Page 1 of 5 1 2 3 4 5 >
Topic Options
#2329611 - 07/01/17 09:29 AM For Sale - Small Block Engine - 3rd Quarter
moparts Offline


Registered: 01/19/03
Posts: 13760
Loc: Norwich CT USA
up

Top
#2329658 - 07/01/17 10:23 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2667
Loc: Kansas Roads Between 0 and 140...
Mopar performance 284/484 hydro cam/lifter kit $175

Also the mopar 508/292 kit. Pics of that. SOLD! THANKS MOPARTS!


PM me here. Thanks!


Attachments
DSC00031.JPG

DSC00032.JPG

DSC00036.JPG



Top
#2329684 - 07/01/17 11:14 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
Chris2581 Offline


Registered: 01/19/03
Posts: 6514
Loc: Jacksonville, FL
Mr. Norm's Tri Power air cleaner assy. Needs refinishing. Is correct for the GSS Demon cars. $400.00

Pics available. PM me here.
_________________________
Nautilus Racing-
We use Superformance gaskets and Turbo Action converters/products.

Top
#2329838 - 07/01/17 03:42 PM R3 Arrow Timing Chain Cover for R Series Race Blocks [Re: Chris2581]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
This is a new Arrow aluminum timing chain cover for Mopar R series racing blocks with 9.0" to 9.2" deck heights. It has a new crankshaft seal pressed in.

Price is $275 shipped in the lower 48 states. I will ship internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com for more information or pictures.


Attachments
P1040695.JPG

P1040700.JPG



Top
#2329862 - 07/01/17 04:54 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
Medlock51 Offline
member

Registered: 06/15/16
Posts: 84
Loc: Wisconsin
I have two small block forged cranks for sale. $135/each. Mic to standard. Will need to be cleaned and maybe polished. Central Wisconsin.

Top
#2329872 - 07/01/17 05:20 PM NOS Holley Mechanical Center, 6 Pack, 6bbl. Carburetor #4782 [Re: moparts]
hemi71x Offline


Registered: 01/20/03
Posts: 4790
Loc: Rancho Cordova, California (Sa...
I have an NOS, new in the box, Holley center, 6 Pack, 6 BBL, Mechanical carburetor, #4782 up for sale.
These carburetors were the competition, performance, race, carbs over the production street versions.
Rated at 500 CFM.
The fuel inlet is on the Left side of the float bowl, not like the production 340, 440, street versions.
The outboard carburetors did not have vacuum pods on them, hence the term mechanical carburetors.
Holley hasn't produced these in years, so they are very difficult to find, in this day and age.
$600.00 + Pay Pal, and FEDEX'ing with insurance, and signature delivery charges on the package.
That's the price.
Not interested in any "trades" low ball "offers" for this part.
Interested, serious buyers, send me a pm thru this forum.
Thank's
Jim V.


Attachments
Holley Mechanical Carb 001 (Small).JPG

Holley Mechanical Carb 002 (Small).JPG

Holley Mechanical Carb 004 (Small).JPG

Holley Mechanical Carb 005 (Small).JPG


_________________________

RF-4C Phantom 69-370 Zweibrucken, Germany

Top
#2329881 - 07/01/17 05:38 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
6PAX Offline
master

Registered: 01/20/03
Posts: 4433
Loc: Metro Detroit
Cal Custom El Toro air cleaner wing nut. $5

Used chrome thermostat housing. $5

Four new extra wide chrome valve cover hold down clamps. $10 for the set

New exhaust manifold heat stove to air cleaner hose. $20

Original Cal Custom 14" finned aluminum air cleaner with filter. $100

Original Cal Custom 9" finned air cleaner top and base. No filter. $75

1970 Style single nipple oil breather with hose. $35

New 12" oval 4 barrel finned aluminum air cleaner with filter. It measures 12" L x 8 1/4" W x 3" H and has a 5 1/8" carb opening. $60

AC alternator bracket from a mid 70s 360. $15

Good used intake to water pump crossover hose from a mid 70s 360 with AC. $5

Small block passenger side biscuit motor mount bracket. $30

137 New Spectre brand radiator and heater hose clamp covers. Some chrome, some red and some blue anodized. Various sizes. $50 for the lot.

New Cloyes C-3028 small block Mopar timing chain. $25

Carb. throttle linkage stud. $10

Two 318 driver side spool motor mounts pt#3642811. One is used and one is NOS. $20 for the used. $35 for the NOS.

Pair of factory small block valve covers. Not sure of year. Nice shape. $75

1971 318 intake & 2 barrel carb. $100

Email: gt340 at yahoo.com

Top
#2330141 - 07/02/17 10:00 AM For Sale: Small Block Heads - Reconditioned [Re: moparts]
vinnyd76 Offline
super stock

Registered: 04/25/12
Posts: 757
Loc: Macomb, MI
For sale is a set of small block (360) heads that have been reconditioned and ported (at least Stage-I). The heads have been machined for Teflon seals, resurfaced including harden seats and guides. Casting Number: 3671587

The intake size is 2.02 and exhaust size is 1.60. Cylinder head volume combustion chamber is 68. New comp valve springs, dual, 1.437 in. outside diameter, 402 lbs./in. rate, 1.020 in. coil bind height.

If you have any questions or request additional information, please send PM.

Location: Metro Detroit

Price: $700 obo

I can deliver to Carlisle.


Attachments
360 Heads_1of2.JPG

360 Heads_2of2.JPG

360 Heads_ intake port.jpg




Edited by vinnyd76 (07/02/17 10:51 AM)

Top
#2330391 - 07/02/17 08:17 PM Re: 1971 340 SHORT BLOCK ASSEMBLY [Re: moparts]
PHYSIXX Offline
pro stock

Registered: 04/07/04
Posts: 1514
Loc: Edison, New Jersey
BLOCK IS .010 OVER
CLEANED, BORED AND HONED
BLOCK HAS BEEN LINE HONED
CASTING DATE 9-29-71
NEW DIAMOND HIGH COMPRESSION 11.0:1 PISTONS
NEW MOPAR PERFORMANCE FILE FIT MOLY RINGS
OEM STEEL CRANK CUT .010/.010
OEM FULL FLOATING STEEL RODS, NEW BUSHINGS, RESIZED & SHOT PEENED
NEW SPS ROD BOLTS
BALANCED ROTATING ASSEMBLY
NEW CLEVITE CAM, ROD AND MAIN BEARINGS
FACTORY WINDAGE TRAY SETUP
NEW EXPANSION PLUGS
NEW MOPAR PERFORMANCE .557/.557 LIFT SOLID LIFTER CAM & LIFTERS #P4120655
NEW MELLING HV OIL PUMP
NEW CUSTOM DEEP SUMP OIL PAN WITH PICKUP
NEW SFI APPROVED HARMONIC BALANCER
NEW CLOYES TRUE ROLLER TIMING SET #9-3103-5
LATE STYLE TIMING COVER

WILL NOT WORK WITH CLOSED CHAMBER HEADS

COMPLETELY ASSEMBLED & PAINTED HEMI ORANGE

$2,950.00
plus shipping from Edison, NJ 08820

I can also help with shipping arrangements, crating and delivery to truck terminal for a small fee.

rider1454 at aol.com


Attachments
DSCN3943.JPG

DSCN3944.JPG

DSCN3753.JPG




Edited by PHYSIXX (07/02/17 08:18 PM)

Top
#2330457 - 07/02/17 10:32 PM Small Block Engine - TTI Shorty Headers - Ceramic SOLD [Re: moparts]
Mattax Offline
super stock

Registered: 02/28/10
Posts: 938
Loc: Phila. Pa.
Early production set of TTI Shorty Headers with early production headpipes.

Mocked up but never used. Has grease spots...
In Downington, Pa. Can be delivered to Carlisle.
SOLD

* 1 5/8 primaries, 2.5" collector.
* Coated with Swain "white lightning" (which is zirconium dioxide probably with with ytrium).
* This is an early production set.
Should be good fit in a B or E body.
On an '67 and up A-body, maybe, but NO guarentee.
- Head pipes may hit floor pan (new version may fix this)
- column shift linkage interferes
Will NOT fit pre 1967 A-bodies.

Ground clearance should be very good.
Installation is relatively easy (but not as easy as cast iron manifolds if thats your standard).

PM or e-mail via Moparts
More pictures and links showing fit: www.heritech.org/cuda/TTIshorty.html


Attachments
TTI-Shorty-Driverside-cropped.jpg

Description: Driverside before mockup

PS-after-mockup.jpg

Description: Passenger side after trial fit.




Edited by Mattax (07/17/17 09:33 PM)
Edit Reason: SOLD

Top
#2330551 - 07/03/17 07:41 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: Scamp408]
sogtx Offline
master

Registered: 07/25/03
Posts: 4691
Loc: upstate western ny
E58 short block
$200 delivered to carlisle with deposit

In rochester ny now

Top
#2330562 - 07/03/17 08:25 AM FOR SALE - 1969 340 X heads for cores $340.00 [Re: moparts]
Alaskan_TA Online   content
Fluffy Balladeer

Registered: 01/20/03
Posts: 25831
Loc: Still moving in.
1969 340 X heads for cores, one day apart, 108th & 109th days of 1969. $340.00

Fresh machine shop evaluation

Magnafluxed- no cracks.

They were also pressure tested & checked for warp with no issues reported.

They need;

Timeserts in 4 exhaust bolt holes & he did not put it on the invoice, but he said the intake surfaces could be lightly planed due to some roughness.

Valves & old hardware included if you want them, one exhaust valve broke when they were disassembling a head.

All of the exhaust valves have some type of sleeve / insert. One stand is broken under the valve stem seal area.

Any machine work / new parts etc. would be up to the buyer.

I will hold for Carlisle pickup for $140.00 down via Paypal & the rest due in cash at time of pickup.

Emails only - sixpak340(insert at symbol here)att.net


Attachments
x heads for wiw.JPG

x heads for wiw 2.JPG



Top
#2330610 - 07/03/17 10:05 AM Re: FOR SALE - 1970 340 [Re: moparts]
03dodgeram Offline
member

Registered: 12/31/07
Posts: 191
Loc: mass
70 340 complete minus carb and intake. It spins and been turned over once a month. It has j heads.1200.00 or best offer. Will bring to carlise in july if paid for. allmoparparts64@yahoo.com


Edited by 03dodgeram (07/03/17 10:06 AM)

Top
#2330718 - 07/03/17 01:22 PM Comp Cams Small Block Solid Roller– Used [Re: 03dodgeram]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
I have a nice Comp Cams solid roller camshaft with dyno time usage only. Lobes look very nice and show little signs of use. Specs are as follows:

Comp Cams part #20-730-9
Comp Cams grind # CRS 310C-R6
Lobe lift 0.418" / 0.425" intake / exhaust
Lift with 1.5 rockers 0.627" / 0.638" intake / exhaust
Advertised duration 310 degrees / 312 degrees intake / exhaust
Duration @ 0.050 lift 276 degrees / 281 degrees intake / exhaust
Lobe Separation Angle 106 degrees
Installed centerline 106 degrees (no ground in advance)

Price is $190 shipped in the lower 48 states. I will ship internationally for the additional cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.


Attachments
P1040581.JPG

P1040582.JPG



Top
#2330782 - 07/03/17 03:23 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
trucker5481 Offline
member

Registered: 12/20/15
Posts: 5
Loc: us
small block 340 bushed rods in good condition, came out of a 72 360 motor with 102,000 miles on it. asking $50.00
pm me here or call 563-349-2249

Top
#2330888 - 07/03/17 04:54 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
Baxter61 Offline
top fuel

Registered: 11/26/04
Posts: 2485
Loc: Oregon City, OR
71 340 block, +.040 TRW Forged pistons, rebuilt rods with ARP bolts, forged crank freshly ground, balanced rotating assembly with B&M flexplate, new Cam bearings installed along with block hardware. New bearings and rings. Comp xe268h cam and lifters (have other cam choices if you like)

915 J heads with 2.02/1.60 stainless valves, hard exhaust seats, Comp springs and retainers. Edelbrock RPM intake.
Yes it's in pieces and needs assembly.

$3600 Located in Gladstone, OR 97027. Can ship through fastenal for about $300 or other carriers for more. Email AmoB64@msn.com or message me here!

[/URL]

[URL=http://s114.photobucket.com/user/Baxter61/media/71%20340/IMG_2027.jpg.html]


Edited by moparts (08/25/17 04:55 PM)

Top
#2332485 - 07/06/17 11:40 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
318 Pistons 60 Over
**New in the Box**
LC371P .060
TRW# L3016F - 60

Located in Walkertown NC
(Outside Winston Salem NC)

PM here or
Contact Mark
Office (336) 595-2000
Cell (336) 399-7262

[img:center]http://[/img]
[img:center][/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2332783 - 07/06/17 08:42 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: TheBlackRose]
rt66jim Offline
master

Registered: 01/19/03
Posts: 3908
Loc: Joplin, Mo

Ultradyne cam and Comp solid lifters NIB. Cam specs: Grind # NFG63F6 Int. dur. @ .050 267 Exh dur. @ .050 267 Gross lift int. .609 Gross lift exh .609
lash .016 int & exh. Lobe separation 106*

$225 + frt

PM me here Jim

Top
#2334088 - 07/09/17 12:06 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
TheBlackRose Offline
member

Registered: 07/06/17
Posts: 3
Loc: California

I'm selling my 1970 340. I bought this as a future motor for an valiant project but I'm Gunna stick to my B Body's.. this motor was built in the early 2000's and was in a dart. The motor has 12 passes on it and as you can see it's very fresh inside. It features a steel 340 crank with stock rods, Ross 12:1 pop up pistons. Cam is a Mopar 590 purple shaft with Smith brothers push rods and gold crane rockers. The heads are X heads ported to the moon and 2.08 intake valves!. It comes with 2 intake mainfolds stock, and a Holley Strip Dominator. I have TRW 10.5:1 forged pistons that will also come with the motor. Now I opened the motor up to have a look so it will need to be re sealed up inculding the head gaskets which I have a felpro gasket set I'll send with you. Only thing I have done is repaint the motor. So who ever gets this they have a choice between stock compression for a sweet street motor or a nasty little 12 to 1 pissed off 340. You can ask me any questions you would like I'll do my best to answer quickly. I will ship it need be for an additional cost. Thank you for looking!!! $3500.00 OBO

I have tons of pics call me at 6614064033 for more if interested. Cant seem to get them loaded on here...

Chris

Top
#2334383 - 07/09/17 09:02 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
schmitty Offline
super stock

Registered: 07/26/04
Posts: 784
Loc: IN
Greetings - I have a very nice lightly used AR Engineering throttle bracket for small block mopars needing higher throttle positioning. AR part number is AR004. Works great with Holley, Demon or Edelbrock carbs. I had it professionally powdercoated as the factory zinc coating lasts about 2 seconds. My set up is changed so I can no longer use. SOLD THANKS MOPARTS!!!. Best to call 260-223-0868 up until 8pm est or schmittyjsathotmaildotcom Thanks Moparts!!!


Edited by schmitty (07/12/17 08:42 PM)

Top
#2334433 - 07/09/17 10:14 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: TheBlackRose]
beaver77 Offline
member

Registered: 09/02/09
Posts: 48
Loc: Iowa
Dodge 318 and 904 trans good running engine has some oil leaks can hear run preferlocal pickup trans works good to 250.00 obo or trade for any complete big block engine
Joshtoland66@hotmail.com

Top
#2334645 - 07/10/17 10:30 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
Mopar Roller Cam Shaft CHRY 273-360
Part# 20-000-13
Valve Adj- 0.25
Gross lobe lift- .682
020 Tappet lift- 305/311
$275

pm here
or contact Mark @
336-595-2000
336-399-7262

[img:center][/img]
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2335591 - 07/11/17 09:05 PM 1968 318 and 904 trans [Re: moparts]
moparguy1941 Offline
member

Registered: 01/13/13
Posts: 6
Loc: Crystal Lake, Illlinois
1968 318 with 904 trans. Running engine with edelbrock performer intake and carter carb. Bought for my dart project but going with 340 instead. Located in crystal lake, Illinois. Asking $550. Contact at hotrod1941@att.net

Top
#2335862 - 07/12/17 10:50 AM Re: 1968 318 and 904 trans [Re: moparts]
Telvis Offline
mopar

Registered: 09/24/13
Posts: 464
Loc: KY
I am relocating in 3 weeks and have some things I can't take with me. I have a 318 that has less than 3k miles on it. It was a Jasper long block and I put a 340 cam, edelbrock intake and Holley 650 4bbl carb on it. I had it in my challenger one summer the swapped it for a 340. It's been sitting on an. Engine stand for about 3 years. It's essentially a new motor. I want to see it go to someone who needs it. Ready to drop in your car. $500 or best offer. Must pick up in Lancaster, ky. I also have a nice 904 trans too. $50.

Pm me or call me at 8594204006. Tim


Edited by Telvis (07/12/17 10:51 AM)
_________________________
That's King Weenie to you!

Top
#2336913 - 07/14/17 12:46 PM Edelbrock Performer Intake 3776 $100 plus shipping [Re: moparts]
Adam71Charger Offline
pro stock

Registered: 06/01/13
Posts: 1460
Loc: Tacoma, Washington USA
EDIT: $100 plus shipping

4 barrel aluminum intake for 318/360. Edelbrock # 3776 with the EGR crossover. It is identical to the 2176 performer, just has provisions for an egr valve that can be blocked if desired. It actually costs more than the 2176 and is a tad lighter.

It can be used in 3 ways:

The egr passage itself can be used or blocked off with intake gaskets that have no hole for egr.

Or, block the egr mount only on top of the intake if you want the benefit of faster warm up but no egr.

Or, dont block either and use an EGR valve.

It is $305 new, Im selling locally for $150, but I will sell for $100 plus shipping to moparts member. It has a water neck on it as well.

Its pretty light so I dont think shipping will be to much, probably around 18 to 35 bucks UPS. If you have a shipping account somewhere and you can do it cheaper then Ill glady package it and send you the dimensions and weight and you can email me a shipping label. Whatever's clever. I live in tacoma wa, and Im near usps, ups, and fedex

I do ask that we use the send money option in paypal so I dont get hit with a fee, unless you want to pay the fee for me. call or text me 253 691 4880 or pm me here at moparts

Pics:

https://www.amazon.com/photos/share/XW52HQ45tzMcdyIsJatQeCNrmr72uWEO8Ly132bTH4L

https://www.amazon.com/photos/share/Jy80U4A2xSJNnC27JupqLdmKDX4UsT1IYKnM0rkz73y

https://www.amazon.com/photos/share/oGMKOhkbYV8ovTSqdGM5SJXrP2WPiQU9FxGTgRKlBqU


Edited by Adam71Charger (07/14/17 04:42 PM)

Top
#2338916 - 07/18/17 08:15 AM Re: [Re: Adam71Charger]
chrisnben Offline
super stock

Registered: 11/16/03
Posts: 946
Loc: Madison, Wisconsin
Couple LA 318, 340, 360 sale parts:

90 degree oil filter adapter. $95 shipped

LA Holley Street dominator intake manifold. Very clean, no issues. $125 shipped

PM me here for details, thanks!
_________________________
'70 Cuda "Badfish 2"- in the works

Home of MoPar University- We school 'em one at a time!!

Top
#2339344 - 07/18/17 07:11 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
dart4forte Offline
I Live Here

Registered: 01/31/03
Posts: 13690
Loc: Mesa, Arizona
Carter/Webber Competition Series Carb, list 9636. This the performance replacement for 340/383. This came off a running car

$125 plus $18.95 shipping


Mesa, AZ


Attachments
IMG_0208.JPG



Top
#2341735 - 07/22/17 09:25 PM factory Intake 273 318 340 360 [Re: dart4forte]
davesmopars Offline
master

Registered: 08/01/04
Posts: 2713
Loc: cheshire, ct
factory Intake 273 318 340 360
and a couple of aluminum
30.00 and up plus shipping
factory
3512100 - 71 340 110.00
3671918 - 72 73 340 50.00
3698434 - 74 360 50.00
3671918 - 72 73 340 50.00
3462848 - 70 340 120.00
2806301 - 68 69 383 80.00
2806301 - 68 69 383 80.00
3830733 - 74 76 440 40.00
3698444 - 73 440 40.00
3698444 - 73 440 40.00
2806178 - 67 68 69 440 90.00
2206000 - 62 63 64 65 66 413 426 440 90.00

aluminum
Torker 440 professionally ported real nice work 150.00
Weiand 440 tunnel ram with 2 660center squirters air cleaners and linkage 750.00
edelbrock db4b 383 150.00 one carb hole enlarged
edelbrock LD340 center performance mod done 350.00
mopar M1 w2 intake 250.00
edelbrock victor w2 intake 250.00
offenhauser early 273 intake 150.00
Weiand Say why And - 440 413 426 175.00


Attachments
fullsizeoutput_1a2e.jpeg

fullsizeoutput_1a2e.jpeg




Edited by davesmopars (07/24/17 12:20 PM)

Top
#2341861 - 07/23/17 08:24 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
JudyLuvsBees Offline
enthusiast

Registered: 06/09/11
Posts: 279
Loc: New York
I have two 340 short block assemblies both were rebuilt at one time, both should still run, both are .030 over w/ L2316 TRW pistons, both have miles on them but no cylinder wall wear, both have a steel crank, good oil pans,pick up screens and windage trays.
The red one is a 1970 it came with matching X heads aluminum intake and valve covers. The blue one is a 72 model year, casting date was 9/71 . Pricing...lets start here $900 For each short block and the x heads intake and valve covers are extra.
I also have a 73 340 block that has been magnafluxed and cleaned, never bored out, for $500 and same on another that has pitting in two cylinder walls for $250. Make an offer


Attachments
20160715_134327.jpg

20170723_083529.jpg

20170723_083529.jpg




Edited by JudyLuvsBees (07/23/17 08:43 AM)

Top
#2342476 - 07/24/17 01:50 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: JudyLuvsBees]
Tooldude Offline
mopar

Registered: 01/23/09
Posts: 490
Loc: So Cal
New 408 engine from summit $4500.00
Has gone to the dark side installing
6.4 hemi.
Call or text David at 805.276.8133
or Mark 818.425.3967


Attachments
IMG_3832.JPG




Edited by Tooldude (07/24/17 01:54 PM)

Top
#2342549 - 07/24/17 03:22 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
Bad340fish Offline
master

Registered: 01/20/03
Posts: 5273
Loc: Tulsa OK
I have a July 1969 340 block for sale. The block has been bored .020 over but has yet to be honed, hone it to fit your pistons. The block has been vat cleaned, and line honed.

I have had this block for a long time, I have done my best to keep it clean and rust free. It does have some light surface rust on the main saddles and in the bores. Nothing that will cause a problem. It has to be honed anyway to fit your piston clearance specs.

Item is located in Tulsa Oklahoma and I am willing to meet in a reasonable distance or I can pallet and ship. I will not charge anything to palletize as long as the buyer arranges pickup at my work(commercial location easy pickup).

This link will take you to an amazon gallery with 5 photos. PM me here or Email at Clamb12 at gmail dot com.

$550

https://www.amazon.com/photos/share/QhMQ3NYwHPhWt9cBVlFYaC7c0ECIGjZ1SS1nXvBtb9X

SOLD Thank you


Edited by Bad340fish (08/24/17 08:54 PM)
_________________________
68 Barracuda Formula S 340

Top
#2343287 - 07/25/17 07:42 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
challenger6pack Offline
mopar

Registered: 04/28/03
Posts: 540
Loc: USA
90 degree oil filter adapter. Needs cleaned.The washer under the boot is missing. I'm asking $50 + actual shipping costs from south Florida. Paypal add 3%. I can be reached by PM. Thanks.

Top
#2343748 - 07/26/17 02:22 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
67-68 A body Bell Housing Part # 081
$125

Located in Walkertown NC
(outside Winston Salem NC)

PM here or contact Mark
Office 336-595-2000
cell 336-399-7262
[img:center]http://[/img]
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2343750 - 07/26/17 02:26 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
64-66 A Body Bell Housing Part# 523

$125

Located in Walkertown NC
(outside Winston Salem NC)

PM here or contact Mark
(336)595-2000 M-F 9-5 pm
(336)399-7262 after hours


[img:center]http://[/img]
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2343836 - 07/26/17 04:53 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
RapidRobert Offline
Circle Track

Registered: 11/20/03
Posts: 32530
Loc: Lincoln Nebraska
eddy 1406 600 CFM. worked fine when car was totalled a year or so ago & worked fine on an engine breakin a few months ago. $199 + the ride. EDIT better pic added


Attachments
SAM_0764.JPG

SAM_0765.JPG




Edited by RapidRobert (07/26/17 05:14 PM)
_________________________
live every 24 hour block of time like it's your last day on earth

Top
#2343922 - 07/26/17 07:43 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
budman1965 Offline
super stock

Registered: 08/02/05
Posts: 711
Loc: Edison, NJ 08817
Set of used Hooker small block Super Comp headers. Part # 5115. These fit B and E body cars 1966 thru 1977. 1 3/4" tubes by 34" long. These were on the car only a short time and then removed and stored in the garage for many years. Tubes are strong with surface rust. The third picture shows a small dent in the lower tube. Rest are straight with no dents. SOLD! Contact Bud 732-287-0982 or Kramden426@aol.com. Will be at MOPARS at Englishtown August 26 and 27


Attachments
sbhook1.JPG

sbhook2.JPG

sbhook3.JPG




Edited by budman1965 (08/29/17 08:05 PM)

Top
#2344190 - 07/27/17 09:32 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
Very rare 1971 340 SIX PACK set up off of a Mr. Norms Grand Spaulding Dodge GSS Demon $2500.00 (708)288-2879 Scott


Attachments
parts 3-28-17 003.JPG

parts 3-28-17 004.JPG

parts 3-28-17 005.JPG



Top
#2344320 - 07/27/17 11:57 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
Vintage Edelbrock Poly 318 tri-power setup, has Ford carbs, The intake is in nice used condition, the carbs are not as nice $850.00 for the setup (708) 288-2879 Scott


Attachments
parts 7-25-17 005.JPG

parts 7-25-17 004.JPG

parts 7-25-17 002.JPG



Top
#2344897 - 07/28/17 02:07 PM 1971 340 carb 4973 [Re: dsd70bee]
davesmopars Offline
master

Registered: 08/01/04
Posts: 2713
Loc: cheshire, ct
1971 340 carb 4973
In good shape
everything moves and turns one air bleed screw broken off
48 states a little more else where
pm me here

****sold****


Attachments
IMG_7321.JPG

IMG_7314.JPG




Edited by davesmopars (08/07/17 05:50 PM)

Top
#2345260 - 07/29/17 11:47 AM W2 & W5 Harland Sharp Roller Rocker Arm Kit-New [Re: davesmopars]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
For sale is a new set of small block Mopar Harland Sharp aluminum roller rocker arms, shafts and blocks for the W2 and W5 Mopar Performance cylinder heads. Intake and exhaust rockers are 1.5 All rockers, shafts and blocks are new. These rockers can be used on W2 heads with milled pedistals and W5 small block Mopar cylinder heads.
Part number S70025W2k.

Description from the HS site and some links are below.

* Needle bearing allow for more oil flow to the rockers.
* Oil restrictors may be necessary to maintain oil pressure.
* Rockers are designed for big lift cams requiring .100 to .150 taller valves.
* Rocker shafts are drilled to allow for 3/8 mounting hardware.
* Rocker spring clearance is limited to 1.500 if more spring clearance is
required, contact our customer service department to discuss your options.
* W2/W5 Race kits come with .180 offset shafts & stands.
Instructions
Harland Sharp needle bearing, single shaft mount, rockers for Small Block
Chrysler are like no other on the market. The only shaft rocker of this style to feature heavy duty needle bearing fulcrums matched with specially heat treated, heavy wall, rocker shafts. Harland Sharp Mopar kits are designed for extreme applications with valve springs up to 1.500 diameter and .900 lift cams. The
7/16-20 x 5/16 ball adjusters are designed for use with the factory style pushrods, length to be determined after you have rockers installed. Harland Sharp SB Mopar kits require taller valves. Approximately .100-.150 are necessary for correct geometry but sometime lash caps can be used. Kits include rocker arms, shafts, spacers, rocker stands, adjusters and nuts. See our instruction link for replacement and service parts #s.

New price for kit including rockers, shafts and blocks is $1,188 at summit. I will sell my new set for $950 shipped in the lower 48 states. Feel free to contact me to discuss.

Email procketrichard@hotmail.com for more information and pictures.


Attachments
P1020310.JPG

P1020321.JPG



Top
#2345685 - 07/30/17 11:02 AM Alternator Bonanza Check Numbers and Dates Codes [Re: moparts]
blewbyu Offline
master

Registered: 01/22/03
Posts: 3208
Loc: Florida
These are all rebuildable cores, may be able to use as is but being sold as cores.

2098830 23-63 Non original rear Brg. $ 50.00

All these are # 2642537

Date 29 - 68 All Original rear Brg Never Apart $200.00
Date 4? - 68 Non Original rear Brg Hard to read date $125.00
Date 4? - 68 Non Original rear Brg Hard to read date $125.00
Date 2 - 69 Non Original rear Brg $175.00
Date 5 - 69 Non Original rear Brg $175.00

2875714 Date 31 - 68 Non original rear Brg. $100.00
2875714 Date 22 - 69 Non original rear Brg. $100.00

2875724 Date 5 - 69 Non original rear Brg. $195.00

3438171 Date 35 - 69 Non original rear Brg. $125.00

3438178 Date 1 - 70 All Original rear Brg Never Apart $200.00

Plus shipping from Florida

blewbyu2bad@aol.com

Top
#2345822 - 07/30/17 04:40 PM TTI 1 7/8" Headers [Re: moparts]
Headhunter22 Offline
enthusiast

Registered: 03/20/09
Posts: 236
Loc: Lawton, MI
TTI 1 7/8" header set for small block. Model TTI340A17835-c4. Brand new. Kit includes bolts,gaskets, collectors. $700, can deliver to Nats or willing to ship. Locat d in SW MI, pm me on the board.

Thanks for the ad moparts,

SOLD


Attachments
IMG_0001.JPG

IMG_0002.JPG




Edited by Headhunter22 (08/02/17 06:55 PM)

Top
#2345951 - 07/30/17 08:54 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
Cuda67408 Offline
member

Registered: 01/04/17
Posts: 3
Loc: ID
Set of never used Badger 273 .060 over pistons. Full floating wrist pins.

$180 plus shipping


Attachments
IMG_0938.JPG




Edited by Cuda67408 (07/30/17 09:47 PM)

Top
#2346277 - 07/31/17 03:04 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
crabman173 Offline
master

Registered: 01/01/06
Posts: 3536
Loc: Big Lick , North Carolina
Set of alternator and power steering brackets and bonus throttle linkage deal--get it all for $35 shipped free dusterdave173@gmail.com Thanks


Attachments
MOP 003.JPG

Description: 5


_________________________
I have always had a fascination with fast cars at the expense of more normal character development

Top
#2347412 - 08/02/17 03:35 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
1970 340 4-speed Carter AVS carb core to restore, #4933, date code K9, it has it's original idle stop solenoid and it's original carb tag $350.00 (708)288-2879 Scott


Attachments
parts 8-1-17 019.JPG

parts 8-1-17 022.JPG

parts 8-1-17 023.JPG

parts 8-1-17 024.JPG



Top
#2347593 - 08/02/17 09:35 PM 340 rotating assembly [Re: moparts]
GKMOPAR Offline
mopar

Registered: 03/09/07
Posts: 681
Loc: Hilliard, Ohio
Have a 340 rotating assembly. Forged crank has been turned, TRW 0.030 forged pistons, flywheel and rods. Assembly has been balanced and ready to go. $750 Can deliver to Mopar Nationals on Friday for free.


Attachments
20150806_215408 (800x601).jpg

20150806_215440 (800x748).jpg



Top
#2349654 - 08/06/17 05:33 PM 408 Stroker [Re: moparts]
WadeMetzinger Offline
top fuel

Registered: 02/04/04
Posts: 1932
Loc: Tulsa, Ok
_________________________

Wade Metzinger 918-809-0987
71 Cuda 9.28@145 -1s, Pglide
68 Cuda 10.70@124 1.45 60's 318->390 eddys
Moparts discount code on WIX - moparts www.Filter1.com

Top
#2350078 - 08/07/17 12:36 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
CAK Offline
member

Registered: 08/16/07
Posts: 44
Loc: S.E.Mich
Mallory dual point distributor, $35, Can deliver to the Nats, 313-805-0149

Top
#2350482 - 08/07/17 11:56 PM 72 340 intake [Re: moparts]
GKMOPAR Offline
mopar

Registered: 03/09/07
Posts: 681
Loc: Hilliard, Ohio
Clean 72 340 intake. Can deliver to Nationals on Friday. $50
Gerry


Attachments
20170807_221225 (450x800).jpg

20170807_221136 (800x450).jpg




Edited by GKMOPAR (08/10/17 06:51 AM)

Top
#2354262 - 08/15/17 01:05 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
junkyardmaxie Offline
master

Registered: 08/24/03
Posts: 3451
Loc: OH
SOLD have for sale real nice set of adjustable rockers complete s/b 340 $250. plus shipping


Attachments
015 (Small).JPG




Edited by junkyardmaxie (08/17/17 10:27 AM)

Top
#2354292 - 08/15/17 01:53 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
cdp Offline
master

Registered: 01/31/03
Posts: 3349
Loc: MO
Small block 90 degree aluminum oil adapter. Excellent condition. With new seal kit. $85 plus shipping.

P.m. me here, or 816 726 45onetwo.


Attachments
20170625_094015.jpg

20170625_094015.jpg



Top
#2354560 - 08/15/17 10:22 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
themoparmanjc Offline
member

Registered: 08/16/15
Posts: 76
Loc: Wisconsin USA
65 273 4 barrel stock iron intake. Casting number: 2465726. $200 plus shipping. Can get pictures if interested.

Top
#2355931 - 08/18/17 08:37 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
rpagan Offline


Registered: 04/15/14
Posts: 34
Loc: Florida
Engle solid lifter cam. New installed and never ran. Removed for hyd. lifter cam. Cam specs. .561 lift 247@ .050 dur on a 110 centerline. $120.00 plus shipping. PM me here or call 727-226-zero-one-five-nine. Rick

Top
#2356148 - 08/18/17 03:14 PM Re: 340/360 biscuit style engine mount brackets B/E body [Re: moparts]
PHYSIXX Offline
pro stock

Registered: 04/07/04
Posts: 1514
Loc: Edison, New Jersey
I have for sale two sets of biscuit style 340/360 B/E body engine mount brackets that are all in great shape. They just need to be cleaned and painted. These brackets will NOT fit the A-body cars as the rubber mount holes are in a different place. I would like to get $30 per set plus the shipping.

Edison, NJ
rider1454 at aol.com

The lower set in the pictures has been sold.


Attachments
DSCN4149.JPG

DSCN4152.JPG




Edited by PHYSIXX (08/19/17 03:26 PM)

Top
#2357545 - 08/21/17 11:12 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
67R/T4speeder Offline
pro stock

Registered: 02/03/07
Posts: 1358
Loc: Pismo Beach,California
L9 4933S 340 Carter

Just took off my Dart and runs very well. Not corroded at all. I had a manual choke and did not have a pull off installed.

$175.00 + shipping


Attachments
KIMG0441 (2).jpeg

KIMG0440 (1).jpeg


_________________________
Andy








www.troxellsgarage.com

Top
#2357824 - 08/21/17 08:02 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: 67R/T4speeder]
pittsburghracer Offline
Slowride

Registered: 02/02/05
Posts: 11775
Loc: PA.
New set of Arias Speedmaster .030 over stock stroke 360 pistons with .984 piston pin size. Piston pins are also included but you will have to buy a set of pin retaining clips from Jegs or Summit. 275.00 firm PLUS shipping from 35 miles NE of Pittsburgh, PA. PM or jacadamore@gmail.com


Untitled by John Cadamore, on Flickr


Untitled by John Cadamore, on Flickr



Untitled by John Cadamore, on Flickr
_________________________
1970 Duster
Edelbrock headed 408
6.143@110.89 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
6.004@113.27mph
9.56@137.89

https://flic.kr/p/WjECmg

[img]http://i.imgur.com/Z4SvNU4.jpg?1[/img]



Untitled by John Cadamore, on Flickr





Top
#2359933 - 08/25/17 08:42 PM Rohcester Quadrajet 4BBL Carb. 17087175, 1985-88 Dodge Truck [Re: junkyardmaxie]
streetkit Offline
pro stock

Registered: 01/22/03
Posts: 1419
Loc: Northern CA
Rochester Quadrajet 4BBL Carburetor. 17087175, 1985-88 Dodge Truck Carb. Carb is used and has been sitting for a long time. Also semems to have had some moisture issues. Selling it for parts, but with a thorough cleaning and rebuild it may work fine.

$49 shipped to your door anywhere in the USA.

Located in CA

glolas@comcast.net


Attachments
20170825_172124.jpeg

20170825_172223.jpeg


_________________________
1973 Dodge D100

Top
#2360149 - 08/26/17 12:13 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
gtsdude Offline
super stock

Registered: 10/28/05
Posts: 820
Loc: S.E. Minnesota
[SOLD]Small block 90 degree oil filter adapter, $40 shipped.[SOLD]


Attachments
adapter.JPG




Edited by gtsdude (08/27/17 12:32 PM)

Top
#2360307 - 08/26/17 06:58 PM 340/360 Schumacher Mounts [Re: GKMOPAR]
MarkM Offline
top fuel

Registered: 01/13/05
Posts: 2043
Loc: USA, MI
SOLD! THANKS MOPARTS! up

For sale: Schumacher 340/360 spool motor mounts.

Swapped out to a big block. They're dirty, but otherwise nothing wrong with them. Cost $170 new with $18 shipping. I want $50 plus the ride. Located in Macomb, Michigan.

Send a PM if interested.



Edited by MarkM (08/31/17 09:05 AM)
_________________________
'87 Fifth Avenue: 512 low deck roller / 518 / 8.75


Top
#2360309 - 08/26/17 07:06 PM 3" to 2.5" reducers [Re: MarkM]
MarkM Offline
top fuel

Registered: 01/13/05
Posts: 2043
Loc: USA, MI
3" to 2.5" reducers for sale. $25 plus the ride. Located in Macomb, Michigan. PM if interested.

_________________________
'87 Fifth Avenue: 512 low deck roller / 518 / 8.75


Top
#2360821 - 08/27/17 07:47 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
JRepucci Online   content
master

Registered: 01/20/03
Posts: 2593
Loc: Sacramento,California
Carter Competition Series 625 CFM carb w/electric choke $125


Attachments
DSC01366.JPG

DSC01367.JPG



Top
#2360831 - 08/27/17 07:58 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
Eggman Offline
member

Registered: 12/29/15
Posts: 91
Loc: Georgetown de usa
Brand new in the box,Hughes whiplash 318 hydraulic roller camshaft. $250 shipped.

Top
#2361407 - 08/28/17 08:40 PM Re: W2 & W5 Harland Sharp Roller Rocker Arm Kit-New [Re: vinnyd76]
Shaker223 Offline
enthusiast

Registered: 10/03/06
Posts: 365
Loc: Motor City
Mis post.


Edited by Shaker223 (08/28/17 08:48 PM)
_________________________
11.02 @ 120 mph - Slant 6 & Turbo http://www.youtube.com/watch?v=EAxRmoDgsdY Chassis Dyno http://www.youtube.com/watch?v=wd6hFGzLJMc

Top
#2361828 - 08/29/17 04:07 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
CFB Offline
member

Registered: 07/29/17
Posts: 3
Loc: Michigan
Brand New K & N Filter for Six Pak. New in the box and sealed in the plastic.


Asking $60.00

Top
#2362020 - 08/29/17 08:47 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
mopar_muscle Offline
member

Registered: 06/27/07
Posts: 133
Loc: Idaho, USA
Holley carbs for sale. All need to be rebuilt but operate free. $50 each.


Holly # r4237, r1328, r2762, r3745, r3760, r3752, r1672


I cannot understand how to post pics here but can send to your email.
Contact me at mopar_muscle76@yahoo.com up

Top
#2362239 - 08/30/17 09:35 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
walleyebum Offline


Registered: 12/22/13
Posts: 10
Loc: chicago,il
EDELBROCK-LD340-ALUMINUM-INTAKE-MANIFOLD-MOPAR-DODGE-CHRYSLER-318-360
WITH MOPAR PART #S 300.00 PLUS SHIPPING


Edited by walleyebum (08/30/17 09:39 AM)

Top
#2362526 - 08/30/17 07:04 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
junkyardmaxie Offline
master

Registered: 08/24/03
Posts: 3451
Loc: OH
for sale 1968 340 small block SHORT BLOCK motor been cleaned at machine shop std bore std std steel crank, rods checked with new arp bolts,new rods and main bearing .new brass freeze plugs,new cam bearing . stock 10.5-1 pistons ,new rings ,new blue head gaskets. good used hp comp timing chain and gears , front timing cover ,and balancer ,new fuel pump,used water pump.$1750. also have a new set of std speed pro power forged pistons CR 11-1 to 12.5 to 1 depending on cc of heads extra $250. everything $2000.pick up ohio if interested send me a email at moparraceman@aol.com will send more pictures thanks


Attachments
001 (Small).JPG




Edited by junkyardmaxie (08/30/17 07:05 PM)

Top
#2363076 - 08/31/17 08:05 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: blewbyu]
mattsmopars Offline
master

Registered: 03/02/07
Posts: 2515
Loc: tennessee,usa
318 poly 2x4 intake. Part number is 1822004. it has some wooden spacers on it that I took off for one pictures. Nice original intake manifold. the oil splash shield on the bottom needs a little straighten up from being set around while off. Other wise I don't see any issues. Asking $400.00 plus the shipping cost. I have several pictures that I can email interested parties just PM me here.
Thank you, Matt


Attachments
IMG_8610.JPG

IMG_8622.JPG

IMG_8620.JPG




Edited by mattsmopars (08/31/17 08:07 PM)

Top
#2363248 - 09/01/17 02:02 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
MaddoxMopar Offline
member

Registered: 09/01/17
Posts: 2
Loc: Centennial Colorado
Wtb 360 LA, located in Colorado. Let me know what you have! Thanks. Pm on here or at jmaddoxyota@gmail.com

Top
#2363352 - 09/01/17 09:17 AM 2 running 1967 273 2bbl engines [Re: davesmopars]
440PURSUIT Offline
pro stock

Registered: 12/17/04
Posts: 1323
Loc: DC, MD Suburbs
Both in 67 Barracuda's.


Start and run. $350 or offer.

Also have working 904 trans attached
_________________________
1966 Hemi Belvedere II,
1968 Hemi Road Runner,
1969 Hemi Charger R/T,
1970 440 6pack Superbird,
1968 Fury I Police Pursuit 440 Super Commando 2 door sedan (Black/Blue)

Top
#2364626 - 09/03/17 01:11 PM Small Block Fluidampr - New [Re: schmitty]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
I have a new small block fluidampr part # 712420 that I purchased but will not be using. I purchased this a number of years ago and has been boxed and on the shelf.

Price is $375 shipped to the lower 48 states.

Contact me at procketrichard@hotmail.com for more information.


Attachments
P1040831.JPG

P1040832.JPG




Edited by Rocket (09/03/17 01:14 PM)

Top
#2364627 - 09/03/17 01:13 PM 360 small block 4 bolt main cap kit - new [Re: Rocket]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
I have a new 4 bolt main cap kit Mopar Performance part # P5249675 for 360 engines. These are the same main caps used for Mopar R series race blocks. They are ductile iron. They are a superior material to stock caps and use more material for strength. You can use these on a stock 360 block without using the outer bolt holes. Some builders cut off the outer 2 bolts for ease of installation. A great upgrade for stroker engine builds. Kit comes with 4 caps and bolts.

I have attached an example of what they look like when installed with the outer 2 bolts machined off. I used a similar 340 main kit (middle 3 caps only and sI did not have the first cap) on a 340 stroker I built.

This 360 main cap kit lists for $180 on summit. I will sell it for $140 shipped in the lower 48 states.

Contact me at procketrichard@hotmail.com for more information.


Attachments
P1040837.JPG

DSC00164[1].jpg



Top
#2365064 - 09/04/17 09:09 AM Mopar 426” sb 651hp street/strip motor [Re: moparts]
WadeMetzinger Offline
top fuel

Registered: 02/04/04
Posts: 1932
Loc: Tulsa, Ok
Mopar 426” small block

340 X block with splayed billet main caps and ARP fasteners, bushed lifters, decked/squared to 9.585, align honed, stroker clearanced (machine work performed by DRAM Dan Costello at Performance Only in Florida)

360-1 Indy heads ported by Dwayne Porter, with Harland Sharp rockers

K1 4.125 stroke crank with Chevy rod journals

Callies Compstar H-beam rods 6.200”

Diamond Custom forged pistons 4.060 bore, 1.308 comp height, Valve relief volume -6.7

Indy 360-1 Intake also ported by Dwayne Porter

Also includes a Mopar M-1 single plane intake modified to fit for street hood clearance

Hughes Engines custom street/strip billet roller cam and solid roller lifer designed specifically for this build by Dave Hughes

Made 651 hp and 585 torque on the Dyno with 91 octane pump gas, will make 700+ with race fuel and more timing.

All parts new except Heads, which only have about 200 passes on them and they they were freshened for this build.

text or email for pictures 918-809-0987

$18,500 less carb (no trades)
_________________________

Wade Metzinger 918-809-0987
71 Cuda 9.28@145 -1s, Pglide
68 Cuda 10.70@124 1.45 60's 318->390 eddys
Moparts discount code on WIX - moparts www.Filter1.com

Top
#2365203 - 09/04/17 12:38 PM 340 w/727 External balance flex plate [Re: WadeMetzinger]
racerx20 Offline
mopar

Registered: 02/17/09
Posts: 553
Loc: Houston, Texas
Cope Racing 340 external balance flex plate for use with external balance 340 and neutral balance torque converter. Light use, no racing. $80 shipped to the lower 48.
Cope Racing


_________________________
1969 Dart 408 W2
533 HP
540 ft lbs

1979 Lil Red Express
born the same month and year as me!

Top
#2366520 - 09/06/17 04:02 PM 1965 273 long block for sale [Re: moparts]
Hollywood Offline
mopar

Registered: 10/18/04
Posts: 473
Loc: Springboro, Ohio
I just pulled a running 273 out of a 1965 Barracuda automatic with AC. It was rebuilt by Jasper 17 years ago. Was still running with no noises. The reason for replacement is it had 55% leakage past the rings Mechanical valve train. Unknown bore size. Best offer. Located in Dayton, Ohio. Local pickup only.
[img:center]https://flic.kr/p/YgnkDa[/img]


Edited by Hollywood (09/06/17 04:07 PM)

Top
#2366771 - 09/06/17 11:40 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
82ramIndy493 Offline
pro stock

Registered: 02/09/03
Posts: 1528
Loc: crisfield, maryland 21817
For sale is a Carter carb # 9636 which I believe is a replacement carb for the 340 and 383 engines but I am sure with fine tuning it could be used on a variety of applications. I bought this for a project but the project has been sold so I no longer need the carb. I have removed the top to show you how clean the carb is and that all the linkages and shafts and also the air fuel screws work great. Asking price for the carb is 130 dollars shipped within the 48 states. PM me here or message me at "samson1156@verizon.net" with questions or purchase info. Thanks and have a great day.


Attachments
DSC04874.JPG

DSC04875.JPG

DSC04877.JPG

DSC04876.JPG




Edited by 82ramIndy493 (09/06/17 11:41 PM)

Top
#2368342 - 09/10/17 01:09 PM Indy 360-1 bare heads. *NEW* [Re: moparts]
CompWedgeEngines Offline
master

Registered: 11/03/04
Posts: 3367
Loc: Syracuse,NY
I have one set of Indy 360-1 bare heads, untouched, unported, brand new.They have the extra bolt holes for R3 type blocks.

I bought these for my own project years ago, and simply dont have time to get to them, or my project for that matter. My loss, your gain.

$1200 for the pair, bare, new. No valves, no parts.Indy racer price is $1785 a pair. Plus shipping. I ship Fed Ex.

I cannot do any work to these, so if you want head work done, you'll need to have your own shop do the work. I am just slammed right now and full for the Winter.

DO NOT reply to this post or PM me. Please use my email: compwedgeracing ( at) aol.com Make sure to put INDY360-1 in title, or it may not get read.

Cash or money order only. No credit cards.
Thank you.
_________________________
RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Top
#2368349 - 09/10/17 01:23 PM Indy RHS LAX/MAX cylinder heads * NEW* [Re: moparts]
CompWedgeEngines Offline
master

Registered: 11/03/04
Posts: 3367
Loc: Syracuse,NY
I have two sets of Indy RHS cast iron heads.

1) MAX, Magnum style rocker set up, new untouched, no work done Indy racer price, $880, take these for $650 plus shipping. ( they are heavy)

2) LAX stock shaft rocker style, with cleaned up bowls, flow around 275 cfm, valve guide cut for 11/32 valves, Indy racer price $880, take this set for $750 plus shipping.

These are really good heads, only down side is the weight, but they are nice thick robust casting, and they work very well.

cash or money order only. No credit cards.

DO NOT contact me here, please use my email: compwedgeracing ( at ) aol.com. Please put either INDY LAX or MAX HEADS in title, or it may not get read.

Thank You
_________________________
RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Top
#2368812 - 09/11/17 12:10 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: walleyebum]
don miller Offline
member

Registered: 08/07/06
Posts: 67
Loc: langley b.c. canada
Contact the seller via pm or e-mail. This is not a discussion forum!


Edited by tboomer (09/11/17 06:31 PM)
Edit Reason: not a discussion forum

Top
#2368883 - 09/11/17 02:09 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
autoglasspro Offline
enthusiast

Registered: 10/03/04
Posts: 397
Loc: p.a.

New competition cams 20-601-5 solid camshaft for small block mopar $120.00 New solid lifters sbm $40.00 .Small block oil filter adapters,$ 75 each. 1971 Plymouth 340 duster factory air cleaner $350.00. Early70's thick wall 360 complete block minus oil pan $350.00. 3 Small block mopar bellhousings,$150.00 each. Prices are all best offer,thanks moparts. wlucki@ptd.net

Parts are in bethlehem PA


Edited by autoglasspro (09/22/17 10:28 PM)

Top
#2369006 - 09/11/17 06:22 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
schmitty Offline
super stock

Registered: 07/26/04
Posts: 784
Loc: IN
*****NEW LOWER PRICE - PRICED TO SELL!!!*****
Greetings - This listing is for mopar small block la March brand 6 rib serpentine belt pulley conversion kit. Kit includes: waterpump, alternator and crank pulleys. If you have power steering or a/c you can purchase individual pulleys from Summit Racing or directly from March. The water pump pulley and alternator pulley are brand new and unused. The crank pulley was used on are dyno and shows signs of installation / has some light dings around the outside edge from valve adjustment - not horrible. Will take $125.00+ actual postage for the complete set. Call 260-223-0868 up until 8pm est or schmittyjsathotmaildotcom Thanks Moparts!
To view photos please copy and paste the following in your browser:

https://www.flickr.com/gp/153253365@N06/8sS82c


Edited by schmitty (09/17/17 02:59 PM)
Edit Reason: Price reduction

Top
#2369010 - 09/11/17 06:36 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
schmitty Offline
super stock

Registered: 07/26/04
Posts: 784
Loc: IN
Greetings - I have a like new phenolic mr.gasket 1" 4150 Holley carburetor spacer. Included with this is the Percy seal for good gasket that were used with this - suppose to be reusable. $20.00 + actual postage. Best to call 260-223-0868 up until 8pm est or schmittyjsathotmaildotcom Thanks Moparts!
Please view photo: https://flic.kr/p/XzJ8EY


Edited by schmitty (09/11/17 06:38 PM)

Top
#2369724 - 09/12/17 08:58 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
sparcy Offline
enthusiast

Registered: 02/21/09
Posts: 298
Loc: dracut mass usa
i have a 1974 30 k mile 318 its on a engine stand long block, NO intake ,have 2 v carb , pick up only dracut mass 01826 ,,,, cash 50.00 $$ its complete with manifolds and brackets . 978 771 0133

Top
#2370134 - 09/13/17 01:59 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: sparcy]
Paul_Fancsali Offline
master

Registered: 01/21/03
Posts: 2876
mid 70s 360 engine 30 over new pistons rings and bearings when assembled. Engine on stand for 27 years. new oil pump timing chain cover and pan included comp cam or mopar hemi grind I planned on 2 years on my current engine now year 27 on it so the hell with it want it gone. $700 way more in it part wise Also 360 flywheel for sale NOS $150 con tact me 412-352-1742 Pfancsali@gmail.com

Top
#2372254 - 09/17/17 01:46 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: Paul_Fancsali]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
nos 273-340 dual points 3 sets
#2084077 $30 mailed
cowgerwilliam035@gmail.com


Attachments
340 001.JPG

340 002.JPG

340 003.JPG



Top
#2372386 - 09/17/17 07:23 PM 1972 340 Engine and Transmission [Re: moparts]
vadartlover Offline
member

Registered: 07/01/04
Posts: 67
Loc: Virginia
Matching 340 engine and transmission along with A Body driveshaft.

Numbers on the block are 2780930-340-6 6-16-71

The VIN looks like: 20233106 (the second digit could also be a B or D, very hard to tell)

Complete minus carb & exhaust manifolds. The engine started and ran fine and has been in my garage every since.

The heads, intake, oil pan, etc have been removed but are included.

$2500 firm. I need the room, garage is rather cramped. Located in Winchester VA.

Please contact via PM here. Thanks MOPARTS!!


Edited by vadartlover (09/19/17 05:25 PM)

Top
#2372397 - 09/17/17 07:55 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
mshred Offline
master

Registered: 04/08/09
Posts: 3330
Loc: Toronto
Selling the smallblock out of my scamp

1991 360 roller block, short fill, full oiling mods to block
Indy 360-2 230 CNC cylinder heads with t&d shaft rockers
Indy intake
Solid roller cam
Forged rotating assembly with top quality parts
10.4:1 compression, runs on pump gas
Still in car, can be heard running, runs hard and havent even pushed it yet. Only trades i am interested in are other mopar engines.

Selling intake to pan...give me what im asking and ill throw in the tti headers too.
Located in Toronto, Ontario. Pickup only, will not ship. Asking $10,000


Edited by mshred (09/17/17 08:38 PM)

Top
#2372627 - 09/18/17 09:36 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
MoPar Offline
super stock

Registered: 01/23/03
Posts: 946
318 poly 4 barrel intake manifold $350.00 608-739-4489


Attachments
20170917_144304.jpg

20170917_144311.jpg



Top
#2373285 - 09/19/17 11:30 AM Offy 340/360 intake, mp 484 cam, Mallory dist. [Re: moparts]
cdp Offline
master

Registered: 01/31/03
Posts: 3349
Loc: MO
I have a super clean 5884 Offy aluminum intake, a new, never used MP 284/484 hydraulic cam, and a good used Mallory dual point distributor.

Intake new is $310, can new, is $395 at summit.

Package deal, $375, plus shipping and PayPal.

816 726 45onetwo.


Attachments
20170917_191809.jpg

20170917_192030.jpg

20170917_192046.jpg

20170918_103852.jpg



Top
#2373347 - 09/19/17 01:25 PM W2 hold down bolt kit. MP p5249713. [Re: moparts]
cdp Offline
master

Registered: 01/31/03
Posts: 3349
Loc: MO
New, nos, mp w2 bolt kit. P5249713. From 1995. Larger bolts than stock a-motor and spacers.

$60, shipped in 48 states.

816 726 4512


Attachments
20170919_104938.jpg

20170919_104946.jpg



Top
#2375039 - 09/22/17 12:37 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
crabman173 Offline
master

Registered: 01/01/06
Posts: 3536
Loc: Big Lick , North Carolina
MT VALVE COVERS FOR SMALL BLOCK
EX COND these are getting harder to find
Killer set clean inside--unmolested just need a quick bead blast to be perfect $70 plus UPS dusterdave173@gmail.com


Attachments
covers 001.JPG

Description: 8

covers 002.JPG

Description: 7


_________________________
I have always had a fascination with fast cars at the expense of more normal character development

Top
#2375644 - 09/23/17 06:06 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: crabman173]
Joesixpack Offline
I Live Here

Registered: 01/21/03
Posts: 10688
Loc: APACHE JUNCTION AZ
new windage tray, 318-340-360 4 bolt holes are blank,need to be positioned and drilled.$50
318-340 1970-1971-1972 a,b,e oil pan#294 used,hot tanked,$50'
plus shipping
cowgerwilliam035@gmail.com


Attachments
oilpan 001.JPG

oilpan 003.JPG

oilpan 006.JPG

oilpan 005.JPG




Edited by Joesixpack (09/23/17 08:12 PM)

Top
#2376747 - 09/25/17 07:25 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
82ramIndy493 Offline
pro stock

Registered: 02/09/03
Posts: 1528
Loc: crisfield, maryland 21817
Up for sale is a carb spacer and a carb adapter(from square bore to spread bore). I can sell these together or separate. You pick. I am asking 10 dollars a piece for either separate or 15 dollars for the pair plus shipping. PM me here or message me at samson1156@verizon.net. I am going to clean these before shipping but didn't want to fool with it unless they sell to keep from oxidizing in storage. Thanks and have a great day.


Attachments
DSC04892.JPG

DSC04893.JPG



Top
#2376752 - 09/25/17 07:30 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
82ramIndy493 Offline
pro stock

Registered: 02/09/03
Posts: 1528
Loc: crisfield, maryland 21817
Up for sale is a set of Cal Custom valve covers. These are in good shape with no cracks or mods. They do need a good bead blasting but will clean up good I think after that. Asking 50 dollars plus shipping. PM me here or message me at samson1156@verizon.net


Attachments
DSC04886.JPG

DSC04888.JPG



Top
#2376894 - 09/25/17 10:25 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
mprhound Offline
enthusiast

Registered: 05/19/03
Posts: 382
Loc: Texas
Magnum M1 single plane intake
$275 plus shipping
Call/text 432 213 1502


Attachments
2E059907-1005-4316-8FC6-F703CC4A2B02.jpg



Top
#2377134 - 09/26/17 11:19 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
junkyardmaxie Offline
master

Registered: 08/24/03
Posts: 3451
Loc: OH
brand new comp cam and new seal power solid lifters for 273-318-340-360 engines. cam never been out of box 20-231-4 valve lift 520-529 dur at .050 244-250 sn #xa1152-16 ] new cam and lifters $210 shipped reply to moparraceman@aol.com thanks CAM ONLY $150. LIFTERS $60. BOTH PLUS SHIPPING THANKS

Top
#2378488 - 09/28/17 07:27 PM For Sale - 1970 340 Long Block, Machine Shop Fresh [Re: moparts]
Moparlang Offline
member

Registered: 05/22/05
Posts: 88
Loc: MD
I have a 70 340 Long Block that is machine shop fresh, built by Ritchie Machine in Capitol Heights, MD. Build date is 1-9-70, VIN is 1B112453. I believe this came out of a 1971 Cuda. It has .030 over, Speed Pro forged flat top pistons, moly rings, new Michigan 77 main, rod and cam bearings, new freeze plugs, etc. Mopar Performance 268/272 450/455 hydraulic cam and lifters. It has "J" heads, 3 angle valve job, new bronze guides and hardened exhaust seats. New mopar oil pump/strainer and a true roller timing chain. Timing cover, oil pan, 90 degree oil filter adapter and balancer are installed. Engine has been primed using Joe Gibbs Racing break in oil, and is primered in high temp epoxy primer. Would need intake and exhaust manifolds, valve covers, and pulleys, etc. I'm located in Waldorf, Md. I'm asking $4,200.00. Make offer. PM me for more info or photos.
Thanks Moparts!!!
https://photos.google.com/archive/photo/AF1QipNl-AVNM_7I1anoGxxCNyn0CW1TYzixnyj8LMRs
https://photos.google.com/archive/photo/AF1QipM5c03NTyujHHshZIbpPbF7R3KDMmhIU0mPONKE
https://photos.google.com/archive/photo/AF1QipNKVz-GG7r-aNYiJuRc43mHpKXT5PdmwhbK3LpV


Edited by Moparlang (09/29/17 02:58 PM)
_________________________
The "mailman's son" Bad mailman!!

Top
#2378817 - 09/29/17 11:25 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
1980volare Offline
My man card has just been revoked.

Registered: 10/13/10
Posts: 502
Loc: Dayton, OH
Late 360 block, 3/4 fill 408ci
Scat forged 4" crank.
Hughes girdle/arp mains.
Scat H beam rods.
Cp pistons 11.0:1 compression.
Cometic head gaskets.
Edelbrock performer cylinder heads.
Mancini 1.5 roller rockers
Arp headstuds
Hughes fabricated aluminum valve covers
Super victor intake.
Msd pro billet distributor
Ati super dampener.
Hughes solid flat tappet cam(specd for boost)
Aluminum deep oil pan, I think it's a steffs
High volume oil pump.

Still in car and can hear run before it's pulled.


Email me at sport3519@aol.com


$5000, and you absolutely can't build it for near that.


Edited by 1980volare (09/29/17 11:27 AM)

Top
Page 1 of 5 1 2 3 4 5 >

Advertisement
Sponsored Link
Forum Stats
24,901 Registered Members
32 Forums
184,302 Topics
2,135,368 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Go Astros
by stumpy
10/21/17 11:42 PM
Look who came over for Mopar parts today
by AndyF
10/21/17 09:16 PM
1968 hemi engine for a bee
by dynotune440
10/21/17 09:03 PM
Eastwood Tig200 Digital
by Leigh
10/21/17 08:36 PM