Page 1 of 5 1 2 3 4 5 >
Topic Options
#2329599 - 07/01/17 09:23 AM Mopar Transmission For Sale - 3rd Quarter
moparts Offline


Registered: 01/19/03
Posts: 13760
Loc: Norwich CT USA
up

Top
#2329602 - 07/01/17 09:25 AM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
64dodge572 Offline
master

Registered: 01/19/03
Posts: 4263
Loc: Ohio
BREWER’S PERFORMANCE, INC, Chrysler 4-speed transmission and parts specialists.

THE MOST COMPREHENSIVE, UP-TO-DATE WEBSITE FOR ALL YOUR 4-SPEED RELATED NEEDS:

www.brewersperformance.com

NEW: Hurst licensed pistol grip shifter, fits 2009-up Dodge Challenger 6 speed, including the new Hellcat. Fits the factory shifter mechanism, carbon fiber composite grips installed, OE woodgrain grips available as well. Shifter can be modified for shorter throw, by cutting off the bottom mounting screw/hole. $249.95 + shipping

http://www.brewersperformance.com/proddetail.asp?prod=PG-CHALL-6


NEW: Cast iron bearing retainer for 1968-72 18 spline transmissions with 308 front bearing, 4.805" outside diameter, 4.16" bolt circle, replaces cast #C97621/2801892 original retainers, and Mopar Performance P4529697. Gasket and seal included.

http://www.brewersperformance.com/proddetail.asp?prod=BR-621C


NEW: Pistol grip shifter, fits new Dodge Challenger/Charger automatics (and all LX platform cars). Fits the factory shifter mechanism, carbon fiber composite grips installed, OE woodgrain grips available as well. $149.95 + shipping

http://www.brewersperformance.com/proddetail.asp?prod=PG112


VISIT OUR NEW RESTORATION PARTS SECTION, SAME GREAT SERVICE AS OUR 4-SPEED PARTS:

http://brewersperformance.com/store.asp


WE BUY 4-SPEED TRANMISSIONS & PARTS

NEW LOWER PRICE--Rebuilt OE factory Hurst shifter mechanisms from $149.95

NEW PARTS—We now stock all service parts for Hurst Shifters, see our website:

http://brewersperformance.com/products.asp?cat=132


We are the manufactures of the following parts:

Reproduction 1968-69 Console shift handles for A & B body cars from $240.55

1970 Column/reverse interlock linkage kits for B-body big block and E-body big/small block cars $279.95

Correct 1970 B-body console boot with rectangular opening for pistol grip shifter $89.95

New Big Block bellhousings, heat treated aluminum $329.95, steel dust covers $99.95

67-76 A-body and 66-74 B & E body ballstud frame brackets $39.95 ea

Torque shafts (Z-bars) for all popular A B & E body cars $89.95 ea

A-body big block clutch linkage kits, Hydraulic slave kits also.

Clutch pedal to torque shaft rods A, B & E bodies $59.95

Clutch pedal over center spings $49.95

Clutch pedal over center spring retention pins $19.95

Small block 10.5” bellhousing starter seal $39.95

Big block 10.5” & 11.0” starter shims/seals $12.95

Clutch pedal support firewall stud brackets for 66-74 B & E bodies $19.95 ea

Shifter linkage rod sets for A B & E body cars $124.95-$149.95 set

Transmission linkage operating levers for A B & E bodies $49.95-$56.95 set

Billet steel bearing retainers for 18 spline 4-speeds $129.95

Billet aluminum shifter mounting plates for A, B & E bodies, with all hardware $59.95

Clutch fork pivot brackets $19.95-$29.95

Synchronizer strut keys for 68-9 4-speeds $10.95 ea

Hurst shifter mechanisms to retain your stock Inland shift lever $299.95

Transmission side cover wiring clips, retains backup light wiring $8.95 pair

Conversion torque shaft kits for 10.5” small block bellhousings into 1963-66 A-body cars

We also stock:


New Hurst shifter mechanisms from $219.95

Bearing and seal kits from $99.95

Synchro rings $49.95 set/4

Restored factory Hurst shifter levers from $249.95

New pistol grips from $218.03, lenses, grips & bezels available

Shifter boots from $59.95

Shifter boot bezels from $29.95

Reverse indicator lamps $89.95, wiring harnesses from $29.95

Woodgrain shifter ball $39.95

Rebuilt transmissions from $1099.95

Polyurethane transmission mounts from $59.95

Speedometer cables from $39.95, speedometer pinion gears from $19.95

Torque shaft service kits from $59.95

New flywheels from $199.95, cast crank applications available

Bellhousings for all applications

Centerforce and McLeod clutch packages from $332.07

From one part to complete 4-speed conversion packages, we stock it all! Same day shipping on orders received by 2PM.

We accept Visa/MasterCard/Discover.

BREWER’S PERFORMANCE, INC.
10510 State Route 571
Laura, Ohio 45337

Phone:937-947-4416 or 937-698-4259 9am-5pm Monday-Friday
Fax:937-947-4419 24-7


Attachments
conversion pic FOR MOPARTS.JPG



Top
#2329705 - 07/01/17 11:54 AM Small Block QuickTime Bellhousing - New [Re: 64dodge572]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
For sale is a new QuickTime SFI approved bellhousing to mate small blocks to the new process 3 speed or 4 speed (A833) transmissions. Part number is RM-6072. The bellhousing includes the block plate, hardware and adapter ring to allow use of the 4.35” bearing retainer to the 4.8” hole in the bellhousing. If your transmission has the 4.8” bearing retainer then no adapter ring needs to be used.

Some information for the Summitracing site

SFI-Approved: Yes
Safety Rating: SFI 6.1
Bellhousing Depth (in): 7.400 in.
Bellhousing Material: Steel
Bellhousing Finish: Black
Notes: Uses 130-tooth flywheel and no larger than 10.5 in.clutch. Transmission bore is universal 4.807”

QuickTime bellhousings are designed for Circle Track, strip, and street applications. Built from high-grade steel, the cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles. They offer proven performance and are built right here in the USA. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.

Summits price is $692. I am selling this new bellhousing for $580 shipped in the lower 48 states.


Attachments
P1040557.JPG

P1040563.JPG



Top
#2329799 - 07/01/17 02:34 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1171
Loc: CT
727, 518 BILLET REAR SERVO KIT

High performance low/reverse billet rear servo kit for a 727, 518, 46RH, and 46RE transmission. The rear servo piston is a 1-piece design that replaces the stock piston, inner spring, piston plug, snap ring, and the after market shim used in performance rebuilds. The piston is CNC machined out of solid billet aluminum so it will not crack like the stock cast aluminum pistons are known for doing. It comes in a kit with a heavy duty stainless steel return spring that will eliminate 1-2 shift overlap, a new seal, and a .075 extra thick retainer made from stainless steel that will not bend around the retaining ring and pop out of the case like the factory steel retainers do. This kit fits 67 and newer 727, 518, 618, 46RH, and 46RE transmissions. I also have a kit that fits the early 62-66 727’s. The price for either rear kit is $75.00.

MADE IN THE USA!!!

There is a $8.00 shipping charge per order. If you have any questions, or would like to place an order, please email me at mrrandyj@aol.com Thanks!!!


Attachments
rearkit.jpg



Top
#2329800 - 07/01/17 02:35 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: mrrandyj]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1171
Loc: CT
727-48RE DUAL RING FRONT BILLET SERVO KIT

Dual ring billet front servo kits for 727, 518, 618, 46RH, 46RE, 47RH, 47RE, and 48RE transmissions. The front servo is responsible for applying the front band during the 1-2 shift. This servo is based off of the highly desired 71 and earlier Chrysler “small pin” servo that is ideal for use in performance transmissions, only this one is much better. The piston and cover are CNC machined out of solid 6061 billet aluminum and the shaft is CNC machined from prehardened 4140 steel. There are 2 return springs custom made out of stainless steel that will help eliminate the 2-3 shift overlap that these transmissions are known for. There is a custom made metal gapless sealing ring that seals the cover to the case, and also a o-ring in the cover that seals it to the shaft. The o-ring and the gapless ring work together to eliminate internal leakage and allows more oil get to 3rd gear where it is needed most. The piston has 4 total sealing rings, doubling the sealing capacity of the original Chrysler servos. This is a ready to install kit, all the sealing rings and springs are included. The price for this kit is $125.00 plus $8.00 for shipping.

100% MADE IN THE USA

If you have any questions or to place an order my email address is mrrandyj@aol.com


Attachments
Moparts assembled.jpg

Moparts all parts layed out.jpg



Top
#2329803 - 07/01/17 02:37 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: mrrandyj]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1171
Loc: CT
BILLET DUAL RING ACCUMULATORS

These will fit just about any torqueflite transmission including the 727, 904, 998, 999, 500, 518, 618, 42RH, 42RE, 46RH, 46RE, 47RE, and 48RE, almost every rear wheel drive transmission from 1962 on up to the 2007 48RE Cummins Turbo Diesel overdrive transmission. These are a great upgrade for all the 727s and 904s and are also perfect for replacing the plastic accumulator that Chrysler switched to in the late 80s. The plastic accumulators are known for cracking and causing problems in performance transmissions. I have done these 2 different ways: First is an exact stock replacement, this one will accept all the stock springs whether they go between the case and the piston or the piston and the valve body. These are perfect for the turbo diesel guys that have tighter aftermarket torque converters, or for the person doing a stock type rebuild on a gas transmission. Second is with a built in blocker rod that will stop the accumulator from moving in the bore and firm up shifts. No need to cut down round stock and make a blocker rod anymore, I did it for you. Comes with all 4 sealing rings. The price on these are $45.00 each. There is also a $8.00 shipping and handling charge per order.
These are 100% Made in the USA. If you have any questions or want to place an order email mrrandyj@aol.com Thanks for looking!!!


Attachments
20150415_180328.jpg

20150415_182348.jpg



Top
#2329804 - 07/01/17 02:38 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: mrrandyj]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1171
Loc: CT
904 BILLET REAR SERVO KIT

High performance low/reverse billet rear servo kit for a 1967 and newer 904, 998, 999, 500, 42RH, 42RE, 44RH, 44RE Dodge Plymouth Chrysler Jeep or AMC transmission. This rear servo kit features a redesigned 1-piece piston which replaces the stock piston, inner spring, piston plug, snap ring, and the after market shim used in performance rebuilds. It is CNC machined out of solid billet aluminum so it will not crack like the stock cast aluminum pistons are known for doing. You will also get much less internal leakage with the solid 1 piece piston compared to the stock assembly, that means more holding power for the rear band. Included in this kit is the piston, a heavy duty return spring that will help eliminate the 1-2 shift overlap, a new seal, and a .075” extra thick stainless steel retainer that will not bend around the retaining ring and pop out of the case like the factory steel retainers do. This is a complete ready to install kit, no extra parts are needed and it is 100% Made in the USA. The price for this kit is $75.00. There is also a $8.00 per order shipping charge.

If you have any questions, or would like to place an order, please email me at mrrandyj@aol.com Thanks!!!


Attachments
904 Rear Servo Kit Assembled.jpg



Top
#2329811 - 07/01/17 02:48 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: mrrandyj]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1171
Loc: CT
727-48RE FRONT BAND STRUTS AND BILLET BAND ANCHORS

Heavy duty, double thick, billet steel front band strut and billet front band anchor for a Dodge, Plymouth, Chrysler, or AMC 727, 518, 618, 46RH, 46RE, 47RH, 47RE, and 48RE transmissions. This fits from the 1962 727 transmission, all the way up through the 2007 ½ Cummins Turbo Diesel 48RE, and everything in between. The OEM Chrysler front band struts are prone to bending, and the OEM band anchors are known for breaking in high performance and heavy duty applications. The band strut is CNC machined from 1/4” thick steel, which is twice as thick as the factory strut and it is black oxide coated for corrosion protection. The band anchor is also CNC machined from billet steel. Both are made in the USA. The price is $25.00 each for the strut, and $28.00 each for the anchor and includes shipping anywhere in the USA.
Email mrrandyj@aol.com



Attachments
20170419_173122.jpg

20170330_184752.jpg



Top
#2329893 - 07/01/17 05:52 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
6PAX Offline
master

Registered: 01/20/03
Posts: 4433
Loc: Metro Detroit
A-body big block 4-speed parts: Included are a 4-speed bell housing #2468372, bell housing inspection cover, big block clutch fork, big block A-body z-bar, new big block A-body z-bar bell housing and frame ball pivots, new ball stud seal, 2 new clutch linkage washers and a new throw-out bearing as shown in the picture. I have had the bell housing, inspection cover and clutch fork media blasted. The bell housing and clutch fork are primed. The inspection cover has been painted gloss black. I have also blasted and primed the z-bar since the photo was taken. $750 for everything. Selling only as a package. I would prefer not to ship but can deliver to the Mopar Nats with a $100 non-refundable deposit. gt340 at yahoo.com


Attachments
MVC-027S.JPG



Top
#2329946 - 07/01/17 07:48 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
Goat330 Offline
enthusiast

Registered: 11/22/07
Posts: 320
Loc: Randolph, Ohio--N.E. Ohio
65 big block 727 torqueflite,the one with the rear slip spline.It was rebuilt about 5 years ago and has not been used since then.New solid bands,clutches,all seals and paper are new,also has the later model input splines for the converter.IT wouldn't hurt to freshin the bands and clutchs in some tranny fluid before use.Also has a stock 65 valvebody with the correct rooster comb.I can supply a different VB if that wont work in your car.$700 and local pick-up only.Bill at wmemore@aol.com or PM,Thanks for the free ads Moparts.


Edited by Goat330 (08/08/17 09:19 AM)

Top
#2329947 - 07/01/17 07:50 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
Goat330 Offline
enthusiast

Registered: 11/22/07
Posts: 320
Loc: Randolph, Ohio--N.E. Ohio
1992 A-518 O/D tranny.Was rebuilt many years ago for a forgotten project and put on shelf and never used.It has new solid bands,raybestos clutches,new seals. It should be pulled apart and re-lubed inside before it's used and it is a lock-up trans.,local pick-up only.Bill at wmemore@aol.com or PM,Thanks for the ads Moparts!SOLD


Edited by Goat330 (07/10/17 03:22 AM)

Top
#2329948 - 07/01/17 07:51 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
Goat330 Offline
enthusiast

Registered: 11/22/07
Posts: 320
Loc: Randolph, Ohio--N.E. Ohio
I have several slant 6 904s from early 70s darts laying around $20 each.Also have a couple of small block 727s for cores $30 each.Local pick-up only,Bill at wmemore@aol.com or PM,Thanks for the ads Moparts!

Top
#2330251 - 07/02/17 03:28 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
T2R9 Online   content
top fuel

Registered: 08/12/07
Posts: 2293
Loc: Conway, SC
67 valve body with TF2 shift kit. Excellent working condition. I removed it from my 72 Charger for the correct one. $75 delivered to Carlisle.

Moroso 42080 Tig welded aluminum deep pan. Excellent condition with all hardware. These are $221 on Summit. $125 delivered to Carlisle. PM is fine.


Attachments
IMG_0786.JPG

IMG_0781.JPG

IMG_0782.JPG


_________________________
1973 Charger SE 400 HP
1978 Power Wagon 440 club cab, skylite
1995 Dakota Sport 5.2 5-speed
2016 Challenger R/T Shaker Plum Crazy

Top
#2330695 - 07/03/17 12:14 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
Slap Shot Offline
pro stock

Registered: 11/03/03
Posts: 1582
Loc: Dover,Pa
A body 23 spline 4 speed transmission $500 717 577-0270


Attachments
00909_hTjPeNm4f11_1200x900.jpg

00I0I_79gUS50ntUo_1200x900.jpg



Top
#2331381 - 07/04/17 12:31 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
slantzilla Offline
I Live Here

Registered: 01/24/03
Posts: 17776
Loc: Park Forest, IL
8" PTC race converter for 904. Stalled 3400 behind my 240" junk on the footbrake. Few passes, no street miles. Can text pics on request. $500 OBO plus the ride. slantzilla@excite.com or PM here.

Thanks for the ad Tom!
_________________________
"Everybody funny, now you funny too."

Top
#2331497 - 07/04/17 04:18 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
chooch Offline


Registered: 06/11/14
Posts: 134
Loc: pa
rebuilt 23 spline trans with all new parts from brewers 65 case with 70 up B & E body tail housing $1000 bo + shg

64-65 bell housing 10.5" 2468370 very clean in great shape with no cracks or messed up threads $350 +shg


can deliver to Carlisle with deposit will trade for max wedge parts


Attachments
357445-375f65aa5ec35eb640a724579b358546.jpg

357447-dd6b5dab7dc119432128ef1f51d52efd.jpg




Edited by chooch (07/04/17 04:19 PM)
_________________________
1974 pinto
1978 pacer
1987 yugo

Top
#2331684 - 07/04/17 10:33 PM Re: Mopar Transmission For Sale - 3rd Quarter [Re: chooch]
Azzkikrcuda Offline
pro stock

Registered: 01/20/03
Posts: 1587
Loc: North Dakota
Turbo Action 10" converter for 727 Small and Bigblock. PN# 17805S Medium. Was in a 70 Challenger 496cid with 4.10 gear, around 10,000 street miles on it. Worked good, changed combo. $375+shipping PM me here if interested
Specs and info http://www.turboaction.com/s800.html


Attachments
convertor 001.JPG


_________________________
The only Carbs I care about are under the hood!

Top
#2332377 - 07/06/17 08:18 AM Re: Mopar Transmission For Sale - 3rd Quarter [Re: Azzkikrcuda]
MI Mopar Works Offline
mopar

Registered: 12/24/15
Posts: 415
Loc: MI
This is a 10 inch torque converter for mopars with 727 Torqueflite transmissions. This is a custom built piece from Ultimate Converter. It has very little use. 5 passes and some light street time. It is in excellent functioning condition, just too tight for my combo. It flashes between 3200-3500 RPMs. Original cost was almost $1000. My loss is your gain. Asking $450 OBO. Call Dave (734)624-2212 or pm me here.


Attachments
converter2.jpg

converter1.jpg


_________________________
MI Mopar Works
Parts Sales
Restoration and detailing of all kinds of mopar hardware
https://www.facebook.com/MIMoparWorks/


Top
#2334022 - 07/09/17 10:03 AM Re: Mopar Transmission For Sale - 3rd Quarter [Re: moparts]
moparjoe360.4 Offline
enthusiast

Registered: 02/04/12
Posts: 256
Loc: Ohio
64-65 Hemi STEEL bellhousing, casting #2463236, all treads look good, we don't have the inspection cover. I'm listing for my dad, pm me here for his contact info or with questions. Asking $1000 OBO but he's negoable


Attachments
IMG_1653.JPG

IMG_1654.JPG

IMG_1655.JPG



Top
#2334246 - 07/09/17 04:21 PM B & M #10238 offset weighted Flex plate [Re: moparts]
jlatessa Offline
super stock

Registered: 08/31/09
Posts: 703
Loc: Ohio
This is the plate, (currently not available) needed for a RB with the big rods.
It is the mate for the offset weighted harmonic balancer on those engines.

It allows you to use any converter and not have to weld compensating weights
for the rods as MOPAR did.

Used, but in very good condition.

$40 plus shipping, (about $15 via USPS Priority Mail Box).

Joe
Four Four Zero- 376-Zero Nine Seven Eight
Or PM me, Thanks

Top
Page 1 of 5 1 2 3 4 5 >

Advertisement
Sponsored Link
Forum Stats
24,900 Registered Members
32 Forums
184,280 Topics
2,135,064 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
east coast members : need hood transported to south dakota
by moparx
10/21/17 09:40 AM
Revisiting the 57 Plymouth
by Mike P
10/21/17 06:25 AM
RIP Gord
by ChryCoGuy
10/21/17 02:16 AM
Thanks to Mopar Muscle and Moparts.
by 383man
10/21/17 01:33 AM