Page 1 of 26 1 2 3 25 26 >
Topic Options
#2329559 - 07/01/17 09:03 AM E Body - Parts For Sale - 3rd Quarter
moparts Offline


Registered: 01/19/03
Posts: 13761
Loc: Norwich CT USA
up

Top
#2329627 - 07/01/17 09:43 AM E-Body Pure Zinc Interleaves for Leaf Spring Rebuild [Re: moparts]
kentj340 Offline
pro stock

Registered: 03/04/11
Posts: 1241
Loc: Houston
E-Body Pure Zinc Interleaves for Leaf Spring Rebuild

All interleaves are made from 99.5+% pure soft zinc sheet, same as the originals.

#E4 – Exact reproduction of the 10 pure zinc interleaves that came in the 024/034 factory springs for 426, 440 and other engines with axle packages, $77.30.

#TA – Exact reproduction of the 8 pure zinc interleaves that came in the factory springs for AAR/TA, $61.85.

#E8 – Car set of 8 pure zinc interleaves for springs with 4-1/2 steel leaves each side, $61.85.

#EC – Car set of pure zinc interleaves custom made to exactly reproduce your old zinc using information you provide, $77.30 for 10, $61.85 for 8.

#XL – One pure zinc interleaf, long, $7.73. Order two for springs with one extra leaf each side.

Add shipping by USPS Priority mail $13.60 per car set.

Contact kjohnst at postal dot net.


Attachments
Pure Zinc Interleaves1.JPG


_________________________
If you don't see two dolphins, you need a vacation.

Top
#2329633 - 07/01/17 09:51 AM Restored 1971 HEMI Carburetors [Re: kentj340]
DPS_1 Offline
member

Registered: 11/05/05
Posts: 92
Loc: Arizona
I have a matched pair of HEMI AUTO Carburetors for a 1971 Cuda, Challenger, Charger, GTX or other B-Body MOPAR [P/N 4970S Dated Week 39 of 1970 and 4971S Dated Week 40 of 1970]. The carburetors have been meticulously restored by Brian Brady. Each carburetor has a Carter Specification sheet included. These carburetors are rare and hard to find in this state. I am offering these carburetors for $7500.00 plus shipping and insurance. Please contact me if you have questions via email at dpsuozzi@gmail.com or by phone at 520-885-1176
I have more pictures of these HEMI carburetors, plus the specification sheets available for viewing.


Attachments
HEMI 4970S & 4971S No. 2.jpg

HEMI 4971S No. 1.jpg

P1016157.JPG

P1016163.JPG




Edited by DPS_1 (08/04/17 08:37 PM)

Top
#2329646 - 07/01/17 10:09 AM VIN Rivets [Re: moparts]
GregPurcell Offline
member

Registered: 10/13/03
Posts: 97
Loc: Ellabell,GA (near Savannah)


Edited by GregPurcell (07/01/17 10:14 AM)

Top
#2329748 - 07/01/17 01:10 PM REBUILT Lower & Upper Control Arms. Sway Bar. Strut Rods. [Re: moparts]
hemi71x Offline


Registered: 01/20/03
Posts: 4790
Loc: Rancho Cordova, California (Sa...
**UPDATE TO THIS AD**
The LCA's have SOLD.
The UCA's have SOLD.
The Strut Rods have SOLD
The Sway Bar & parts have SOLD.
No need to inquire, ask about them any longer.
The rest of the parts are still up for grabs.


My current pair of Sway Bar LCA's that i have for sale, UCA's, Strut Rods, Idler Arm

These are a pair of rebuilt lower control arms with sway bar mount tabs that are used on 1970 to 1972 B-body cars, Charger, Coronet, Road Runner, GTX,Super Bee, Satellite, Belvedere.

And also for 1970-1974 Barracuda's and Challenger's.

These parts are original to a 1970 Plymouth Cuda, if that means anything to you.

These are one of the best pairs of LCA's that i have pulled off a vehicle, cleaned up, bead cleaned back to bare metal, rebuilt, and put up for sale.

The UCA's and LCA's have new busings installed, and the uppers have new ball joints.
Strut rod bushings are near new, out of my stash of suspension & brake parts.

I have cleaned these control arms of 47 years of grease and grime, plus they have been bead cleaned back to bare metal, then painted up in black.

These control arms are not rust pitted pieces of junk like you find in the rust belt states here in America. These are one of the nicest pairs of lower control arms that i have come across, and rebuilt for re-sale. You can't go wrong starting out with parts from California, Nevada, Arizona, out here in the western states.

So if you factor in what it took to bust these LCA's off the car in the wrecking yard, then paying for them, buying the bushings, and rebound bumpers,doing the press work on the bushings, i need to see $300.00 for these parts. If you don't know how to rebuild these lower control arms it can be a pain in the butt to get them done.

I have a shop hydraulic press, and the factory tools to get these done correctly. Shop labor rates are $120.00 an hour where i'm at, and if i charged you 1/4 that it would be low. I have already done all the hard, dirty work for you. This is what i do as a professional auto mechanic, to help pay the bills in this life on planet earth, and to support my other hobbies, and buying other things here on this site. I can't pay my rent, go to the gas station, or grocery store, working for free, or minimum wages.

The price is "firm." I'm not interested in any kind of trades, offers, other than my stated price.

300.00 for the LCA's, + the FEDEX'ing to your zip code, with insurance, and signature delivery charges applied, + 3% Pay Pal fee.

I can be contacted thru this forum, by sending me a private message, and then i can send you all the rest of the necessary information.


$20.00 Idler Arm


Thank's a lot.
JimV.


Attachments
LCA's UCA's Sway Bar Strut Rods 031 (Copy).JPG

LCA's UCA's Sway Bar Strut Rods 001 (Copy).JPG

LCA's UCA's Sway Bar Strut Rods 014 (Copy).JPG

LCA's UCA's Sway Bar Strut Rods 028 (Copy).JPG




Edited by hemi71x (08/14/17 09:25 PM)
_________________________

RF-4C Phantom 69-370 Zweibrucken, Germany

Top
#2329753 - 07/01/17 01:16 PM REBUILT Lower Control Arms 70-74 E Body 62-72 B Body Cars [Re: moparts]
hemi71x Offline


Registered: 01/20/03
Posts: 4790
Loc: Rancho Cordova, California (Sa...
SOLD SOLD SOLD SOLD SOLD SOLD

My current pair of LCA's that i have for sale.

These are a pair of rebuilt lower control arms that are used on 1962 to 1972 B-body cars, Charger, Coronet, Road Runner, GTX,Super Bee, Satellite, Belvedere.
And also for 1970-1974 Barracuda's and Challenger's.

I recently found this pair on a 1964 Plymouth Sport Fury, if that means anything to you.
These are one of the best pairs of LCA's that i have pulled off a vehicle, cleaned up, Evaporusted back to bare metal, rebuilt, and put up for sale.

I have cleaned these control arms of 53 years of grease and grime, plus they have been cleaned of all the surface rust in a product called Evaporust.
You paint them up with whatever texture, and color paint that you prefer.
Some people are pretty anal in what they want to do, so I'm leaving that up to you'

These control arms are not rust pitted pieces of junk like you find in the rust belt states here in America. These are one of the nicest pairs of lower control arms that i have come across, and rebuilt for re-sale. You can't go wrong starting out with parts from California, Nevada, Arizona, out here in the western states.

So if you factor in what it took to bust these LCA's off the car in the wrecking yard, then paying for them, buying the bushings, and rebound bumpers,doing the press work on the bushings, i need to see $240.00 for these parts. If you don't know how to rebuild these lower control arms it can be a pain in the butt to get them done.

I have a shop hydraulic press, and the factory tools to get these done correctly. Shop labor rates are $120.00 an hour where i'm at, and if i charged you 1/4 that it would be low. I have already done all the hard, dirty work for you. This is what i do as a professional auto mechanic, to help pay the bills in this life on planet earth, and to support my other hobbies, and buying other things here on this site. I can't pay my rent, go to the gas station, or grocery store, working for free, or minimum wages.

The price is "firm." I'm not interested in any kind of trades, offers, other than my stated price.

$240.00 for the parts, + the FEDEX'ing to your zip code, with insurance, and signature delivery charges applied, + 3% Pay Pal fee.

I can be contacted thru this forum, by sending me a private message, and then i can send you all the rest of the necessary information.

Thank's a lot.
Jim V


Attachments
LCA's B & E Body #4 001 (Small).JPG

LCA's B & E Body #4 002 (Small).JPG

LCA's B & E Body #4 006 (Small).JPG

LCA's B & E Body #4 007 (Small).JPG




Edited by hemi71x (08/14/17 09:28 PM)
_________________________

RF-4C Phantom 69-370 Zweibrucken, Germany

Top
#2329771 - 07/01/17 01:40 PM 1971 Cuda bucket seats [Re: hemi71x]
Finoke Offline
master

Registered: 01/21/03
Posts: 3931
Loc: Horsham, Pa.
1971 Cuda Bucket seats. Older upholstery but Vinyl is still soft. Seats are nice but there is a small split in one of the seat bottoms center seam. Approximately 2".

Comes with seat backs and tracks. Good as is for a driver.

Must pick up in Horsham Pa near Philly or I can take to Carlisle if they are prepaid.

$850. I accept paypal.

thanks
Tom


Attachments
20170501_095001.jpg


_________________________
1971 FC7 V6X 'Cuda Convertible

Top
#2329773 - 07/01/17 01:41 PM REBUILT "Wide Mouth" Disc Brake Calipers 70 AAR T/A [Re: moparts]
hemi71x Offline


Registered: 01/20/03
Posts: 4790
Loc: Rancho Cordova, California (Sa...

These are a rebuilt pair of original, OEM disc brake calipers that are used on 1970 and early build 1971 B & E body automobiles.
Cuda, Challenger, Charger, and the other B body line of cars.

Calipers are what's known as the "Wide Mouth" design castings, that were used in 1970, and early build 71's.
A one year only design on the 70 E & B body line of cars, when they changed over to the standard design, which everyone is most familiar with.

I have had these calipers in my 35 + year collection of parts that i saved, hoarded, collected, scrounged, rat holed, for decades, that i have just taken off the storage shelving, and rebuilt them for sale.
This pair are one of two pairs, of the wide mouth caliper design that i ever had in all these years.
This pair was original to a 70 T/A Challenger that i got off a car in a wrecking yard in the late 1970's or early 1980.

Positioner pins, (bolts) are all the correct ones in their design for the 1970 calipers.
One of the positioner's is period correct, with the "flat" design, but 3 of the others are not, and are the later concave design.

Shipping will be by FEDEX, with insurance, and signature delivery fees, factored in.

$500.00 for the pair, with all the hardware.
That's the price.
Not interested in any "offers", trades, or low ball offers on these parts.
Sold my other pair that i had for that amount, and this is the price for what's currently advertised also.

Payment by postal money order, or cashiers check, from your bank, or if you pick up in person, a whole mess of hundred dollar bills will do.

Send me a pm, if your a serious buyer, and not a shopper, look-e-loo, or tire kicker.
Or.
Nine One Six, Eight Five Two, One Seven Five Eight.
During the evening time hours of 5:30 - 7:30 PM (Pacific Time) only.

Thank's a lot.
Jim V.
hemi71x


Attachments
70 Calipers AAR & TA 006 (Copy).JPG

70 Calipers AAR & TA 009 (Small).JPG

70 Calipers AAR & TA 001 (Copy).JPG

70 Calipers AAR & TA 012 (Copy).JPG


_________________________

RF-4C Phantom 69-370 Zweibrucken, Germany

Top
#2329867 - 07/01/17 05:11 PM NOS Holley MECHANICAL Center 6 Pack, 6bbl. Carburetor #4782 [Re: moparts]
hemi71x Offline


Registered: 01/20/03
Posts: 4790
Loc: Rancho Cordova, California (Sa...
I have an NOS, new in the box, Holley center, 6 Pack, 6 BBL, Mechanical carburetor, #4782 up for sale.
These carburetors were the competition, performance, race, carbs over the production street versions.
Rated at 500 CFM.
The fuel inlet is on the Left side of the float bowl, not like the production 340, 440, street versions.
The outboard carburetors did not have vacuum pods on them, hence the term mechanical carburetors.
Holley hasn't produced these in years, so they are very difficult to find, in this day and age.
$600.00 + Pay Pal, and FEDEX'ing with insurance, and signature delivery charges on the package.
That's the price.
Not interested in any "trades" low ball "offers" for this part.
Interested, serious buyers, send me a pm thru this forum.
Thank's
Jim V.tor


Attachments
Holley Mechanical Carb 001 (Small).JPG

Holley Mechanical Carb 002 (Small).JPG

Holley Mechanical Carb 005 (Small).JPG

Holley Mechanical Carb 004 (Small).JPG


_________________________

RF-4C Phantom 69-370 Zweibrucken, Germany

Top
#2329878 - 07/01/17 05:34 PM Re: E Body - Parts For Sale - 3rd Quarter [Re: moparts]
6PAX Offline
master

Registered: 01/20/03
Posts: 4436
Loc: Metro Detroit
72-74 E-body bucket seat tracks. Nice shape. $250

NOS Challenger T/A front chin spoilers. $300

1970-71 Challenger deck lid with wing cutouts. Does not have T/A spoiler cutouts. Very nice shape. $400 Pick-up only.

Two sets of new E-body side-view mirror mounting screws for 70-74 E-bodies/71-72 B-bodies. $15 a set.

E-body disk brake assemblies with rotor, calipers, spindles. dust shields, etc. Not sure of year but I think 72 or 73. $300

1970 Challenger driver side taillight lens. $75

1971 Challenger painted gas cap. $35

1970 E-body dash woodgrain decals. $40

70 Challenger dash speaker grill #2984783. $50

Shaker hood six pack air cleaner base plate support brackets. New. $75

1971 Challenger passenger side rear quarter molding. $35

Challenger taillight harness. $50

E-body glove box lamp and lens. $30

One pair of E-body wire harness retaining brackets that go on the sides under the rear seat. $30

71 B/E-body ignition light harness complete with delay harness. $75

E-body heater box vent cable. $20

Woodgrain standard dash gauge panel and switch panel from a Barracuda Gran Coupe convertible. Has headlight, dimmer and wiper switches and the fourth hole labeled top-lift. $200

71-74 E-body driver's side dash bezel. $50

Original E-body bumper jack anti-rattle felt. $15

New 440 Six Pack shaker emblems 3462491 3462492. $150

NOS horn relay/ignition buzzer 3513206. $50

72-74 E-body steering wheel. The grip and spokes are in real nice shape $125

Nice original E-body black passenger side kick panel. $40

Challenger passenger side and driver's side front parking lens. $25 each

New reproduction black E-body kick panels. $75

1971 E-body radiator #3443972. $100

Pair of chrome E-body door lock levers. $20

2 Pair of new E-body horn brackets, 1 long style, 1 short style. $20 pair

Challenger driver side front side marker assembly. Lens cracked and plug is missing but bezel has good chrome. $25

New MAS Racing Cuda chin spoilers. $40

1971 Dodge body and chassis service manuals. Originals not reprints. Nice shape. $75

New 1970 Challenger illustrated facts and features manual. $10

ERTL Hobby Edition 1/18th scale model B5 blue 440 six pack 1970 Challenger R/T. 1 of 2500. With original box. $35

Chilton's 1965-72 Barracuda/Challenger repair and tune-up guide. As-new condition. $50

1970 Challenger R/T Dream Machines trading card #29. $3

Prices do not include shipping. gt340 at yahoo.com


Edited by 6PAX (08/01/17 10:55 PM)

Top
#2329935 - 07/01/17 07:35 PM Re: E Body - Parts For Sale - 3rd Quarter [Re: moparts]
biggE Offline
mopar

Registered: 12/08/04
Posts: 698
Loc: California
1970 E Body only front power disc brake master cylinder cast # 2229171. Older rebuild in nice shape. Pending sale. PM me or eric0890@att.net. Thanks


Attachments
20170603_130245.jpg

20170603_130115.jpg




Edited by biggE (07/04/17 08:47 AM)

Top
#2329980 - 07/01/17 09:24 PM Re: E Body - Parts For Sale - 3rd Quarter [Re: moparts]
1rustedrt Offline
member

Registered: 12/24/04
Posts: 108
Loc: martinsville Indiana
Loc: martinsville Indiana

1970 challenger SE back side of hood SE trim piece polished ready to install no dents or scratches very nice hard to find $160.

1970 OEM challenger grill in good shape $75.00

1970 OEM challenger headlight bezels. $25 ea. r-l

1970-74 challenger new in box longitude stripe kit color. $30.00

1970-74 challenger exterior windshield upper trim r&l $20.00 for pair [sold]

1970-74 challenger cuda passenger side quarter window regulator, with guide, and anti rattle channel for back side of window. $20.00

challenger 1970-74 door window regulator R or L very good condition $15 ea

26"OEM radiator FOR CHALLENGER CUDA for small block has new 3 row core. no leaks looks nice $55.00

1970-74 challenger cuda heater a/c box with cores and fan. $25.00

1970- 74 cuda safety catch for hood $15.00

1970 challenger hood release $25.00

1970-74 challenger trunk latch $10.00

will be posting my extra parts as i finish up my ride
can send pictures on request,will consider offers on any parts listed

prices do not include shipping. open to offers on any parts listed

have lots of other parts also most in good usable shape email rdapr17556@aol.com

Top
#2329982 - 07/01/17 09:25 PM Upper Control Arm Adjuster Mounting Bolts & Washers. [Re: moparts]
hemi71x Offline


Registered: 01/20/03
Posts: 4790
Loc: Rancho Cordova, California (Sa...
These are a set of four, upper control arm adjuster mounting bolts and washers, that are used on the following Mopar automobiles.

1970 - 1974 Barracuda & Challenger, E Body cars.

1962 - 1972 Charger, Super Bee, Roadrunner, GTX, Satellite, Belvedere, Coronet, all the B Body line of cars.

1962- 1976 Duster, Dart, Demon, Valiant, Scamp, Swinger, all the A Body line of cars.

Excellent factory parts for all you guys living in the rust bucket states, when your replacing the bushings in your upper control arms.

$25.00 for the parts, + $7.25 for the mailman, (In the USA), + 3% Pay Pal.

Send me a pm, and i can then send you my payment e mail address.
Thank's a lot.


Attachments
Control arm bolts #1 (Small).jpg

Control arm bolts #2 (Small).jpg


_________________________

RF-4C Phantom 69-370 Zweibrucken, Germany

Top
#2329998 - 07/01/17 09:50 PM Re: E Body - Parts For Sale - 3rd Quarter [Re: moparts]
chally142 Offline
member

Registered: 08/04/16
Posts: 90
Loc: here
Original Challenger front license plate bracket. Part number 2962336.
Has pitting, but nobody will see it and has been powdercoated, so it won't get any worse. Overall a very good, solid piece. They used a lot of metal back in the day. The plastic retainers for the screws and rubber bump stops are all there. You just need to install.
Price: $25 plus shipping
Email: chally_142@hotmail.com

20170519_074250-1280x720

20170519_074315-1280x720

20170519_074330-1280x720

Two reproduction Chrysler paper floor protector mats. "Customer Care"
Measure 17" x 15"
Price for both: $15 plus shipping
Email: chally_142@hotmail.com

20170519_074507-1280x720

Original Challenger interior door lock. Rechromed. All you need to do is put black paint inside the lettering and arrow.
Price $25 plus shipping
Email: chally_142@hotmail.com

20170519_081147-720x1280

20170519_081152-1280x720

Vacuum choke pull off from a 1970 Dodge Challenger Big Block, but could fit other makes and models. It's used and works fine. Comes with an original box.
Price: $10 plus shipping
Email: chally_142@hotmail.com

20170519_080752-1280x720

Top
#2329999 - 07/01/17 09:52 PM Re: E Body - Parts For Sale - 3rd Quarter [Re: chally142]
chally142 Offline
member

Registered: 08/04/16
Posts: 90
Loc: here
SE rear window glass. Typical light scratching. Can be polished out. Very good cond. They don't reproduce these.
Price:$250 plus shipping
Email: chally_142@hotmail.com

SE Rear Window
 
Four used OEM 14" trim rings. They have the typical small dings and scratches that can be found in used rings, but overall in really good shape compared. There is a guy on here who restores them and would be an easy resto compared to a lot more beaten up rings you see out there.
The outer thin part has the polished finish, while the inner part has the brushed finish. The outside diameter is 15 1/4" & is 2 1/4" tall resting on the counter. The inside diameter of the brushed part is 12" & the sides of the brushed part are 2 3/8" long. Selling all 4 as a set. Will not separate.
Price: $495
Email: chally_142@hotmail.com
 
Trim Ring 4

Trim Ring 3

Trim Ring 2

Trim Ring 1


Edited by chally142 (08/03/17 10:25 AM)

Top
#2330000 - 07/01/17 09:55 PM Re: E Body - Parts For Sale - 3rd Quarter [Re: chally142]
chally142 Offline
member

Registered: 08/04/16
Posts: 90
Loc: here
Assorted parts. See pictures for details. Everything from clips to grommets to brackets and so on. Parts are for or came off of a 1970 Dodge Challenger, but could fit other makes and models. Selling everything together; will not separate.
Price: $100 plus shipping
Email: chally_142@hotmail.com

20170519_083220-1280x720

20170519_083224-1280x720

20170519_083229-1280x720

20170519_083232-1280x720

20170519_083238-1280x720

20170519_083242-1280x720

20170519_083246-1280x720




Edited by chally142 (08/03/17 10:30 AM)

Top
#2330002 - 07/01/17 09:57 PM Re: E Body - Parts For Sale - 3rd Quarter [Re: chally142]
chally142 Offline
member

Registered: 08/04/16
Posts: 90
Loc: here
1970 Dodge Challenger OEM Battery Tray Lower Support Bracket. In very good shape. Just needs to be sandblasted and painted. May fit other makes/models. Price: $10 plus shipping
Email: chally_142@hotmail.com

Battery tray bracket1

Battery tray bracket

1970 Dodge Challenger OEM Used Brake Light Wiring Harness. Taken off a car in 2005. May fit other years/makes/models. Price: $75 plus shipping
Email: chally_142@hotmail.com

Brake light wiring harness

Mopar Chrysler Dodge Plymouth Clutch, Brake, Emergency Brake Pedal Pads. The brake/clutch pad is numbered 2950887. The emergency brake pads are numbered 2996053. In very good condition. Just need to be cleaned up. Price: $25 plus shipping
Email: chally_142@hotmail.com

BrakeClutchEmerPedal Pads

BrakeClutchEmerPedal Pads1


Edited by chally142 (08/03/17 10:36 AM)

Top
#2330004 - 07/01/17 09:59 PM Re: E Body - Parts For Sale - 3rd Quarter [Re: chally142]
chally142 Offline
member

Registered: 08/04/16
Posts: 90
Loc: here
Disc Brake Calipers OEM. First caliper: Cast 346 (Friday 12/12/69); machined/assembled/inspected 51 0 (Friday 2/20/70). Second caliper: Cast 20 (Tuesday 1/20/70) machined/assembled/inspected 57 0 (Thursday 2/26/70). The "2" in the sequence of stamped numbers on both calipers denotes assembly shift or line. Price: $375 plus shipping
Email: chally_142@hotmail.com

Caliper6

Caliper8

Caliper7

Caliper5

Caliper3

Caliper2


Edited by chally142 (08/03/17 10:39 AM)

Top
#2330006 - 07/01/17 10:01 PM Re: E Body - Parts For Sale - 3rd Quarter [Re: chally142]
chally142 Offline
member

Registered: 08/04/16
Posts: 90
Loc: here
Mopar Chrysler Dodge Plymouth Dash Bulbs, #57. Partial pack with 6 left. Brand new. Price: $8 plus shipping
Email: chally_142@hotmail.com

Dashbulbs

1968 to 1970 Mopar Chrysler Dodge Plymouth Disc Brake Hold Off Valve OEM. This valve was removed from a 1970 Dodge Challenger with disc brakes. Used on all Mopar passenger cars from 1968-70 with the disc brake option. For holding off pressure to the rear brakes so the front brakes would go on a split second before. Considered a correction valve for the 1968-70 model year. During extreme braking conditions, this valve prevented the car from spinning out and evened out braking loads. Has production markings. Not sure how to read the codes, so you’ll need to determine. Price: $75 plus shipping
Email: chally_142@hotmail.com

Disc brake hold off valve

Disc brake hold off valve1

Top
#2330008 - 07/01/17 10:03 PM Re: E Body - Parts For Sale - 3rd Quarter [Re: chally142]
chally142 Offline
member

Registered: 08/04/16
Posts: 90
Loc: here
1970 Dodge Challenger OEM Engine Wiring Harness for electronic ignition. In good used condition. Will need to be rebuilt. Will need to be rebuilt. May fit other years/makes/models. Price: $75 plus shipping
Email: chally_142@hotmail.com

Engine wiring harness

1970 Dodge Challenger Headlight Wiring Harness OEM. In good used condition. Wires are still flexible and connectors in good shape. Would need to be restored. May fit other years/makes/models. Price: $75 plus shipping
Email: chally_142@hotmail.com

Headlight wiring harness

Top
Page 1 of 26 1 2 3 25 26 >

Advertisement
Sponsored Link
Forum Stats
24,903 Registered Members
32 Forums
184,386 Topics
2,136,467 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Advise on setting cedar posts
by StrokerPost
10/24/17 01:21 AM
Ok, so who all is going to Fall Fling??
by dart4forte
10/24/17 12:33 AM
Dome light glows when map light is off
by 3XBlack6packGTX
10/24/17 12:32 AM
Converting rims to bead locks, who does that?
by Cab_Burge
10/24/17 12:14 AM