Page 1 of 9 1 2 3 4 5 6 7 8 9 >
Topic Options
#23334 - 02/07/06 07:17 PM Weird MoPar interchangability.....
CrAzYMoPaRGuY Offline
I Live Here

Registered: 10/06/04
Posts: 16324
Loc: Canada
I remember hearing a 1969 Barracuda hood would directly interchange with a 1973-1976 Dart a long time ago, though I never actually tried it so I don't KNOW it's true.

Is there any other weird interchanging that can be done...?

When I tried B body Wilwood discs on my 1969 C body front end, I found out that although my C body spindles had the Wilwood hub 1/4" farther away from the hub's base- the inner and outer bearings were the same part # and the swap was relatively easy....
_________________________
CrAzYMoPaRGuY

Top
#23335 - 02/07/06 08:13 PM Re: Weird MoPar interchangability..... [Re: CrAzYMoPaRGuY]
Magnum Offline
master

Registered: 01/24/03
Posts: 5680
Loc: Hamilton, Ontario Canada
That same 67 to 69 Barracuda can interchange their front and rear bumpers.

Here's one I'm sure no one will ever use but it sure came in handy for me one time ago. Driveshaft from a 72 Dart 904, 7 1/4" perfect fit into a 79 New Yorker after 440, 727 and 8 3/4" swap.

Wheels of any LH car which is has a metric 5 x 114 mm will fit our 5 by 4.5". The center register is a nice snug fit too. Caution: Don't try this at home the offset is

2.2L K car alternator with V belt. Direct bolt in.
_________________________
69 Super Bee, 93 Mustang LX, 04 Allure Super

Top
#23336 - 02/07/06 08:37 PM Re: Weird MoPar interchangability..... [Re: Magnum]
KillerBee Offline
master

Registered: 01/20/03
Posts: 6439
Loc: N.E. Ohio
Door handles from 80's and 90's Dodge trucks will fit 68-70 B bodies.

Top
#23337 - 02/07/06 08:39 PM Re: Weird MoPar interchangability..... [Re: Magnum]
CrAzYMoPaRGuY Offline
I Live Here

Registered: 10/06/04
Posts: 16324
Loc: Canada
Haha!
Reminds me of my J body 1980 Cordoba LS- I met a guy at a swap meet, and talking with him, I told him I had an 8 3/4" rear end, a 440, and a 727 transplanted into my car.
He then told me to find a long box 70's ClubCab Dodge pickup, and take the rear half of the two piece driveshaft, and it would bolt right in.
Skeptical, I bought one at the wrecker, and sure enough.....
_________________________
CrAzYMoPaRGuY

Top
#23338 - 02/07/06 08:39 PM Re: Weird MoPar interchangability..... [Re: KillerBee]
ph23vo Offline


Registered: 01/21/03
Posts: 13128
Loc: renton, Washington
fury turn signal lenses fit superbirds...

Top
#23339 - 02/07/06 09:11 PM Re: Weird MoPar interchangability..... [Re: ph23vo]
stateline Offline
pro stock

Registered: 09/30/04
Posts: 1290
Loc: Under the big sky
Quote:

fury turn signal lenses fit superbirds...




They are super bird park lites )70 Fury III that is !

Top
#23340 - 02/07/06 09:20 PM Re: Weird MoPar interchangability..... [Re: stateline]
Rug_Trucker Offline
I Live Here

Registered: 01/19/03
Posts: 14568
Loc: Not2farfromNashville, TN
I just like the fact that my slant starter fits a Hemi
_________________________
"The only thing to do for triumph of evil is for good men to do nothing"

"NUNQUAM NON PARATUS!"

Top
#23341 - 02/07/06 09:27 PM Re: Weird MoPar interchangability..... [Re: Rug_Trucker]
Anonymous
Unregistered


Turn signal switch and canceling cam from up to 1976 Dodge Vans will work in a 65' Coronet Steering column.

Top
#23342 - 02/07/06 09:34 PM Re: Weird MoPar interchangability.....
68Cbarge Offline
master

Registered: 01/14/06
Posts: 3448
Loc: Canuckville
Where is the guy who put a 70 dart rear bumper/valence panel on his 76 dart??? :
He is usually in here.
_________________________
'68 Newport Custom Barge on a Budget!! BOAB
1973 Satellite WAGON! 318- 3 on the tree!!
2008 Chrysler 300c HEMI!

Top
#23343 - 02/07/06 09:40 PM Re: Weird MoPar interchangability..... [Re: CrAzYMoPaRGuY]
Jwilli500 Offline
top fuel

Registered: 01/20/03
Posts: 1990
Loc: Oklahoma City
I believe I read once upon a time that on a Chrysler Airflow, the right front and left rear doors will interchange as well as the left front and right rear. I know, not much use to most of us but I thought it was interesting!

Top
#23344 - 02/07/06 09:52 PM Re: Weird MoPar interchangability..... [Re: CrAzYMoPaRGuY]
Chris2581 Offline


Registered: 01/19/03
Posts: 6531
Loc: Jacksonville, FL
Dodge truck hood hinges are also the same as B-body hinges.
_________________________
Nautilus Racing-
We use Superformance gaskets and Turbo Action converters/products.

Top
#23345 - 02/07/06 10:04 PM Re: Weird MoPar interchangability..... [Re: Chris2581]
Anonymous
Unregistered


I found that a Ford door striker bolt from the parts store would replace my broken one on my '71 Plymouth Satellite.

Also, a Ford dust cap cover for the wheel bearings from parts store will fit also. The Mopar one was too small...

Top
#23346 - 02/07/06 11:35 PM Re: Weird MoPar interchangability.....
sthemi Offline
master

Registered: 06/07/04
Posts: 3302
Loc: Chicago Burbs
The console from the 60 s Dart was also used in the 70s darts..

Top
#23347 - 02/07/06 11:51 PM Re: Weird MoPar interchangability..... [Re: sthemi]
ScottSmith_Harms Offline
Mr Wizzard

Registered: 01/20/03
Posts: 42382
Loc: Spokane Washington
One of the 1970 Charger front bumper supports/brackets is the same exact part used on all 1966-71 Street Hemis as Alternator adjustment brackets.

Top
#23348 - 02/07/06 11:55 PM Re: Weird MoPar interchangability..... [Re: sthemi]
Anonymous
Unregistered


I'm taking note again keep on going

Top
#23349 - 02/08/06 01:13 AM Re: Weird MoPar interchangability.....
Erics5th Offline
UsedtobeSatellite6

Registered: 01/21/03
Posts: 3472
Loc: Lubbock, TX
Defroster vents from '71-up pickups and vans work on '63-'66 A bodys. Door arm rests from vans work on 4dr B bodys...probably others. The round dome light covers are found in alot of different models. Pedal dress up trim found on alot of Mopars work on B bodys. Remote trunk release from M bodys work on earlier cars. Inside door handles, window crank handles from trucks and vans work on B bodys.

Guess if it works, why change it?
_________________________
Eric 1984 Chrysler 5th Avenue Luxury Cop Car. 1996 Lexus ES-300 287K+ miles. Can't kill it!

Top
#23350 - 02/08/06 01:27 AM Re: Weird MoPar interchangability..... [Re: ScottSmith_Harms]
CokeBottleKid Offline


Registered: 01/19/03
Posts: 8006
Loc: San Marcos, CA
Quote:

One of the 1970 Charger front bumper supports/brackets is the same exact part used on all 1966-71 Street Hemis as Alternator adjustment brackets.




Get out.... really ? Got any pictures of this? That sounds neat...

Quote:

2.2L K car alternator with V belt. Direct bolt in.





hmmm what output rating do they have .


Edited by dbdartman (02/08/06 08:02 AM)
_________________________
Just me and The Haze now. It rusts in darkness... soon, soon <img src="/ubbthreads/images/graemlins/devil.gif" alt="" />


Top
#23351 - 02/08/06 01:33 AM Re: Weird MoPar interchangability..... [Re: CokeBottleKid]
RUNCHARGER Offline
I Live Here

Registered: 01/20/03
Posts: 15811
Loc: Chilliwack B.C. Canada
Those NOS Hemi 71 E-body door hinges actually came off a seventies Dodge Pickup.

Sheldon

Top
#23352 - 02/08/06 03:51 AM Re: Weird MoPar interchangability..... [Re: RUNCHARGER]
larry4406 Offline
mopar

Registered: 10/04/03
Posts: 438
Loc: Virginia
was told that the front left fender lower portion (body line and below) would interchange with the right rear quarter panel (body line and below) and same for other diagonal swap. This for plymouth cudas 70-74. have not tried this but eyeballing it it looks convincing.

Top
#23353 - 02/08/06 06:24 AM Re: Weird MoPar interchangability..... [Re: CokeBottleKid]
romanucci Offline
top fuel

Registered: 04/29/03
Posts: 1864
Loc: Butler, PA
Quote:

2.2L K car alternator with V belt. Direct bolt in.

hmmm what output rating do they have .




I'm curious about that one, too. Does the K-car alternator still have an external regulator? Is it one field wire or two?
_________________________
Stop Global Whining

Top
Page 1 of 9 1 2 3 4 5 6 7 8 9 >

Advertisement
Forum Stats
25,738 Registered Members
32 Forums
192,835 Topics
2,249,035 Posts

Most users ever online: 1,424 @ 06/20/18 07:18 PM
Moparts Newest Topics
1971 HEMICUDA HISTORY SEARCHING.. BS23R1B CAR
by 71redcuda
02/16/19 03:46 AM
6.4 BGE block
by HOTMOPR
02/16/19 12:11 AM
Couple Pertronix questions....
by gss
02/15/19 11:00 PM
Adopt a pet
by Superfreak
02/15/19 10:43 PM