Page 1 of 8 1 2 3 4 5 6 7 8 >
Topic Options
#2329615 - 07/01/17 09:30 AM For Sale - Big Block Engine - 3rd Quarter
moparts Offline

Registered: 01/19/03
Posts: 13760
Loc: Norwich CT USA

#2329724 - 07/01/17 12:18 PM Isky Adjustable Iron Rocker Arms, Shafts & Hardware - Used [Re: moparts]
Rocket Offline

Registered: 02/25/06
Posts: 428
Loc: CT
This is a very nice set of Isky adjustable big block Mopar rocker arms, shafts, spacers and mounting hardware. These were run for a summer and are in great condition with very little wear. The shafts have sonce been cleaned including using a bottle brush on the insides, polishing the outside and installing new shaft end plugs. Rockers and hardware were degreased and inspected. Rockers and shafts show no galling. These are ready to install. Bolts and shaft hold downs are included but not pictured.

Price is $400 shipped in the lower 48 states. . I will ship internationally for the additional shipping cost.

Email me at for more information or pictures.



Edited by Rocket (07/01/17 12:19 PM)

#2329768 - 07/01/17 01:33 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
mr_340 Offline

Registered: 01/20/03
Posts: 3272
Loc: DFW

Edited by mr_340 (08/19/17 12:16 AM)
Floyd Lippencott IV

#2329821 - 07/01/17 03:01 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
Suregrip391 Offline
top fuel

Registered: 09/27/05
Posts: 1705
Loc: USA
1967 C440 HP Engine. Many extras included aside from the engine, It's apart for your inspection. (This is mostly complete less the 915 heads and con rods). From air cleaner and carb to oil pan & manifolds. I Can provide additional date codes or casting numbers and part numbers to those SERIOUSLY interested. Originally from a 67 GTX but perfect for a 67 Coronet RT too. The Block was cast on 10-7-66 and has an assembly date of 2-2-67. Many extra parts included for the price of $3600 such as a wood steering wheel ( not recall) , 67 alternator, 67 radiator, wiring, interior pieces, more... prefer to sell in one lot to one buyer. Serious only please, Pickup preferred, Located in NY. Thanks Moparts. Not a fire sale either. Pics to come or PM me please.

#2329873 - 07/01/17 05:23 PM NOS Holley MECHANICAL Center, 6 Pack, 6bbl. Carburetor #4782 [Re: moparts]
hemi71x Offline

Registered: 01/20/03
Posts: 4790
Loc: Rancho Cordova, California (Sa...
I have an NOS, new in the box, Holley center, 6 Pack, 6 BBL, Mechanical carburetor, #4782 up for sale.
These carburetors were the competition, performance, race, carbs over the production street versions.
Rated at 500 CFM.
The fuel inlet is on the Left side of the float bowl, not like the production 340, 440, street versions.
The outboard carburetors did not have vacuum pods on them, hence the term mechanical carburetors.
Holley hasn't produced these in years, so they are very difficult to find, in this day and age.
$600.00 + Pay Pal, and FEDEX'ing with insurance, and signature delivery charges on the package.
That's the price.
Not interested in any "trades" low ball "offers" for this part.
Interested, serious buyers, send me a pm thru this forum.
Jim V.

Holley Mechanical Carb 001 (Small).JPG

Holley Mechanical Carb 002 (Small).JPG

Holley Mechanical Carb 004 (Small).JPG

Holley Mechanical Carb 005 (Small).JPG


RF-4C Phantom 69-370 Zweibrucken, Germany

#2329880 - 07/01/17 05:37 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
6PAX Offline

Registered: 01/20/03
Posts: 4433
Loc: Metro Detroit
Cal Custom El Toro air cleaner wing nut. $5

Used Crane cam #278-2. Cam only, no lifters. $75

Used chrome thermostat housing. $5

Four new extra wide chrome valve cover hold down clamps. $10 for the set

New exhaust manifold heat stove to air cleaner hose. $20

Cal Custom 14" aluminum air cleaner with filter. $100

1970 Big block single nipple oil breather with hose. $35

New 12" oval 4 barrel aluminum air cleaner with filter. It measures 12" L x 8 1/4" W x 3" H and has a 5 1/8" carb opening. $60

Cal Custom 9" finned air cleaner top and base. No filter. $75

Mr. Gasket 1" thick carb spacer. $15

137 Spectre brand radiator and heater hose clamp covers. Some chrome, some red and some blue anodized. Various sizes. $50 for the lot.

1972 400 parts. Oil pump $5, various AC brackets $50 for the lot, spark plug shields $15 pair, exhaust manifold heat stove for non-hp manifolds (needs a little straightening) $15. $50 for everything.

Carb. throttle linkage pin. $10

Pair of big block exhaust manifolds. Part numbers 3830800 & 3830820. $80

Pair of big block exhaust manifolds. Part numbers 2532626 & 2532464. $100

Pair of big block heads. Part number 2406516. $100

Prices do not include shipping. gt340 at

Edited by 6PAX (08/01/17 10:58 PM)

#2330025 - 07/01/17 11:02 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: 6PAX]
markz528 Offline

Registered: 01/20/03
Posts: 3198
Loc: Milford, OH
Used set of 8 KB Silvolite 1271 pistons, pins and locks for a 383. Standard bore size.

Summit 1271 Pistons

I removed these pistons from a stock 383. They do not have a lot of time on them and are in very nice shape. I can send more pics if requested.

$50 plus actual shipping. Please contact me via PM on this site.




67 Coronet 500 9.610 @ 139.20 mph
67 Coronet 500 (street car) 13.300 @ 101.75 mph
69 GTX (clone) - build in progress......

#2330045 - 07/01/17 11:30 PM 440/512 Short Block f/s [Re: 6PAX]
Dragula Offline

Registered: 05/02/04
Posts: 9982
Loc: Taxes R-US, NY
Sorry, looks like I might need this.

This is a 440 Source 440/512 engine with girdle and all good parts. It is a pump gas engine when used with Indy EZ1 heads. Comes in at 10.8:1...No cam or lifters as I borrowed that for my other engine, but cam bearings are like new. No oil pump presently, but a brand new Melling one can be installed for full asking price with my used Milidon cover and the 9 quart oil pan and line,

Freshened 2 seasons ago and only 11 passes on it this season. when it was pulled. Best Et was 9.70 at 138.5mph.

Can be freshened again at new owners expense. Hone still looks real good. Well taken car of.

Available items that can go with it for a little extra....

Port matched Indy 4500 intake
Port matched Indy 4150 intake
Milodon Oil pan and oiling system
Indy valley pan
MSD distributor
Quick Fuel Annular 950 carb

Could also be built with your your choice of cam at your cost...


Edited by Dragula (07/30/17 01:43 PM)
'71 Duster Pump Gas 512RB (6.19) (9.70 at 138.5mph)

'70 Cuda NO Hemi, again (6.31) (9.9)

#2330128 - 07/02/17 09:22 AM 1971+ Stock Big Block Heads [Re: moparts]
vinnyd76 Offline
super stock

Registered: 04/25/12
Posts: 757
Loc: Macomb, MI
For sale is a set of 383/400/440 stock heads with a casting number of 3462346. These heads are correct for a 1971 - 1973 Mopar. Please PM for additional info, pics, etc...

Price: $100 obo

Location: Metro Detroit

I can deliver to Carlisle.

#2330524 - 07/03/17 01:40 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
dart4forte Offline
I Live Here

Registered: 01/31/03
Posts: 13687
Loc: Mesa, Arizona
Offenhouser duel 4 intake manifold, good shape. Comes with carb adapters

$250 plus shipping

Mesa, AZ


#2330714 - 07/03/17 01:12 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
JSoph Offline

Registered: 06/28/11
Posts: 3
Loc: Kokomo Indiana
1978 400 bare block, $300. Block is standard bore. Bought to build as a stroker but have decided to go a different direction. Block is located in central Indiana and prefer local pickup. Call or text 765-437-5871




#2330892 - 07/03/17 04:55 PM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]

Registered: 01/20/03
Posts: 659
Loc: danville, IN USA
I will be bringing to Carslisle the following air cleaners 440-6 with front block off original not repo $600.00, 440-4 oval air cleaner original real not repo $600.00, 68-69 round 383 air cleaner $200.00.

If interested please call or text 1-317-709-3625

#2331028 - 07/03/17 07:44 PM 9/71 Casting date 440 Standard Bore Bare block with caps [Re: moparts]
70gtx440dana Offline

Registered: 12/27/03
Posts: 2657
Loc: Lansing, MI
I have a 9/71 cast 440 standard bore block. I just had it cleaned and magnafluxed at my local machine shop. Block checks out excellent with all bores showing standard size of approximately 4.32" at the top with very little noticeable wear. I am certain this block will clean up at .030" oversize. Top ID pad has had an area machined away. Will not affect function. I just spent $150+ on clean and magnaflux. $495/BO + shipping from 48837. I may be able to help with delivery to the Mopar Nats in August. Joe 517-243-7115 or

IMG_5608 (1024x768).jpg

Edited by 70gtx440dana (07/03/17 07:44 PM)
70 Road Runner 383-4 4 speed FJ5 & black guts 70 Charger R/T 440-4 4 speed FJ5 & white guts

#2331037 - 07/03/17 08:11 PM 413 Standard Bore Truck Bare block with caps [Re: 70gtx440dana]
64MAX Offline

Registered: 01/21/03
Posts: 144
413 truck/motor home block with caps, casting number 2658836, 8-11-69 date; FT 413 & 10 24 on pad; under-bored 426/440 block with thick cylinder walls and external strengthening ribs, sonic numbers available, $500; RB forged crankshaft from this motor, std., $125 Local pick up in Western MA. Possible delivery to Carlisle Best to email me at Thanks for the ad Moparts!

#2331310 - 07/04/17 10:39 AM Re: 413 Standard Bore Truck Bare block with caps [Re: moparts]
mopars4life Offline
super stock

Registered: 08/08/04
Posts: 711
Loc: Virginia
Comp Cams High Energy Timing Set - Big Block - New in the Box
I have a new high energy timing set- solid but single link. Retails for 45 but will sell for $35. Will be at Carlisle if want to save shipping.
Link to album with pics:

Summit Racings ad:

#2331402 - 07/04/17 01:01 PM Valve Springs [Re: mopars4life]
cb1289 Offline

Registered: 09/01/07
Posts: 108
Loc: NJ
Brand new Edelbrock #5792 dual valve springs and #9644 retainers.
Specs from Edelbrock: 140 lbs seat, 1.88" inst.height, 317 lbs open press. @ .500" lift, od 1.550", id 1.120", coil bind 1.160"
Perfect springs for up to .600" lift flat tappet cams.

SOLD Thanks Moparts

Edited by cb1289 (07/18/17 10:12 AM)
62 Dodge Dart Wagon 65 Plymouth Satellite

#2331694 - 07/04/17 10:41 PM Re: Valve Springs [Re: cb1289]
Azzkikrcuda Offline
pro stock

Registered: 01/20/03
Posts: 1587
Loc: North Dakota
Used Smith Brothers 5/16 diameter .083 wall pushrods, ball and ball ends 9.390 length. Pushrods look new, was setup for 440 solid cam and Comp Pro Magnum rockers. Were $170 new, $100+shipping

PM me here if interested.

pushrods 001.JPG

Edited by Azzkikrcuda (07/27/17 08:41 PM)
The only Carbs I care about are under the hood!

#2331773 - 07/05/17 05:55 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
mosweethemi Offline

Registered: 12/31/07
Posts: 618
Loc: VA.
For sale a 1970 440 six pack set up NOS center carb with New out board carbs all new acc , NOS air cleaner . Complete set up ready to bolt on your 440 engine $2500.00 ,Also NOS PCV Valves and more .Will have them at Carlisle next week ,July 14-15-16-17 I,am row I72-I78 I have tons more Mopar parts for sale .

#2331822 - 07/05/17 09:45 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: moparts]
gtxblu Offline
top fuel

Registered: 06/21/04
Posts: 1737
for sale a complete 1977 casting 440 engine minus 1 exhaust manifold, valve covers, and water pump housing. $400.00. 1-734-775-0738. located south of Detroit.



#2332368 - 07/06/17 08:00 AM Re: For Sale - Big Block Engine - 3rd Quarter [Re: gtxblu]
MI Mopar Works Offline

Registered: 12/24/15
Posts: 415
Loc: MI
1969 model standard bore 440 HP2 block with main caps. This block has been cleaned and magged, came back good. Block has a slight ridge at the top of all 8 bores that will clean up easily at .030 over. Stock deck height, all bolt holes and threads clean, no surprises. Also has ARP main studs loosely installed that are included. The casting date is 11/6/68, assembly date is 1/9/69, VIN is from a 69 Charger R/T VIN#XS29L9B266440. This is a hard to find block in excellent condition. Delivery to Carlisle or the Nats possible. Asking $600 OBO. Call Dave (734)624-2212 or pm me here.



Edited by MI Mopar Works (07/26/17 03:26 PM)
MI Mopar Works
Parts Sales
Restoration and detailing of all kinds of mopar hardware

Page 1 of 8 1 2 3 4 5 6 7 8 >

Sponsored Link
Forum Stats
24,900 Registered Members
32 Forums
184,278 Topics
2,135,010 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
RIP Gord
by ChryCoGuy
Today at 02:16 AM
Thanks to Mopar Muscle and Moparts.
by 383man
Today at 01:33 AM
340 Re-Rebuild or take my chances
by hyefatman
Today at 12:04 AM
Carburetor spacers for heat
by RAY1969CARS
Yesterday at 10:35 PM