Page 1 of 2 1 2 >
Topic Options
#2329614 - 07/01/17 09:30 AM Wanted - Big Block Engine - 3rd Quarter
moparts Offline


Registered: 01/19/03
Posts: 13761
Loc: Norwich CT USA
up

Top
#2330988 - 07/03/17 06:20 PM Re: Wanted - Fred Brewer rocker arms and valve covers [Re: moparts]
birdtracker Offline
mopar

Registered: 06/20/04
Posts: 415
Looking for Fred Brewer rocker arms , shafts and valve covers. pm here. Thanks Birdtracker

Top
#2333843 - 07/08/17 08:28 PM Re: Wanted - Fred Brewer rocker arms and valve covers [Re: moparts]
moparhotrods Offline
member

Registered: 12/01/09
Posts: 121
Loc: New Castle,DELAWARE
wanted
a new Mopar performance 528 lift solid Cam and lifters for a big block if you have one sitting around and want to sell it please PM me here on the board and include a phone number thank you

Top
#2334426 - 07/09/17 10:10 PM Re: Wanted - Big Block Engine - 3rd Quarter [Re: dynamite]
beaver77 Offline
member

Registered: 09/02/09
Posts: 48
Loc: Iowa
Looking for an old nos set of trw flat top or dome pistons for 383. Standard bore or 30 over.
Joshtoland66@hotmail.com

Top
#2342246 - 07/23/17 11:10 PM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
DGS Offline
mopar

Registered: 07/08/05
Posts: 453
Loc: Graz, Austria
Looking for an Indy 440-2d dual plane intake manifold for standard port heads. PM me here.
Thanks


Edited by DGS (07/23/17 11:11 PM)

Top
#2342261 - 07/23/17 11:39 PM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
Wicked49670dart Offline
mopar

Registered: 12/27/08
Posts: 697
Loc: Oak Harbor, WA
Looking for a 383 or 400, located north of Seattle WA. Looking for something I can pick-up! Thanks Matt


PM me here please.
_________________________
70 Dart 3400 496 New Best 6.15@110.37 660ft, 9.76@135 with a 1.34 60ft

Top
#2342442 - 07/24/17 12:50 PM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
nssracer1 Offline
enthusiast

Registered: 05/29/08
Posts: 200
Loc: Indiana
Wanted: CH4B Edelbrock Intake for a RB motor. Doug@evansvillekia.com

Top
#2343034 - 07/25/17 11:32 AM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
moparhotrods Offline
member

Registered: 12/01/09
Posts: 121
Loc: New Castle,DELAWARE
wanted
looking for a good set of 40 over forged flat top or Dome Pistons for a 383 please PM me here on the board and include a phone number thank you

Top
#2346116 - 07/31/17 08:44 AM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
HR3128 Offline
enthusiast

Registered: 06/10/06
Posts: 298
Loc: Michigan
Wanted: 4.15 stroke crankshaft
let me know what you have.
roy.holcomb@att.net


Edited by HR3128 (08/25/17 09:19 PM)

Top
#2346140 - 07/31/17 09:43 AM 1970 383/440 Water pump housings [Re: HR3128]
Erik Offline


Registered: 01/20/03
Posts: 3220
Loc: Stroudsburg, PA
Thanks! Got what I need.


Edited by Erik (08/01/17 08:48 PM)
_________________________
1970 Challenger R/T SE 383 Auto
1968 Barracuda Convertible - 416 4-spd

Contrary to the opinions of some, I am not dumber than I look.

Top
#2346624 - 08/01/17 09:59 AM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
jeff57 Offline
enthusiast

Registered: 11/19/04
Posts: 357
Loc: East Central Illinois
found it! thanks moparts, jeff57


Edited by jeff57 (09/20/17 10:04 AM)

Top
#2347588 - 08/02/17 09:32 PM Distributor Wanted for 70 440/727/4-Barrel - 3438222 [Re: moparts]
vinnyd76 Offline
super stock

Registered: 04/25/12
Posts: 758
Loc: Macomb, MI
I'm looking for a distributor that is correct for a 70 Dodge 440/727/4-Barrel. The part number is 3438222.

Please PM me if you have one available for sale.

Top
#2348908 - 08/05/17 10:31 AM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
Palm176 Offline
member

Registered: 08/05/17
Posts: 4
Loc: PA
Looking for one or a set of 383 standard bore pistons. TRW part number L2293. Thanks in advance.

Top
#2352545 - 08/11/17 05:05 PM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
willard Offline
member

Registered: 01/18/09
Posts: 89
Loc: Poland
361/383/400 stock stroke, stock rod journals, max 0.030 undercut main journals crank is needed! Also a stock rear main seal retainer (not cracked).

Top
#2362581 - 08/30/17 08:53 PM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
KOS Offline
pro stock

Registered: 08/17/03
Posts: 1355
straight plug performance heads....440source or anything similar pm with info.

Top
#2362941 - 08/31/17 03:00 PM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
nssracer1 Offline
enthusiast

Registered: 05/29/08
Posts: 200
Loc: Indiana
Need a single 4 barrel intake manifold, think it goes on a 69-70 Mopar part # 2951736.....doug@evansvillekia.com. Thanks, Doug Duell

Top
#2363231 - 09/01/17 12:28 AM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
NTOLERANCE Offline
master

Registered: 08/17/03
Posts: 4082
Loc: Madison Wi
Looking for one gold moroso big block valve cover

Just like the one pictured.


Attachments
IMG_4030.JPG


_________________________
This post has been edited from its original form
Reason: Way too friggen drunk.

I was Mopar when Mopar wasnt cool and life was just a bet on a race between the lights.


Top
#2363820 - 09/01/17 10:15 PM 1970 and 1971 440 hp engines needed [Re: NTOLERANCE]
ogopogo Offline
pro stock

Registered: 10/14/03
Posts: 1566
Loc: BC Canada
Looking for a 1971 440 hp engine,MUST be a G440 HP,and also could use a 1970 440 HP F440 engine,anything from a bare block to fully built stroker motor

ogopogo69 at shaw.ca

Top
#2366094 - 09/05/17 08:43 PM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
marcjames Offline
member

Registered: 08/11/15
Posts: 79
Loc: ny
looking for parts for my 1967 440 hp motor anything to everything all I have is a block crank and rods need everything else thanks mark

Top
#2366315 - 09/06/17 09:58 AM Re: Wanted - Big Block Engine - 3rd Quarter [Re: moparts]
CoDart Offline
enthusiast

Registered: 10/06/11
Posts: 271
Loc: Fort Collins, Colorado
Looking for high compression 383 pistons, something in the 12-13:1 range, Thanks!

Top
Page 1 of 2 1 2 >

Advertisement
Sponsored Link
Forum Stats
24,903 Registered Members
32 Forums
184,386 Topics
2,136,467 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Advise on setting cedar posts
by StrokerPost
10/24/17 01:21 AM
Ok, so who all is going to Fall Fling??
by dart4forte
10/24/17 12:33 AM
Dome light glows when map light is off
by 3XBlack6packGTX
10/24/17 12:32 AM
Converting rims to bead locks, who does that?
by Cab_Burge
10/24/17 12:14 AM