What's a good price for a Std. bore 440 HP block complete except no intake and manifolds? Looked at one locally but wasn't sure if price was too high.

Thanks in advance

$500-$1500 depends on condition/completeness

Joe welcome here. what are they wanting for it? more info on condition/whats missing etc

They're looking for $1500. bores look clean with no ridges and it turns over by hand nice and smoothly. Has heads disassembled and no intake or exhaust.

IMNHO that is WAY too much money.

too much for a rebuildable core

It's not worth that as an engine, but it's worth it if you have a 1970 that needs an HP 440and the engine build date is before the car assembly date. It wouldn't be numbers matching but it would be as close as you could get.

If you just want a 440 to build it is way too much.

There are very few things that make an HP engine. Camshaft is larger, it's a 3-bolt cam, HP valvesprings, the stamp on the block, exhaust manifolds, carburetor.

Nothing in the list makes the block, heads, crank, or rods special, except the HP stamp. I'd guess pistons, too, but I'm not dead nuts certain.

Chrysler made four B engines for every one 440.

There should be a few more answers to the post.

R.

If it will make a .020-.030 overbore with a std crank and good heads, it is worth 1500 to someone who needs the big rods and balancer for a restoration. Hp stamp is worth something as well. If you just want a core to build a hot motor, look for a core in the 750 range.

what's the partial VIN stamping and/or the top pad?

Pad:
E440
6 17 HP (sideways A)

block:
5 21 69
2536430-10

Thanks All!

So the biggest difference is possibly not being external balanced just being a 69 engine.

1969 engine - no VIN? they built 1969 440 SIX PACK Super Bees that late

That is a 69 engine installed in a late 69 car. The E is the code for a 69 car. Look on the pan rail on the right side for a bunch of stamped numbers. It will have the vin number and we might could find the car it belongs to.

If that is the matching numbered engine to a 69 six pack Bee, it's worth a whole lot more than 1500 bucks!

that late in the model year may only have a partial VIN on the block.

That's a very late 69 motor so probably worth about $1000

Thanks all, I'll try and get the VIN. I appreciate all the help!

This is true. My a12 only has a partial vin. However, I think Dan can take the number off almost any block and tell us more about the car than I would ever think possible. Some day he may be able tell us the color of the car! Lol.

it was green, they were all GREEN!

Mark
Is your A12 motor the original?
Tom