Page 2 of 12 < 1 2 3 4 11 12 >
Topic Options
#2330716 - 07/03/17 01:19 PM Comp Cams Small Block Solid Roller– Used [Re: Scamp408]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
I have a nice Comp Cams solid roller camshaft with dyno time usage only. Lobes look very nice and show little signs of use. Specs are as follows:

Comp Cams part #20-730-9
Comp Cams grind # CRS 310C-R6
Lobe lift 0.418" / 0.425" intake / exhaust
Lift with 1.5 rockers 0.627" / 0.638" intake / exhaust
Advertised duration 310 degrees / 312 degrees intake / exhaust
Duration @ 0.050 lift 276 degrees / 281 degrees intake / exhaust
Lobe Separation Angle 106 degrees
Installed centerline 106 degrees (no ground in advance)

Price is $190 shipped in the lower 48 states. I will ship internationally for the additional cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.


Attachments
P1040581.JPG

P1040582.JPG



Top
#2331039 - 07/03/17 08:13 PM 413 Standard Bore Truck Bare block with caps [Re: Rocket]
64MAX Offline
member

Registered: 01/21/03
Posts: 144
413 truck/motor home block with caps, casting number 2658836, 8-11-69 date; FT 413 & 10 24 on pad; under-bored 426/440 block with thick cylinder walls and external strengthening ribs, sonic numbers available, $500; RB forged crankshaft from this motor, std., $125 Local pick up in Western MA. Possible delivery to Carlisle Best to email me at Malloryc1@roadrunner.com. Thanks for the ad Moparts!

Top
#2331177 - 07/04/17 02:24 AM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
kdsmith07 Offline
pro stock

Registered: 04/15/07
Posts: 1204
Loc: Loganville GA.
used bb crane cam #681561 in nice shape.shows almost no wear.it's a 3 bolt mech.flat tappet dur 304/314 lift 580/600 rpm range 4500-7600.no lifters.95.00 shipped.pm me if interested,thanks


Attachments
DSC06695.JPG

DSC06696.JPG

DSC06697.JPG

DSC06701.JPG



Top
#2331328 - 07/04/17 10:58 AM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
Al_Alguire Offline


Registered: 01/20/03
Posts: 16176
Loc: Rockville MD & Las Vegas
***********SOLD************

For sale RB based Marcella sheet metal intake for a Predator Head. This thing is a work of art!! Was on my 604" Predator headed engine and made 1200+hp. I am having the heads changed up a bit and will need a new intake made so sadly this one needs to go. $1500obo. Thing has never made a pass down the track just been on the dyno a couple times. Why buy the Indy cast intake when you can have this one for just a bit more money. Contact me here via pm, email me at b1valiant@hotmail.com or can call me at 7 0 7 9 8 0 2 1 6 seven


Attachments
IMG_2109.JPG




Edited by Al_Alguire (07/06/17 04:01 PM)
_________________________
"I am not ashamed to confess I am ignorant of what I do not know."

"It's never wrong to do the right thing"

Top
#2331378 - 07/04/17 12:28 PM W2 econo heads [Re: moparts]
killermopar Offline
pro stock

Registered: 03/13/10
Posts: 1308
Loc: Spencer NY
No longer available


Edited by killermopar (07/17/17 07:48 PM)

Top
#2331438 - 07/04/17 02:23 PM Re: W2 econo heads [Re: killermopar]
Dragula Offline


Registered: 05/02/04
Posts: 9978
Loc: Taxes R-US, NY
$25k price drop.

This is the last time the Callies crank can be turned, and so I am lowering the price. Engine is almost back together and you can hear it run as I am putting it back in the car

All aluminum Indy style Hemi parts purchased from BGR. Complete 1250 carb to pan. I currently have it all apart as we have nearly fixed the last remaining issue from last year. This engine makes over 800hp on pump gas and is an absolute street terror.

Last year I did window it after starving #7 rod bearing for oil. The block was professionally repaired and is currently out for a final line hone just to make sure nothing moved. All parts that were hurt were replaced or repaired professionally. Also, the head oiling has been restricted to better limit oil up top and keep oil in the pan to keep from starving any rods.

All good parts, 11.2:1 compression. Heads ported and flowed..all build specs here...Should have it all back together here in a few weeks. Can hear it run in a few weeks as it will back in the car.

All build specs here
http://board.moparts.org/ubbthreads/ubbt...ld-updated.html

Very Streetable:
https://www.youtube.com/watch?v=WYw6RA-k5Bk&t=37s


Attachments
KIMG0106-1.jpg

KIMG0033-1.jpg




Edited by Dragula (08/22/17 09:40 PM)
_________________________
'71 Duster Pump Gas 512RB
https://www.youtube.com/watch?v=Z_XTmRBuvWs (6.19)
https://www.youtube.com/watch?v=gQZGfDBPROM (9.70 at 138.5mph)

'70 Cuda NO Hemi, again
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.31)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

Top
#2331533 - 07/04/17 05:28 PM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
brownout Offline
enthusiast

Registered: 12/20/11
Posts: 255
Loc: ca
Used- indy maxx pump cover $150 shipped
New- 440 source swinging pickup with bulkhead fittings and an fittings $75 shipped

Call or text Cody at 916-494-8888


Attachments
indy.jpg




Edited by brownout (08/14/17 11:49 PM)

Top
#2331534 - 07/04/17 05:29 PM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
brownout Offline
enthusiast

Registered: 12/20/11
Posts: 255
Loc: ca
Used but in like new condition auto meter 3911 tach with shift light and roll bar mount new from summit $280 I will take $200 shipped to you
New in box auto meter 4437 water temp gauge new from summit $80 I will take $65 shipped
Used auto meter oil pressure gauge and sending unit new from summit $95 I will take $ 75 shipped

I will discount price for a package deal.

Call or text Cody at 916-494-8888


Attachments
tach.jpg




Edited by brownout (07/06/17 03:48 PM)

Top
#2331630 - 07/04/17 09:05 PM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
mopacltd Offline
pro stock

Registered: 10/01/03
Posts: 1272
Loc: yarnell,az
RB dual plane Edelbrock performer manifold. Bolted to engine then removed to install six pack set up. $100, plus shipping. Love to post picture, but don't seem to able to figure out how.


Edited by mopacltd (07/06/17 11:12 PM)

Top
#2331891 - 07/05/17 11:42 AM Re: Brand New Quick Fuel 750 SS Carb [Re: moparts]
Cheetah400m Offline
member

Registered: 04/24/16
Posts: 5
Loc: Nebraska
Brand New Quick Fuel 750 Super Street, 750 cfm, 4-Barrel, Down-Leg, Electric Choke, Mechanical Secondary, Dual Inlet. Can provide pictures if interested. $500.

Top
#2332324 - 07/06/17 02:09 AM Re: Brand New Quick Fuel 750 SS Carb [Re: Cheetah400m]
BIGJOE30 Offline
super stock

Registered: 09/01/05
Posts: 714
Loc: Pittsburgh area
Pro Form 950 CFM Carb Like New only 10 passes work amazing, but to small had to go 1000 CFM for my heads
SOLD
Also Weiand Team G Intake 440 Single Plane
$150



Attachments
IMG_1555.JPG




Edited by BIGJOE30 (07/07/17 07:49 PM)

Top
#2332421 - 07/06/17 09:52 AM 15x4 cop car wheels [Re: BIGJOE30]
dodge turbo Offline
mopar

Registered: 09/08/07
Posts: 443
Loc: Dirty Dena, Maryland
These were made by a member on here a while ago
They have been on my truck for several years and im just changing
The look of my truck.

15x4 the wheel has centered back space and clears
Large truck disc brakes. Hardly any wheel weight was needed for balance

$200 obo


Attachments
IMG_0571.JPG

IMG_0572.JPG

IMG_0573.JPG


_________________________
78 Adventurer 150small block turbo'd 360w/Borg S475....smoke'em

Top
#2332459 - 07/06/17 10:55 AM fenderwell hedman hedders [Re: dodge turbo]
sergio Offline
member

Registered: 08/24/16
Posts: 11
Loc: ca
These are for early a body,(66 back)will not fit 67 up.Primaries are 1.88 of, 1.75 id,tubes are 30 /31 inches long to collector,3" collector. Installed but not fired,surface rust but no dings ,like new condition.$450 plus shipping.e mail sergio7140@att.net.Thank you

Top
#2332642 - 07/06/17 03:31 PM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
DudleyPerformanc Offline
member

Registered: 06/20/17
Posts: 81
Loc: North Carolina, USA
New!!
APD Split Dominators
Part# 10175
Wilson Manifold Plates

$2500

Located in Walkertown NC
(Outside Winston Salem NC)

PM here or
Contact Mark
Office (336) 595-2000
Cell (336) 399-7262
[img:center]http://[/img]
_________________________
Mark Dudley Performance and Parts
Walkertown, NC 27051
(336) 399-7262

We offer a complete line of High Performance
Parts, Engines, Transmission and Body needs for
1960-1970's Mopar's from Street to Strip.


Top
#2332778 - 07/06/17 08:35 PM Re: SB Ultradyne cam and lifters [Re: sergio]
rt66jim Offline
master

Registered: 01/19/03
Posts: 3907
Loc: Joplin, Mo
Ultradyne cam and Comp solid lifters NIB. Cam specs: Grind # NFG63F6 Int. dur. @ .050 267 Exh dur. @ .050 267 Gross lift int. .609 Gross lift exh .609
lash .016 int & exh. Lobe separation 106*

$225 + frt

PM me here Jim

Top
#2333693 - 07/08/17 02:52 PM Race headers for sale [Re: rt66jim]
actionange Offline
pro stock

Registered: 04/28/03
Posts: 1512
Loc: anywhere@ anytime
Hooker 2 inch by 38 inch by 3 1/2 inch collector diameter race headers. Fit B and RB engine in 66- 70 B and 70- 74 E body. All tubes are in engine compartment- no inner fender cutting needed. Included are FlowMaster 4-2-1 collectors as well as a set of short collectors and NHRA mandated collector tethers.
You will need to repaint or get ceramic coated
These do not have a flange to bolt on an exhaust system.
$400.00 complete plus shipping from 06492
Contact: actionange1@att.net


Attachments
IMG_2249.jpg

IMG_2247.JPG

IMG_2248.JPG




Edited by actionange (07/08/17 02:54 PM)

Top
#2333855 - 07/08/17 08:39 PM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
OhioMopar Offline
master

Registered: 08/17/03
Posts: 7441
Loc: Mt.Gilead, Ohio
1 pair of used qa-1 single adjustable rear shocks for a B-body. I got a good deal on a set of dual adjustables, so I don't need these anymore. No passes and under 2000 street miles. I can send pics tomorrow.
$250 or best offer.
Pm here or email scatpack_69@yahoo.com or call/text (419)560-25 one six. Can deliver to Carlisle if prepaid.


Attachments
Screenshot_20170704-184701.jpg


_________________________
ISO '69 GTS 340 or '71 Demon 340 project.

Top
#2334767 - 07/10/17 01:31 PM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
Jason B Offline
member

Registered: 05/06/16
Posts: 53
Loc: Mopar
1- turbo action shifter console 25.00

1- Turbo Action Cheetah reverse pattern air shifter with console and hardware- 300.00

1- ultimate 2 tach with data recorder built in. 250.00

1- mopar performance tach drive distributor with matching tach 300.00

1- Turbo action 8" trans brake converter 5800 flash neck has a crack needs to go back for service. 250.00- SOLD

1- complete axle to axle stock eliminator trick of the week B/E body 8 3/4 35 spline rifle drilled Mark Williams axles, spool, Ford housing ends, 1350 yoke machined for drive shaft collar, 4.86 lighted PRO Gear set. $2500.00

1- 742 - 8 3/4 housing with both Mark Williams caps. $250.00

1- 489 Nodular case. $200.00

1- Mark Williams light weight steel spool. $150.00

1- 486 Ring and tapered pinion set that has been REM finished and Cryo. 100.00

1- Pair of W2 heads ported by Jimmy Bell intake flowed 316. Complete valves, countless sets of springs, rockers, push rods, Holley strip Dominator intake matched to the heads, Mopar cast valve covers. Standard deck height. One intake port has a small leak can be repaired easily with expoxy. Complete set $1000.00

1- 4150 950 HP with lots of work was setup for throttle stop will sell with a brand new Super Sucker spacer. $1150.00

1- #1 Stop throttle Stop 4 blade electric. $300.00

1- pair of Stock Eliminator 915 heads and manifold for 72-73 340 with lots of love! Put together 5 years ago. $1000.00

1- .60 over stock 340 block studded and grouted needs a sleeve. $300.00

2- complete sets of RAS ratioed rocker arms with 2 sets of Schubeck lifters. $1200.00

Assorted smalls for the above listed items cranks, valve springs, push rods, oil pans, pistons, call with your needs!! 936 577 1648.

Got a E F G 73/74 Duster with all the tricks under construction. Chromoly cage, S60 Dana with mono leaf Cal-Tracks 512 R.E.M. Finished gear disc brakes, Pro Trans, Parsons and Meyers 360 new with all the latest enhancements car needs finishing body work and assembly. Wheels tires everything! Lost interest asking $25000.00

Complete Super stock 6.1 Drag Pak engine complete current record setting engine built by Parsons and Meyers. $20,000.00 went a 9.46 @143 mph.

1- pair of Stainless Performance Welding merge collectors 1 7/8 primary with 2 1/4 choke and 3" exit. $300.00

1- 72/73 stock eliminator 340 Thermoquad $500.00.

1- fiberglass 70-74 Challenger lift off hood with molded 6pack scoop. New never installed $200.00

1- set of Weld Super Lites 15x12 and 15x4 dual pattern with tires and slicks. Asking $1000.00

THIS IS JUST WHAT WE SEE AT THE MOMENT CALL AND ASK IF YOUR LOOKING FOR SOMETHING NOT LISTED I PROBABLY HAVE IT! Everything located in Huntsville, Texas [b]Message, call or text for pictures
[/b]
936 577 1648
Jason Buckner



Edited by Jason B (07/24/17 10:05 PM)
_________________________
1968 Cuda 440" Edelbrock Victor Head Small Block.

Top
#2334855 - 07/10/17 04:19 PM 1970-1974 Plymouth Cuda Fiberglass Parts [Re: moparts]
CuDa572 Offline
member

Registered: 08/28/13
Posts: 6
Loc: New Mexico
1970-1974 Plymouth Cuda Fiberglass parts for sale listed below.

$1100.00 + shipping for everything

Hood $200.00 + shipping
Front Fenders $130.00/each + shipping
Front Upper Valance $70.00 + shipping
Front Lower Valance $75.00 + shipping
Front Bumper $65.00 + shipping
Drivers and Passenger Doors $120.00/each + shipping
Trunk Lid $70.00 + shipping
Rear Valance $75.00 + shipping
Rear Bumper $112.00 + shipping

I am not sure of the brand of these parts but they look like they could be from unlimited products. These parts were bought new but never installed on a car. They were purchased years ago for a project that was never finished. We purchased the project but decided to go a different route instead. The doors will need some work to get them back straight. The window channels seem to be warped and cracked in some places. I am sure it is fixable to anyone who has experience with fiberglass. Everything else looks to be okay. We are asking $1100.00 for everything plus shipping. We can separate the items if needed. If you buy the whole package, we are willing to deliver within 500 miles of our location (88240) for a fee (Gas money, hotel, etc.)

Email neracer@hotmail.com or pdstr408@gmail.com for any questions or for more pictures.


Attachments
IMG_7405.JPG

IMG_7403.JPG

IMG_7390.JPG

IMG_7401.JPG




Edited by CuDa572 (07/10/17 04:21 PM)

Top
#2335570 - 07/11/17 08:44 PM Re: Race Parts For Sale - 3rd Quarter [Re: Jason B]
pittsburghracer Offline
Slowride

Registered: 02/02/05
Posts: 11749
Loc: PA.
Radiator out of a 1972 (340) Duster that was rebuild years ago by a local radiator shop. This thing works great and is ready for race car cooling or number correct 1972 Duster. Trying to sell local first in PA but will be traveling to Ohio in the near future so delivery to that area may be possible. 325.00 plus delivery. Freeport, PA. 16229 area. PM or jacadamore@gmail.com


http://imgur.com/a/69978

http://imgur.com/mQHQJsl


Edited by pittsburghracer (07/11/17 08:46 PM)
_________________________
1970 Duster
Edelbrock headed 408
6.143@110.89 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
6.004@113.27mph
9.56@137.89

https://flic.kr/p/WjECmg

[img]http://i.imgur.com/Z4SvNU4.jpg?1[/img]



Untitled by John Cadamore, on Flickr





Top
Page 2 of 12 < 1 2 3 4 11 12 >

Advertisement
Sponsored Link
Forum Stats
24,895 Registered Members
32 Forums
184,140 Topics
2,132,952 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
66-70 B Body Trunk Dividers
by 71TA
10/17/17 12:48 AM
Advice on business idea
by SeaninSD
10/17/17 12:31 AM
64 Dodge Pick Up - Leaning Tower of Power
by 65pacecar
10/17/17 12:12 AM
67 Belvedere I
by 65pacecar
10/17/17 12:11 AM