Page 1 of 8 1 2 3 4 5 6 7 8 >
Topic Options
#2329615 - 07/01/17 09:30 AM For Sale - Big Block Engine - 3rd Quarter
moparts Offline


Registered: 01/19/03
Posts: 13760
Loc: Norwich CT USA
up

Top
#2329724 - 07/01/17 12:18 PM Isky Adjustable Iron Rocker Arms, Shafts & Hardware - Used [Re: moparts]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
This is a very nice set of Isky adjustable big block Mopar rocker arms, shafts, spacers and mounting hardware. These were run for a summer and are in great condition with very little wear. The shafts have sonce been cleaned including using a bottle brush on the insides, polishing the outside and installing new shaft end plugs. Rockers and hardware were degreased and inspected. Rockers and shafts show no galling. These are ready to install. Bolts and shaft hold downs are included but not pictured.

Price is $400 shipped in the lower 48 states. . I will ship internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com for more information or pictures.


Attachments
P1040544.JPG

P1040553.JPG




Edited by Rocket (07/01/17 12:19 PM)

Top
#2329768 - 07/01/17 01:33 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
mr_340 Offline
master

Registered: 01/20/03
Posts: 3272
Loc: DFW
SOLD.


Edited by mr_340 (08/19/17 12:16 AM)
_________________________
Floyd Lippencott IV

Top
#2329821 - 07/01/17 03:01 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Suregrip391 Offline
top fuel

Registered: 09/27/05
Posts: 1705
Loc: USA
1967 C440 HP Engine. Many extras included aside from the engine, It's apart for your inspection. (This is mostly complete less the 915 heads and con rods). From air cleaner and carb to oil pan & manifolds. I Can provide additional date codes or casting numbers and part numbers to those SERIOUSLY interested. Originally from a 67 GTX but perfect for a 67 Coronet RT too. The Block was cast on 10-7-66 and has an assembly date of 2-2-67. Many extra parts included for the price of $3600 such as a wood steering wheel ( not recall) , 67 alternator, 67 radiator, wiring, interior pieces, more... prefer to sell in one lot to one buyer. Serious only please, Pickup preferred, Located in NY. Thanks Moparts. Not a fire sale either. Pics to come or PM me please.

Top
#2329873 - 07/01/17 05:23 PM NOS Holley MECHANICAL Center, 6 Pack, 6bbl. Carburetor #4782 [Re: moparts]
hemi71x Offline


Registered: 01/20/03
Posts: 4790
Loc: Rancho Cordova, California (Sa...
I have an NOS, new in the box, Holley center, 6 Pack, 6 BBL, Mechanical carburetor, #4782 up for sale.
These carburetors were the competition, performance, race, carbs over the production street versions.
Rated at 500 CFM.
The fuel inlet is on the Left side of the float bowl, not like the production 340, 440, street versions.
The outboard carburetors did not have vacuum pods on them, hence the term mechanical carburetors.
Holley hasn't produced these in years, so they are very difficult to find, in this day and age.
$600.00 + Pay Pal, and FEDEX'ing with insurance, and signature delivery charges on the package.
That's the price.
Not interested in any "trades" low ball "offers" for this part.
Interested, serious buyers, send me a pm thru this forum.
Thank's
Jim V.


Attachments
Holley Mechanical Carb 001 (Small).JPG

Holley Mechanical Carb 002 (Small).JPG

Holley Mechanical Carb 004 (Small).JPG

Holley Mechanical Carb 005 (Small).JPG


_________________________

RF-4C Phantom 69-370 Zweibrucken, Germany

Top
#2329880 - 07/01/17 05:37 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
6PAX Offline
master

Registered: 01/20/03
Posts: 4433
Loc: Metro Detroit
Cal Custom El Toro air cleaner wing nut. $5

Used Crane cam #278-2. Cam only, no lifters. $75

Used chrome thermostat housing. $5

Four new extra wide chrome valve cover hold down clamps. $10 for the set

New exhaust manifold heat stove to air cleaner hose. $20

Cal Custom 14" aluminum air cleaner with filter. $100

1970 Big block single nipple oil breather with hose. $35

New 12" oval 4 barrel aluminum air cleaner with filter. It measures 12" L x 8 1/4" W x 3" H and has a 5 1/8" carb opening. $60

Cal Custom 9" finned air cleaner top and base. No filter. $75

Mr. Gasket 1" thick carb spacer. $15

137 Spectre brand radiator and heater hose clamp covers. Some chrome, some red and some blue anodized. Various sizes. $50 for the lot.

1972 400 parts. Oil pump $5, various AC brackets $50 for the lot, spark plug shields $15 pair, exhaust manifold heat stove for non-hp manifolds (needs a little straightening) $15. $50 for everything.

Carb. throttle linkage pin. $10

Pair of big block exhaust manifolds. Part numbers 3830800 & 3830820. $80

Pair of big block exhaust manifolds. Part numbers 2532626 & 2532464. $100

Pair of big block heads. Part number 2406516. $100

Prices do not include shipping. gt340 at yahoo.com


Edited by 6PAX (08/01/17 10:58 PM)

Top
#2330025 - 07/01/17 11:02 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: 6PAX]
markz528 Online   content
master

Registered: 01/20/03
Posts: 3199
Loc: Milford, OH
Used set of 8 KB Silvolite 1271 pistons, pins and locks for a 383. Standard bore size.

Summit 1271 Pistons

I removed these pistons from a stock 383. They do not have a lot of time on them and are in very nice shape. I can send more pics if requested.

$50 plus actual shipping. Please contact me via PM on this site.


Attachments
IMG_2442.JPG

IMG_2443.JPG

IMG_2444.JPG


_________________________
67 Coronet 500 9.610 @ 139.20 mph
67 Coronet 500 (street car) 13.300 @ 101.75 mph
69 GTX (clone) - build in progress......

Top
#2330045 - 07/01/17 11:30 PM 440/512 Short Block f/s [Re: 6PAX]
Dragula Offline


Registered: 05/02/04
Posts: 9982
Loc: Taxes R-US, NY
Sorry, looks like I might need this.

This is a 440 Source 440/512 engine with girdle and all good parts. It is a pump gas engine when used with Indy EZ1 heads. Comes in at 10.8:1...No cam or lifters as I borrowed that for my other engine, but cam bearings are like new. No oil pump presently, but a brand new Melling one can be installed for full asking price with my used Milidon cover and the 9 quart oil pan and line,

Freshened 2 seasons ago and only 11 passes on it this season. when it was pulled. Best Et was 9.70 at 138.5mph.

Can be freshened again at new owners expense. Hone still looks real good. Well taken car of.

Available items that can go with it for a little extra....

Port matched Indy 4500 intake
Port matched Indy 4150 intake
Milodon Oil pan and oiling system
Indy valley pan
MSD distributor
Quick Fuel Annular 950 carb

Could also be built with your your choice of cam at your cost...


Attachments
KIMG0246.JPG




Edited by Dragula (07/30/17 01:43 PM)
_________________________
'71 Duster Pump Gas 512RB
https://www.youtube.com/watch?v=Z_XTmRBuvWs (6.19)
https://www.youtube.com/watch?v=gQZGfDBPROM (9.70 at 138.5mph)

'70 Cuda NO Hemi, again
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.31)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

Top
#2330128 - 07/02/17 09:22 AM 1971+ Stock Big Block Heads [Re: moparts]
vinnyd76 Offline
super stock

Registered: 04/25/12
Posts: 757
Loc: Macomb, MI
For sale is a set of 383/400/440 stock heads with a casting number of 3462346. These heads are correct for a 1971 - 1973 Mopar. Please PM for additional info, pics, etc...

Price: $100 obo

Location: Metro Detroit

I can deliver to Carlisle.

Top
#2330524 - 07/03/17 01:40 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
dart4forte Offline
I Live Here

Registered: 01/31/03
Posts: 13698
Loc: Mesa, Arizona
Offenhouser duel 4 intake manifold, good shape. Comes with carb adapters

$250 plus shipping

Mesa, AZ


Attachments
SAM_1337.JPG



Top
#2330714 - 07/03/17 01:12 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
JSoph Offline
member

Registered: 06/28/11
Posts: 3
Loc: Kokomo Indiana
1978 400 bare block, $300. Block is standard bore. Bought to build as a stroker but have decided to go a different direction. Block is located in central Indiana and prefer local pickup. Call or text 765-437-5871


Attachments
100_4457.JPG

100_4458.JPG

100_4459.JPG



Top
#2330892 - 07/03/17 04:55 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
CHALLENGER_KEN Offline
mopar

Registered: 01/20/03
Posts: 659
Loc: danville, IN USA
I will be bringing to Carslisle the following air cleaners 440-6 with front block off original not repo $600.00, 440-4 oval air cleaner original real not repo $600.00, 68-69 round 383 air cleaner $200.00.

If interested please call or text 1-317-709-3625
Thanks
Ken

Top
#2331028 - 07/03/17 07:44 PM 9/71 Casting date 440 Standard Bore Bare block with caps [Re: moparts]
70gtx440dana Offline
master

Registered: 12/27/03
Posts: 2657
Loc: Lansing, MI
I have a 9/71 cast 440 standard bore block. I just had it cleaned and magnafluxed at my local machine shop. Block checks out excellent with all bores showing standard size of approximately 4.32" at the top with very little noticeable wear. I am certain this block will clean up at .030" oversize. Top ID pad has had an area machined away. Will not affect function. I just spent $150+ on clean and magnaflux. $495/BO + shipping from 48837. I may be able to help with delivery to the Mopar Nats in August. Joe 517-243-7115 or jsawyer@wowway.com


Attachments
IMG_5608 (1024x768).jpg




Edited by 70gtx440dana (07/03/17 07:44 PM)
_________________________
70 Road Runner 383-4 4 speed FJ5 & black guts 70 Charger R/T 440-4 4 speed FJ5 & white guts

Top
#2331037 - 07/03/17 08:11 PM 413 Standard Bore Truck Bare block with caps [Re: 70gtx440dana]
64MAX Offline
member

Registered: 01/21/03
Posts: 144
413 truck/motor home block with caps, casting number 2658836, 8-11-69 date; FT 413 & 10 24 on pad; under-bored 426/440 block with thick cylinder walls and external strengthening ribs, sonic numbers available, $500; RB forged crankshaft from this motor, std., $125 Local pick up in Western MA. Possible delivery to Carlisle Best to email me at Malloryc1@roadrunner.com. Thanks for the ad Moparts!

Top
#2331310 - 07/04/17 10:39 AM Re: 413 Standard Bore Truck Bare block with caps [Re: moparts]
mopars4life Offline
super stock

Registered: 08/08/04
Posts: 718
Loc: Virginia
Comp Cams High Energy Timing Set - Big Block - New in the Box
I have a new high energy timing set- solid but single link. Retails for 45 but will sell for $35. Will be at Carlisle if want to save shipping. Moparsforlife@hotmail.com.
Link to album with pics:

pix.sfly.com/58x_qkS4

Summit Racings ad:
https://www.summitracing.com/parts/cca-3204

Top
#2331402 - 07/04/17 01:01 PM Valve Springs [Re: mopars4life]
cb1289 Offline
member

Registered: 09/01/07
Posts: 108
Loc: NJ
Brand new Edelbrock #5792 dual valve springs and #9644 retainers.
Specs from Edelbrock: 140 lbs seat, 1.88" inst.height, 317 lbs open press. @ .500" lift, od 1.550", id 1.120", coil bind 1.160"
Perfect springs for up to .600" lift flat tappet cams.

SOLD Thanks Moparts



Edited by cb1289 (07/18/17 10:12 AM)
_________________________
62 Dodge Dart Wagon 65 Plymouth Satellite

Top
#2331694 - 07/04/17 10:41 PM Re: Valve Springs [Re: cb1289]
Azzkikrcuda Offline
pro stock

Registered: 01/20/03
Posts: 1588
Loc: North Dakota
Used Smith Brothers 5/16 diameter .083 wall pushrods, ball and ball ends 9.390 length. Pushrods look new, was setup for 440 solid cam and Comp Pro Magnum rockers. Were $170 new, $100+shipping

PM me here if interested.


Attachments
pushrods 001.JPG




Edited by Azzkikrcuda (07/27/17 08:41 PM)
_________________________
The only Carbs I care about are under the hood!

Top
#2331773 - 07/05/17 05:55 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
mosweethemi Offline
mopar

Registered: 12/31/07
Posts: 618
Loc: VA.
For sale a 1970 440 six pack set up NOS center carb with New out board carbs all new acc , NOS air cleaner . Complete set up ready to bolt on your 440 engine $2500.00 ,Also NOS PCV Valves and more .Will have them at Carlisle next week ,July 14-15-16-17 I,am row I72-I78 I have tons more Mopar parts for sale .

Top
#2331822 - 07/05/17 09:45 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
gtxblu Offline
top fuel

Registered: 06/21/04
Posts: 1737
for sale a complete 1977 casting 440 engine minus 1 exhaust manifold, valve covers, and water pump housing. $400.00. 1-734-775-0738. located south of Detroit.


Attachments
P7030854.JPG

P7030856.JPG



Top
#2332368 - 07/06/17 08:00 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: gtxblu]
MI Mopar Works Offline
mopar

Registered: 12/24/15
Posts: 415
Loc: MI
1969 model standard bore 440 HP2 block with main caps. This block has been cleaned and magged, came back good. Block has a slight ridge at the top of all 8 bores that will clean up easily at .030 over. Stock deck height, all bolt holes and threads clean, no surprises. Also has ARP main studs loosely installed that are included. The casting date is 11/6/68, assembly date is 1/9/69, VIN is from a 69 Charger R/T VIN#XS29L9B266440. This is a hard to find block in excellent condition. Delivery to Carlisle or the Nats possible. Asking $600 OBO. Call Dave (734)624-2212 or pm me here.


Attachments
694405.jpg

694401.jpg




Edited by MI Mopar Works (07/26/17 03:26 PM)
_________________________
MI Mopar Works
Parts Sales
Restoration and detailing of all kinds of mopar hardware
https://www.facebook.com/MIMoparWorks/


Top
#2332550 - 07/06/17 01:24 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
ChargerCrazed Offline
enthusiast

Registered: 01/06/04
Posts: 307
Loc: NY
8 Used 440 Piston/Rod Assys.
Pistons = TRW/Seal Power L2295 .030
Rods = LY 1851535 with ARP bolts installed & rods resized.
Piston tops have been blasted, skirts have some wear (worst is shown in last pic), all bottoms have file marks from pistons being removed from a different set of rods.
$365.00 plus shipping.
If interested or need pics, please email: chargercrazed@usa.com

Free Delivery to Chrysler at Carlisle, PA on July 14 & 15 when Prepaid.



Edited by ChargerCrazed (07/06/17 01:25 PM)

Top
#2333113 - 07/07/17 01:10 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
Jesel Belt Drive
KDD 42100
Big Block Mopar
Like New! Only used on a Dyno one time
$ 500

Located in Walkertown NC
(Winston Salem)
Pm me here or
Contact Mark
office 336-595-2000
Cell 336-399-7262

[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2333117 - 07/07/17 01:16 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
2 Cross Ram Mopar Air Cleaners
$400 for both

Located in Walkertown NC
(outside Winston Salem)
PM me here or
Contact Mark @
Office 336-595-2000
cell 336-399-7262 [img:center]http://[/img]
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2333120 - 07/07/17 01:20 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
1963-1964 AFB Rebuilt Carburetor # 42005
$150

Located in Walkertown NC
(Outside Winston Salem NC)
PM here or
Contact Mark
Office (336) 595-2000
Cell (336) 399-7262
[img:center]http://[/img]
[img:right]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2333122 - 07/07/17 01:25 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
Max Wedge Heads with Valve Covers
$1500
Located in Walkertown NC
(Outside Winston Salem NC)
PM here or
Contact Mark
Office (336) 595-2000
Cell (336) 399-7262
[img:center]http://[/img] [img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2333742 - 07/08/17 04:51 PM . [Re: moparts]
court9155 Offline
enthusiast

Registered: 04/16/08
Posts: 301
Loc: Discovery Bay, Ca
.


Edited by court9155 (07/10/17 05:00 PM)
_________________________
67 charger

Top
#2334294 - 07/09/17 05:47 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
mike337 Offline
super stock

Registered: 04/17/03
Posts: 1191
Loc: Hurricane, WV
Holley Carb1301 List #4360 used on 1970 440 Engines with automatic & ECS. $50. Can be reached at moparzone4@aol.com
Thanks for the ad Moparts!


Attachments
Holley Carb List 4360.b.jpg



Top
#2335339 - 07/11/17 12:45 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Dart451 Offline
mopar

Registered: 01/14/04
Posts: 457
Loc: IL
4 barrel intake and Holley off a 77 400 $125 plus the ride will separate.

Misc 400 parts what you need? Engine had 56k when I drove car home, used the block for new stroker.

Also not pictured factory 383 4 barrel intake off a 69 fury, will get part number if any interest.

PM me here

Thanks Moparts


Attachments
carb.jpg

intake.jpg

engine parts.jpg



Top
#2336633 - 07/13/17 05:59 PM 1962 413 topend for sale [Re: Dart451]
ou812 Offline


Registered: 01/31/03
Posts: 5300
Loc: SoCal
Untouched, virgin 413 wedge top end...Closed chamber heads complete, rockers with stands and bolts, valve covers, pushrods, intake manifold and carb.
Really looking to sell as a complete kit, but I would consider parting it out possibly. I also have the exhaust manifolds as well...
Complete with shipping anywhere in the Cont. U.S. I'm asking 950.00 for all of it.

Brian
mxnaked@yahoo.com

https://scontent-lax3-2.xx.fbcdn.net/v/t...amp;oe=5A0EF1B6
_________________________
Brian Hafliger

Top
#2336767 - 07/13/17 11:59 PM Six Pack setup [Re: moparts]
AndyF Online   content
Too Many Posts

Registered: 01/20/03
Posts: 23039
Loc: Oregon
SOLD


Attachments
DSC_0892 (Large).JPG

DSC_0894 (Large).JPG




Edited by AndyF (07/21/17 02:48 PM)

Top
#2336906 - 07/14/17 12:21 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
crabman173 Offline
master

Registered: 01/01/06
Posts: 3536
Loc: Big Lick , North Carolina
Fresh 440 Build
06-06-1968 casting steel crank LY rods Wiseco forged edelbrock Perf rpm new hemi pan 465/488 hyd 452's with mild Bowl Port new distributor from Rick Ehrenburg very nice 440 ready to drop in and go now cheapo shipping available $ 4500--call me 704 244 6649 Thanks


Attachments
440JULY$$$$ 009.JPG

Description: 3




Edited by crabman173 (07/14/17 12:22 PM)
_________________________
I have always had a fascination with fast cars at the expense of more normal character development

Top
#2336942 - 07/14/17 01:48 PM SOLD Flowkooler Water Pump 1679 $65 plus shipping [Re: moparts]
Adam71Charger Offline
pro stock

Registered: 06/01/13
Posts: 1460
Loc: Tacoma, Washington USA
**SOLD**
**SOLD**
**SOLD**
**SOLD**

New, never used in box flowkooler water pump. Bought it from summit racing for a little over $110. I havent used it yet it is still in box unopened. I would like $65 plus shipping.

If I take it out of box, it should fit in a usps medium flat rate, but Im not sure as I dont want to take it out of box until I have a solid buyer. Even if Its kept in box, it shouldn't cost much to ship it is very light and small.

As usual, I prefer you use the 'send money' option in paypal. If you'd like to pay the fee I get charged when you select the 'buy goods and services' option I will accept.

PM me or call/text 253 691 4880

https://www.amazon.com/photos/share/rXC7jt1HYBdt0pnSBNUgbOyIlCRk0Alf5hKTpAqlZU4


Edited by Adam71Charger (07/18/17 02:50 PM)

Top
#2337535 - 07/15/17 05:50 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
cdp Offline
master

Registered: 01/31/03
Posts: 3350
Loc: MO
NOS/New. 383 .030 part number 2257P-federal mogul/sealed power forged pistons. Matched set of 8, I think the L2315's are superseded replacements with 1.920 compression height.

$250/ plus shipping.

PM me here,
or text/call 816-726-4fiveonetwo.

Thanks
Chris


Attachments
20170715_094921.jpg

20170715_094943.jpg




Edited by cdp (07/16/17 07:34 PM)

Top
#2337865 - 07/16/17 03:06 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Penastar Offline
member

Registered: 02/09/09
Posts: 4
Loc: Ohio
For Sale: 400 Stroker, 4-bbl carb, have paperwork on parts and work done. Engine in car, plan to attend Mopar Nats, will be in car corral. Contact information: Tom @ 419-733-3104.




Edited by Penastar (07/16/17 03:09 PM)

Top
#2339016 - 07/18/17 10:56 AM 1969 440 core from New Yorker [Re: moparts]
roadntrack Offline
enthusiast

Registered: 07/27/04
Posts: 376
Loc: USA
1969 Chrysler 440 from a New Yorker
block cast 1-17-69
stock un-cut bores
stock un-cut steel crank
906 heads
etc etc
have most parts to complete assy

$700 delivered to Nats
Send me a PM please


Attachments
1969 440 BLOCK.jpg

1969 440 CRANK.jpg



Top
#2339053 - 07/18/17 11:27 AM Re: 1969 440 core from New Yorker [Re: roadntrack]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
NOS/NORS TUNE UP KIT,V8 SINGLE POINT DODGE&PLYMOUTH 1962-1971 318-340-360-361-383-440 WITH ALUMINUM SINGLE POINT DISTRIBUTOR

INCLUDES A MADE IN THE USA NORS ,TAN,HD,RIBBED,DISTRIBUTOR CAP,NON VENTED REPLICA OF THE #2444507 MOPAR ORIGINAL CAP(# WAS ON THE INSIDE of the mopar cap, this cap does not have any# )

NOS MOPAR ROTOR W# ON IT

NOS MOPAR CONTACT POINTS WITH# ON IT &PENTASTAR

NOS MOPAR CONDENSER WITH #

WILL FIT;

1962-1972 (CORRECT FOR 1966-1972) AS EARLY 65 AND DOWN HAD A BLACK CAP, 361-383-413-440 V8S WITH AN ALUMINUM SINGLE POINT DISTRIBUTOR$50
cowgerwilliam035@gmail.com


Attachments
dddd 001.JPG

dddd 010.JPG

dddd 011.JPG

dddd 002.JPG



Top
#2339059 - 07/18/17 11:32 AM Re: 1969 440 core from New Yorker [Re: Joesixpack]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
MOPAR V8 USA MADE 1973-1974-1975-1976-1977-1978 400-440 ELECTRONIC IGNITION TUNE UP
MOTORCRAFT NORS ORANGE HP IGNITION WIRES
NORS TAN,HD,RIBBED DISTRIBUTOR CAP
NORS HD ROTOR
NOS MOPAR PCV$50
cowgerwilliam035@gmail.com


Attachments
340electronic 001.JPG

340electronic 004.JPG

340electronic 006.JPG

340electronic 002.JPG



Top
#2339062 - 07/18/17 11:35 AM Re: 1969 440 core from New Yorker [Re: Joesixpack]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
NEW USA MADE REPRODUCTION brass insert NORS HD RIBBED,TAN DISTRIBUTOR CAP&ROTOR
WILL FIT DODGE&PLYMOUTH 383-426H-440+6, DUAL POINT CAST IRON DISTRIBUTORS(and dc/mp mechanical advance electronic units) 1966-1971$50
cowgerwilliam035@gmail.com


Attachments
BRASSINSERT 001.JPG

BRASSINSERT 003.JPG

BRASSINSERT 002.JPG



Top
#2339070 - 07/18/17 11:42 AM Re: 1969 440 core from New Yorker [Re: Joesixpack]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
USA MADE TUNE UP PARTS

HD DISTRIBUTOR CAP,WITH TALL COIL WIRE TOWER,CARBON BRUSH

HD RIVETED ROTOR
2 DUAL POINTS
WIRE TYPE CONDENSER
WILL FIT ALL FRONT MOUNTED DESOTO ,DODGE,PLYMOUTH,CHRYSLER 361-383-413-426W-426H-440 CAST IRON DUAL POINT DISTRIBUTORS$25
cowgerwilliam035@gmail.com


Attachments
dualpoint 001.JPG



Top
#2339073 - 07/18/17 11:45 AM Re: 1969 440 core from New Yorker [Re: Joesixpack]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
NEW USA MADE REPRODUCTION NORS HD RIBBED,BLACK W BRASS INSERTS DISTRIBUTOR CAP&ROTOR
WILL FIT DODGE&PLYMOUTH 361-383-413W-426H-440+6, DUAL POINT CAST IRON DISTRIBUTORS 1962-1971$25
cowgerwilliam035@gmail.com


Attachments
DUALPOINTBRASS 001.JPG

DUALPOINTBRASS 002.JPG

DUALPOINTBRASS 003.JPG



Top
#2339075 - 07/18/17 11:47 AM Re: 1969 440 core from New Yorker [Re: Joesixpack]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
NORS USA MADE TUNE UP PARTS

DISTRIBUTOR CAP,ROTOR,2 POINTS&CONDENSER

FOR V8 ALUMINUM SINGLE POINT DODGE&PLYMOUTH

361-383-413-440 1962-1971 $20
cowgerwilliam035@gmail.com


Attachments
singlepoint 001.JPG

singlepoint 002.JPG



Top
#2339101 - 07/18/17 12:17 PM Re: 1969 440 core from New Yorker [Re: Joesixpack]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
new mopar performance chrome timing cover bolt kit 383-400-440 dodge$25
cowgerwilliam035@gmail.com


Attachments
4452795 001.JPG

4452795 002.JPG



Top
#2339911 - 07/19/17 05:03 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
dart440_72 Offline
enthusiast

Registered: 03/01/04
Posts: 265
Loc: Medina, OH
For sale: Holley HP EFI ECU.

Needed more I/O's so I'm getting a Dominator and selling the HP. $800 OBO. Prefer local pickup to see unit run in car.

email: williamryai@gmail.com
can bring to the Mopar Nats



Edited by dart440_72 (07/19/17 08:19 PM)
_________________________
72 Dart 500" low deck Indy SR heads. 10.66 @124 best so far

Top
#2339976 - 07/19/17 06:49 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
maxie Offline
master

Registered: 08/18/03
Posts: 6964
Loc: Indiana
Indy Cylinder Heads Cast valve covers. New never bolted on.

PM me here through moparts.

Can deliver to Mopar Nationals
$225 plus shipping


Would use as trading material toward a 1969 383 N96 air cleaner assembly


Attachments
IMG_2070.jpg




Edited by maxie (07/26/17 04:48 PM)

Top
#2340047 - 07/19/17 08:58 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
bill440rt Offline
top fuel

Registered: 12/22/07
Posts: 2077
Loc: NJ, USA
SOLD


Edited by bill440rt (09/13/17 10:40 PM)

Top
#2340675 - 07/20/17 09:44 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
JudyLuvsBees Offline
enthusiast

Registered: 06/09/11
Posts: 279
Loc: New York
SOLD Brand new CRANE CAMS part # 64790-1 roller tip adjustable 1.5 ratio rocker arms, complete kit. These have been mounted on a 440 engine but never ran. Will fit other big blocks, possibly the push rods won't. There is no wear on any of the parts. Ball cup push rods are 9" long. The shafts have assembly grease on them.SOLD plus the ride
The rocker arm kit from a speed supplier is $$$$$ alone, the hold down are Mopar Perf for about $$$$$ the push rods had to have cost a least $$$$$$ Please look closer this is a great deal.
SOLD
THANK YOU MOPARTS


Attachments
20170720_202645.jpg

20170720_202716.jpg

20170720_202806.jpg

20170720_202814.jpg




Edited by JudyLuvsBees (08/11/17 09:49 PM)

Top
#2340707 - 07/20/17 10:12 PM BIG BLOCK ALUMINUM WATER PUMP [Re: moparts]
72N96RR Offline
I LOVE WEDGIES

Registered: 07/20/05
Posts: 11583
Loc: SHELBY TWP,,MICHIGAN
for sale brand new EDELBROCK high volume aluminum water pump...has larger impellers for more flow and less cavitation...special curve to increase volume.. gasket included AND I think the hardware too..
..fits big block mopars..possibly other applications?? PM me here email at directhit44@hotmail.com....thanks..James
sold sold sold sold thanks moparts


Attachments
IMG_1657.JPG




Edited by 72N96RR (08/20/17 03:17 PM)
_________________________
1972 Road Runner / GTX 440 4spd Dana 3.54 Just about to turn 26K original miles..

A boat, a GMC truck, some Craftsman Tools, LOTS of Zombie Protection, and a few Goldfish..

If you love someone set them free..
If they come back it means nobody else wanted them either..!!

Top
#2341733 - 07/22/17 09:22 PM factory Intake 361 383 413 440 [Re: Furys]
davesmopars Offline
master

Registered: 08/01/04
Posts: 2713
Loc: cheshire, ct
factory Intake 361 383 400 413 440
and a couple of aluminum
30.00 and up plus shippingfactory
3512100 - 71 340 110.00
3671918 - 72 73 340 50.00
3698434 - 74 360 50.00
3671918 - 72 73 340 50.00
3462848 - 70 340 120.00
2806301 - 68 69 383 80.00
2806301 - 68 69 383 80.00
3830733 - 74 76 440 40.00
3698444 - 73 440 40.00
3698444 - 73 440 40.00
2806178 - 67 68 69 440 90.00
2206000 - 62 63 64 65 66 413 426 440 90.00

aluminum
Torker 440 professionally ported real nice work 150.00
Weiand 440 tunnel ram with 2 660center squirters air cleaners and linkage 750.00
edelbrock db4b 383 150.00 one carb hole enlarged
edelbrock LD340 center performance mod done 350.00
mopar M1 w2 intake 250.00
edelbrock victor w2 intake 250.00
offenhauser early 273 intake 150.00
Weiand Say Why And - 440 413 426 175.00


Attachments
fullsizeoutput_1a2f.jpeg




Edited by davesmopars (07/24/17 12:19 PM)

Top
#2341929 - 07/23/17 11:23 AM Re: factory Intake 361 383 413 440 [Re: davesmopars]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
361-383-413-426W-426H-440+6 NOS TUNE UP KIT
IBK-1003 Made in the USA on top black dual point AUTOLITE/PRESTOLITE cap
IBK-1016 ROTOR
NOS IBB-2042S PRESTOLITE COND
2 NOS PRESTOLITE (W/LOGO) DUAL POINTS
$50
cowgerwilliam035@gmail.com


Attachments
IBK1003 001.JPG

IBK1003 003.JPG

IBK1003 005.JPG

DUALPOINT 004.JPG




Edited by Joesixpack (07/28/17 11:13 AM)

Top
#2342344 - 07/24/17 09:28 AM Re: Harland Sharp Big Block Roller rockers [Re: moparts]
shooter Offline
member

Registered: 07/24/12
Posts: 18
Loc: massachusetts
FOR SALE NOS 426 wedge short block This is a factory 365HP it was disassemble and blue printed including high-speed balance $4500.

Top
#2342556 - 07/24/17 03:27 PM 1970 383 engine and auto trans. cast 9-19-69 [Re: moparts]
5carguy Online   content
top fuel

Registered: 01/18/06
Posts: 1698
Loc: Lee Co. Fla.
I have for sale a 383 engine and matching automatic transmission.Complete except for carb.These were removed from a 1970 Challenger.Casting date on engine 9-19-69.SN on engine OB150988 and SN on trans OB150988.These don't appear to have ever been apart.Turns over easily.$500.00 for both
Local pick up please.Located in S.W. Florida.
PM here or Rtroyer1@comcast.net

Thanks for the free ad Moparts

Top
#2343138 - 07/25/17 02:35 PM Re: 1970 383 engine and auto trans. cast 9-19-69 [Re: moparts]
csmopar Offline
member

Registered: 07/30/06
Posts: 167
Loc: usa
1968 Mopar 440 block and main caps. Standard bore. 300 obo plus shipping(really prefer pick up on this). This block is a good core block, it will need bored as there is some light surface rust in the bores from sitting. .030 should more than get it. PM me for pics. Location in Southern Indiana.

Top
#2343422 - 07/25/17 10:22 PM Re: 1970 383 engine and auto trans. cast 9-19-69 [Re: moparts]
A39Coronet Offline
member

Registered: 12/18/16
Posts: 198
Loc: Moon, Pa
440 standard bore block. Small 1" long crack near center freeze plug that can either be welded or fixed with hardblock. Was keeping as a backup race unit but am downsizing. $125 obo Can meet at the Mopar Nat's for anyone who does PayPal.

Top
#2343697 - 07/26/17 12:23 PM Mopar 440 Short Block and Parts [Re: moparts]
Dean1967 Offline
member

Registered: 06/04/17
Posts: 12
Loc: Michigan
I have a 2-19-77 440 short block and lots of parts to go with.
The block is .020 over with KB Hyperecutectic pistons, steel crank, LY rods with ARP bolts and internally balanced. The block has been stress releaved, cleaned, deburred inside and out and magged. New freeze plugs, cam bearings and dist drive bushing. The oil system has been heavily reworked for better oiling. The high volume oil pump has been reworked as well. The rings are perfect circle file to fit. The main bearings are seal power 1/2 groove, rods are also seal power. Installed is a P4120659 mechanical flat tappet cam (.525/.525 with 284/284 duration at .050). 9-3125a Cloyes cam adjust timing chain and gears (Cam still needs to be degreed in) One set of 906 heads baked and blasted (bare) needs a couple heli coils (see pics)

The following parts are all new in boxes.

16 - P5249848 springs (.480 to .540 lift)
8 - P5249202 1.81 exhaust valves
8 - P5249200 2.14 intake valves
16 - P2843177 lifters
16 - P4007187 Titanium retainers 10*
32 - 10* hardened keepers
145-3606 ARP head bolt kit

$2500 or best
PM me or nitrousoxcide@hotmail.com

http://s1378.photobucket.com/user/Gtxtcyy1967/library/?view=recent&page=1


Attachments
440a.jpg

440c.jpg

440b.jpg




Edited by Dean1967 (08/16/17 05:00 PM)

Top
#2343995 - 07/26/17 09:51 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
rtsinc Offline
mopar

Registered: 05/09/05
Posts: 648
Loc: ill,usa,belvidere
1971 440 block casting number appears to be 2536430-9 date appears to be 1-14-71 removed from a C Body car. $500.00 for the block only. please try to pick up. not excited to try to ship. i do have some heads off a 70 six pack engine, and i think i have a crank shaft. 815 520 3227 call me (rich )and no bartering over the phone.


Attachments
1971 block 001.JPG

1971 block 003.JPG



Top
#2344329 - 07/27/17 12:11 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
Original 1970 440 SIX PACK 4-speed dual point distributor, The shaft is tight but spins freely, I have tested the vacuum advance, it pulls, I have installed a new lead wire, part #3438314, date code 44-9 $750.00 (708)288-2879 Scott


Attachments
parts 7-19-2017 006.JPG

parts 7-19-2017 007.JPG

parts 7-19-2017 008.JPG

parts 7-19-2017 009.JPG



Top
#2344804 - 07/28/17 10:56 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
Dual Quad Offenhauser Low Deck Intake

$350

Located in Walkertown NC
(Near Winston Salem)

Contact us @
shop m-f 9-5pm (336)595-200
After Hours (336) 399-7262

[img:center]http://[/img] [img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2344807 - 07/28/17 11:04 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
New! 440 Wiseco Pistons 55 Over Part# PTS531A55
$395

Located in Walkertown NC
(near Winston Salem NC)

[img:center]http://[/img]
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2344864 - 07/28/17 01:06 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: DudleyPerformanc]
redex79 Offline
pro stock

Registered: 08/26/03
Posts: 1396
Loc: MS
PVC and crank case breather, nice condition.
PVC-$15 each (SOLD)both
Breather $30


Attachments
DSC00069.JPG

DSC00068.JPG

DSC00071.JPG

DSC00072.JPG




Edited by redex79 (07/29/17 09:11 AM)
_________________________
Truckin Weekend !
70 Dodge Dart Swinger
11 Ram 1500 Laramie 4x4
15 Jeep Grand Cherokee

Top
#2345125 - 07/29/17 05:00 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
DrRoadRunner Offline
member

Registered: 06/12/05
Posts: 9
Loc: Southern Illinois
For Sale: Set of 8 new Keith Black Hypereutectic pistons, pins and locks KB237030-8 30 over for 440

$375 plus shipping from Highland, IL 62249

JY9785@gmail.com

Top
#2345615 - 07/30/17 08:29 AM Big block tunnel ram [Re: moparts]
Dean1967 Offline
member

Registered: 06/04/17
Posts: 12
Loc: Michigan
I have a RB Mopar WEIAND Tunnel Ram with (2) 1850-2 600 CFM Holley carbs. This unit has been in my basement for years. I have included with this sale a couple Holley rebuild kits. I figure they should probably be freshened up after sitting so long.

The 2 Matched Holley 600 carbs were rebuilt and modified for Tunnel Ram use.
1. They were Vat cleaned
2. Blown out with 150 lbs of air pressure
3. Bead blasted to remove old finish
4. The bodies have been powder coated sunrise gold
5. The bowls, metering blocks have been polished
6. Reassembled with Holley non stick blue gasket set

Modifications include....
1. Vacuum secondaries have been replaced with Quick Fuel Adjustable's.
2. The stock 25 shooters have been replaced with 29's
3. The secondary metering plates have been enlarged .002
4. The pump cam location has been changed to the #1 setting.

These modifications have worked well for me in the past as a good starting point for any dual quad setup. Of course you'll still have to make some tuning adjustments to fine tune them for you motor to maximize performance.


$800 or best.
PM me or nitrousoxcide@hotmail.com


Attachments
IMG_0482.JPG

IMG_0814.JPG




Edited by Dean1967 (07/30/17 10:49 AM)

Top
#2345684 - 07/30/17 11:01 AM Alternator Bonanza Check Numbers and Dates Codes [Re: moparts]
blewbyu Offline
master

Registered: 01/22/03
Posts: 3208
Loc: Florida
These are all rebuildable cores, may be able to use as is but being sold as cores.

2098830 23-63 Non original rear Brg. $ 50.00

All these are # 2642537

Date 29 - 68 All Original rear Brg Never Apart $200.00
Date 4? - 68 Non Original rear Brg Hard to read date $125.00
Date 4? - 68 Non Original rear Brg Hard to read date $125.00
Date 2 - 69 Non Original rear Brg $175.00
Date 5 - 69 Non Original rear Brg $175.00

2875714 Date 31 - 68 Non original rear Brg. $100.00
2875714 Date 22 - 69 Non original rear Brg. $100.00

2875724 Date 5 - 69 Non original rear Brg. $195.00

3438171 Date 35 - 69 Non original rear Brg. $125.00

3438178 Date 1 - 70 All Original rear Brg Never Apart $200.00

Plus shipping from Florida

blewbyu2bad@aol.com

Top
#2345789 - 07/30/17 03:31 PM Big block valve covers [Re: moparts]
Im4dux Offline


Registered: 01/17/14
Posts: 20
Loc: Ohio
Great shape. They came off of my 70 bee (putting back to stock). Will fit 383 and 440's $85. Can ship or deliver to the mopar nationals.


Attachments
IMG_0591.JPG



Top
#2346171 - 07/31/17 10:50 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
crabman173 Offline
master

Registered: 01/01/06
Posts: 3536
Loc: Big Lick , North Carolina
BIG BLOCK DOUBLE LOWER PULLEY For cars with power steering from 66-71 or so--these are reproduced at $60 a whack but here is a nice original just needs clean up--ex cond will also fit small blocks $35 shipped free Thanks dusterdave173@gmail.com


Attachments
addddd 021.JPG

Description: 7


_________________________
I have always had a fascination with fast cars at the expense of more normal character development

Top
#2346187 - 07/31/17 11:28 AM Engines, heads, H.P. Ex manifolds, intakes, etc [Re: Joesixpack]
GTX70sixpack Offline
top fuel

Registered: 03/05/06
Posts: 1611
Loc: Pataskala, Ohio
Clearing out anything that not earmarked for a project. 1966 440 complete oil pan to air cleaner, all accessories including A/C compressor, $550. 1970 383 H.P. out of a 70 Challenger R/T, pulled in 82 with 69k, no oil pan, $550. 915 heads, 906 heads, 440+6 cast iron intake w/carbs (new center carb), H.P. exhaust manifolds, valve covers. "Yard Sale Style" sale going on during Mopar Nationals weekend, near track and Reynoldsburg GTX70sixpack@insight.rr.com
_________________________
65 Belvedere II Station Wagon
69 Coronet R/T convertible
70 GTX
70'cuda
99 Dodge Diesel dually 4X4

Top
#2346405 - 07/31/17 08:26 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
AndyF Online   content
Too Many Posts

Registered: 01/20/03
Posts: 23039
Loc: Oregon
SOLD


Attachments
DSC_1010 (Large).JPG




Edited by AndyF (08/16/17 09:57 PM)

Top
#2346496 - 07/31/17 10:27 PM 1970 440 Sixpack distributor #2975982 [Re: AndyF]
Mopucky Offline
enthusiast

Registered: 03/18/13
Posts: 281
Loc: New York
Very early 1970 440 Sixpack distributor for an auto. Very good condition with a great original tag. $600 obo. Pm me if interested. Thanks.


Attachments
IMG_5583.JPG

IMG_5584.JPG

IMG_5585.JPG



Top
#2346840 - 08/01/17 05:19 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
viperblue72 Offline
top fuel

Registered: 08/23/06
Posts: 1780
Loc: junction city oregon

Quick Fuel 3 circuit dominator 1050. Good condition. 400
Selling because I'm changing direction to a 4150 setup.
Located in Oregon
541-223-2836
Chad


Attachments
IMG_1807.JPG




Edited by viperblue72 (08/12/17 09:41 AM)

Top
#2347031 - 08/01/17 09:59 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
68shifter Offline
super stock

Registered: 01/29/07
Posts: 1084
Loc: MI
Sold.
Thanks Moparts


Edited by 68shifter (08/03/17 10:09 PM)

Top
#2347116 - 08/02/17 12:46 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
One pair of 1973 400 and 440HP exhaust manifolds in nice used condition RH casting #3751074 date code A153, LH casting #3751068, date code 12,21,72, both manifolds are in nice used condition $350.00 for the pair (708)288-2879 Scott


Attachments
parts 8-1-17 009.JPG

parts 8-1-17 008.JPG

parts 8-1-17 012.JPG



Top
#2347216 - 08/02/17 10:11 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
1971 440HP 4-speed Carter AVS carb, date code G0, nice used original carb $300.00 (708)288-2879 Scott


Attachments
parts 8-1-17 014.JPG

parts 8-1-17 017.JPG

parts 8-1-17 015.JPG

parts 8-1-17 018.JPG



Top
#2347380 - 08/02/17 02:26 PM Hughes BB Mopar Victor Heads 1.7 Offset Intake Rockers [Re: dsd70bee]
BradH Offline
I Live Here

Registered: 01/30/03
Posts: 13218
Loc: Valhalla... eventually
*** SOLD ***


Attachments
Hughes Victor rockers.png




Edited by BradH (08/12/17 06:04 PM)
_________________________
Life's too short to waste time on dumb@ss internet pi$$in' contests...

Living by the motto “It’s just easier to keep buying parts than bother with actually putting them together” since 2010… or was it 2000?

Top
#2347524 - 08/02/17 08:25 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
ChrgrCuda Offline
super stock

Registered: 08/24/08
Posts: 730
Loc: Texas, USA
Used 906 Cylinder Heads removed from 1972 440. $300 plus shipping. Call or text me at 972-921-1470


Attachments
440 Heads 1.JPG

440 Heads 2.JPG

440 Heads 3.JPG

440 Heads 4.JPG


_________________________
68 Cuda Notchback [Email]10.86@120[/Email] 69 Charger R/T 440/505 2009 Challenger SRT8

Top
#2347963 - 08/03/17 02:02 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Rockland71GTX Offline
member

Registered: 04/04/08
Posts: 64
Loc: West Palm Beach, Florida
FOR SALE! Offenhauser 360° manifold for
RB engines. Nice condition.
Asking $175 obo + shipping from 33467


Attachments
$_1.JPG



Top
#2347967 - 08/03/17 02:07 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Rockland71GTX Offline
member

Registered: 04/04/08
Posts: 64
Loc: West Palm Beach, Florida
SOLD! Thanks Moparts😁

FOR SALE! Edelbrock Performer 440 manifold for
RB engines. Very nice condition!
This is unusual in that it doesn't have the EGR pad machined into it.
Much cleaner look!
Asking $150 obo + shipping from 33467.


Attachments
$_1-1.JPG




Edited by Rockland71GTX (08/09/17 11:36 AM)

Top
#2348316 - 08/04/17 07:17 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
crabman173 Offline
master

Registered: 01/01/06
Posts: 3536
Loc: Big Lick , North Carolina
SOLD!!!!!! Thanks Moparts!!440 FORGES SPEED PRO PISTONS NEW CHEAP!

I have a brand new set of TRW Speed Pro forged 440 pistons 030 over
These are flat tops , stock replacement, stock rod etc use 5/64ths stock type rings--Perfect for a cheapo 440 build--you can also spray the heck out of these indestructible slugs! Or..run forced induction $new at Summit etc near $400 I will take first $165 shipped FREE You can't beat this deal!!
Call or text me 704 244 6649 paypal OK
Thanks!!!


Attachments
pistons 003.JPG

Description: 9




Edited by crabman173 (08/05/17 07:08 AM)
_________________________
I have always had a fascination with fast cars at the expense of more normal character development

Top
#2348373 - 08/04/17 10:07 AM 1969 440 core from New Yorker [Re: moparts]
roadntrack Offline
enthusiast

Registered: 07/27/04
Posts: 376
Loc: USA
1969 Chrysler 440 from a New Yorker
block cast 1-17-69
stock un-cut bores
stock un-cut steel crank
906 heads
etc etc
have most parts to complete assy

$700 delivered to Nats
Send me a PM please


Attachments
MY PICS 031.jpg

MY PICS 028.jpg



Top
#2348601 - 08/04/17 05:26 PM Jones Cam Designs (Mike Jones) BB Solid Roller cam [Re: roadntrack]
BradH Offline
I Live Here

Registered: 01/30/03
Posts: 13218
Loc: Valhalla... eventually
This is a new BB solid roller from Jones Cam Designs (http://jonescams.com) intended for a fairly hot 440-ish c.i. street/strip application. It uses his inverse-radius endurance lobes and is spec'd at 259/261 at .050", .636"/.631", 109 LSA, .016" hot lash. These lobes can be used with up to 1.7 rockers, so you're not limited to running 1.5s.

I measured the lobes using .800"-wheel roller lifters in my 440 block:

Intake
Lobe - Duration
.0145 - 308 - - SAE duration @ .016" lash (.004" lobe lift above lash)
.020 - 295
.050 - 261 - - - 259 per cam card (increase from .800"-wheel vs .750"-wheel lifters)
.100 - 229
.200 - 180
.300 - 132
.400 - 57

Peak lift .424"
1.5 = .636"
1.6 = .678"

Exhaust
Lift - Duration
.0145 - 311 - - SAE duration @ .016" lash (.004" lobe lift above lash)
.020 - 297
.050 - 263 - - - 261 per cam card (increase from .800"-wheel vs .750"-wheel lifters)
.100 - 231
.200 - 181
.300 - 131
.400 - 54

Peak lift .421"
1.5 = .632"
1.6 = .674"


The cam is ground on a 109 LSA, and the suggested installed ICL is 106. Also, the #4 journal is grooved for full-time rocker shaft oiling, per my request when I ordered it.

It cost over $400, and Jones' cam prices have increased significantly since then. shock

The price is $330 shipped to the lower 48 US states. I accept USPS money orders and cash. Sorry, no PayPal or international sales.

Please PM me here, or text 7-zero-3 - 3-one-7 - 7-nine-8-seven... Thanks!


9.1.2017 - Someone asked what the build specs were provided to Jones Cams originally. Here's what I gave Mike Jones:

- Street/strip application
- 451 cubes
- 10.8 CR (93 E10 octane pump fuel)
- Ported Edelbrock Victor heads (std port, not MW)
- Single-plane intake w/ 950 4150 carb
- 2" headers w/ full 3" exhaust
- auto w/ 9.5" converter 4200-stall (4500 flash)
- 3800#s car & driver
- 4.10 gears & 28" tires
- max RPM 7000 (1/4 mile trap RPM)


Edited by BradH (09/01/17 01:32 PM)
_________________________
Life's too short to waste time on dumb@ss internet pi$$in' contests...

Living by the motto “It’s just easier to keep buying parts than bother with actually putting them together” since 2010… or was it 2000?

Top
#2348686 - 08/04/17 08:06 PM Edelbrock 6 carbs, Log style intake - Fits any big block [Re: Joesixpack]
HemiMark Offline
member

Registered: 10/13/05
Posts: 186
Loc: Pittsburgh, PA
440 log style Edelbrock intake, Polished and ready to install. comes with mounting bolts. Free delivery to Mopar Nationals $800.00 cash


Attachments
IMG_4802.JPG

IMG_4444.jpg




Edited by HemiMark (08/15/17 11:03 AM)

Top
#2349315 - 08/06/17 01:57 AM Re: Isky Adjustable Iron Rocker Arms, Shafts & Hardware - Used [Re: Rocket]
Turbo383 Offline
member

Registered: 02/19/07
Posts: 19
Loc: Florida
I'm interested in the rocker arms...

Top
#2349362 - 08/06/17 09:10 AM 1968 440 HP Manifold and Carb [Re: moparts]
floyd Offline
master

Registered: 01/20/03
Posts: 3299
Loc: MD
SOLD


Edited by floyd (08/13/17 02:41 PM)

Top
#2350081 - 08/07/17 12:38 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
CAK Offline
member

Registered: 08/16/07
Posts: 44
Loc: S.E.Mich
383 2 barrel intake, Stromberg carb, $100, Can deliver to the Nats, 313-805-0149

Top
#2350912 - 08/08/17 05:36 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
CompSyn Offline
super stock

Registered: 04/24/08
Posts: 1078
Loc: Pacific NW USA
SOLD!


Edited by CompSyn (08/09/17 03:15 PM)
_________________________
Project 1969 Plymouth Road Runner 383/727/3.23 F5

Top
#2350917 - 08/08/17 05:46 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
CompSyn Offline
super stock

Registered: 04/24/08
Posts: 1078
Loc: Pacific NW USA
Original Big Block Single Groove Crank Pulley - $85 Shipped!

_________________________
Project 1969 Plymouth Road Runner 383/727/3.23 F5

Top
#2350943 - 08/08/17 06:24 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: CompSyn]
CompSyn Offline
super stock

Registered: 04/24/08
Posts: 1078
Loc: Pacific NW USA
$275 Shipped!

Mopar Part Number #2891162 “BLISSFIELD” manufactured power steering cooler for 1969, 1970, 1971, and 1972 Plymouth and Dodge cars equipped with the following:

Saginaw, oval filler, power steering pumps
383, 400 and 440 engines
High Performance Axle Packages: A31, A32, A33, A34, A36
Axle Gear Ratios: 3.54, 3.55, 3.91, and 4.10
Plymouth: Cuda, GTX, Road Runner, Superbird,
Dodge: Challenger, Charger, Super Bee, Daytona, R/T, Coronet

There are 2 date codes on the bracket, 1889 and 1689.

A few years back there was a run of reproductions produced but the company producing them went out of business. So now the options to owning one of these coolers are to find a good used one or pay the big money for an NOS unit. Buy this good used power steering cooler for a fraction of the price that NOS ones are currently selling for today.

Please ask questions and verify before you buy. Get Real. Get Mopar!

Note: This listing is for the power steering cooler ONLY. The Saginaw power steering pump shown in some of the images is original to my 1969 Road Runner. The pump was posted as a representation of how the cooler mounts to the pump. The pump is NOT included in this listing.

Thanks for looking! Please check out my other ads for other great Mopar parts!


_________________________
Project 1969 Plymouth Road Runner 383/727/3.23 F5

Top
#2351334 - 08/09/17 11:51 AM 71-72 BB Heads [Re: HemiMark]
vinnyd76 Offline
super stock

Registered: 04/25/12
Posts: 757
Loc: Macomb, MI
SOLD

For sale are a pair of 383/400/440 stock heads with a casting number of 3462346. These heads are correct for a 1971 - 1972 BB Mopars. Please note the heads have been covered in WD-40 to prevent corrosion, which makes areas look a little dark. A majority of the grease/debris has been removed.

Price: $80.00

Location: Metro Detroit

I can deliver to the Mopar Nats. I have additional photos available.


Attachments
71-72 BB Heads_1.JPG

71-72 BB Heads_2a.JPG

71-72 BB Heads_3a.JPG

71-72 BB Heads_4.JPG




Edited by vinnyd76 (09/03/17 06:59 PM)

Top
#2351791 - 08/10/17 09:35 AM Re: 71-72 BB Heads [Re: vinnyd76]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
USA MADE , 4 NORS BLACK DUAL POINT DISTRIBUTOR CAPS,WITH TALL COIL WIRE TOWER, CARBON BRUSH, HD RIBBED INSIDE,MADE IN THE 60S-70S IN THE USA. 4 USA MADE ROTORS ALSO
WILL FIT;
DODGE,PLYMOUTH,CHRYSLER 1958-1971 CAST IRON SINGLE AND DUAL POINT DISTRIBUTORS 361-383-413-426W-426H-440 PRESTOLITE/CHRYSLER CAST IRON DISTRIBUTORS

ALSO FIT MECHANICAL ADVANCE MP/DC ELECTRONIC DISTRIBUTORS $50
cowgerwilliam035@gmail.com


Attachments
dualpointcaps 001.JPG

dualpointcaps 004.JPG

dualpointcaps 006.JPG

dualpointcaps 005.JPG



Top
#2351793 - 08/10/17 09:39 AM Re: 71-72 BB Heads [Re: Joesixpack]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
ALL PARTS ARE NEW , MAY HAVE BEEN REBOXED,NORS USA MADE MOPAR/DODGE/PLYMOUTH/CHRYSLER PARTS LOT

SEVEN IGNITION ROTORS(5 LOOSE NO BOXES),25 SINGLE POINTS SETS,7 STRAP CONDENSERS, 1 BALLAST RESISTOR,4 METAL,90 DEGREE PCV VALVES, WILL FIT 1962-1971 361-383-413-440 ALUMINUM SINGLE POINT DISTRIBUTORS.SOME OF THE POINTS HAVE SURFACE RUST ON THE STRAPS, WIPES RIGHT OFF. $40
cowgerwilliam035@gmail.com


Attachments
MOPAR 027.JPG

MOPAR 032.JPG

MOPAR 031.JPG

MOPAR 030.JPG



Top
#2351809 - 08/10/17 10:14 AM Re: 71-72 BB Heads [Re: Joesixpack]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
NOS/NORS V8 SINGLE POINT&ELECTRONIC IGNITION DODGE&PLYMOUTH 1962-1971 361-383-400-413-440

INCLUDES A MADE IN THE USA NORS ,TAN,HD,RIBBED,DISTRIBUTOR CAP,NON VENTED EXACT REPLICA OF THE #2444507 MOPAR ORIGINAL CAP(# WAS ON THE INSIDE)

NOS MOPAR ROTOR W# ON IT

WILL FIT;

1962-1972 (CORRECT FOR 1966-1972) AS EARLY 65 AND DOWN HAD A BLACK CAP,361-383-400-413-440 V8S WITH AN ALUMINUM SINGLE POINT DISTRIBUTOR

1972-1982 400-440 ELECTRONIC IGNITION

ALSO FITS ALUMINUM VACUUM ADVANCE MOPAR PERFORMANCE ELECTRONIC DISTRIBUTORS $35
cowgerwilliam035@gmail.com


Attachments
244507 001.JPG

244507 004.JPG

244507 009.JPG




Edited by Joesixpack (08/10/17 10:15 AM)

Top
#2351814 - 08/10/17 10:21 AM Re: 71-72 BB Heads [Re: Joesixpack]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
NEW USA MADE REPRODUCTION brass insert NORS HD RIBBED,TAN DISTRIBUTOR CAP&ROTOR
WILL FIT DODGE&PLYMOUTH 383-413-426H-440+6, DUAL POINT CAST IRON DISTRIBUTORS 1962-1971
also fits cast iron&aluminum mechanical advance DC/MP electronic distributors.$50
cowgerwilliam035@gmail.com


Attachments
BRASSINSERT 001.JPG

BRASSINSERT 002.JPG

BRASSINSERT 003.JPG

BRASSINSERT 005.JPG



Top
#2352082 - 08/10/17 06:56 PM 383 - 400 intakes [Re: Joesixpack]
HotRod20 Offline
mopar

Registered: 07/26/04
Posts: 678
Loc: Michigan
Edelbrock 383 Streetmaster $100.00 shipped to the lower 48
Edelbrock 383 Torker $100.00 shipped to the lower 48
1969 Factory #2806301 383 HP dated 2 19 9 $100 shipped to the lower 48

U.S.Postal Money order, or Bank cashiers Check only, no paypal.

HR 20


Attachments
383 streetmaster.JPG

383 torker.JPG

383 1969.JPG



Top
#2352602 - 08/11/17 07:27 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
jcastle1 Offline
super stock

Registered: 04/03/03
Posts: 894
Loc: Cincinnati,Ohio
POLISHED 383 6 barrel/ 6 pack intake manifold - excellent condition, just upgraded to RB motor and no longer needed
$300 I will be at the Mopar Nationals on Saturday until 1pm
you can call my cell or text
513-312-2038

thanks for the ad

John

Top
#2355187 - 08/16/17 10:01 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
AndyF Online   content
Too Many Posts

Registered: 01/20/03
Posts: 23039
Loc: Oregon
New 383 six pack intake. Brand new, hasn't been touched. I bought it years ago for my car but I've decided not to use it. $375 plus shipping. Check, MO or PayPal. PM on the board.


Attachments
DSC_0920 (Large).JPG




Edited by AndyF (08/16/17 10:02 PM)

Top
#2355260 - 08/17/17 12:27 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Menzaero Offline
member

Registered: 11/13/03
Posts: 173
Loc: Kansas
Sold-

Carter AVS 4738 For Sale - $50 Shipped

4738 C-4-AVS 70/O 440 A-134 (375HP) A/T (Cuda, Challenger R/T, Charger R/T, RR, Coronet R/T, Superbird, FuryGT, FuryS-23, Chrysler300, and GTX)

Location: Wichita, KS
PM or larog@aol.com


Attachments
IMG_2351.JPG

IMG_2352.JPG

IMG_2356.JPG

IMG_2354.JPG




Edited by Menzaero (08/17/17 09:50 AM)
Edit Reason: Sold

Top
#2355419 - 08/17/17 10:55 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
A-Body Radiator Big Block Dart
Rebuilt from Year One
like new condition
$275

Located in Walkertown NC
Right outside Winston Salem NC

Contact us
Shop:(336) 595-2000
Evenings:(336) 399-7262
[img:center]http://[/img]
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2355791 - 08/17/17 09:33 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
daryld Offline
member

Registered: 05/30/11
Posts: 8
Loc: NOLA
I am selling my Mopar 440/6 pack that was recently in my E body. This is a complete Mopar Performance crate engine with aluminum heads and dyno sheet showing 486 hp and 529 ft-lbs torque. This engine was purchased new from Carolina Machine Engines for around $7000 without the carbs which were another $2300. Also included are the Doug's headers, March serpentine system which includes A/C compressor, alternator and power steering pump with reservoir. Last is the vintage looking aluminum radiator. I am also including MSD coil and ignition. This is a total turn key engine with around 10,000 miles that is an absolute torque monster. I had the engine connected to a TKO 600 which I am keeping but will throw in the big block bellhousing if someone wants it. I have a video of the engine running before it was pulled and a dyno sheet that I can email to anyone who is serious. The engine is on a pallet and can be picked up during normal business hours M-F. Please email me if you are a serious buyer (dpduffy7@yahoo.com). I am only selling the engine because I am swapping to a Gen 3 Hemi. This is a cash only sale. Price is $5,500 for everything. This is a turn key engine package. Thanks for looking.

Here is the engine info link. It is the Big Block 440 460 hp Choppy 10 comp ratio package. With the 6 pack engine made 486 hp on the dyno.

http://www.cmengines.com/Engines/DynoTes...17/Default.aspx


Attachments
440 6 pack 5.jpg

440 6 pack 4.jpg

440 6 pack 1.jpg

440 6 pack 2.jpg




Edited by daryld (08/17/17 09:35 PM)

Top
#2356045 - 08/18/17 12:00 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
440 Wiseco Pistons 55 over
*New in the Box*
$395

Located in Walkertown, NC
Near Winston Salem NC

PM here
Email: mdpconsignment@gmail.com
Shop-(336)595-2000
Evenings-(336)399-7262
[img:center]http://[/img]
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2356337 - 08/18/17 10:47 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: DudleyPerformanc]
chooch Offline


Registered: 06/11/14
Posts: 134
Loc: pa
new in the box never used or taken out 440 source H beam rods 6760.
$450 shipped to the lower 48


Attachments
20170813_161558.jpg




Edited by chooch (08/18/17 10:48 PM)
_________________________
1974 pinto
1978 pacer
1987 yugo

Top
#2356339 - 08/18/17 10:49 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
chooch Offline


Registered: 06/11/14
Posts: 134
Loc: pa
8 nos 426 max wedge 11-1 60+ trw L2208 pistons with pins $550

also have some used 13-1 60+ & 13-1 std bore pistons with rods I"ll be posting soon..


Attachments
20170813_142137.jpg


_________________________
1974 pinto
1978 pacer
1987 yugo

Top
#2356341 - 08/18/17 10:50 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
chooch Offline


Registered: 06/11/14
Posts: 134
Loc: pa
for sale max wedge rods 7-886 & 1-535 all magged , resized , brass bushed , new arp bolts $550


Attachments
20170813_161333.jpg


_________________________
1974 pinto
1978 pacer
1987 yugo

Top
#2356519 - 08/19/17 10:46 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Duster499 Offline
member

Registered: 08/13/04
Posts: 166
Loc: SE MI
Indy Cylinder Heads SR 295. CNC ported by Indy. Valve Job and assembled by Modern Cylinder Head. 2.190/1.810 Valves. Comp 933 Springs, 1.970 Install, 150 lbs. New, never used. $2400 plus shipping for the pair.


Edited by Duster499 (09/04/17 09:17 AM)

Top
#2356522 - 08/19/17 10:48 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Duster499 Offline
member

Registered: 08/13/04
Posts: 166
Loc: SE MI
Indy Cylinder Head EZ 295. CNC ported by Indy. Valve job and assembled by Modern Cylinder Head. 2.190/2.810 valves. Comp 933 springs 1.97 install height 150 lbs. New, never used. $2000 plus shipping for the pair.


Edited by Duster499 (09/04/17 09:18 AM)

Top
#2356615 - 08/19/17 01:35 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: Duster499]
docr Offline
super stock

Registered: 08/24/06
Posts: 751
Loc: Indiana USA

For Sale:

1 Pair (R & L) - 1967 Dodge Coronet RT or Plymouth GTX
Chrome OEM 440 HP Valve Covers. They have all the wire/hose fittings
and baffles, and are in very good shape for 50 years old. No damage and little rust.
Need good hand cleaning and polishing.

Note: These are rare “one year only” - Difficult to find.

$190.00, includes shipping from lower 48 states.

E-mail only at sacdrose@att.net

***** THANKS MOPARTS.COM *****

Top
#2356620 - 08/19/17 01:38 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: docr]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
1969 440 HP automatic carter AVS carb #4618, date code L8, excellent core to restore $300.00 (708)288-2879 Scott


Attachments
part 8-19-17 003.JPG

part 8-19-17 005.JPG

part 8-19-17 006.JPG

part 8-19-17 008.JPG



Top
#2356691 - 08/19/17 04:15 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
cl440 Offline
top fuel

Registered: 02/05/03
Posts: 2312
Loc: S.E. Michigan
SOLD

Thermoqaud. I know nothing about it. $25.00 or obo plus the ride
chucklewis440@gmail.com


Attachments
1503173669669-1558952961.jpg




Edited by cl440 (08/20/17 11:58 AM)
_________________________


-------------------------------

Top
#2357172 - 08/20/17 02:40 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: cl440]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
FOR ALUMINUM V8 CHRYSLER,DODGE,PLYMOUTH DISTRIBUTORS, SINGLE POINT

NORS USA MADE TUNE UP PARTS&DISTRIBUTOR REBUILD KIT

HOLLEY DISTRIBUTOR CAP,ROTOR, DELCO POINTS&NOS MOPAR CONDENSER,DISTRIBUTOR PRIMARY LEAD&MOPAR NOS BUSING &REBUILD PARTS PACKAGE

FOR V8 ALUMINUM SINGLE POINT DODGE&PLYMOUTH 361-383-413-440 1962-1971 $50
cowgerwilliam035@gmail.com


Attachments
440TUK 001.JPG

440TUK 003.JPG

440TUK 005.JPG

440TUK 004.JPG



Top
#2357723 - 08/21/17 04:15 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
GTX MATT Offline
master

Registered: 06/05/06
Posts: 4726
Loc: CT
M1 RB Intake PN 4532174, brand new in box, never installed, decided to try a Performer RPM. Asking $255 plus shipping.

One of the corner on the carb pad was tapped through to the intake port, I've seen this on a few Mopar intakes before.


Edited by GTX MATT (08/21/17 04:17 PM)
_________________________
Now I need to pin those needles, got to feel that heat Hear my motor screamin while I'm tearin up the street

Top
#2357994 - 08/22/17 04:35 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
Vintage Donovan gear drive for big block Mopar and 426 HEMI, I do not have the cam gear or the crank gear, what you see in the pictures is what I have $275.00 (708)288-2879 Scott


Attachments
parts 8-21-17 003.JPG

parts 8-21-17 004.JPG



Top
#2358277 - 08/22/17 06:25 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: dsd70bee]
earthmover Offline
top fuel

Registered: 08/11/07
Posts: 2405
Loc: nc
Quarter [Re: dsd70bee]
earthmover Online content
top fuel

Registered: 08/11/07
Posts: 2388
Loc: nc
Je dome top 451 low deck piston in good shape went bigger on motor don't need the piston anymore 225.00
Eagle hbeams 676cc rods out of the 451 2 rods got hot from oil starving but was fought in time no spin bears at all arp bolts ..mopar bearing..went to different rods with Chevy bearing 175.00
Milodon gear drive not much run time used but in great shape 400.00
Went bigger cubic inches and different set up don't need this stiff anymore..
Pm for your email for pictures I can't load them on here..or send number can send them by text..mike

Also have Ron's toilet injection set up everything except the pump ..new injection lines new shut off cable some extra pills Ron's tune book and instructions..500.00

Top
#2358651 - 08/23/17 03:00 PM for sale [Re: Scully]
mopar_leaner Offline
super stock

Registered: 07/21/04
Posts: 720
Loc: Hermiston Oregon
I have a set of Ross 4.15 stroker pistons with break in time only, approx. 30minutes, they are .030 over
They are part number 99498, flat tops with valve release. The pistons have been balanced but ended up being to much for the combo to run pump gas. New they where $690 now asking $375 shipped in the lower 48 Pending!!!


Also have a set of MadDog under chassis headers with torque tubes welded on and come with the flanges that can be welded back on, off my 1971 scamp with a 383 big block asking OBO plus shipping SOLD

A set of front tires for drag racing 165/80-15 asking $100 + shipping

And a BG 280 pump, filter and regulator, plus a 4 port Mallory regulator all used and in unknown condition for $225/ OBO plus shipping

And finally a B and M SFI flex plate part number 10236, for a sb 360 used for $50

Text or email for current pix five 4 one 720 six08 nine


Edited by mopar_leaner (09/26/17 08:01 AM)
_________________________
( it takes a Mopar, to beat a Mopar!
email me at moparleaner@gmail.com )

Top
#2358862 - 08/23/17 10:29 PM Used IMM BB Offset-Intake Roller Lifters [Re: kdsmith07]
BradH Offline
I Live Here

Registered: 01/30/03
Posts: 13218
Loc: Valhalla... eventually
9.9.2017- SOLD
*******************
9.1.2017 - SALE PENDING
*******************
I bought a low-use set of IMM BB roller lifters w/ .180”-offset intake pushrod seats from a fellow Moparts member a few years back, but have never used them.

The original owner (“Wedgie”, but I don’t know if he still posts here or not) said they have a couple hundred street miles and one track day of use, IIRC. The rollers move smoothly and appear to be mechanically sound. They’re also rebuildable, per Brian at IMM.

The price is $275 shipped to the lower 48 US states. I accept USPS money orders and cash. Sorry, no PayPal or international sales. Also, since I cannot guaranty the condition of the parts, this is an “As Is” sale.

Please PM me here, or text 7-zero-3 - 3-one-7 - 7-nine-8-seven... Thanks!


Attachments
Used IMM BBM lifters_offset_int.JPG




Edited by BradH (09/10/17 10:12 PM)
_________________________
Life's too short to waste time on dumb@ss internet pi$$in' contests...

Living by the motto “It’s just easier to keep buying parts than bother with actually putting them together” since 2010… or was it 2000?

Top
#2359944 - 08/25/17 09:11 PM NOS P/N 2863215 18 1/2 inch dia for 1968_69, incl 426 Hemi [Re: 82ramIndy493]
xs29j8 Offline


Registered: 01/19/03
Posts: 3565
Loc: Fort Worth, Texas
NOS P/N 2863215 Fan Assy used in a wide variety of 1968 & 1969 cars, including the 426 Hemi powered B-Bodies.

This fan assembly was purchased from Chrysler before they were discontinued.

Price is $175 plus $17 Shipping within mainland US.

Email me at xs29j8@charter.net or PM me...


Attachments
NOS_2863215_FanAssy_1_IMG_4779.JPG

NOS_2863215_FanAssy_2_IMG_zoom.JPG

NOS_2863215_FanAssy_3_IMG_4793.JPG


_________________________

Top
#2359954 - 08/25/17 09:37 PM Rebuilt Carter AVS Carburetor 4966S for 1971 Mopars [Re: xs29j8]
xs29j8 Offline


Registered: 01/19/03
Posts: 3565
Loc: Fort Worth, Texas
A regular auto rebuilder (Arrow) rebuilt this Carter AVS 4966S used on some 440 powered Mopars built in 1971... includes a thick mounting gasket to reduce heat transfer.

Price is $225 plus $20 Shipping within mainland US.

Email me at xs29j8@charter.net or PM me...


Attachments
IMG_4812.JPG

IMG_4810.JPG

___IMG_4794.JPG

____IMG_4799.JPG


_________________________

Top
#2360054 - 08/26/17 07:42 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
In this picture are 75 valve covers 74 big block and 1 small block, everything that you see is 1966 to 1971 $1200.00 for all (708)288-2879 Scott


Attachments
parts 8-24-17 005.JPG



Top
#2360825 - 08/27/17 07:51 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
JRepucci Offline
master

Registered: 01/20/03
Posts: 2593
Loc: Sacramento,California
Carter Competition Series 625 CFM carb w/electric choke $125


Attachments
DSC01366.JPG

DSC01367.JPG



Top
#2361391 - 08/28/17 08:17 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
kgrandprix1 Offline


Registered: 01/16/15
Posts: 13
Loc: Lagrange, IL, USA
Selling my 1973 Steel forged crankshaft Factory OEM 440 Engine that I purchased 4 plus years ago for a future project that never occurred. This motor is complete minus carb and exhaust manifolds.

The motor has 6 PAC Rods 92051908 and has about 46,000 orig miles when pulled from a RV motor home in running condition, Heads are 3751213.

Stamped numbers:J440T

Casting numbers: 3698830

Motor is very clean inside and ready for your internal inspection.

I can send you pics of this engine upon request.

630-291-4440 thanks. $ 1,500 parts included are MOPAR after market valve covers and 2 water pump housings left and right sides.


Edited by kgrandprix1 (08/31/17 09:36 PM)
Edit Reason: spelling

Top
#2361579 - 08/29/17 07:35 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: kgrandprix1]
plymth70 Offline
member

Registered: 08/28/07
Posts: 24
Loc: MI, Oakland
selling 2 Holley carbs list-3918, date 1937. Good cores.$50.00 for both. Can send pictures.

248-231-0518


Attachments
IMG_0694.JPG



Top
#2361823 - 08/29/17 04:02 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
CFB Offline
member

Registered: 07/29/17
Posts: 3
Loc: Michigan
New K & N Filter for Six Pak. In the box and still sealed in the plastic.

Asking $60.00

Top
#2362172 - 08/30/17 06:36 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
crabman173 Offline
master

Registered: 01/01/06
Posts: 3536
Loc: Big Lick , North Carolina
Nice set of six pack rods resized and ready to use--$85 shipped free RODS SOLD THANKS MOPARTS

new 030 over set of 440 rings $40 shipped free
dusterdave173@gmail Thanks


Attachments
RROODDSS 002.JPG

Description: 4

RROODDSS 003.JPG

Description: 3




Edited by crabman173 (08/30/17 12:47 PM)
_________________________
I have always had a fascination with fast cars at the expense of more normal character development

Top
#2363158 - 08/31/17 10:00 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
MoPar Offline
super stock

Registered: 01/23/03
Posts: 946
Weiand team 'G' aluminum intake manifold for RB engines excellent condition $165.00 delivered in 48 states. 608-739-4489


Attachments
20170829_184646.jpg



Top
#2363178 - 08/31/17 10:32 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: MoPar]
mattsmopars Offline
master

Registered: 03/02/07
Posts: 2515
Loc: tennessee,usa
Mopar performance RB dual plane factory style aluminum intake manifold.
$150.00 plus the shipping cost. I have additional pictures if your interested I can email over to you, just PM me here.
Thanks, Matt


Attachments
IMG_8624.JPG

IMG_8628.JPG

IMG_8627.JPG



Top
#2363179 - 08/31/17 10:40 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: mattsmopars]
mattsmopars Offline
master

Registered: 03/02/07
Posts: 2515
Loc: tennessee,usa
SOLD!
1972-73 BB 400 440 Hp drivers side B body exhaust manifold. The part number is 3751068-1, and it is cast for a 73 car. The date is 8-28-72.
Asking $150.00 plus the shipping cost. I can take what ever pictures someone might need of it. If is a nice manifold just has some flash rust from being wet. Pm me here.
Matt


Attachments
IMG_4189.JPG

IMG_4190.JPG




Edited by mattsmopars (09/10/17 10:10 AM)

Top
#2363485 - 09/01/17 12:14 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Baxter61 Offline
top fuel

Registered: 11/26/04
Posts: 2485
Loc: Oregon City, OR
Hughes Super Prepped CNC Victor style cylinder heads for BB motors. These are Pro-Comp castings with their quality valve replacements then run through Hughes Super Prep program and pushrod clearance to avoid interference issues upon assembly. These were kept at the 440 port size, not Max Wedge and Hughes claims 350 CFM at .650 lift, perfect for a street motor. Still have the Pro-Comp springs as spring selection depends on cam choice.

$2300 shipped in the continental US. HI/AK/International extra shipping.

Located in Gladstone, OR 97027. Email amob64@msn.com or PM me here. PayPal accepted as a gift or add 3%




Top
#2363713 - 09/01/17 06:27 PM Big Block Water Pump Pulley [Re: moparts]
raleye72 Offline
enthusiast

Registered: 05/26/08
Posts: 352
Loc: Wisconsin
For Sale: Very nice straight water pump pulley. It is a glass beaded and painted satin black, ready to install. Price is $25 and shipping. Email or call (608) 485-3473


Attachments
DSC01624.JPG

DSC01623.JPG



Top
#2363715 - 09/01/17 06:32 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
raleye72 Offline
enthusiast

Registered: 05/26/08
Posts: 352
Loc: Wisconsin
For Sale: Big Block Crank Pulley. It is in excellent shape an has been glass beaded. Price is $45 and shipping . Email or call (608) 485-3473


Attachments
DSC01627.JPG

DSC01628.JPG



Top
#2363927 - 09/02/17 06:42 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
tommie Offline
member

Registered: 01/18/13
Posts: 36
Loc: ny
1969 440 4spd dual point prestolite Distributor
2875772
Ibs-4014b 52 8

Nice shape not all worn out. I would get a new wire and points for it. $500 to your US door. Outside the US is more ,just contact me on shipping charges..send me a PM or email tommie69@optonline.net


Attachments
025.jpg

026.jpg

027.jpg



Top
#2363994 - 09/02/17 10:02 AM Re: 383-413-426-440+6 NORS DUAL POINT TAN CAP NOS ROTOR,POIN [Re: tommie]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
MADE IN THE USA 361-383-413-426W-426H-440+6 NOS&NORS PRESTOLITE/AUTOLITE TUNE UP KIT
NORS BRASS INSERT TAN,RIBBED,CARBON BRUSH,HD, dual point cap
NOS IBK-1016 ROTOR WITH# ON TOP
NOS IBB-2042S PRESTOLITE COND
2 NOS PRESTOLITE (W/LOGO) DUAL POINTS

ONLY HAVE BOX FOR CAP, SMALL PARTS WERE SKIN PACKED $60
cowgerwilliam035@gmail.com


Attachments
dualpoint 001.JPG

dualpoint 002.JPG

DUALPOINT 003.JPG

DUALPOINT 005.JPG



Top
#2364276 - 09/02/17 08:37 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
MODODMO Offline
member

Registered: 08/11/07
Posts: 60
Loc: pittsfield,ma. 01201 usa
Rebuilt condition,this is a mild race engine,this is a short block,NO heads 1976 440 block bored 030,hot tanked,magnafluxed no cracks,new cam bearings,8 new trw speed pro rings & pistons approx. 11.50 to 1 comp.,reconditioned stock LY rods,steel crank,turned 020 on the rods and 030 on the mains, balanced assembly.New Hyd.comp cams cam & lifters & new push rods, .564 lift & dual pattern on the duration .295 on int. & .307 on exh. new double roller timing set,new hv oil pump,new 7 quart deep oil pan & pickup tube,a stock water pump housing,Mallory unilite electronic distributor $3000.00 or make an offer. https://images.craigslist.org/00u0u_22y6o9FNQxb_600x450.jpg https://images.craigslist.org/00p0p_bzARLctzOlu_600x450.jpg https://images.craigslist.org/00X0X_aPBiyfK1EHf_600x450.jpg


Edited by MODODMO (09/02/17 08:47 PM)

Top
#2364286 - 09/02/17 08:54 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
MODODMO Offline
member

Registered: 08/11/07
Posts: 60
Loc: pittsfield,ma. 01201 usa
Mopar 1975 400 block w/main caps, std bore, may need to be bored oversize $400.00 https://images.craigslist.org/00h0h_aCQrLwwtnMN_600x450.jpg

Top
#2364287 - 09/02/17 08:56 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
MODODMO Offline
member

Registered: 08/11/07
Posts: 60
Loc: pittsfield,ma. 01201 usa
Mopar 727 stall converter from big end performance 3000 stall new $275.00 https://images.craigslist.org/00l0l_r931o3PFe7_600x450.jpg

Top
#2365223 - 09/04/17 01:12 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
dart4forte Offline
I Live Here

Registered: 01/31/03
Posts: 13698
Loc: Mesa, Arizona
Nostalgic Accell Duel point distributor, fits B motors, 361, 383, 400. Shaft has nor lateral free play and turns freely, just needs some cleaning.


$25 plus $13.95 shipping

Mesa, AZ


Attachments
20170904_095928_resized[294].jpg

20170904_095948_resized.jpg



Top
#2366163 - 09/05/17 10:25 PM Edelbrock Performer 440 4BBL Intake manifold [Re: crabman173]
streetkit Offline
pro stock

Registered: 01/22/03
Posts: 1419
Loc: Northern CA
Edelbrock Performer 440 4BBL Intake manifold. Used but in good shape. Needs some cleaning. Good outer holes but has one bad inner hole. Not a probelm if running a Holley, Edelbrock, or Carter AFB. Will need to Heli-coil the one inner hole if you are going to run a Thermoquad.

$135 shipped to your door anywhere in the lower 48 states.

Located in Northern CA

glolas@comcast.net
_________________________
1973 Dodge D100

Top
#2366307 - 09/06/17 09:47 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
RapidRobert Offline
Circle Track

Registered: 11/20/03
Posts: 32540
Loc: Lincoln Nebraska
440 iron intake. good shape. 7-27-68 2806178 $89 + the ride. Paypal + the fee preferred


Attachments
SAM_0805.JPG


_________________________
live every 24 hour block of time like it's your last day on earth

Top
#2366649 - 09/06/17 08:00 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: DudleyPerformanc]
jcastle1 Offline
super stock

Registered: 04/03/03
Posts: 894
Loc: Cincinnati,Ohio
Edelbrock 383/400 6 pack intake. has been polished and portmatched.
$300 plus shipping

Top
#2366767 - 09/06/17 11:31 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
82ramIndy493 Offline
pro stock

Registered: 02/09/03
Posts: 1528
Loc: crisfield, maryland 21817
I have for sale a Carter carb # 9636 which I believe is a replacement carb for the 340 and 383 engines. I am sure with some fine tuning you could use this carb on a variety of engines. The carb is one I purchase a while back for a project in mind but that project has gone to a new home so the carb is no longer needed. I have removed the top from the carb so you can see that it is very clean and that all linkages and the throttle shaft all work fine. The air fuel screws also work fine. It is a very nice carb and the pictures should tell it all. Asking price is 130.00 dollars shipped within the 48 states. PM me here or message me at "samson1156@verizon.net" for any questions or purchase info. Thanks and have a great day.


Attachments
DSC04874.JPG

DSC04875.JPG

DSC04877.JPG

DSC04876.JPG




Edited by 82ramIndy493 (09/06/17 11:33 PM)

Top
#2367200 - 09/07/17 08:02 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: 82ramIndy493]
NTOLERANCE Online   content
master

Registered: 08/17/03
Posts: 4082
Loc: Madison Wi
I have an intake for sale

part# 2206000 this intake is single four barrel that fits
1962 413 b c and d body
1963 413 c d body exc.300-j
1964 413 c d body
1964 street wedge
1965 c d body
1965 street wedge b c body
needs to be blasted no stripped out holes or damage

will trade for any other big block wearable items such as gaskets seals or other items


Attachments
IMG_4107.JPG


_________________________
This post has been edited from its original form
Reason: Way too friggen drunk.

I was Mopar when Mopar wasnt cool and life was just a bet on a race between the lights.


Top
#2367541 - 09/08/17 03:20 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
PSRacing1 Offline
member

Registered: 02/08/10
Posts: 182
Loc: livonia mi.
383 4bbl. with 727 trans removed from a 1966 Charger show car . Engine & trans were restored and detailed for Auto Rama in Detroit . mileage on both are 300 to 400 miles / The only reason the original owner changed the eng. & trans is he wanted a HEMI W/4-SPD./ .PRICE REDUCED TO $2700. FOR FAST SALE. psroadster@aol.com FOR Additional pics E-mail me CALL 248 463 0481 ask for Patrick . Thank you MOPARTS FOR HELPING ME SELLING THIS PIECE OF ART .


Attachments
CAM00122.jpg

20160715_185138_resized.jpg




Edited by PSRacing1 (09/30/17 02:05 PM)

Top
#2368298 - 09/10/17 11:42 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
crabman173 Offline
master

Registered: 01/01/06
Posts: 3536
Loc: Big Lick , North Carolina
PULLEY
TWO GROOVE LOWER FOR ALL BIG BLOCKS WITH POWER STEERING--NICE ORIGINAL $28 SHIPPED FREE dusterdave1732gmail.com


Attachments
289 build and ADDDD 020.JPG

Description: 2


_________________________
I have always had a fascination with fast cars at the expense of more normal character development

Top
#2368663 - 09/11/17 03:44 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Mopar Guy Offline
enthusiast

Registered: 10/07/06
Posts: 358
Loc: Sweden
NOS realy rare DC six pack carbs listnumber 82-83 unmolested never had fuel in them as good as it gets for $2500. mr440mopar@hotmail.com


Attachments
DCCarbs.jpg




Edited by Mopar Guy (09/11/17 03:50 AM)

Top
#2368945 - 09/11/17 04:18 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
rod440 Offline
member

Registered: 11/25/10
Posts: 40
Loc: Neenah,Wi


Attachments
DSCN1908.JPG

DSCN1910.JPG



Top
#2371300 - 09/15/17 03:00 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
HT413 Offline
member

Registered: 10/27/12
Posts: 22
Loc: Bridgewater, NJ
Parting out my 413. Engine ran strong right till I pulled it a year ago.

AEM WIDEBAND O2 gauge - new in box $$$ SOLD $$$$

RB forged crank std/std out of my running 413. Some of the journals will need some cleanup but it's in real good shape $75. Has a nice ring when struck on all counterweights.

Full set of LY rods nice shape $$$SOLD$$$

Distributor driveshaft / gear nice shape no wear $15

65-66 B / RB water pump housing casting # 2468807 drivers side inlet correct for all B, RB, HEMI motors including 426 max wedge cleaned and primed $30

Factory water pump 8 vane casting #3671083 1972/73 and fits all B/RB factory housings. Cleaned and painted $10

RB valley pan rails cleaned and painted $25

1972 413 block and caps std bore nice shape. $100

Oem starter works great $10

GM style alternator - works $15

Prices plus the ride. All prices OBO.

Thanks MOPARTS!


Edited by HT413 (09/21/17 09:06 AM)

Top
#2371545 - 09/15/17 10:50 PM 440 413 426 Tunnel Ram with two 660 center squirters carbs [Re: HT413]
davesmopars Offline
master

Registered: 08/01/04
Posts: 2713
Loc: cheshire, ct
440 413 426 Tunnel Ram with two 660 center squirters carbs, fuel lines, old style linkage and air cleaners
everything in great shape carbs are set up for tunnel ram not carbs thrown on the intake
****SOLD****


Attachments
fullsizeoutput_1ae9.jpeg

fullsizeoutput_1aea.jpeg




Edited by davesmopars (09/19/17 07:17 AM)

Top
#2372256 - 09/17/17 01:49 PM Re: 440 413 426 Tunnel Ram with two 660 center squirters carbs [Re: davesmopars]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
5 pair of big block dual points
1 set nos mopar
4 sets nors delco remy
all made in the usa $50 mailed
cowgerwilliam035@gmail.com


Attachments
delcopoints 001.JPG

delcopoints 005.JPG

delcopoints 004.JPG



Top
#2372674 - 09/18/17 10:59 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
crabman173 Offline
master

Registered: 01/01/06
Posts: 3536
Loc: Big Lick , North Carolina
1968 440 Crate
Fresh built, done right, mild hyd cam, new Rick Ehrenburg distributor-Perf RPM--new Hemi pan etc great little street unit ready to go--all new valves, guides etc, Wiseco forged flat tops
easy 420 HP drive anywhere cheapo shipping available $5100
call 704 244 6649 Thanks or dusterdave173@gmail.com


Attachments
440JULY$$$$ 010.JPG

Description: 4


_________________________
I have always had a fascination with fast cars at the expense of more normal character development

Top
#2373330 - 09/19/17 12:58 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
GTX MATT Offline
master

Registered: 06/05/06
Posts: 4726
Loc: CT
Holley 770 Street Avenger, electric choke, good working condition removed a few months back - $200 plus shipping
_________________________
Now I need to pin those needles, got to feel that heat Hear my motor screamin while I'm tearin up the street

Top
#2373484 - 09/19/17 05:13 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: GTX MATT]
70sixpkRT Offline


Registered: 01/20/03
Posts: 3041
Loc: South San Francisco, Ca
I have a set of manual carbs for an A12. Front: Date code 1229 part# 4393. Center: Date code 1229 part# 4391 for manual. Rear: Date code 0929 part# 4394. I also have a brand new Edelbrock manifold part #2475. All 3 carbs are untouched and in good condition. Manifold is brand new.
$2200 plus shipping or the carbs only for $1800 + 3% Paypal.


Attachments
4393.jpg

4391.jpg

4394.jpg

manifold.jpg


_________________________

4-speed
3:54 Dana
13.01 @107.93 with street tires (not hooking up)

Top
#2373486 - 09/19/17 05:14 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: 70sixpkRT]
70sixpkRT Offline


Registered: 01/20/03
Posts: 3041
Loc: South San Francisco, Ca
Carb set


Attachments
carbset.jpg


_________________________

4-speed
3:54 Dana
13.01 @107.93 with street tires (not hooking up)

Top
#2373566 - 09/19/17 07:39 PM Re: B/E body big block engine mount brackets and mounts [Re: moparts]
PHYSIXX Offline
pro stock

Registered: 04/07/04
Posts: 1514
Loc: Edison, New Jersey
I have for sale a pair of B and E-body big block engine mount brackets. They both look to be in great shape with nothing bent or cracked. Also included are the rubber insulator mounts that look great also. I would like to get $45 for everything plus the shipping.

Edison, NJ
rider1454 at aol.com


Attachments
DSCN4185.JPG

DSCN4188.JPG



Top
#2375460 - 09/23/17 11:57 AM Re: B/E body big block engine mount brackets and mounts [Re: PHYSIXX]
69 charger man Offline
enthusiast

Registered: 11/10/06
Posts: 349
Loc: NJ
Bb water pump housings. 10$ each plus shipping. Maybe be able to fit them in the usps large flat rate box. Please pm me thanks for the add


Attachments
D32B058E-4E6C-478C-AA43-819AB7A3AFAD.jpeg




Edited by 69 charger man (09/23/17 11:59 AM)

Top
#2375832 - 09/24/17 07:09 AM 72 400 4 barrel intake [Re: PHYSIXX]
FC7 cuda Offline
super stock

Registered: 07/22/07
Posts: 785
Loc: nj
400 intake manifold been glass beaded $40


Attachments
20170311_122811.jpg



Top
#2376303 - 09/25/17 09:06 AM Mopar Engines for sale - 3rd quarter [Re: FC7 cuda]
docr Offline
super stock

Registered: 08/24/06
Posts: 751
Loc: Indiana USA
For Sale:

1 Pair (R & L) - 1967 Dodge Coronet RT or Plymouth GTX
Chrome OEM 440 HP Valve Covers. They have all the wire/hose fittings
and baffles, and are in very good shape for 50 years old. No damage and little rust.
Need good hand cleaning and polishing.

Note: These are rare “one year only” - Difficult to find.

$190.00, includes shipping from lower 48 states.

E-mail only at sacdrose@att.net

***** THANKS MOPARTS.COM *****

Top
#2376314 - 09/25/17 09:11 AM Re: Mopar Engines for sale - 3rd quarter [Re: docr]
docr Offline
super stock

Registered: 08/24/06
Posts: 751
Loc: Indiana USA
For Sale:

OEM “One Year Only” – 1967 440 HP Dodge Coronet R/T, Plymouth GTX or Charger - Dual Snorkel Air Cleaner (top/base)

4-1/4” hole diameter in base (for original AFB Carburetor), 3-1/2” OA height.
(Difficult to find with this base) **** Excellent condition ****

$425.00 plus shipping

E-mail only at sacdrose@att.net

Located in the 46530 (Northern Indiana) zip code

***** THANKS TO MOPARTS.COM *******

Top
Page 1 of 8 1 2 3 4 5 6 7 8 >

Advertisement
Sponsored Link
Forum Stats
24,901 Registered Members
32 Forums
184,323 Topics
2,135,679 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
What Rim is this??
by EV2 340
10/22/17 04:15 PM
Small block connecting rods
by 10sec.dart
10/22/17 03:53 PM
Auto Daylight Headlights 2005 LESABRE
by Rug_Trucker
10/22/17 03:15 PM
Question on tractors and larger lawn equipment
by Dixie
10/22/17 02:26 PM