12:41 AM)
_________________________

68 Dart GT Project Thread: Linky!

Top
#2352705 - 08/12/17 12:21 AM Re: 315 Square setup E-body `Cuda [Re: MuuMuu101]
RylisPro Online   laugh2


Registered: 06/18/07
Posts: 2160
Loc: NorCal
Hey Samy,
It's more like $5k for the monoblock wheels, very expensive.
It is one of the reasons why I am trying to work with Forgeline to setup a group buy.

I can go on & on about how awesome the wheels are, how the customer service is great, blah blah blah, but at the end of the day the high price will always deter most people.
_________________________

/Drive
Instagram: @rylispro
YouTube:RylisPro
www.rylispro.com
925-214-9192

Top
#2361365 - 08/28/17 07:21 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
RylisPro Online   laugh2


Registered: 06/18/07
Posts: 2160
Loc: NorCal
I went out to test the 315's





They work great!
_________________________

/Drive
Instagram: @rylispro
YouTube:RylisPro
www.rylispro.com
925-214-9192

Top
#2361374 - 08/28/17 07:32 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
Frankenduster Offline
Moparts proctologist

Registered: 02/15/10
Posts: 14883
Loc: Granite Bay CA
Damn, that looks beefy.
Cool!

Top
#2361784 - 08/29/17 02:10 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
Mopar Mitch Offline
super stock

Registered: 01/17/10
Posts: 988
Loc: NW Chicago suburban area
RylisPro -- Your car looks awesome! Let us know if they rub under racing conditions.
_________________________
Mopar Mitch "Road racers and autocrossers go in deeper and come out harder!"... and rain never stops us from having fun with our cars... in fact, it makes us better drivers! Check out MOPAR ACTION MAGAZINE, August 2006 issue for feature article and specs on my autocross T/A!

Top
#2362097 - 08/29/17 10:37 PM Re: 315 Square setup E-body `Cuda [Re: Mopar Mitch]
RylisPro Online   laugh2


Registered: 06/18/07
Posts: 2160
Loc: NorCal
Thanks guys!
There seems to be no rubbing yet Mitch. From preliminary testing around my local mountain roads there is no rubbing on the tires anywhere as evidenced by the tire injection "hairs" still being intact.

You can see them in the pic and all four tires are still like that. I haven't pushed the tires at all maybe about 45-50 mph in a turn? I'll definitely post pics when I'm at the track again!
_________________________

/Drive
Instagram: @rylispro
YouTube:RylisPro
www.rylispro.com
925-214-9192

Top
#2377058 - 09/26/17 10:02 AM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
NV69B7RR Offline
master

Registered: 11/08/06
Posts: 5674
Loc: Reno, Nevada
Damn that thing looks mean!
_________________________
68 AMX track car
72 Demon 340
71 Duster 340 Resto http://board.moparts.org/ubbthreads/show...part=1&vc=1

Top
#2405717 - 11/18/17 08:58 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
RylisPro Online   laugh2


Registered: 06/18/07
Posts: 2160
Loc: NorCal
315's work! Confirmed at the Carousel in Sonoma Raceway and the Corkscrew at Laguna Seca

No damage to my fenders, no rubbing or hitting, not even close!

_________________________

/Drive
Instagram: @rylispro
YouTube:RylisPro
www.rylispro.com
925-214-9192

Top
#2405735 - 11/18/17 09:27 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
MuuMuu101 Offline
I got lucky at Woodward!

Registered: 12/12/10
Posts: 12162
Loc: Covina, Ca
335's now? grin
_________________________

68 Dart GT Project Thread: Linky!

Top
#2405778 - 11/18/17 11:18 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
RylisPro Online   laugh2


Registered: 06/18/07
Posts: 2160
Loc: NorCal
It's funny you say that Samy!
I think that 335's would definitely fit in the rear. There is tons of clearance out back once one folds the fender lip up. Having 335's might actually cure my slight oversteer issue. Loose is fast though as they say.

335's in the front is another matter though as one would need a 12" wheel up front and that would be a really expensive experiment, if it fits...

I'm very happy with a 315 square setup though!
_________________________

/Drive
Instagram: @rylispro
YouTube:RylisPro
www.rylispro.com
925-214-9192

Top
#2405803 - 11/19/17 12:47 AM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
Frankenduster Offline
Moparts proctologist

Registered: 02/15/10
Posts: 14883
Loc: Granite Bay CA
Loose is fast and on the edge of "Out of control"
Harry Hogg, Days of THunder.

Loose is also unpredictable. I'd prefer LOOSE in a drift car and a little tight in a track car.

Top
#2405888 - 11/19/17 10:04 AM Re: 315 Square setup E-body `Cuda [Re: Frankenduster]
MoparCar Offline
member

Registered: 07/21/05
Posts: 118
Loc: Colorado
Maybe I'm missing this, but what backspace are you running up front and with or without any spacers?

Thanks, Wes

Top
#2418211 - 12/13/17 08:14 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
RylisPro Online   laugh2


Registered: 06/18/07
Posts: 2160
Loc: NorCal
More plans for the `Cuda next year!


18x11 Forgeline GTD1 5-lug in Graphite powdercoat with knurled bead

Stay tuned!
_________________________

/Drive
Instagram: @rylispro
YouTube:RylisPro
www.rylispro.com
925-214-9192

Top
#2418503 - 12/14/17 12:18 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
MuuMuu101 Offline
I got lucky at Woodward!

Registered: 12/12/10
Posts: 12162
Loc: Covina, Ca
What are the specs on your current wheels?
_________________________

68 Dart GT Project Thread: Linky!

Top
#2419003 - Yesterday at 11:31 AM Re: 315 Square setup E-body `Cuda [Re: MuuMuu101]
RylisPro Online   laugh2


Registered: 06/18/07
Posts: 2160
Loc: NorCal
Hey Samy!
I don't give out the specs to my wheels due to all the variation with suspension parts, fender clearance, leaf spring location etc. Even with E-bodies there is great variances between the Cuda vs Chally, any car built in the 70's for that matter.

The specs on my wheels really only fit my setup with 295 tires and also need a few millimeters more to get the "perfect" offsets for 315's. I actually found out that on hard cornering the 315's just barely rubs on the rear leaf springs. I'm going to need to use 3mm spacers as well as rolling the rear fenders for these current wheels. My next setup of wheels will have corrected offsets for 315's R-comps.

If I gave out my specs it doesnt really help anybody and I wouldn't want to get blamed for not fitting their car. One has to get a ruler and measure for their specific application. As always I will help you or anyone else with the correct sized wheels to get the maximum amount of tire underneath.
_________________________

/Drive
Instagram: @rylispro
YouTube:RylisPro
www.rylispro.com
925-214-9192

Top
#2419265 - Yesterday at 08:52 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
NV69B7RR Offline
master

Registered: 11/08/06
Posts: 5674
Loc: Reno, Nevada
Your rim game is strong! Forgelines... drool drool drool
Can't wait to see the new look.
_________________________
68 AMX track car
72 Demon 340
71 Duster 340 Resto http://board.moparts.org/ubbthreads/show...part=1&vc=1

Top
#2419529 - Today at 02:30 PM Re: 315 Square setup E-body `Cuda [Re: RylisPro]
UCUDANT Offline
Troll Hunter

Registered: 01/20/03
Posts: 7658
Loc: New Mexico
Why cant I see the photo's? I am very interested in seeing if I can get 315's under my car.

Here's my set up http://www.moparts.org/Tech/Archive/rearsusp/12.html

I run 15X10" wheels with 6" of backspace

Top
Page 3 of 3 < 1 2 3

Advertisement
Sponsored Link
Forum Stats
25,004 Registered Members
32 Forums
185,358 Topics
2,147,778 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Bob Glidden
by scottb
34 minutes 24 seconds ago
A clean car w/ Hemi and a 4spd for $43.5K
by UCUDANT
Today at 09:08 PM
Electrical question 70 challenger
by jh27-1970
Today at 06:56 PM
1970 318 mating to 1963 727
by MoPar
Today at 06:27 PM