Page 1 of 12 1 2 3 11 12 >
Topic Options
#2329586 - 07/01/17 09:17 AM Race Parts For Sale - 3rd Quarter
moparts Offline


Registered: 01/19/03
Posts: 13759
Loc: Norwich CT USA
up

Top
#2329699 - 07/01/17 11:37 AM Re: Holley 750 Pro Series double pumper carb [Re: moparts]
PHYSIXX Offline
pro stock

Registered: 04/07/04
Posts: 1514
Loc: Edison, New Jersey
SOLD!

I have for sale a used Holley 750 cfm Pro Series double pumper carb, list #80528-2. It works perfectly and has the stock 74 jets in both the primaries and the secondaries. It was recently used on an engine dyno to compare it with a new 750 ProForm carb. There was absolutely no difference in the HP and torque readings.

https://www.summitracing.com/parts/hly-0-80528-1

I would like to get $250 for it plus the shipping.

Edison, NJ
rider1454 at aol.com


Attachments
DSCN4061.JPG

DSCN4062.JPG

DSCN4066.JPG




Edited by PHYSIXX (09/20/17 09:43 AM)

Top
#2329700 - 07/01/17 11:41 AM Re: Hedman Hedders slip on collectors [Re: PHYSIXX]
PHYSIXX Offline
pro stock

Registered: 04/07/04
Posts: 1514
Loc: Edison, New Jersey
SOLD!

I have for sale a pair of Hedman Hedders slip on header collectors that have 1 7/8” primary openings and a 3 ½” collector opening. The Hedman P/N is 14046. The straight part length of these collectors measure 6”. They are in excellent shape and also come with new weld on tabs in case the ones on these collectors are different.

https://www.summitracing.com/parts/hed-14046/overview/

I would like to get $75 for the pair plus the shipping.

Edison, NJ
rider1454 at aol.com


Attachments
DSCN4055.JPG




Edited by PHYSIXX (09/20/17 09:44 AM)

Top
#2329725 - 07/01/17 12:21 PM Isky Adjustable Iron Rocker Arms, Shafts & Hardware - Used [Re: PHYSIXX]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
This is a very nice set of Isky adjustable big block Mopar rocker arms, shafts, spacers and mounting hardware. These were run for a summer and are in great condition with very little wear. The shafts have sonce been cleaned including using a bottle brush on the insides, polishing the outside and installing new shaft end plugs. Rockers and hardware were degreased and inspected. Rockers and shafts show no galling. These are ready to install. Bolts and shaft hold downs are included but not pictured.

Price is $400 shipped in the lower 48 states. . I will ship internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com for more information or pictures.


Attachments
P1040544.JPG

P1040553.JPG



Top
#2329741 - 07/01/17 12:59 PM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
Wookie316 Offline
enthusiast

Registered: 10/21/11
Posts: 226
Loc: Alberta
Big Block items for sale. Message with any questions. Located in Alberta Canada.
Manley head bolts for Indy EZ. Full set. $50
Smith Bros 5/16 ball/cup pushrods. .116 wall. Fit 383/400 block with solid cam and Indy heads. 8.815 EL. $50
Big block Powerbond balancer PB1112ST. Asking $80
Message with any questions. Can determine shipping costs and email photos with an address and email. Thanks Moparts.
_________________________
BARNEY the 71 Plum Superbee. 4100 at the line. 511 low deck Cope 727 with Ultimate converter and a S60 with 4.30's out back! 10.14 @ 133.33 with a 1.42 60 NA and 9.86 @ 136.61 with a 1.38 60 Spray. Pigs do fly!!!

Top
#2329816 - 07/01/17 02:56 PM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1171
Loc: CT
727, 518 BILLET REAR SERVO KIT

High performance low/reverse billet rear servo kit for a 727, 518, 46RH, and 46RE transmission. The rear servo piston is a 1-piece design that replaces the stock piston, inner spring, piston plug, snap ring, and the after market shim used in performance rebuilds. The piston is CNC machined out of solid billet aluminum so it will not crack like the stock cast aluminum pistons are known for doing. It comes in a kit with a heavy duty stainless steel return spring that will eliminate 1-2 shift overlap, a new seal, and a .075 extra thick retainer made from stainless steel that will not bend around the retaining ring and pop out of the case like the factory steel retainers do. This kit fits 67 and newer 727, 518, 618, 46RH, and 46RE transmissions. I also have a kit that fits the early 62-66 727’s. The price for either rear kit is $75.00.

MADE IN THE USA!!!

There is a $8.00 shipping charge per order. If you have any questions, or would like to place an order, please email me at mrrandyj@aol.com Thanks!!!


Attachments
rearkit.jpg



Top
#2329817 - 07/01/17 02:56 PM Re: Race Parts For Sale - 3rd Quarter [Re: mrrandyj]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1171
Loc: CT
727-48RE DUAL RING FRONT BILLET SERVO KIT

Dual ring billet front servo kits for 727, 518, 618, 46RH, 46RE, 47RH, 47RE, and 48RE transmissions. The front servo is responsible for applying the front band during the 1-2 shift. This servo is based off of the highly desired 71 and earlier Chrysler “small pin” servo that is ideal for use in performance transmissions, only this one is much better. The piston and cover are CNC machined out of solid 6061 billet aluminum and the shaft is CNC machined from prehardened 4140 steel. There are 2 return springs custom made out of stainless steel that will help eliminate the 2-3 shift overlap that these transmissions are known for. There is a custom made metal gapless sealing ring that seals the cover to the case, and also a o-ring in the cover that seals it to the shaft. The o-ring and the gapless ring work together to eliminate internal leakage and allows more oil get to 3rd gear where it is needed most. The piston has 4 total sealing rings, doubling the sealing capacity of the original Chrysler servos. This is a ready to install kit, all the sealing rings and springs are included. The price for this kit is $125.00 plus $8.00 for shipping.

100% MADE IN THE USA

If you have any questions or to place an order my email address is mrrandyj@aol.com


Attachments
Moparts assembled.jpg

Moparts all parts layed out.jpg



Top
#2329818 - 07/01/17 02:57 PM Re: Race Parts For Sale - 3rd Quarter [Re: mrrandyj]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1171
Loc: CT
BILLET DUAL RING ACCUMULATORS

These will fit just about any torqueflite transmission including the 727, 904, 998, 999, 500, 518, 618, 42RH, 42RE, 46RH, 46RE, 47RE, and 48RE, almost every rear wheel drive transmission from 1962 on up to the 2007 48RE Cummins Turbo Diesel overdrive transmission. These are a great upgrade for all the 727s and 904s and are also perfect for replacing the plastic accumulator that Chrysler switched to in the late 80s. The plastic accumulators are known for cracking and causing problems in performance transmissions. I have done these 2 different ways: First is an exact stock replacement, this one will accept all the stock springs whether they go between the case and the piston or the piston and the valve body. These are perfect for the turbo diesel guys that have tighter aftermarket torque converters, or for the person doing a stock type rebuild on a gas transmission. Second is with a built in blocker rod that will stop the accumulator from moving in the bore and firm up shifts. No need to cut down round stock and make a blocker rod anymore, I did it for you. Comes with all 4 sealing rings. The price on these are $45.00 each. There is also a $8.00 shipping and handling charge per order.
These are 100% Made in the USA. If you have any questions or want to place an order email mrrandyj@aol.com Thanks for looking!!!


Attachments
20150415_180328.jpg

20150415_182348.jpg



Top
#2329819 - 07/01/17 02:57 PM Re: Race Parts For Sale - 3rd Quarter [Re: mrrandyj]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1171
Loc: CT
904 BILLET REAR SERVO KIT

High performance low/reverse billet rear servo kit for a 1967 and newer 904, 998, 999, 500, 42RH, 42RE, 44RH, 44RE Dodge Plymouth Chrysler Jeep or AMC transmission. This rear servo kit features a redesigned 1-piece piston which replaces the stock piston, inner spring, piston plug, snap ring, and the after market shim used in performance rebuilds. It is CNC machined out of solid billet aluminum so it will not crack like the stock cast aluminum pistons are known for doing. You will also get much less internal leakage with the solid 1 piece piston compared to the stock assembly, that means more holding power for the rear band. Included in this kit is the piston, a heavy duty return spring that will help eliminate the 1-2 shift overlap, a new seal, and a .075” extra thick stainless steel retainer that will not bend around the retaining ring and pop out of the case like the factory steel retainers do. This is a complete ready to install kit, no extra parts are needed and it is 100% Made in the USA. The price for this kit is $75.00. There is also a $8.00 per order shipping charge.

If you have any questions, or would like to place an order, please email me at mrrandyj@aol.com Thanks!!!


Attachments
904 Rear Servo Kit Assembled.jpg



Top
#2329820 - 07/01/17 02:58 PM Re: Race Parts For Sale - 3rd Quarter [Re: mrrandyj]
mrrandyj Offline
super stock

Registered: 01/20/03
Posts: 1171
Loc: CT
727-48RE FRONT BAND STRUTS AND BILLET BAND ANCHORS

Heavy duty, double thick, billet steel front band strut and billet front band anchor for a Dodge, Plymouth, Chrysler, or AMC 727, 518, 618, 46RH, 46RE, 47RH, 47RE, and 48RE transmissions. This fits from the 1962 727 transmission, all the way up through the 2007 ½ Cummins Turbo Diesel 48RE, and everything in between. The OEM Chrysler front band struts are prone to bending, and the OEM band anchors are known for breaking in high performance and heavy duty applications. The band strut is CNC machined from 1/4” thick steel, which is twice as thick as the factory strut and it is black oxide coated for corrosion protection. The band anchor is also CNC machined from billet steel. Both are made in the USA. The price is $25.00 each, and includes shipping anywhere in the USA.
Email mrrandyj@aol.com


Attachments
20170419_173122.jpg

20170330_184752.jpg



Top
#2329837 - 07/01/17 03:40 PM R3 Arrow Timing Chain Cover for R Series Race Blocks [Re: mrrandyj]
Rocket Offline
mopar

Registered: 02/25/06
Posts: 428
Loc: CT
This is a new Arrow aluminum timing chain cover for Mopar R series racing blocks with 9.0" to 9.2" deck heights.

Price is $275 shipped in the lower 48 states. I will ship internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com for more information or pictures.


Attachments
P1040695.JPG

P1040700.JPG



Top
#2330038 - 07/01/17 11:20 PM 440/512 Short Block [Re: Rocket]
Dragula Offline


Registered: 05/02/04
Posts: 9978
Loc: Taxes R-US, NY
Sorry....Looks like I might need this.

This is a 440 Source 440/512 engine with girdle and all good parts. It is a pump gas engine when used with Indy EZ1 heads. Comes in at 10.8:1...No cam or lifters as I borrowed that for my other engine, but cam bearings are like new. No oil pump presently, but a brand new Melling one can be installed for full asking price with my used Milidon cover and the 9 quart oil pan and line,

Freshened 2 seasons ago and only 11 passes on it this season. when it was pulled. Best Et was 9.70 at 138.5mph.

Can be freshened again at new owners expense. Hone still looks real good. Well taken car of.

Available items that can go with it for a little extra....

Port matched Indy 4500 intake
Port matched Indy 4150 intake
Milodon Oil pan and oiling system
Indy valley pan
MSD distributor
Quick Fuel Annular 950 carb

Could also be built with your your choice of cam at your cost...


Attachments
KIMG0246.JPG




Edited by Dragula (07/30/17 01:42 PM)
_________________________
'71 Duster Pump Gas 512RB
https://www.youtube.com/watch?v=Z_XTmRBuvWs (6.19)
https://www.youtube.com/watch?v=gQZGfDBPROM (9.70 at 138.5mph)

'70 Cuda NO Hemi, again
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.31)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

Top
#2330117 - 07/02/17 09:10 AM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2683
Loc: Blue Ridge, VA
Koni 8212 1123 SPA1 double adjustable shocks
Stroke: 7.00" Max Length: 19.50" Min Length: 12.50" Ride Height: 16.00"
w/ Eibach 14" 130lb. springs, very good condition, $650

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Koni DA Shocks.JPG


_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2330118 - 07/02/17 09:11 AM Re: Race Parts For Sale - 3rd Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2683
Loc: Blue Ridge, VA
Moroso #65000 4150-4500 2" carb adapter w/ Mr. Gasket #6004 Dominator safety plate and usable gaskets, used, very good condition, $50

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Moroso Carb Adapter.JPG


_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2330119 - 07/02/17 09:11 AM Re: Race Parts For Sale - 3rd Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2683
Loc: Blue Ridge, VA
Aeromotive Fuel Filter #12612 -10AN bulkhead w/ 100 micron filter, brand new, only opened for pic, mounts inside your tank or cell, $65
PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Aeromotve 12612 Fuel Filter.JPG


_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2330120 - 07/02/17 09:12 AM Re: Race Parts For Sale - 3rd Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2683
Loc: Blue Ridge, VA
9.00" - 9.56" Deck R3/Weber Belt Drive Motorplates, water jet cut from 1/4" T6061 aluminum. 36" wide centered for tube chassis application or marked for A-Body offset. Can be trimmed to fit any application. Use this plate along with Brian Smith (Smith Innovation) water pump spacers to complete the set up. Only 1 remaining in stock $160ea. plus shipping

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Plumb Wired Weber Belt Drive Motorplate.jpg


_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2330122 - 07/02/17 09:13 AM Re: Race Parts For Sale - 3rd Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2683
Loc: Blue Ridge, VA
Moroso Ultra 40 Spark Plug Wires #73815, Spiral Core, 8.65mm, Black, 180 Degree Boots, Universal V8 set, NEW, $65

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Moroso Ultra 40 Wires.JPG


_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2330124 - 07/02/17 09:14 AM Re: Race Parts For Sale - 3rd Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2683
Loc: Blue Ridge, VA
Autometer Super-Lite LED shift lite #5333, new, $60

Autometer Ultra Lite 2 5/8" Gauge Brake Pressure #4426, mechanical, used, $50

Autometer temp sender #2252, 1/8" npt for use w/ electric water temp gauge, new, $15

VDO MegaLite shift light w/ chromoly mount fits 1 1/4" steering shaft w/ t-bolt clamp, used, $80

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray


Attachments
Autometer & VDO.JPG




Edited by Plumb Wired (07/03/17 08:24 AM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2330125 - 07/02/17 09:15 AM Re: Race Parts For Sale - 3rd Quarter [Re: Plumb Wired]
Plumb Wired Offline
master

Registered: 01/20/03
Posts: 2683
Loc: Blue Ridge, VA
Ritter fabricated aluminum W8 valve covers w/ fill bungs & vacuum pump fitting. The tops are slightly warped and I would recommend milling the flanges to assure a good gasket seal. I'll throw in a couple sets of used Fel-Pro gaskets, $225.00 Shipped

Paypal (+3%) & US Postal Money Orders accepted

email: mgray0918@verizon.net or PM me thru Moparts

Thanks,
Mike Gray


Attachments
Ritter W8 Valve Covers.JPG




Edited by Plumb Wired (09/04/17 02:31 PM)
_________________________
RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST

Top
#2330156 - 07/02/17 10:37 AM Re: Race Parts For Sale - 3rd Quarter [Re: moparts]
gtea1901 Offline
member

Registered: 11/26/04
Posts: 72
Loc: PORT ORANGE FL.
BB Mopar Crane Ultra Pro Roller lifters new in the box $550.00 SOLD
PDP-16T Dura-Bond coated cam bearings for small block $50.00
MS1277HG full groove main bearins 426-440 $90.00
Siemens Deka 80 lb. injectors set of 8 new $300.00
MSD 8973 boxes used $300.00
11 quarts of XPO Joe Gibbs Driven oil $150.00
Gold Rush Slick Mounts used $150.00 pr.


Call Denny (386) 957-3879 or (717) 676-3349


Edited by gtea1901 (07/05/17 03:03 PM)
_________________________
stewardperformance.com

Top
Page 1 of 12 1 2 3 11 12 >

Advertisement
Sponsored Link
Forum Stats
24,895 Registered Members
32 Forums
184,140 Topics
2,132,950 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
66-70 B Body Trunk Dividers
by 71TA
Today at 12:48 AM
Advice on business idea
by SeaninSD
Today at 12:31 AM
64 Dodge Pick Up - Leaning Tower of Power
by 65pacecar
Today at 12:12 AM
67 Belvedere I
by 65pacecar
Today at 12:11 AM