Page 2 of 5 < 1 2 3 4 5 >
Topic Options
#2334433 - 07/09/17 10:14 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: TheBlackRose]
beaver77 Offline
member

Registered: 09/02/09
Posts: 48
Loc: Iowa
Dodge 318 and 904 trans good running engine has some oil leaks can hear run preferlocal pickup trans works good to 250.00 obo or trade for any complete big block engine
Joshtoland66@hotmail.com

Top
#2334645 - 07/10/17 10:30 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
Mopar Roller Cam Shaft CHRY 273-360
Part# 20-000-13
Valve Adj- 0.25
Gross lobe lift- .682
020 Tappet lift- 305/311
$275

pm here
or contact Mark @
336-595-2000
336-399-7262

[img:center][/img]
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2335591 - 07/11/17 09:05 PM 1968 318 and 904 trans [Re: moparts]
moparguy1941 Offline
member

Registered: 01/13/13
Posts: 6
Loc: Crystal Lake, Illlinois
1968 318 with 904 trans. Running engine with edelbrock performer intake and carter carb. Bought for my dart project but going with 340 instead. Located in crystal lake, Illinois. Asking $550. Contact at hotrod1941@att.net

Top
#2335862 - 07/12/17 10:50 AM Re: 1968 318 and 904 trans [Re: moparts]
Telvis Offline
mopar

Registered: 09/24/13
Posts: 464
Loc: KY
I am relocating in 3 weeks and have some things I can't take with me. I have a 318 that has less than 3k miles on it. It was a Jasper long block and I put a 340 cam, edelbrock intake and Holley 650 4bbl carb on it. I had it in my challenger one summer the swapped it for a 340. It's been sitting on an. Engine stand for about 3 years. It's essentially a new motor. I want to see it go to someone who needs it. Ready to drop in your car. $500 or best offer. Must pick up in Lancaster, ky. I also have a nice 904 trans too. $50.

Pm me or call me at 8594204006. Tim


Edited by Telvis (07/12/17 10:51 AM)
_________________________
That's King Weenie to you!

Top
#2336913 - 07/14/17 12:46 PM Edelbrock Performer Intake 3776 $100 plus shipping [Re: moparts]
Adam71Charger Offline
pro stock

Registered: 06/01/13
Posts: 1460
Loc: Tacoma, Washington USA
EDIT: $100 plus shipping

4 barrel aluminum intake for 318/360. Edelbrock # 3776 with the EGR crossover. It is identical to the 2176 performer, just has provisions for an egr valve that can be blocked if desired. It actually costs more than the 2176 and is a tad lighter.

It can be used in 3 ways:

The egr passage itself can be used or blocked off with intake gaskets that have no hole for egr.

Or, block the egr mount only on top of the intake if you want the benefit of faster warm up but no egr.

Or, dont block either and use an EGR valve.

It is $305 new, Im selling locally for $150, but I will sell for $100 plus shipping to moparts member. It has a water neck on it as well.

Its pretty light so I dont think shipping will be to much, probably around 18 to 35 bucks UPS. If you have a shipping account somewhere and you can do it cheaper then Ill glady package it and send you the dimensions and weight and you can email me a shipping label. Whatever's clever. I live in tacoma wa, and Im near usps, ups, and fedex

I do ask that we use the send money option in paypal so I dont get hit with a fee, unless you want to pay the fee for me. call or text me 253 691 4880 or pm me here at moparts

Pics:

https://www.amazon.com/photos/share/XW52HQ45tzMcdyIsJatQeCNrmr72uWEO8Ly132bTH4L

https://www.amazon.com/photos/share/Jy80U4A2xSJNnC27JupqLdmKDX4UsT1IYKnM0rkz73y

https://www.amazon.com/photos/share/oGMKOhkbYV8ovTSqdGM5SJXrP2WPiQU9FxGTgRKlBqU


Edited by Adam71Charger (07/14/17 04:42 PM)

Top
#2338916 - 07/18/17 08:15 AM Re: [Re: Adam71Charger]
chrisnben Offline
super stock

Registered: 11/16/03
Posts: 946
Loc: Madison, Wisconsin
Couple LA 318, 340, 360 sale parts:

90 degree oil filter adapter. $95 shipped

LA Holley Street dominator intake manifold. Very clean, no issues. $125 shipped

PM me here for details, thanks!
_________________________
'70 Cuda "Badfish 2"- in the works

Home of MoPar University- We school 'em one at a time!!

Top
#2339344 - 07/18/17 07:11 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
dart4forte Offline
I Live Here

Registered: 01/31/03
Posts: 13690
Loc: Mesa, Arizona
Carter/Webber Competition Series Carb, list 9636. This the performance replacement for 340/383. This came off a running car

$125 plus $18.95 shipping


Mesa, AZ


Attachments
IMG_0208.JPG



Top
#2341735 - 07/22/17 09:25 PM factory Intake 273 318 340 360 [Re: dart4forte]
davesmopars Offline
master

Registered: 08/01/04
Posts: 2713
Loc: cheshire, ct
factory Intake 273 318 340 360
and a couple of aluminum
30.00 and up plus shipping
factory
3512100 - 71 340 110.00
3671918 - 72 73 340 50.00
3698434 - 74 360 50.00
3671918 - 72 73 340 50.00
3462848 - 70 340 120.00
2806301 - 68 69 383 80.00
2806301 - 68 69 383 80.00
3830733 - 74 76 440 40.00
3698444 - 73 440 40.00
3698444 - 73 440 40.00
2806178 - 67 68 69 440 90.00
2206000 - 62 63 64 65 66 413 426 440 90.00

aluminum
Torker 440 professionally ported real nice work 150.00
Weiand 440 tunnel ram with 2 660center squirters air cleaners and linkage 750.00
edelbrock db4b 383 150.00 one carb hole enlarged
edelbrock LD340 center performance mod done 350.00
mopar M1 w2 intake 250.00
edelbrock victor w2 intake 250.00
offenhauser early 273 intake 150.00
Weiand Say why And - 440 413 426 175.00


Attachments
fullsizeoutput_1a2e.jpeg

fullsizeoutput_1a2e.jpeg




Edited by davesmopars (07/24/17 12:20 PM)

Top
#2341861 - 07/23/17 08:24 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
JudyLuvsBees Offline
enthusiast

Registered: 06/09/11
Posts: 279
Loc: New York
I have two 340 short block assemblies both were rebuilt at one time, both should still run, both are .030 over w/ L2316 TRW pistons, both have miles on them but no cylinder wall wear, both have a steel crank, good oil pans,pick up screens and windage trays.
The red one is a 1970 it came with matching X heads aluminum intake and valve covers. The blue one is a 72 model year, casting date was 9/71 . Pricing...lets start here $900 For each short block and the x heads intake and valve covers are extra.
I also have a 73 340 block that has been magnafluxed and cleaned, never bored out, for $500 and same on another that has pitting in two cylinder walls for $250. Make an offer


Attachments
20160715_134327.jpg

20170723_083529.jpg

20170723_083529.jpg




Edited by JudyLuvsBees (07/23/17 08:43 AM)

Top
#2342476 - 07/24/17 01:50 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: JudyLuvsBees]
Tooldude Offline
mopar

Registered: 01/23/09
Posts: 490
Loc: So Cal
New 408 engine from summit $4500.00
Has gone to the dark side installing
6.4 hemi.
Call or text David at 805.276.8133
or Mark 818.425.3967


Attachments
IMG_3832.JPG




Edited by Tooldude (07/24/17 01:54 PM)

Top
#2342549 - 07/24/17 03:22 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
Bad340fish Offline
master

Registered: 01/20/03
Posts: 5273
Loc: Tulsa OK
I have a July 1969 340 block for sale. The block has been bored .020 over but has yet to be honed, hone it to fit your pistons. The block has been vat cleaned, and line honed.

I have had this block for a long time, I have done my best to keep it clean and rust free. It does have some light surface rust on the main saddles and in the bores. Nothing that will cause a problem. It has to be honed anyway to fit your piston clearance specs.

Item is located in Tulsa Oklahoma and I am willing to meet in a reasonable distance or I can pallet and ship. I will not charge anything to palletize as long as the buyer arranges pickup at my work(commercial location easy pickup).

This link will take you to an amazon gallery with 5 photos. PM me here or Email at Clamb12 at gmail dot com.

$550

https://www.amazon.com/photos/share/QhMQ3NYwHPhWt9cBVlFYaC7c0ECIGjZ1SS1nXvBtb9X

SOLD Thank you


Edited by Bad340fish (08/24/17 08:54 PM)
_________________________
68 Barracuda Formula S 340

Top
#2343287 - 07/25/17 07:42 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
challenger6pack Offline
mopar

Registered: 04/28/03
Posts: 540
Loc: USA
90 degree oil filter adapter. Needs cleaned.The washer under the boot is missing. I'm asking $50 + actual shipping costs from south Florida. Paypal add 3%. I can be reached by PM. Thanks.

Top
#2343748 - 07/26/17 02:22 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
67-68 A body Bell Housing Part # 081
$125

Located in Walkertown NC
(outside Winston Salem NC)

PM here or contact Mark
Office 336-595-2000
cell 336-399-7262
[img:center]http://[/img]
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2343750 - 07/26/17 02:26 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
64-66 A Body Bell Housing Part# 523

$125

Located in Walkertown NC
(outside Winston Salem NC)

PM here or contact Mark
(336)595-2000 M-F 9-5 pm
(336)399-7262 after hours


[img:center]http://[/img]
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2343836 - 07/26/17 04:53 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
RapidRobert Offline
Circle Track

Registered: 11/20/03
Posts: 32530
Loc: Lincoln Nebraska
eddy 1406 600 CFM. worked fine when car was totalled a year or so ago & worked fine on an engine breakin a few months ago. $199 + the ride. EDIT better pic added


Attachments
SAM_0764.JPG

SAM_0765.JPG




Edited by RapidRobert (07/26/17 05:14 PM)
_________________________
live every 24 hour block of time like it's your last day on earth

Top
#2343922 - 07/26/17 07:43 PM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
budman1965 Offline
super stock

Registered: 08/02/05
Posts: 711
Loc: Edison, NJ 08817
Set of used Hooker small block Super Comp headers. Part # 5115. These fit B and E body cars 1966 thru 1977. 1 3/4" tubes by 34" long. These were on the car only a short time and then removed and stored in the garage for many years. Tubes are strong with surface rust. The third picture shows a small dent in the lower tube. Rest are straight with no dents. SOLD! Contact Bud 732-287-0982 or Kramden426@aol.com. Will be at MOPARS at Englishtown August 26 and 27


Attachments
sbhook1.JPG

sbhook2.JPG

sbhook3.JPG




Edited by budman1965 (08/29/17 08:05 PM)

Top
#2344190 - 07/27/17 09:32 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
Very rare 1971 340 SIX PACK set up off of a Mr. Norms Grand Spaulding Dodge GSS Demon $2500.00 (708)288-2879 Scott


Attachments
parts 3-28-17 003.JPG

parts 3-28-17 004.JPG

parts 3-28-17 005.JPG



Top
#2344320 - 07/27/17 11:57 AM Re: For Sale - Small Block Engine - 3rd Quarter [Re: moparts]
dsd70bee Offline
I Live Here

Registered: 08/24/03
Posts: 13246
Loc: oak park, il.
Vintage Edelbrock Poly 318 tri-power setup, has Ford carbs, The intake is in nice used condition, the carbs are not as nice $850.00 for the setup (708) 288-2879 Scott


Attachments
parts 7-25-17 005.JPG

parts 7-25-17 004.JPG

parts 7-25-17 002.JPG



Top
#2344897 - 07/28/17 02:07 PM 1971 340 carb 4973 [Re: dsd70bee]
davesmopars Offline
master

Registered: 08/01/04
Posts: 2713
Loc: cheshire, ct
1971 340 carb 4973
In good shape
everything moves and turns one air bleed screw broken off
48 states a little more else where
pm me here

****sold****


Attachments
IMG_7321.JPG

IMG_7314.JPG




Edited by davesmopars (08/07/17 05:50 PM)

Top
#2345260 - 07/29/17 11:47 AM W2 & W5 Harland Sharp Roller Rocker Arm Kit-New [Re: davesmopars]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
For sale is a new set of small block Mopar Harland Sharp aluminum roller rocker arms, shafts and blocks for the W2 and W5 Mopar Performance cylinder heads. Intake and exhaust rockers are 1.5 All rockers, shafts and blocks are new. These rockers can be used on W2 heads with milled pedistals and W5 small block Mopar cylinder heads.
Part number S70025W2k.

Description from the HS site and some links are below.

* Needle bearing allow for more oil flow to the rockers.
* Oil restrictors may be necessary to maintain oil pressure.
* Rockers are designed for big lift cams requiring .100 to .150 taller valves.
* Rocker shafts are drilled to allow for 3/8 mounting hardware.
* Rocker spring clearance is limited to 1.500 if more spring clearance is
required, contact our customer service department to discuss your options.
* W2/W5 Race kits come with .180 offset shafts & stands.
Instructions
Harland Sharp needle bearing, single shaft mount, rockers for Small Block
Chrysler are like no other on the market. The only shaft rocker of this style to feature heavy duty needle bearing fulcrums matched with specially heat treated, heavy wall, rocker shafts. Harland Sharp Mopar kits are designed for extreme applications with valve springs up to 1.500 diameter and .900 lift cams. The
7/16-20 x 5/16 ball adjusters are designed for use with the factory style pushrods, length to be determined after you have rockers installed. Harland Sharp SB Mopar kits require taller valves. Approximately .100-.150 are necessary for correct geometry but sometime lash caps can be used. Kits include rocker arms, shafts, spacers, rocker stands, adjusters and nuts. See our instruction link for replacement and service parts #s.

New price for kit including rockers, shafts and blocks is $1,188 at summit. I will sell my new set for $950 shipped in the lower 48 states. Feel free to contact me to discuss.

Email procketrichard@hotmail.com for more information and pictures.


Attachments
P1020310.JPG

P1020321.JPG



Top
Page 2 of 5 < 1 2 3 4 5 >

Advertisement
Sponsored Link
Forum Stats
24,901 Registered Members
32 Forums
184,303 Topics
2,135,391 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Replacement area search for rusted fender
by Billy
10/22/17 01:33 AM
Firewall grommet hole for tachometer
by 340clone
10/22/17 12:28 AM
Go Astros
by stumpy
10/21/17 11:42 PM
Look who came over for Mopar parts today
by AndyF
10/21/17 09:16 PM