Re: Oiling mods, ideas
[Re: HotRodDave]
#2356338
08/19/17 12:48 AM
08/19/17 12:48 AM
|
Joined: Jun 2003
Posts: 9,225 Charleston
sixpackgut
Drag Week Mod Champion
|
Drag Week Mod Champion
Joined: Jun 2003
Posts: 9,225
Charleston
|
I hate the milodan pan that doesnt have notches in it.
Dave Barton asked me if I wanted oil restricted to the lifters. I said sure and asked how he goes about doing that. He said he wouldnt tell me
My new shortblock
Last edited by sixpackgut; 08/19/17 12:50 AM.
Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram
performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs
|
|
|
Re: Oiling mods, ideas
[Re: WO23Coronet]
#2362498
08/30/17 08:08 PM
08/30/17 08:08 PM
|
Joined: Jan 2006
Posts: 1,400 Trumbauersville PA
ric3xrt
pro stock
|
pro stock
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
|
Why would you want to restrict oil to the lifters? Keeps more of it for the mains? That's one reason. On the lifters, one old school trick will work nicely, Slide a copper tube in the passage way peen it down where the lifter rides. This weekend I'll post a photo of what I talking about. The kid who works for me, filled the window above the lifters to stop drain back over the crank. He did a few other things to the block, I will talk to him tomorrow and find out what else he has done.
|
|
|
Re: Oiling mods, ideas
[Re: sixpackgut]
#2363400
09/01/17 12:22 PM
09/01/17 12:22 PM
|
Joined: Jan 2006
Posts: 1,400 Trumbauersville PA
ric3xrt
pro stock
|
pro stock
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
|
I hate the milodan pan that doesnt have notches in it.
Dave Barton asked me if I wanted oil restricted to the lifters. I said sure and asked how he goes about doing that. He said he wouldnt tell me
My new shortblock great looking short, Arrow's web site seams to be down anyone what's up with them?
Truth has no agenda, but those with an agenda make their own truth. Some of us are so open minded they only see their View
|
|
|
Re: Oiling mods, ideas
[Re: HotRodDave]
#2364628
09/03/17 03:14 PM
09/03/17 03:14 PM
|
Joined: Jan 2006
Posts: 1,400 Trumbauersville PA
ric3xrt
pro stock
|
pro stock
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
|
Oil drain back, there's a bottleneck were the cylinder side joins the bottom section, 1st pic is stock, 2 and is where I take 1/2 drill round off the intersection from the pan side.
Last edited by ric3xrt; 09/03/17 03:15 PM.
Truth has no agenda, but those with an agenda make their own truth. Some of us are so open minded they only see their View
|
|
|
|
|